This reverts commit 66b2536ea0.
I misunderstood commit ac56a5c2a0
and caused a FD leak when pid locking is not used.
A LockHandle contains an action that will close the underlying lock
file, and that action is run when it is closed. In the case of a shared
lock, the lock file is opened once for each LockHandle, and only
the one for the LockHandle that is being closed will be closed.
Seem there are several races that happen when 2 threads run PidLock.tryLock
at the same time. One involves checkSaneLock of the side lock file, which may
be deleted by another process that is dropping the lock, causing checkSaneLock
to fail. And even with the deletion disabled, it can still fail, Probably due
to linkToLock failing when a second thread overwrites the lock file.
The same can happen when 2 processes do, but then one process just fails
to take the lock, which is fine. But with 2 threads, some actions where failing
even though the process as a whole had the pid lock held.
Utility.LockPool.PidLock already maintains a STM lock, and since it uses
LockShared, 2 threads can hold the pidlock at the same time, and when
the first thread drops the lock, it will remain held by the second
thread, and so the pid lock file should not get deleted until the last
thread to hold it drops the lock. Which is the right behavior, and why a
LockShared STM lock is used in the first place.
The problem is that each time it takes the STM lock, it then also calls
PidLock.tryLock. So that was getting called repeatedly and concurrently.
Fixed by noticing when the shared lock is already held, and stop calling
PidLock.tryLock again, just use the pid lock that already exists then.
Also, LockFile.PidLock.tryLock was deleting the pid lock when it failed
to take the lock, which was entirely wrong. It should only drop the side
lock.
Sponsored-by: Dartmouth College's Datalad project
It ought to exist, since linkToLock has just created it. However,
Lustre seems to have a rather probabilisitic view of the contents of a
directory, so catching the error if it somehow does not exist and
running the same code path that would be ran if linkToLock failed
might avoid this fun Lustre failure.
Sponsored-by: Dartmouth College's Datalad project
Commit b6e4ed9aa7 made non-annexed files
be re-uploaded every time, since they're not tracked in the location log,
and it made it check the location log. Don't do that for non-annexed files.
Sponsored-by: Brock Spratlen on Patreon
This version of git -- or its new default "ort" resolver -- handles such
a conflict by staging two files, one with the original name and the other
named file~ref. Use unmergedSiblingFile when the latter is detected.
(It doesn't do that when the conflict is between a directory and a file
or symlink though, so see previous commit for how that case is handled.)
The sibling file has to be deleted separately, because cleanConflictCruft
may not delete it -- that only handles files that are annex links,
but the sibling file may be the non-annexed file side of the conflict.
The graftin code had assumed that, when the other side of a conclict
is a symlink, the file in the work tree will contain the non-annexed
content that we want it to contain. But that is not the case with the new
git; the file may be the annex link and needs to be replaced with the
content, while the annex link will be written as a -variant file.
(The weird doesDirectoryExist check in graftin turns out to still be
needed, test suite failed when I tried to remove it.)
Test suite passes with new git with ort resolver default. Have not tried it
with old git or other defaults.
Sponsored-by: Noam Kremen on Patreon
The new "ort" resolver uses different filenames than what the test suite
accepted when resolving a conflict between a directory an an annexed
file. Make the test looser in what it accepts, so it will work with old
and new git.
Other tests still look for "conflictor.variant" as a prefix,
because when eg resolving a conflicted merge of 2 annexed files,
the filename is not changed by the ort resolver, and I didn't want to
unncessarily loosen the test.
Also I'm not entirely happy with the filenames used by the ort resolver,
see comment.
There's still another test failure caused by that resolver that is not
fixed yet.
Bugfix: When -J was enabled, getting files leaked a ever-growing number of
git cat-file processes.
(Since commit dd39e9e255)
The leak happened when mergeState called stopNonConcurrentSafeCoProcesses.
While stopNonConcurrentSafeCoProcesses usually manages to stop everything,
there was a race condition where cat-file processes were leaked. Because
catFileStop modifies Annex.catfilehandles in a non-concurrency safe way,
and could clobber modifications made in between. Which should have been ok,
since originally catFileStop was only used at shutdown.
Note the comment on catFileStop saying it should only be used when nothing
else is using the handles. It would be possible to make catFileStop
race-safe, but it should just not be used in a situation where a race is
possible. So I didn't bother.
Instead, the fix is just not to stop any processes in mergeState. Because
in order for mergeState to be called, dupState must have been run, and it
enables concurrency mode, stops any non-concurrent processes, and so all
processes that are running are concurrency safea. So there is no need to
stop them when merging state. Indeed, stopping them would be extra work,
even if there was not this bug.
Sponsored-by: Dartmouth College's Datalad project
When non-concurrent git coprocesses have been started, setConcurrency
used to not stop them, and so could leak processes when enabling
concurrency, eg when forkState is called.
I do not think that ever actually happened, given where setConcurrency
is called. And it probably would only leak one of each process, since it
never downgrades from concurrent to non-concurrent.
See comment for analysis.
At first I thought I'd need to convert all T.unpack in git-annex, but
luckily not -- so long as the Text is read from a file, the filesystem
encoding is applied and T.unpack is fine. It's only when using Feed
that the filesystem encoding is not applied.
While this fixes the crash, it does result in some mojibake, eg:
itemid=http://www.manager-tools.com/2014/01/choosing-a-company-work-chapter-7-���-questions/
Have not tracked that down, but it must be unrelated, because
I've verified that it roundtrips when using encodeUf8:
joey@darkstar:~/src/git-annex>LANG=C ghci Utility/FileSystemEncoding.hs
ghci> useFileSystemEncoding
ghci> Just f <- Text.Feed.Import.parseFeedFromFile "/home/joey/tmp/career_tools_podcasts.xml"
ghci> Just (_, x) = Text.Feed.Query.getItemId (Text.Feed.Query.feedItems f !! 0)
ghci> decodeBS (Data.Text.Encoding.encodeUtf8 x)
"http://www.manager-tools.com/2014/01/choosing-a-company-work-chapter-7-\56546\56448\56467-questions/"
ghci> writeFile "foo" $ decodeBS (Data.Text.Encoding.encodeUtf8 x)
Writes a file containing the ENDASH character.
Sponsored-by: Jochen Bartl on Patreon
I saw a user open a forum post that looked like they had read this man
page, but were unaware of git-annex unlock, and were looking for its
functionality. They later deleted the post, probably when they found
git-annex unlock. Looking at this man page, it was a bit unclear about
the motivation for the command.
Yes, I'm warching... ;-)
While intended for converting URL keys added by addurl --fast to be
as if added by addurl --relaxed, it can also be used to remove size
from other types of keys. Although that is not likely to be useful
for checksummed keys, I suppose it could be used for WORM or other
non-checksum keys.
Specifying the --remove-size option does not prevent other migrations
from taking effect if there's a key upgrade to perform, or if the
backend has changed. So --backend=URL needs to be used to prevent
migrating an URL key to the default backend.
Note that it's not possible to use git-annex migrate to convert from a
non-URL key to an URL key, as URL keys cannot be generated, except by
addurl. So while this can get the same effect as --relaxed would have
when addurl --fast was used, when --fast was not used, it won't work, or
if --backend=URL is not used will remove the size but not prevent
checksum verification, which is not useful. Due to this complexity, I
decided not to mention it in the git-annex addurl man page.
Sponsored-by: Jochen Bartl on Patreon
git-lfs: Fix interoperability with gitlab's implementation of the git-lfs
protocol, which requests Content-Encoding chunked.
Sponsored-by: Dartmouth College's Datalad project
* uninit: Avoid error message when no commits have been made to the
repository yet.
* uninit: Avoid error message when there is no git-annex branch.
Sponsored-by: Svenne Krap on Patreon
Based on my earlier benchmark, I have a rough cost model for how
expensive it is for git-annex smudge to be run on a file, vs
how expensive it is for a gigabyte of a file's content to be read and
piped through to filter-process.
So, using that cost model, it can decide if using filter-process will
be more or less expensive than running the smudge filter on the files to
be restaged.
It turned out to be *really* annoying to temporarily disable
filter-process. I did find a way, but urk, this is horrible. Notice
that, if it's interrupted with it disabled, it will remain disabled
until the next time restagePointerFile runs. Which could be some time
later. If the user runs `git add` or `git checkout` on a lot of small
files before that, they will see slower than expected performance.
(This commit also deletes where I wrote down the benchmark results
earlier.)
Sponsored-by: Noam Kremen on Patreon
filter-process: New command that can make git add/checkout faster when
there are a lot of unlocked annexed files or non-annexed files, but that
also makes git add of large annexed files slower.
Use it by running: git
config filter.annex.process 'git-annex filter-process'
Fully tested and working, but I have not benchmarked it at all.
And, incremental hashing is not done when git add uses it, so extra work is
done in that case.
Sponsored-by: Mark Reidenbach on Patreon
metadata --batch --json: Reject input whose "fields" does not consist of
arrays of strings. Such invalid input used to be silently ignored.
Used to be that parseJSON for a JSONActionItem ran parseJSON separately
for the itemAdded, and if that failed, did not propagate the error. That
allowed different items with differently named fields to be parsed.
But it was actually only used to parse "fields" for metadata, so that
flexability is not needed.
The fix is just to parse "fields" as-is. AddJSONActionItemFields is needed
only because of the wonky way Command.MetaData adds onto the started json
object.
Note that this line got a dummy type signature added,
just because the type checker needs it to be some type.
itemFields = Nothing :: Maybe Bool
Since it's Nothing, it doesn't really matter what type it is,
and the value gets turned into json and is then thrown away.
Sponsored-by: Kevin Mueller on Patreon
Turns out that CommandStart actions do not have their exceptions caught,
which is why the giveup was causing a crash. Mostly these actions
do not do very much work on their own, but it does seem possible there
are other commands whose CommandStart also throws an exception.
So, my first attempt at a fix was to catch those exceptions. But,
--json-error-messages then causes a difficulty, because in order to output
a json error message, an action needs to have been started; that sets up
the json object that the error message will be included in a field of.
While it would be possible to output an object with just an error field,
this would be json output of a format that the user has no reason to
expect, that happens only in an exceptional circumstance. That is something
I have always wanted to avoid with the json output; while git-annex man
pages don't document what the json looks like, the output has always
been made to be self-describing. Eg, it includes "error-messages":[]
even when there's no errors.
With that ruled out, it doesn't seem a good idea to catch CommandStart
exceptions and display the error to stderr when --json-error-messages
is set. And so I don't know if it makes sense to catch exceptions from that
at all. Maybe I'd have a different opinion if --json-error-messages did not
exist though.
So instead, output a blank line like other batch commands do.
This also leaves open the possibility of implementing support for matching
object with metadata --json, which would also want to output a blank line
when the input didn't match.
Sponsored-by: Dartmouth College's DANDI project
addurl: Support adding the same url to multiple files at the same time when
using -J with --batch --with-files.
Implementation was easier than expected, was able to reuse OnlyActionOn.
While it will download the url's content multiple times, that seems like
the best thing to do; see my comment for why.
Sponsored-by: Dartmouth College's DANDI project
This makes it be displayed in the error-messages field with
--json-error-messages. And with --quiet, it will let it be displayed,
which makes sense because it's telling the user why what they requested
to do has failed to happen.
This opens the potential for the object file to be in place but
git-annex is interrupted before it can freeze it. git-annex fsck already
fixes that situation, which can also occur when lockContentForRemoval
thaws content.
Also improve comment to not be Windows-specific.
Caused by dirContains ".." "foo" being incorrectly False.
Also added a test of dirContains, which includes all the previous bug fixes
I could find and some obvious cases.
Reversion in version 8.20211011
Sponsored-by: Brett Eisenberg on Patreon
Fix bug that caused stale git-annex branch information to read when
annex.private or remote.name.annex-private is set.
The private journal file should not prevent reading more current
information from the git-annex branch, but used to.
Note that, overBranchFileContents has to do additional work now, when
there's a private journal file, it reads from the branch redundantly
and more slowly.
Sponsored-by: Jack Hill on Patreon
This removes a messy caveat that was easy to forget and caused at least one
bug. The price paid is that, after a write to a MultiWriter db, it has to
close the db connection that it had been using to read, and open a new
connection. So it might be a little bit slower. But, writes are usually
batched together, so there's often only a single write, and so there should
not be much of a slowdown. Notice that SingleWriter already closed the db
connection after a write, so paid the same overhead.
This is the second try at fixing a bug: git-annex get when run as the first
git-annex command in a new repo did not populate all unlocked files.
(Reversion in version 8.20210621)
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
Rather than the error that occurred when trying to download the unchunked
content, which is less likely to actually be stored in the remote.
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
test: Put gpg temp home directory in system temp directory, not filesystem
being tested.
Since I've found indications gpg can fail talking to the agent when the
socket ends up on eg, fat. And to hopefully fix this bug report I've
followed up on.
The main risk in using the system temp dir is that TMPDIR could be set to a
long directory path, which is too long to put a unix socket in. To
partially amelorate that risk, it uses either an absolute or a relative
path, whichever is shorter. (Hopefully gpg will not convert it to a longer
form of the path..)
If the user sets TMPDIR to something so long a path to it +
"S.gpg-agent" is too long, I suppose that's their issue to deal with.
Sponsored-by: Dartmouth College's Datalad project
This negotiation is not supported by versions of git-annex older
than 6.20180312. Well, maybe really 6.20180227 or so, but using that in
the changelog simplifies things since it was the version for the other
changes as well.
See commit c81768d425 for the back story.
As well as allowing for future protocol improvements, this will result
in negoatiating protocol version 1, which is an improvement over default
version 0.
In fact, it looks like no supported version of git-annex will use
protocol version 0, since version 1 was introduced in 6.20180227.
Still, removing the code for version 0 seems unncessary.
See commit 31e1adc005.
Sponsored-by: Brett Eisenberg on Patreon.
* Removed support for accessing git remotes that use versions of
git-annex older than 6.20180312.
* git-annex-shell: Removed several commands that were only needed to
support git-annex versions older than 6.20180312.
(lockcontent, recvkey, sendkey, transferinfo, commit)
The P2P protocol was added in that version, and used ever since, so
this code was only needed for interop with older versions.
"git-annex-shell commit" is used by newer git-annex versions, though
unnecessarily so, because the p2pstdio command makes a single commit at
shutdown. Luckily, it was run with stderr and stdout sent to /dev/null,
and non-zero exit status or other exceptions are caught and ignored. So,
that was able to be removed from git-annex-shell too.
git-annex-shell inannex, recvkey, sendkey, and dropkey are still used by
gcrypt special remotes accessed over ssh, so those had to be kept.
It would probably be possible to convert that to using the P2P protocol,
but it would be another multi-year transition.
Some git-annex-shell fields were able to be removed. I hoped to remove
all of them, and the very concept of them, but unfortunately autoinit
is used by git-annex sync, and gcrypt uses remoteuuid.
The main win here is really in Remote.Git, removing piles of hairy fallback
code.
Sponsored-by: Luke Shumaker
This improves the borg special remote memory usage, by
letting it only load one archive's worth of filenames into memory at a
time, and building up a larger tree out of the chunks.
When a borg repository has many archives, git-annex could easily OOM
before. Now, it will use only memory proportional to the number of
annexed keys in an archive.
Minor implementation wart: Each new chunk re-opens the content
identifier database, and also a new vector clock is used for each chunk.
This is a minor innefficiency only; the use of continuations makes
it hard to avoid, although putting the database handle into a Reader
monad would be one way to fix it.
It may later be possible to extend the ImportableContentsChunkable
interface to remotes that are not third-party populated. However, that
would perhaps need an interface that does not use continuations.
The ImportableContentsChunkable interface currently does not allow
populating the top of the tree with anything other than subtrees. It
would be easy to extend it to allow putting files in that tree, but borg
doesn't need that so I left it out for now.
Sponsored-by: Noam Kremen on Patreon
This adds the overhead of a copy when serializing and deserializing keys.
I have not benchmarked much, but runtimes seem barely changed at all by that.
When a lot of keys are in memory, it improves memory use.
And, it prevents keys sometimes getting PINNED in memory and failing to GC,
which is a problem ByteString has sometimes. In particular, git-annex sync
from a borg special remote had that problem and this improved its memory
use by a large amount.
Sponsored-by: Shae Erisson on Patreon
This adds the overhead of a copy whenever converting to/from ExportLocation and
ImportLocation.
borg: Some improvements to memory use when importing a lot of archives.
(It's still pretty bad.)
Sponsored-by: Mark Reidenbach on Patreon
Commit 4bf7940d6b introduced this
problem, but was otherwise doing a good thing. Problem being
that fileRef "/foo" used to return ":./foo", which was actually wrong,
but as long as there was no foo in the local repository, catKey
could operate on it without crashing. After that fix though, fileRef
would return eg "../../foo", resulting in fileRef returning
":./../../foo", which will make git cat-file crash since that's
not a valid path in the repo.
Fix is simply to make fileRef detect paths outside the repo and return
Nothing. Then catKey can be skipped. This needed several bugfixes to
dirContains as well, in previous commits.
In Command.Smudge, this led to needing to check for Nothing. That case
should actually never happen, because the fileoutsiderepo check will
detect it earlier.
Sponsored-by: Brock Spratlen on Patreon
sync --content: Avoid a redundant checksum of a file that was
incrementally verified, when used on NTFS and perhaps other filesystems.
When sync has just gotten the content, it does not need to check inAnnex a
second time. On NTFS, for some reason the write of the inode cache after
it gets the content is not immediately able to be read, and with an
empty/non-matching inode cache due to that stale data, inAnnex falls back
to hashing the whole object to determine if it's present.
Sponsored-by: Brock Spratlen on Patreon
Disabling git-annex branch update for this command is
ok, because it does not use any information from the branch,
but only logs the location when it adds a key.
Sponsored-by: Dartmouth College's Datalad project
I first saw this getting with -J2 over ssh, but later saw it also
without the -J2. It was resuming, and the calulated unboundDelay was
many minutes. The first update of the meter jumped to some large value,
because of the resuming, and so it thought the BW was super fast.
Avoid by waiting until the second meter update.
Might be a good idea to also guard for the delay being many seconds
and avoid waiting. But how many? If BW is legitimately super fast, and a
remote happens to read more than a 32kb or so chunk at a time, it could
in theory download megabytes or gigabytes of data before the first meter
update. It would actually be appropriate then to delay for a long time,
if the desired BW was low. Could make up some numbers that are sane now,
but tech may improve.
(BTW, pleased to see bwlimit does work with -J. I had worried that
it might not, if the meter update happened in a different thread than
the downloading, but it's done in the same thread.)
Sponsored-by: Brett Eisenberg on Patreon
New method is much better. Avoids unrestrained transfer at the beginning
(except for the first block. Keeps right at or a few kb/s below the
configured limit, with very little varation in the actual reported bandwidth.
Removed the /s part of the config as it's not needed.
Ready to merge.
Sponsored-by: Luke Shumaker on Patreon
Probably this fixes a reversion, but I don't know what version broke it.
This does use withOtherTmp for a temp file that could be quite large.
Though albeit a reflink copy that will not actually take up any space
as long as the file it was copied from still exists. So if the copy cow
succeeds but git-annex is interrupted just before that temp file gets
renamed into the usual .git/annex/tmp/ location, there is a risk that
the other temp directory ends up cluttered with a larger temp file than
later. It will eventually be cleaned up, and the changes of this being
a problem are small, so this seems like an acceptable thing to do.
Sponsored-by: Shae Erisson on Patreon
Added annex.bwlimit and remote.name.annex-bwlimit config that works for git
remotes and many but not all special remotes.
This nearly works, at least for a git remote on the same disk. With it set
to 100kb/1s, the meter displays an actual bandwidth of 128 kb/s, with
occasional spikes to 160 kb/s. So it needs to delay just a bit longer...
I'm unsure why.
However, at the beginning a lot of data flows before it determines the
right bandwidth limit. A granularity of less than 1s would probably improve
that.
And, I don't know yet if it makes sense to have it be 100ks/1s rather than
100kb/s. Is there a situation where the user would want a larger
granularity? Does granulatity need to be configurable at all? I only used that
format for the config really in order to reuse an existing parser.
This can't support for external special remotes, or for ones that
themselves shell out to an external command. (Well, it could, but it
would involve pausing and resuming the child process tree, which seems
very hard to implement and very strange besides.) There could also be some
built-in special remotes that it still doesn't work for, due to them not
having a progress meter whose displays blocks the bandwidth using thread.
But I don't think there are actually any that run a separate thread for
downloads than the thread that displays the progress meter.
Sponsored-by: Graham Spencer on Patreon
This should complete the fix started in
6329997ac4, fixing the actual cause of the
test suite failure this time.
Sponsored-by: Dartmouth College's Datalad project
