addurl: When security configuration prevents downloads with youtube-dl,
still check if the url is one that it supports, and fail downloading it,
instead of downloading the raw web page.
No point in keeping an empty tmp workdir around.
The associated tmp object file is retained even if empty, didn't want to
deal with any possible races with something else downloading to that
file at the same time this would check if it's empty. Anyhow, temp
object files are normally retained, and this will get cleaned out the
same way those do, by dropunused.
Leveraged the existing verification code by making it also check the
retrievalSecurityPolicy.
Also, prevented getViaTmp from running the download action at all when the
retrievalSecurityPolicy is going to prevent verifying and so storing it.
Added annex.security.allow-unverified-downloads. A per-remote version
would be nice to have too, but would need more plumbing, so KISS.
(Bill the Cat reference not too over the top I hope. The point is to
make this something the user reads the documentation for before using.)
A few calls to verifyKeyContent and getViaTmp, that don't
involve downloads from remotes, have RetrievalAllKeysSecure hard-coded.
It was also hard-coded for P2P.Annex and Command.RecvKey,
to match the values of the corresponding remotes.
A few things use retrieveKeyFile/retrieveKeyFileCheap without going
through getViaTmp.
* Command.Fsck when downloading content from a remote to verify it.
That content does not get into the annex, so this is ok.
* Command.AddUrl when using a remote to download an url; this is new
content being added, so this is ok.
This commit was sponsored by Fernando Jimenez on Patreon.
A local http proxy would bypass the security configuration. So,
the security configuration has to be applied when choosing whether to
use the proxy.
While http rebinding attacks against the dns lookup of the proxy IP
address seem very unlikely, this implementation does prevent them, since
it resolves the IP address once, checks it, and then reconfigures
http-client's proxy using the resolved address.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Security fix!
* git-annex will refuse to download content from http servers on
localhost, or any private IP addresses, to prevent accidental
exposure of internal data. This can be overridden with the
annex.security.allowed-http-addresses setting.
* Since curl's interface does not have a way to prevent it from accessing
localhost or private IP addresses, curl defaults to not being used
for url downloads, even if annex.web-options enabled it before.
Only when annex.security.allowed-http-addresses=all will curl be used.
Since S3 and WebDav use the Manager, the same policies apply to them too.
youtube-dl is not handled yet, and a http proxy configuration can bypass
these checks too. Those cases are still TBD.
This commit was sponsored by Jeff Goeke-Smith on Patreon.
Security fix! Allowing any schemes, particularly file: and
possibly others like scp: allowed file exfiltration by anyone who had
write access to the git repository, since they could add an annexed file
using such an url, or using an url that redirected to such an url,
and wait for the victim to get it into their repository and send them a copy.
* Added annex.security.allowed-url-schemes setting, which defaults
to only allowing http and https URLs. Note especially that file:/
is no longer enabled by default.
* Removed annex.web-download-command, since its interface does not allow
supporting annex.security.allowed-url-schemes across redirects.
If you used this setting, you may want to instead use annex.web-options
to pass options to curl.
With annex.web-download-command removed, nearly all url accesses in
git-annex are made via Utility.Url via http-client or curl. http-client
only supports http and https, so no problem there.
(Disabling one and not the other is not implemented.)
Used curl --proto to limit the allowed url schemes.
Note that this will cause git annex fsck --from web to mark files using
a disallowed url scheme as not being present in the web. That seems
acceptable; fsck --from web also does that when a web server is not available.
youtube-dl already disabled file: itself (probably for similar
reasons). The scheme check was also added to youtube-dl urls for
completeness, although that check won't catch any redirects it might
follow. But youtube-dl goes off and does its own thing with other
protocols anyway, so that's fine.
Special remotes that support other domain-specific url schemes are not
affected by this change. In the bittorrent remote, aria2c can still
download magnet: links. The download of the .torrent file is
otherwise now limited by annex.security.allowed-url-schemes.
This does not address any external special remotes that might download
an url themselves. Current thinking is all external special remotes will
need to be audited for this problem, although many of them will use
http libraries that only support http and not curl's menagarie.
The related problem of accessing private localhost and LAN urls is not
addressed by this commit.
This commit was sponsored by Brett Eisenberg on Patreon.
Since 3dd43df9c2, the socket warmup does
not run git-annex-shell on the remote host, and the point of this check
was to avoid error messages running git-annex-shell when it was not
installed. So the check is not needed any longer.
Also, this is one of only two uses of remoteGitConfig, which
I want to get rid of for reasons explained in
fc5888300f.
This commit was sponsored by Fernando Jimenez on Patreon.
This fixes a crash when a git submodule has a name starting with a dot.
Such a submodule might contain dotfiles that are intended to be used when
inside the view (since a dot-directory that's not a submodule was already
preserved when entering a view). So, rather than eliminating the submodule
from the view, its git ls-files --stage hash is copied over into the view.
dotfiles/dirs have their git ls-files --stage hashes similarly copied over
to the view. This is more efficient and simpler than the old method,
and also won't break if git ever adds a new type of tree item, like was
done with submodules.
Since the content of dotfiles in the working tree is no longer hashed
when entering a view, when there are unstaged modifications, they are
not included in the view branch. Entering the view branch still works,
but git checkout shows "M .dotfile", and git diff will show the unstaged
changes. This seems like an improvement over the old behavior.
Also made Command.View not delete empty directories that are submodules
when entering a view, while still deleting other empty directories.
This commit was supported by the NSF-funded DataLad project.
This was badly named, it's a not a blob necessarily, but anything that a
tree can refer to.
Also removed the Show instance which was used for serialization to git
format, instead use fmtTreeItemType.
This commit was supported by the NSF-funded DataLad project.
* Display error message when http download fails.
There's nothing in the http-client library to nicely format a http
exception, so in some cases it has to fall back to using show on it.
Seems better than just saying "it failed" or only showing the http
status code.
* Avoid forward retry when 0 bytes were received.
forwardRetry was comparing Nothing to Just 0, and so thought there had
been progress made when 0 bytes were received.
This commit was supported by the NSF-funded DataLad project.
Fix regression in last release that crashes when using --all or running
git-annex in a bare repository. May have also affected git-annex unused and
git-annex info.
Reversed the order of the (++) in Annex.Branch.files so --all will stream
lazily still when there are not a bunch of uncommitted journal files.
Added a todo to maybe improve this later.
This commit was sponsored by Trenton Cronholm on Patreon.
In Annex.Branch.branch, the (++) was killing laziness.
Rewrote so it streams lazily.
filterM also kills laziness, so made loggedKeys use a Unchecked type,
and check if the key is dead in the seek loop.
Note that loggedKeysFor still buffers, so git-annex info <remote> and
git-annex unused --from remote still use more memory than necessary.
Also removed some unused functions from Annex.Journal.
Flipped all comparisons. When a TrustLevel list was wanted from Trusted
downwards, used Down to compare it in that order.
This commit was sponsored by mo on Patreon.
This commit removes the Ord and Enum instances, commenting out all code
that depends on them, to make sure that all code effected by the
inversion fix has been identified.
(Assuming no ifdefs involve TrustLevel.)
The next commit will fix up all the identified code.
move: Added --safe option, which makes move honor numcopies settings.
Also --unsafe enables the default behavior, anticipating that the
default may one day change.
This commit was sponsored by Ethan Aubin.
* For url downloads, git-annex now defaults to using a http library,
rather than wget or curl. But, if annex.web-options is set, it will
use curl. To use the .netrc file, run:
git config annex.web-options --netrc
* git-annex no longer uses wget (and wget is no longer shipped with
git-annex builds).
Note that curl is always run in silent mode, since the new API for
download has a MeterUpdate and doesn't make way for curl progress
output. It might be worth writing a parser for curl's progress output
to update the meter when using it, but I didn't bother with this edge
case for now.
This commit was supported by the NSF-funded DataLad project.
Enable HTTP connection reuse across multiple files, when git-annex
uses http-conduit. Before, a new Manager was created each time
Utility.Url used it. Now, a single Manager gets created the first time,
so connections are reused.
Doesn't help when external programs are used for url download,
but does speed up addurl --fast, fsck --from web, etc.
Testing fsck --fast --from web with 3 files, over high-latency
satellite internet, it sped up from 19.37s to 14.96s.
This commit was supported by the NSF-funded DataLad project.
When adding a new version of a file, and annex.genmetadata is enabled,
don't copy the data metadata from the old version of the file, instead use
the mtime of the file. Rationalle being that the user has requested to
generate metadata and so would expect to get the new mtime into metadata.
Also, avoid warning about copying metadata when all the old metadata is
date metadata. Which was rather the harder part.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
I think this used to be the case, but it was accidentially lost way back in
commit 3887432c54. Normally, transfers do not
throw exceptions, so probably forward retrying was rarely done due to that
oversight.
This also affects the new annex.retry etc configuration. If a transfer
fails, without making any progress, eg because the file is not present on
the remote or the remote is not accessible, it will now retry when
configuration calls for it. In some cases such a retry is not desirable,
for example the remote could be accessible and not have a copy of the file
that the local repo thinks it has. I see no way to distinguish such cases
from cases where a retry should really be done. So, it'll be up to the user
to configure it to work for them.
Added annex.retry, annex.retry-delay, and per-remote versions to configure
transfer retries.
This commit was supported by the NSF-funded DataLad project.
Fix race condition in ssh warmup that caused git-annex to get stuck and
never process some while when run with high levels of concurrency.
So far, I've isolated the problem to processTranscript, which hangs
reading output from ssh in this situation. I don't yet understand why
processTranscript behaves that way.
Since here we don't care about the ssh output, and only want to /dev/null
it, changed to not use processTranscript, avoiding its problem.
This commit was supported by the NSF-funded DataLad project.
Avoid creating transfer info file before transfer lock is created and
locked.
The wrong order for one thing caused transfer info to be overwritten
when a transfer was already in progress.
But worse, it caused checkTransfer to see the transfer info,
and so lock the transfer lock in order to verify the transfer was not in
progress. Which in a concurrent situation, prevented the transferrer
from locking the transfer lock, so it failed with "transfer already in
progress".
Note that the transferinfo command does not lock the transfer lock
before creating the transfer info. But, that's only run after
recvkey is running, and recvkey does lock the transfer lock, so that
seems more or less ok. (Other than being a super complicated legacy mess
that the P2P code has mostly obsoleted now.)
This commit was supported by the NSF-funded DataLad project.
When resuming a download and not using a rolling checksummer like rsync,
the partial file we start with might contain garbage, in the case where a
file changed as it was being downloaded. So, disabling verification on
resumes risked a bad object being put into the annex.
Even downloads with rsync are currently affected. It didn't seem worth the
added complexity to special case those to prevent verification, especially
since git-annex is using rsync less often now.
This commit was sponsored by Brock Spratlen on Patreon.
P2P protocol version 1 adds VALID|INVALID after DATA; INVALID means the
file was detected to change content while it was being sent and so we
may not have received the valid content of the file.
Added new MustVerify constructor for Verification, which forces
verification even when annex.verify=false etc. This is used when INVALID
and in protocol version 0.
As well as changing git-annex-shell p2psdio, this makes git-annex tor
remotes always force verification, since they don't yet use protocol
version 1. Previously, annex.verify=false could skip verification when
using tor remotes, and let bad data into the repository.
This commit was sponsored by Jack Hill on Patreon.
lockContentShared had a screwy caveat that it didn't verify that the content
was present when locking it, but in the most common case, eg indirect mode,
it failed to lock when the content is not present.
That led to a few callers forgetting to check inAnnex when using it,
but the potential data loss was unlikely to be noticed because it only
affected direct mode I think.
Fix data loss bug when the local repository uses direct mode, and a
locally modified file is dropped from a remote repsitory. The bug
caused the modified file to be counted as a copy of the original file.
(This is not a severe bug because in such a situation, dropping
from the remote and then modifying the file is allowed and has the same
end result.)
And, in content locking over tor, when the remote repository is
in direct mode, it neglected to check that the content was actually
present when locking it. This could cause git annex drop to remove
the only copy of a file when it thought the tor remote had a copy.
So, make lockContentShared do its own inAnnex check. This could perhaps
be optimised for direct mode, to avoid the check then, since locking
the content necessarily verifies it exists there, but I have not bothered
with that.
This commit was sponsored by Jeff Goeke-Smith on Patreon.
Added annex.merge-annex-branches config setting which can be used to
disable automatic merge of git-annex branches.
I wonder if git-annex merge/sync/assistant should disable this
setting? Not sure yet, so have not done so. May be that users will not set
it in git config, but pass it via -c to commands that need it.
Checking the config setting adds a very small overhead, but it's
only checked once per command so should be insignificant.
This commit was supported by the NSF-funded DataLad project.
Repositories that are upgraded from before that version to this
one will not break, but will just not see the benefit of the mergedrefs log
speeding things up, until one new ref gets merged in.
And for tab completion, by not unnessessarily statting paths to remotes,
which used to cause eg, spin-up of removable drives.
Got rid of the remotes member of Git.Repo. This was a bit painful.
Remote.Git modifies the list of remotes as it reads their configs,
so still need a persistent list of remotes. So, put it in as
Annex.gitremotes. It's only populated by getGitRemotes, so commands
like examinekey that don't care about remotes won't do so.
This commit was sponsored by Jake Vosloo on Patreon.
Fix more places where files in .git/annex/ were written with modes that
did not take the core.sharedRepository config into account.
This commit was sponsored by Jeff Goeke-Smith on Patreon.
git grep writeFile finds some more that might also be problems, but
for now I've concentrated on .git/annex/ log files. There are certianly
cases where writeFile is not a problem too.
This commit was sponsored by mo on Patreon.
Fourth or fifth try at this and finally found a way to make it work.
Absurd amount of busy-work forced on me by change in cabal's behavior.
Split up Utility modules that need posix stuff out of ones used by
Setup. Various other hacks around inability for Setup to use anything
that ifdefs a use of unix.
Probably lost a full day of my life to this.
This is how build systems make their users hate them. Just saying.
And also now in non-fast mode, since it was just changed to query for the
filename separately.
And avoid processTranscript which mixed up stdout and stderr and could have
led to weirdness if there were warnings that didn't get suppressed.
addurl: When the file youtube-dl will download is already an annexed file,
don't download it again and fail to overwrite it, instead just do nothing,
like it used to when quvi was used.
This commit was sponsored by Anthony DeRobertis on Patreon.
This reverts commit 51228c2306.
No, still doesn't work when built with cabal. It did with stack; stack
must somehow make the unix package implicitly available.
With cabal, System.Posix.Process and System.Posix.Env are both missing.
Seems I had all the work in past commits to make this build, at least on
linux. I'm actually surprised it does, without a unix dep, Utility.Env
still builds ok somehow despite using System.Posix.Env.
This commit was sponsored by Fernando Jimenez on Patreon.
This avoids warnings from stack about the module not being listed in the
cabal file. So, the generated file is also renamed to Build/SysConfig.
Note that the setup program seems to be cached despite these changes; I
had to cabal clean to get cabal to update it so that Build/SysConfig was
written.
This commit was sponsored by Jochen Bartl on Patreon.
A top-level .noannex file will prevent git-annex init from being used in a
repository. This is useful for repositories that have a policy reason not
to use git-annex. The content of the file will be displayed to the user who
tries to run git-annex init.
This also affects git annex reinit and initialization via the webapp.
It does not affect automatic inits, when there's a sibling git-annex branch
already.
This commit was supported by the NSF-funded DataLad project.
Similar to c6e4bc0a22 but another code
path. As well as using youtube-dl unecessarily, it used the filename it
comes up with, which while nice for youtube videos, is not right for
other files.
This means more work is done for urls that youtube-dl does support,
but is probably more efficient for other urls, since it only downloads
the first chunk of content, while youtube-dl probably downloads more.
This commit was supported by the NSF-funded DataLad project.
