Generalized AddJSONActionItemField to allow it to add several fields. Not entirely
happy with that, since the names of the fields have to be carefully chosen to
not conflict with other json fields. And fields added that way can't be parsed
back in FromJSON, except for the "fields" field that is special cased for metadata.
Still, I couldn't see another way to do it.
Also, omit file:null from the json output. Which does affect other commands,
eg git-annex whereis --all --json. Hopefully that won't break something that expects
a null file. If it did, that could be reverted, but it would be ugly to have
file:null in the unused --json
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
When a nonexistant file is passed to a command and --json-error-messages
is enabled, output a JSON object indicating the problem.
(But git ls-files --error-unmatch still displays errors about such files in
some situations.)
I don't like the duplication of the name of the command introduced by this,
but I can't see a great way around it. One way would be to pass the Command
instead.
When json is not enabled, the stderr is unchanged. This is necessary
because some commands like find have custom output. So dislaying
"find foo not found" would be wrong. So had to complicate things with
toplevelFileProblem having different output with and without json.
When not using --json-error-messages but still using --json, it displays
the error to stderr, but does display a json object without the error. It
does have an errorid though. Unsure how useful that behavior is.
Sponsored-by: Dartmouth College's Datalad project
Searched for uses of putStr and hPutStr and changed appropriate ones to filter
out control characters and quote filenames.
This notably does not make find and findkeys quote filenames in their default
output. Because they should only do that when stdout is non a pipe.
A few commands like calckey and lookupkey seem too low-level to make sense to filter
output, so skipped those.
Also when relaying output from other commands that is not progress output,
have git-annex filter out control characters.
Sponsored-by: k0ld on Patreon
This does, as a side effect, make long notes in json output not
be indented. The indentation is only needed to offset them
underneath the display of the file they apply to, so that's ok.
Sponsored-by: Brock Spratlen on Patreon
Make --batch mode handle unstaged annexed files consistently whether the
file is unlocked or not. Before this, a unstaged locked file
would have the symlink on disk examined and operated on in --batch mode,
while an unstaged unlocked file would be skipped.
Note that, when not in batch mode, unstaged files are skipped over too.
That is actually somewhat new behavior; as late as 7.20191114 a
command like `git-annex whereis .` would operate on unstaged locked
files and skip over unstaged unlocked files. That changed during
optimisation of CmdLine.Seek with apparently little fanfare or notice.
Turns out that rmurl still behaved that way when given an unstaged file
on the command line. It was changed to use lookupKeyStaged to
handle its --batch mode. That also affected its non-batch mode, but
since that's just catching up to the change earlier made to most
other commands, I have not mentioed that in the changelog.
It may be that other uses of lookupKey should also change to
lookupKeyStaged. But it may also be that would slow down some things,
or lead to unwanted behavior changes, so I've kept the changes minimal
for now.
An example of a place where the use of lookupKey is better than
lookupKeyStaged is in Command.AddUrl, where it looks to see if the file
already exists, and adds the url to the file when so. It does not matter
there whether the file is staged or not (when it's locked). The use of
lookupKey in Command.Unused likewise seems good (and faster).
Sponsored-by: Nicholas Golder-Manning on Patreon
--backend is no longer a global option, and is only accepted by commands
that actually need it.
Three commands that used to support backend but don't any longer are
watch, webapp, and assistant. It would be possible to make them support it,
but I doubt anyone used the option with these. And in the case of webapp
and assistant, the option was handled inconsistently, only taking affect
when the command is run with an existing git-annex repo, not when it
creates a new one.
Also, renamed GlobalOption etc to AnnexOption. Because there are many
options of this type that are not actually global (any more) and get
added to commands that need them.
Sponsored-by: Kevin Mueller on Patreon
Reject combinations of --batch (or --batch-keys) with options like --all or
--key or with filenames.
Most commands ignored the non-batch items when batch mode was enabled.
For some reason, addurl and dropkey both processed first the specified
non-batch items, followed by entering batch mode. Changed them to also
error out, for consistency.
Sponsored-by: Dartmouth College's Datalad project
metadata --batch --json: Reject input whose "fields" does not consist of
arrays of strings. Such invalid input used to be silently ignored.
Used to be that parseJSON for a JSONActionItem ran parseJSON separately
for the itemAdded, and if that failed, did not propagate the error. That
allowed different items with differently named fields to be parsed.
But it was actually only used to parse "fields" for metadata, so that
flexability is not needed.
The fix is just to parse "fields" as-is. AddJSONActionItemFields is needed
only because of the wonky way Command.MetaData adds onto the started json
object.
Note that this line got a dummy type signature added,
just because the type checker needs it to be some type.
itemFields = Nothing :: Maybe Bool
Since it's Nothing, it doesn't really matter what type it is,
and the value gets turned into json and is then thrown away.
Sponsored-by: Kevin Mueller on Patreon
Turns out that CommandStart actions do not have their exceptions caught,
which is why the giveup was causing a crash. Mostly these actions
do not do very much work on their own, but it does seem possible there
are other commands whose CommandStart also throws an exception.
So, my first attempt at a fix was to catch those exceptions. But,
--json-error-messages then causes a difficulty, because in order to output
a json error message, an action needs to have been started; that sets up
the json object that the error message will be included in a field of.
While it would be possible to output an object with just an error field,
this would be json output of a format that the user has no reason to
expect, that happens only in an exceptional circumstance. That is something
I have always wanted to avoid with the json output; while git-annex man
pages don't document what the json looks like, the output has always
been made to be self-describing. Eg, it includes "error-messages":[]
even when there's no errors.
With that ruled out, it doesn't seem a good idea to catch CommandStart
exceptions and display the error to stderr when --json-error-messages
is set. And so I don't know if it makes sense to catch exceptions from that
at all. Maybe I'd have a different opinion if --json-error-messages did not
exist though.
So instead, output a blank line like other batch commands do.
This also leaves open the possibility of implementing support for matching
object with metadata --json, which would also want to output a blank line
when the input didn't match.
Sponsored-by: Dartmouth College's DANDI project
New --batch-keys option added to these commands: get, drop, move, copy, whereis
git-annex-matching-options had to be reworded since some of its options
can be used to match on keys, not only files.
Sponsored-by: Luke Shumaker on Patreon
* Deal with clock skew, both forwards and backwards, when logging
information to the git-annex branch.
* GIT_ANNEX_VECTOR_CLOCK can now be set to a fixed value (eg 1)
rather than needing to be advanced each time a new change is made.
* Misuse of GIT_ANNEX_VECTOR_CLOCK will no longer confuse git-annex.
When changing a file in the git-annex branch, the vector clock to use is now
determined by first looking at the current time (or GIT_ANNEX_VECTOR_CLOCK
when set), and comparing it to the newest vector clock already in use in
that file. If a newer time stamp was already in use, advance it forward by
a second instead.
When the clock is set to a time in the past, this avoids logging with
an old timestamp, which would risk that log line later being ignored in favor
of "newer" line that is really not newer.
When a log entry has been made with a clock that was set far ahead in the
future, this avoids newer information being logged with an older timestamp
and so being ignored in favor of that future-timestamped information.
Once all clocks get fixed, this will result in the vector clocks being
incremented, until finally enough time has passed that time gets back ahead
of the vector clock value, and then it will return to usual operation.
(This latter situation is not ideal, but it seems the best that can be done.
The issue with it is, since all writers will be incrementing the last
vector clock they saw, there's no way to tell when one writer made a write
significantly later in time than another, so the earlier write might
arbitrarily be picked when merging. This problem is why git-annex uses
timestamps in the first place, rather than pure vector clocks.)
Advancing forward by 1 second is somewhat arbitrary. setDead
advances a timestamp by just 1 picosecond, and the vector clock could
too. But then it would interfere with setDead, which wants to be
overrulled by any change. So it could use 2 picoseconds or something,
but that seems weird. It could just as well advance it forward by a
minute or whatever, but then it would be harder for real time to catch
up with the vector clock when forward clock slew had happened.
A complication is that many log files contain several different peices of
information, and it may be best to only use vector clocks for the same peice
of information. For example, a key's location log file contains
InfoPresent/InfoMissing for each UUID, and it only looks at the vector
clocks for the UUID that is being changed, and not other UUIDs.
Although exactly where the dividing line is can be hard to determine.
Consider metadata logs, where a field "tag" can have multiple values set
at different times. Should it advance forward past the last tag?
Probably. What about when a different field is set, should it look at
the clocks of other fields? Perhaps not, but currently it does, and
this does not seems like it will cause any problems.
Another one I'm not entirely sure about is the export log, which is
keyed by (fromuuid, touuid). So if multiple repos are exporting to the
same remote, different vector clocks can be used for that remote.
It looks like that's probably ok, because it does not try to determine
what order things occurred when there was an export conflict.
Sponsored-by: Jochen Bartl on Patreon
Especially from borg, where the content identifier logs
all end up being the same identical file!
But also, for other imports, the location tracking logs can,
in some cases, be identical files.
Bonus optimisation: Avoid looking up (and parsing when set)
GIT_ANNEX_VECTOR_CLOCK env var every time a log is written to.
Although the lookup does happen at startup even when no
log will be written now.
No behavior changes (hopefully), just adding SeekInput and plumbing it
through to the JSON display code for later use.
Over the course of 2 grueling days.
withFilesNotInGit reimplemented in terms of seekHelper
should be the only possible behavior change. It seems to test as
behaving the same.
Note that seekHelper dummies up the SeekInput in the case where
segmentPaths' gives up on sorting the expanded paths because there are
too many input paths. When SeekInput later gets exposed as a json field,
that will result in it being a little bit wrong in the case where
100 or more paths are passed to a git-annex command. I think this is a
subtle enough problem to not matter. If it does turn out to be a
problem, fixing it would require splitting up the input
parameters into groups of < 100, which would make git ls-files run
perhaps more than is necessary. May want to revisit this, because that
fix seems fairly low-impact.
This removes all calls to inAnnex, except for some involving --batch.
It may be that the batch code could get a similar speedup, but I don't
know if people habitually pass a huge number of files through --batch
that git-annex does not need to do anything to process, so I skipped it
for now.
A few calls to ifAnnexed remain, and might be worth doing more to
convert. In particular, Command.Sync has one that would probably speed
it up by a good amount.
(also removed some dead code from Command.Lock)
Added annex.skipunknown git config, that can be set to false to change the
behavior of commands like `git annex get foo*`, to not skip over files/dirs
that are not checked into git and are explicitly listed in the command
line.
Significant complexity was needed to handle git-annex add, which uses some
git ls-files calls, but needs to not use --error-unmatch because of course
the files are not known to git.
annex.skipunknown is planned to change to default to false in a
git-annex release in early 2022. There's a todo for that.
A couple of these were probably actual bugs in edge cases. Most of the
changes I'm fine with. The fact that aeson's object returns sometihng
that we know will be an Object, but the type checker does not know is
kind of annoying.
The hoped for optimisation of CommandStart with -J did not materialize.
In fact, not runnign CommandStart in parallel is slower than -J3.
So, CommandStart are still run in parallel.
(The actual bad performance I've been seeing with -J in my big repo
has to do with building the remoteList.)
But, this is still progress toward making -J faster, because it gets rid
of the onlyActionOn roadblock in the way of making CommandCleanup jobs
run separate from CommandPerform jobs.
Added OnlyActionOn constructor for ActionItem which fixes the
onlyActionOn breakage in the last commit.
Made CustomOutput include an ActionItem, so even things using it can
specify OnlyActionOn.
In Command.Move and Command.Sync, there were CommandStarts that used
includeCommandAction, so output messages, which is no longer allowed.
Fixed by using startingCustomOutput, but that's still not quite right,
since it prevents message display for the includeCommandAction run
inside it too.
The goal is to be able to run CommandStart in the main thread when -J is
used, rather than unncessarily passing it off to a worker thread, which
incurs overhead that is signficant when the CommandStart is going to
quickly decide to stop.
To do that, the message it displays needs to be displayed in the worker
thread, after the CommandStart has run.
Also, the change will mean that CommandStart will no longer necessarily
run with the same Annex state as CommandPerform. While its docs already
said it should avoid modifying Annex state, I audited all the
CommandStart code as part of the conversion. (Note that CommandSeek
already sometimes runs with a different Annex state, and that has not been
a source of any problems, so I am not too worried that this change will
lead to breakage going forward.)
The only modification of Annex state I found was it calling
allowMessages in some Commands that default to noMessages. Dealt with
that by adding a startCustomOutput and a startingUsualMessages.
This lets a command start with noMessages and then select the output it
wants for each CommandStart.
One bit of breakage: onlyActionOn has been removed from commands that used it.
The plan is that, since a StartMessage contains an ActionItem,
when a Key can be extracted from that, the parallel job runner can
run onlyActionOn' automatically. Then commands won't need to worry about
this detail. Future work.
Otherwise, this was a fairly straightforward process of making each
CommandStart compile again. Hopefully other behavior changes were mostly
avoided.
In a few cases, a command had a CommandStart that called a CommandPerform
that then called showStart multiple times. I have collapsed those
down to a single start action. The main command to perhaps suffer from it
is Command.Direct, which used to show a start for each file, and no
longer does.
Another minor behavior change is that some commands used showStart
before, but had an associated file and a Key available, so were changed
to ShowStart with an ActionItemAssociatedFile. That will not change the
normal output or behavior, but --json output will now include the key.
This should not break it for anyone using a real json parser.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
This is groundwork for nested seek loops, eg seeking over all files and
then performing commandActions on a list of remotes, which can be done
concurrently.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Added -z option to git-annex commands that use --batch, useful for
supporting filenames containing newlines.
It only controls input to --batch, the output will still be line delimited
unless --json or etc is used to get some other output. While git often
makes -z affect both input and output, I don't like trying them together,
and making it affect output would have been a significant complication,
and also git-annex output is generally not intended to be machine parsed,
unless using --json or a format option.
Commands that take pairs like "file key" still separate them with a space
in --batch mode. All such commands take care to support filenames with
spaces when parsing that, so there was no need to change it, and it would
have needed significant changes to the batch machinery to separate tose
with a null.
To make fromkey and registerurl support -z, I had to give them a --batch
option. The implicit batch mode they enter when not provided with input
parameters does not support -z as that would have complicated option
parsing. Seemed better to move these toward using the same --batch as
everything else, though the implicit batch mode can still be used.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Actually very straightforward reuse of the metadata log file code.
Although I had to add a todo item as git-annex forget won't clean up
dead remote's metadata yet.
This would be worth adding to the external special remote interface
sometime. Have not opened a todo though, guess I'll wait until something
needs it.
This commit was supported by the NSF-funded DataLad project.
When --batch is used with matching options like --in, --metadata, etc, only
operate on the provided files when they match those options. Otherwise, a
blank line is output in the batch protocol.
Affected commands: find, add, whereis, drop, copy, move, get
In the case of find, the documentation for --batch already said it honored
the matching options. The docs for the rest didn't, but it makes sense to
have them honor them. While this is a behavior change, why specify the
matching options with --batch if you didn't want them to apply?
Note that the batch output for all of the affected commands could
already output a blank line in other cases, so batch users should
already be prepared to deal with it.
git-annex metadata didn't seem worth making support the matching options,
since all it does is output metadata or set metadata, the use cases for
using it in combination with the martching options seem small. Made it
refuse to run when they're combined, leaving open the possibility for later
support if a use case develops.
This commit was sponsored by Brett Eisenberg on Patreon.
As long as all code imports Utility.Aeson rather than Data.Aeson,
and no Strings that may contain utf-8 characters are used for eg, object
keys via T.pack, this is guaranteed to fix the problem everywhere that
git-annex generates json.
It's kind of annoying to need to wrap ToJSON with a ToJSON', especially
since every data type that has a ToJSON instance has to be ported over.
However, that only took 50 lines of code, which is worth it to ensure full
coverage. I initially tried an alternative approach of a newtype FileEncoded,
which had to be used everywhere a String was fed into aeson, and chasing
down all the sites would have been far too hard. Did consider creating an
intentionally overlapping instance ToJSON String, and letting ghc fail
to build anything that passed in a String, but am not sure that wouldn't
pollute some library that git-annex depends on that happens to use ToJSON
String internally.
This commit was supported by the NSF-funded DataLad project.
Added --json-error-messages option, which includes error messages in the
json output, rather than outputting them to stderr.
The actual rediretion of errors is not implemented yet, this is only
the docs and option plumbing.
This commit was supported by the NSF-funded DataLad project.
Clean up some uses of showStart with "" for the file,
or in some cases, a non-filename description string. That would
generate bad json, although none of the commands doing that
supported --json.
Using "" for the file resulted in output like "foo rest";
now the extra space is eliminated.
This commit was sponsored by Fernando Jimenez on Patreon.
git annex add, git annex lock etc make multiple seek passes,
and each seek pass checked that files existed. That was unncessary
redundant work.
Fixed by adding a new WorkTreeItem type, make seek actions use it,
and check that the files exist when constructing it.
This commit was supported by the NSF-funded DataLad project.
Motivation is to remove all metadata when it gets copied from a previous
version of the file, and that is not deisrable.
This commit was supported by the NSF-funded DataLad project.
Can be used to override the default timestamps used in log files in the
git-annex branch. This is a dangerous environment variable; use with
caution.
Note that this only affects writing to the logs on the git-annex branch.
It is not used for metadata in git commits (other env vars can be set for
that).
There are many other places where timestamps are still used, that don't
get committed to git, but do touch disk. Including regular timestamps
of files, and timestamps embedded in some files in .git/annex/, including
the last fsck timestamp and timestamps in transfer log files.
A good way to find such things in git-annex is to get for getPOSIXTime and
getCurrentTime, although some of the results are of course false positives
that never hit disk (unless git-annex gets swapped out..)
So this commit does NOT necessarily make git-annex comply with some HIPPA
privacy regulations; it's up to the user to determine if they can use it in
a way compliant with such regulations.
Benchmarking: It takes 0.00114 milliseconds to call getEnv
"GIT_ANNEX_VECTOR_CLOCK" when that env var is not set. So, 100 thousand log
files can be written with an added overhead of only 0.114 seconds. That
should be by far swamped by the actual overhead of writing the log files
and making the commit containing them.
This commit was supported by the NSF-funded DataLad project.
1 microsecond delay is ugly.. but, maintaining an queue of a list of timestamps
and taking a new one from the queue each time around, or maintaining a timestamp
counter, would probably be slower.
ghc 8 added backtraces on uncaught errors. This is great, but git-annex was
using error in many places for a error message targeted at the user, in
some known problem case. A backtrace only confuses such a message, so omit it.
Notably, commands like git annex drop that failed due to eg, numcopies,
used to use error, so had a backtrace.
This commit was sponsored by Ethan Aubin.
This makes -Jn work with --json and --quiet, where before
setting -Jn disabled those options.
Concurrent json output is currently a mess though since threads output
chunks over top of one-another.
Note that get --from foo --failed will get things that a previous get --from bar
tried and failed to get, etc. I considered making --failed only retry
transfers from the same remote, but it was easier, and seems more useful,
to not have the same remote requirement.
Noisy due to some refactoring into Types/
metadata --json output format has changed, adding a inner json object
named "fields" which contains only the fields and their values.
This should be easier to parse than the old format, which mixed up
metadata fields with other keys in the json object.
Any consumers of the old format will need to be updated.
This adds a dependency on unordered-containers for parsing MetaData
from JSON, but it's a free dependency; aeson pulls in that library.
