This benchmarks only slightly faster than the old git-annex. Eg, for a 1
gb file, 14.56s vs 15.57s. (On a ram disk; there would certianly be
more of an effect if the file was written to disk and didn't stay in
cache.)
Commenting out the updateIncremental calls make the same run in 6.31s.
May be that overhead in the implementation, other than the actual
checksumming, is slowing it down. Eg, MVar access.
(I also tried using 10x larger chunks, which did not change the speed.)
This is groundwork for calculating checksums while copying, rather than
in a separate pass, but that's not done yet. For now, avoid using rsync
(and cp on Windows), and instead read and write the file ourselves, with
resume handling.
Benchmarking vs old git-annex that used rsync, this is faster,
at least once the file size is larger than a couple of MB.
Changing to the P2P protocol broke this, because preseedTmp copies
the local copy of the object to the temp file, and then the P2P transfer
sees the right length file and uses it as-is.
When git-annex-shell is too old and rsync is used, it did verify the
content, and when the local repo does not have the object it did verify the
content.
This could perhaps have caused a hard link to be made when the content
of the object was modified. I don't think that actually happened,
because the annexed file would have to be unlocked, with annex.thin, for
the object to get modified, and in that case, a hard link is not made.
However, to be sure, run the check.
Note that it seemed best to run the check only once, although the
current implementation is fast and safe to run repeatedly.
Checksum as content is received from a remote git-annex repository, rather
than doing it in a second pass.
Not tested at all yet, but I imagine it will work!
Not implemented for any special remotes, and also not implemented for
copies from local remotes. It may be that, for local remotes, it will
suffice to use rsync, rely on its checksumming, and simply return Verified.
(It would still make a checksumming pass when cp is used for COW, I guess.)
When annex.stalldetection is not enabled, and a likely stall is detected,
display a suggestion to enable it.
Note that the progress meter display is not taken down when displaying
the message, so it will display like this:
0% 8 B 0 B/s
Transfer seems to have stalled. To handle stalling transfers, configure annex.stalldetection
0% 10 B 0 B/s
Although of course if it's really stalled, it will never update
again after the message. Taking down the progress meter and starting
a new one doesn't seem too necessary given how unusual this is,
also this does help show the state it was at when it stalled.
Use of uninterruptibleCancel here is ok, the thread it's canceling
only does STM transactions and sleeps. The annex thread that gets
forked off is separate to avoid it being canceled, so that it
can be joined back at the end.
A module cycle required moving from dupState the precaching of the
remote list. Doing it at startConcurrency should cover all the cases
where the remote list is used in concurrent actions.
This commit was sponsored by Kevin Mueller on Patreon.
This is to support, eg a borg repo as a special remote, which is
populated not by running git-annex commands, but by using borg. Then
git-annex sync lists the content of the remote, learns which files are
annex objects, and treats those as present in the remote.
So, most of the import machinery is reused, to a new purpose. While
normally importtree maintains a remote tracking branch, this does not,
because the files stored in the remote are annex object files, not
user-visible filenames. But, internally, a git tree is still generated,
of the files on the remote that are annex objects. This tree is used
by retrieveExportWithContentIdentifier, etc. As with other import/export
remotes, that the tree is recorded in the export log, and gets grafted
into the git-annex branch.
importKey changed to be able to return Nothing, to indicate when an
ImportLocation is not an annex object and so should be skipped from
being included in the tree.
It did not seem to make sense to have git-annex import do this, since
from the user's perspective, it's not like other imports. So only
git-annex sync does it.
Note that, git-annex sync does not yet download objects from such
remotes that are preferred content. importKeys is run with
content downloading disabled, to avoid getting the content of all
objects. Perhaps what's needed is for seekSyncContent to be run with these
remotes, but I don't know if it will just work (in particular, it needs
to avoid trying to transfer objects to them), so I skipped that for now.
(Untested and unused as of yet.)
This commit was sponsored by Jochen Bartl on Patreon.
Done on unix, could not implement it on windows quite.
The signal library gets part of the way needed for windows.
But I had to open https://github.com/pmlodawski/signal/issues/1 because
it lacks raiseSignal.
Also, I don't know what the equivilant of getProcessGroupIDOf is on
windows. And System.Process does not provide a way to send any signal to
a process group except for SIGINT.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
All callers adjusted to update it themselves.
In Command.ReKey, and Command.SetKey, the cleanup action already did,
so it was updating the log twice before.
This fixes a bug when annex.stalldetection is set, as now
Command.Transferrer can skip updating the location log, and let it be
updated by the calling process.
Added annex.adjustedbranchrefresh git config to update adjusted branches
set up by git-annex adjust --unlock-present/--hide-missing.
Note, in a few cases, I was not able to make the adjusted branch
be updated in calls to moveAnnex, because information about what
file corresponds to a key is not available. They are:
* If two files point to one file, then eg, `git annex get foo` will
update the branch to unlock foo, but will not unlock bar, because it
does not know about it. Might be fixable by making `git annex get
bar` do something besides skipping bar?
* git-annex-shell recvkey likewise (so sends over ssh from old versions
of git-annex)
* git-annex setkey
* git-annex transferkey if the user does not use --file
* git-annex multicast sends keys with no associated file info
Doing a single full refresh at the end, after any incremental refresh,
will deal with those edge cases.
This was already prevented in other ways, but as seen in commit
c30fd24d91, those were a bit fragile.
And I'm not sure races were avoided in every case before. At least a
race between two separate git-annex processes, dropping the same
content, seemed possible.
This way, if locking fails, and the content is not present, it will
always do the right thing. Also, it avoids the overhead of an unncessary
inAnnex check for every file.
This commit was sponsored by Denis Dzyubenko on Patreon.
* Improve display of problems auto-initializing or upgrading local git
remotes.
* When a local git remote cannot be initialized because it has no
git-annex branch or a .noannex file, avoid displaying a message about it.
This handles all createProcessSuccess callers, and aside from process
pools, the complete conversion of all process running to async exception
safety should be complete now.
Also, was able to remove from Utility.Process the old API that I now
know was not a good idea. And proof it was bad: The code size went *down*,
despite there being a fair bit of boilerplate for some future API to
reduce.
When storing content on remote fails, always display a reason why.
Since the Storer used by special remotes already did, this mostly affects
git remotes, but not entirely. For example, if git-lfs failed to connect to
the endpoint, it used to silently return False.
* Display a warning message when a remote uses a protocol, such as
git://, that git-annex does not support. Silently skipping such a
remote was confusing behavior.
It sets annex-ignore, so the warning is only displayed once.
* Also display a warning message when a remote, without a known uuid,
is located in a directory that does not currently exist, to avoid
silently skipping such a remote.
This is a bit more debatable, since git-annex get will say,
try making repository available. And since it does not set annex-ignore,
the warning will be displayed repeatedly. It's also an extreme edge case,
I don't think I've ever seen it happen in real life.
get --from, move --from: When used with a local git remote, these used to
silently skip files that the location log thought were present on the
remote, when the remote actually no longer contained them. Since that
behavior could be surprising, now instead display a warning.
I got very confused when I encountered this behavior, since it was silently
skipping a file I needed that whereis said was on the remote.
get without --from already displayed a "unable to access these remotes"
message, which while a bit misleading in that the remote is likely
accessible, but just doesn't contain the file, at least indicated something
went wrong.
Having get --from display a warning makes it in line with get
w/o --from, so seems certianly ok. It might be there are situations where
move --from is used, on eg a whole directory, and the user only wants to
move whatever is present in the remote, and is perfectly ok with files
that are not present being skipped. So I'm less sure about the new warning
being ok there. OTOH, only local git remotes avoiding displaying a warning
in that case too, so this just brings them into line with other remotes.
(Also note that this makes it a little bit faster when dealing with a lot of
files, since it avoids a redundant stat of the file.)
Avoid repeatedly opening keys db when accessing a local git remote and -J
is used.
What was happening was that Remote.Git.onLocal created a new annex state
as each thread started up. The way the MVar was used did not prevent that.
And that, in turn, led to repeated opening of the keys db, as well as
probably other extra work or resource use.
Also managed to get rid of Annex.remoteannexstate, and it turned out there
was an unncessary Maybe in the keysdbhandle, since the handle starts out
closed.
Git has an obnoxious special case in git config, a line "foo" is the same
as "foo = true". That means there is no way to examine the output of
git config and tell if it was run with --null or not, since a "foo"
in the first line could be such a boolean, or could be followed by its
value on the next line if --null were used.
So, rather than trying to do such a detection, track the style of config
at all the points where it's generated.
Fix serious regression in gcrypt and encrypted git-lfs remotes.
Since version 7.20200202.7, git-annex incorrectly stored content
on those remotes without encrypting it.
Problem was, Remote.Git enumerates all git remotes, including git-lfs
and gcrypt. It then dispatches to those. So, Remote.List used the
RemoteConfigParser from Remote.Git, instead of from git-lfs or gcrypt,
and that parser does not know about encryption fields, so did not
include them in the ParsedRemoteConfig. (Also didn't include other
fields specific to those remotes, perhaps chunking etc also didn't
get through.)
To fix, had to move RemoteConfig parsing down into the generate methods
of each remote, rather than doing it in Remote.List.
And a consequence of that was that ParsedRemoteConfig had to change to
include the RemoteConfig that got parsed, so that testremote can
generate a new remote based on an existing remote.
(I would have rather fixed this just inside Remote.Git, but that was not
practical, at least not w/o re-doing work that Remote.List already did.
Big ugly mostly mechanical patch seemed preferable to making git-annex
slower.)
remoteAnnexConfig will avoid bugs like
a3a674d15b
Use now more generic remoteConfig in a couple places that built
non-annex config settings manually before.
using git credential to get the password
One thing this doesn't do is wrap the password prompting inside the prompt
action. So with -J, the output can be a bit garbled.
Rather than leaking the name of the temp file, just say the config parse
failed, and where the config was downloaded from.
Not closing the bug report because two issues were reported in the same
bug report, because the universe wants me to continually re-read old
unclosed bug reports to waste my time determining what still needs to be
done.
Http remotes that do expose a git config file, but are not initialized
resulted in an ugly and unncessary error message, now sqelched.
When git-annex-shell configlist is run w/o the autoinit field, it may
not generate a uuid for the repository. So in that case, it's not
unexpected for the config it does list to not include a UUID, and
dumping out the config in a warning message is not needed.
If configlist is asked to autoinit and we don't get back a config with a
UUID in it, that suggests some problem, and what we got back may not be
a config at all but some diagnostic message, so it does make sense to
output it then.
Needed so Remote.External can query the external program for its
configs. When the external program does not support the query,
the passthrough option will make all input fields be available.
This is a first step toward that goal, using the ProposedAccepted type
in RemoteConfig lets initremote/enableremote reject bad parameters that
were passed in a remote's configuration, while avoiding enableremote
rejecting bad parameters that have already been stored in remote.log
This does not eliminate every place where a remote config is parsed and a
default value is used if the parse false. But, I did fix several
things that expected foo=yes/no and so confusingly accepted foo=true but
treated it like foo=no. There are still some fields that are parsed with
yesNo but not not checked when initializing a remote, and there are other
fields that are parsed in other ways and not checked when initializing a
remote.
This also lays groundwork for rejecting unknown/typoed config keys.
annex.largefiles can be configured by git-annex config, to more easily set
a default that will also be used by clones, without needing to shoehorn the
expression into the gitattributes file. The git config and gitattributes
override that.
Whenever something is added to git-annex config, we have to consider what
happens if a user puts a purposfully bad value in there. Or, if a new
git-annex adds some new value that an old git-annex can't parse.
In this case, a global annex.largefiles that can't be parsed currently
makes an error be thrown. That might not be ideal, but the gitattribute
behaves the same, and is almost equally repo-global.
Performance notes:
git-annex add and addurl construct a matcher once
and uses it for every file, so the added time penalty for reading the global
config log is minor. If the gitattributes annex.largefiles were deprecated,
git-annex add would get around 2% faster (excluding hashing), because
looking that up for each file is not fast. So this new way of setting
it is progress toward speeding up add.
git-annex smudge does need to load the log every time. As well as checking
the git attribute. Not ideal. Setting annex.gitaddtoannex=false avoids
both overheads.
git-annex find is now RawFilePath end to end, no string conversions.
So is git-annex get when it does not need to get anything.
So this is a major milestone on optimisation.
Benchmarks indicate around 30% speedup in both commands.
Probably many other performance improvements. All or nearly all places
where a file is statted use RawFilePath now.
Adds a dependency on filepath-bytestring, an as yet unreleased fork of
filepath that operates on RawFilePath.
Git.Repo also changed to use RawFilePath for the path to the repo.
This does eliminate some RawFilePath -> FilePath -> RawFilePath
conversions. And filepath-bytestring's </> is probably faster.
But I don't expect a major performance improvement from this.
This is mostly groundwork for making Annex.Location use RawFilePath,
which will allow for a conversion-free pipleline.
The parser and looking up config keys in the map should both be faster
due to using ByteString.
I had hoped this would speed up startup time, but any improvement to
that was too small to measure. Seems worth keeping though.
Note that the parser breaks up the ByteString, but a config map ends up
pointing to the config as read, which is retained in memory until every
value from it is no longer used. This can change memory usage
patterns marginally, but won't affect git-annex.
Finally builds (oh the agoncy of making it build), but still very
unmergable, only Command.Find is included and lots of stuff is badly
hacked to make it compile.
Benchmarking vs master, this git-annex find is significantly faster!
Specifically:
num files old new speedup
48500 4.77 3.73 28%
12500 1.36 1.02 66%
20 0.075 0.074 0% (so startup time is unchanged)
That's without really finishing the optimization. Things still to do:
* Eliminate all the fromRawFilePath, toRawFilePath, encodeBS,
decodeBS conversions.
* Use versions of IO actions like getFileStatus that take a RawFilePath.
* Eliminate some Data.ByteString.Lazy.toStrict, which is a slow copy.
* Use ByteString for parsing git config to speed up startup.
It's likely several of those will speed up git-annex find further.
And other commands will certianly benefit even more.
This will speed up the common case where a Key is deserialized from
disk, but is then serialized to build eg, the path to the annex object.
Previously attempted in 4536c93bb2
and reverted in 96aba8eff7.
The problems mentioned in the latter commit are addressed now:
Read/Show of KeyData is backwards-compatible with Read/Show of Key from before
this change, so Types.Distribution will keep working.
The Eq instance is fixed.
Also, Key has smart constructors, avoiding needing to remember to update
the cached serialization.
Used git-annex benchmark:
find is 7% faster
whereis is 3% faster
get when all files are already present is 5% faster
Generally, the benchmarks are running 0.1 seconds faster per 2000 files,
on a ram disk in my laptop.
* git-lfs: The url provided to initremote/enableremote will now be
stored in the git-annex branch, allowing enableremote to be used without
an url. initremote --sameas can be used to add additional urls.
* git-lfs: When there's a git remote with an url that's known to be
used for git-lfs, automatically enable the special remote.
