Fix some cases where handling of keys with extensions varied depending on
the locale.
A filename with a unicode extension would before generate a key with an
extension in a unicode locale, but not in LANG=C, because the extension
was not all alphanumeric. Also the the length of the extension could be
counted differently depending on the locale.
In a non-unicode locale, git-annex migrate would see that the extension
was not all alphanumeric and want to "upgrade" it. Now that doesn't happen.
As far as backwards compatability, this does mean that unicode
extensions are counted by the number of bytes, not number of characters.
So, if someone is using unicode extensions, they may find git-annex
stops using them when adding files, because their extensions are too
long. Keys already in their repo with the "too long" extensions will
still work though, so this only prevents adding the same content with
the same extension generating the same key. Documented this by
documenting that annex.maxextensionlength is a number of bytes.
Also, if a filename has an extension that is not valid utf-8 and the
locale is utf-8, the extension will be allowed now, and an old
git-annex, in the same locale would not, and would also want to
"upgrade" that.
the encode' and decode' functions on Windows should not apply the
filesystem encoding, which does not work there. Instead, convert to and
from UTF-8.
Also, avoid exporting encodeW8 and decodeW8. Both use the filesystem
encoding, so won't work as expected on windows.
Adds a dependency on filepath-bytestring, an as yet unreleased fork of
filepath that operates on RawFilePath.
Git.Repo also changed to use RawFilePath for the path to the repo.
This does eliminate some RawFilePath -> FilePath -> RawFilePath
conversions. And filepath-bytestring's </> is probably faster.
But I don't expect a major performance improvement from this.
This is mostly groundwork for making Annex.Location use RawFilePath,
which will allow for a conversion-free pipleline.
Finally builds (oh the agoncy of making it build), but still very
unmergable, only Command.Find is included and lots of stuff is badly
hacked to make it compile.
Benchmarking vs master, this git-annex find is significantly faster!
Specifically:
num files old new speedup
48500 4.77 3.73 28%
12500 1.36 1.02 66%
20 0.075 0.074 0% (so startup time is unchanged)
That's without really finishing the optimization. Things still to do:
* Eliminate all the fromRawFilePath, toRawFilePath, encodeBS,
decodeBS conversions.
* Use versions of IO actions like getFileStatus that take a RawFilePath.
* Eliminate some Data.ByteString.Lazy.toStrict, which is a slow copy.
* Use ByteString for parsing git config to speed up startup.
It's likely several of those will speed up git-annex find further.
And other commands will certianly benefit even more.
This will speed up the common case where a Key is deserialized from
disk, but is then serialized to build eg, the path to the annex object.
Previously attempted in 4536c93bb2
and reverted in 96aba8eff7.
The problems mentioned in the latter commit are addressed now:
Read/Show of KeyData is backwards-compatible with Read/Show of Key from before
this change, so Types.Distribution will keep working.
The Eq instance is fixed.
Also, Key has smart constructors, avoiding needing to remember to update
the cached serialization.
Used git-annex benchmark:
find is 7% faster
whereis is 3% faster
get when all files are already present is 5% faster
Generally, the benchmarks are running 0.1 seconds faster per 2000 files,
on a ram disk in my laptop.
using a blake2 variant optimised for 4-way CPUs
This had been deferred because the Debian package of cryptonite, and
possibly other builds, was broken for blake2bp, but I've confirmed #892855
is fixed.
This commit was sponsored by Brett Eisenberg on Patreon.
Drop support for building with ghc older than 8.4.4, and with older
versions of serveral haskell libraries than will be included in Debian 10.
The only remaining version ifdefs in the entire code base are now a couple
for aws!
This commit should only be merged after the Debian 10 release.
And perhaps it will need to wait longer than that; it would make
backporting new versions of git-annex to Debian 9 (stretch) which
has been actively happening as recently as this year.
This commit was sponsored by Ilya Shlyakhter.
The hash was actually not being fully evaluated before, used rnf to fix
that.
The added dependency on deepseq is a free dependency, because eg text
depends on it.
No behavior changes, but this shows everywhere that a progress meter
could be displayed when hashing a file to add to the annex.
Many of the places don't make sense to display a progress meter though,
eg when importing the copy of the file probably swamps the hashing of
the file.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
Adding that field broke the Read/Show serialization back-compat,
and also the Eq and Ord instances were not blinded to it, which broke
git annex fsck and probably more.
I think that the new approach used in formatKeyVariety will be nearly
as fast, but have not benchmarked it.
This reverts commit 4536c93bb2.
That broke Read/Show of a Key, and unfortunately Key is read in at least
one place; the GitAnnexDistribution data type.
It would be worth bringing this optimisation back, but it would need
either a custom Read/Show instance that preserves back-compat, or
wrapping Key in a data type that contains the serialization, or changing
how GitAnnexDistribution is serialized.
Also, the Eq instance would need to compare keys with and without a
cached seralization the same.
This will speed up the common case where a Key is deserialized from
disk, but is then serialized to build eg, the path to the annex object.
It means that every place a Key has any of its fields changed, the cache
has to be dropped. I've grepped and found them all. But, it would be
better to avoid that gotcha somehow..
Added annex.maxextensionlength for use cases where extensions longer than 4
characters are needed.
This commit was sponsored by Henrik Riomar on Patreon.
In 2013, I wrote "Cryptohash benchmarks 90 to 101% faster than external
hashers". Re-benchmarking today, I found cryptonite's sha256 consistently
outperformed coreutils by 10% for large files. Tested 10 mb, 100 mb, 1 gb
files with both sha256 and sha512. And for smaller files, the external
process startup time swamps the hash time.
Perhaps cryptonite has improved. Or it could just do better on my
current CPU Intel(R) Pentium(R) CPU 4410Y @ 1.50GHz). Anyway, even if cryptonite
is slower in some situations, seems likely it would only be marginally slower;
it's got the same class of highly optimised C code under the hood as coreutils.
The main difference between the two sha256 implementations seems to be
how much of the inner loop they unroll..
This commit was sponsored by Henrik Riomar on Patreon.
* migrate: Fix bug in migration between eg SHA256 and SHA256E,
that caused the extension to be included in SHA256 keys,
and omitted from SHA256E keys.
(Bug introduced in version 6.20170214)
* migrate: Check for above bug when migrating from SHA256 to SHA256
(and same for SHA1 to SHA1 etc), and remove the extension that should
not be in the SHA256 key.
* fsck: Detect and warn when keys need an upgrade, either to fix up
from the above migrate bug, or to add missing size information
(a long ago transition), or because of a few other past key related
bugs.
This commit was sponsored by Henrik Riomar on Patreon.
Some blake hash varieties were not yet available in that version.
Rather than tracking exact details of what cryptonite supported when,
disable blake unless using a current cryptonite.
There are a lot of different variants and sizes, I suppose we might as well
export all the common ones.
Bump dep to cryptonite to 0.16, earlier versions lacked BLAKE2 support.
Even android has 0.16 or newer.
On Debian, Blake2bp_512 is buggy, so I have omitted it for now.
http://bugs.debian.org/892855
This commit was sponsored by andrea rota.
Do not treat parts of the filename that contain punctuation or other
non-alphanumeric characters as extensions. Before, such characters were
filtered out.
Note that in 45308ec78b "foo.ba__________r"
was munged to ".bar" and so incorrectly treated as an extension. That was
fixed by changing the filter order, but not allowing punctuation seems a
better fix.
This assumes that extensions containing punctuation are rare. "_" seems the
most likely character; I used it in ikiwiki "._comment" files. But I can't
recall seeing it anywhere else. It certianly seems that no commonly used
extensions contain punctuation. If git-annex doesn't treat "._comment"
as an extension, it's not likely to break software that expects to see that
extension like some software expects to see .epub or .mp3.
This commit was sponsored by Jack Hill on Patreon.
This avoids warnings from stack about the module not being listed in the
cabal file. So, the generated file is also renamed to Build/SysConfig.
Note that the setup program seems to be cached despite these changes; I
had to cabal clean to get cabal to update it so that Build/SysConfig was
written.
This commit was sponsored by Jochen Bartl on Patreon.
To work around the problem that the external special remote protocol does
not support keys containing spaces.
This commit was sponsored by Denis Dzyubenko on Patreon.
Cryptonite is faster and allocates less, and I want to get rid of
MissingH use.
Note that the new dependency on memory is free; it's a dependency of
cryptonite.
This commit was supported by the NSF-funded DataLad project.
Where before the "name" of a key and a backend was a string, this makes
it a concrete data type.
This is groundwork for allowing some varieties of keys to be disabled
in file2key, so git-annex won't use them at all.
Benchmarks ran in my big repo:
old git-annex info:
real 0m3.338s
user 0m3.124s
sys 0m0.244s
new git-annex info:
real 0m3.216s
user 0m3.024s
sys 0m0.220s
new git-annex find:
real 0m7.138s
user 0m6.924s
sys 0m0.252s
old git-annex find:
real 0m7.433s
user 0m7.240s
sys 0m0.232s
Surprising result; I'd have expected it to be slower since it now parses
all the key varieties. But, the parser is very simple and perhaps
sharing KeyVarieties uses less memory or something like that.
This commit was supported by the NSF-funded DataLad project.
Turns out that Data.List.Utils.split is slow and makes a lot of
allocations. Here's a much simpler single character splitter that behaves
the same (even in wacky corner cases) while running in half the time and
75% the allocations.
As well as being an optimisation, this helps move toward eliminating use of
missingh.
(Data.List.Split.splitOn is nearly as slow as Data.List.Utils.split and
allocates even more.)
I have not benchmarked the effect on git-annex, but would not be surprised
to see some parsing of eg, large streams from git commands run twice as
fast, and possibly in less memory.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Fixes a minor fd leak, never more than 1 in normal use,
which broke the test suite when I tried to write to
a file that was still open for a previous hashing.
sideAction is for things not generally related to the current action being
performed. And, it adds a newline after the side action. This was not the
right thing to use for stuff like "checksum", where doing a checksum is
part of the git annex get process, and indeed we want it to display
"(checksum...) ok"
While cryptohash has SHA3 support, it has not been updated for the final
version of the spec. Note that cryptonite has not been ported to all arches
that cryptohash builds on yet.
This way, if a system's sha1sum etc is broken, it will be tried if
git-annex was built to use it, but at least it will fall back to using
internal hashing when it fails.
A side benefit of this is that hashFile consistently throws an IOError if
the file is unable to be read. In particular, if the disk is failing with
IO errors, and external hash command is used, it used to throw a user error
with the error message from externalSHA. Now, the external hash command
will fail, that message will be printed as a warning, and it'll fall back
to the internal hash command. If the disk IO error is not intermittent, it
will re-occur, and so an IOError will be thrown.
Of course, this can mean it reads a file twice, but only in edge cases.
This is especially useful because the caller doesn't need to generate valid
url keys, which involves some escaping of characters, and may involve
taking a md5sum of the url if it's too long.
Avoid using fileSize which maxes out at just 2 gb on Windows.
Instead, use hFileSize, which doesn't have a bounded size.
Fixes support for files > 2 gb on Windows.
Note that the InodeCache code only needs to compare a file size,
so it doesn't matter it the file size wraps. So it has been
left as-is. This was necessary both to avoid invalidating existing inode
caches, and because the code passed FileStatus around and would have become
more expensive if it called getFileSize.
This commit was sponsored by Christian Dietrich.
This fixes all instances of " \t" in the code base. Most common case
seems to be after a "where" line; probably vim copied the two space layout
of that line.
Done as a background task while listening to episode 2 of the Type Theory
podcast.
This only performs some basic tests so far; no testing of chunking or
resuming. Also, the existing encryption type of the remote is used; it
would be good later to derive an encrypted and a non-encrypted version of
the remote and test them both.
This commit was sponsored by Joseph Liu.
Needed for resuming from chunks.
Url keys are considered not stable. I considered treating url keys with a
known size as stable, but just don't feel that is enough information.
Added new fields for chunk number, and chunk size. These will not appear
in normal keys ever, but will be used for chunked data stored on special
remotes.
This commit was sponsored by Jouni K Seppanen.
Note that the hash backends were made to stop printing a (checksum..)
message as part of this, since it showed up without a file when deciding
whether to act on a file. Should have probably removed that message a while
ago anyway, I suppose.
FAT has a lot of characters it does not allow in filenames, like ? and *
It's probably the worst offender, but other filesystems also have
limitiations.
In 2011, I made keyFile escape : to handle FAT, but missed the other
characters. It also turns out that when I did that, I was also living
dangerously; any existing keys that contained a : had their object
location change. Oops.
So, adding new characters to escape to keyFile is out. Well, it would be
possible to make keyFile behave differently on a per-filesystem basis, but
this would be a real nightmare to get right. Consider that a rsync special
remote uses keyFile to determine the filenames to use, and we don't know
the underlying filesystem on the rsync server..
Instead, I have gone for a solution that is backwards compatable and
simple. Its only downside is that already generated URL and WORM keys
might not be able to be stored on FAT or some other filesystem that
dislikes a character used in the key. (In this case, the user can just
migrate the problem keys to a checksumming backend. If this became a big
problem, fsck could be made to detect these and suggest a migration.)
Going forward, new keys that are created will escape all characters that
are likely to cause problems. And if some filesystem comes along that's
even worse than FAT (seems unlikely, but here it is 2013, and people are
still using FAT!), additional characters can be added to the set that are
escaped without difficulty.
(Also, made WORM limit the part of the filename that is embedded in the key,
to deal with filesystem filename length limits. This could have already
been a problem, but is more likely now, since the escaping of the filename
can make it longer.)
This commit was sponsored by Ian Downes
SHA3 is still waiting for final standardization.
Although this is looking less likely given
https://www.cdt.org/blogs/joseph-lorenzo-hall/2409-nist-sha-3
In the meantime, cryptohash implements skein, and it's used by some of the
haskell ecosystem (for yesod sessions, IIRC), so this implementation is
likely to continue working. Also, I've talked with the cryprohash author
and he's a reasonable guy.
It makes sense to have an alternate high security hash, in case some
horrible attack is found against SHA2 tomorrow, or in case SHA3 comes out
and worst fears are realized.
I'd also like to support using skein for HMAC. But no hurry there and
a new version of cryptohash has much nicer HMAC code, so I will probably
wait until I can use that version.
This is a massive win on OSX, which doesn't have a sha256sum normally.
Only use external hash commands when the file is > 1 mb,
since cryptohash is quite close to them in speed.
SHA is still used to calculate HMACs. I don't quite understand
cryptohash's API for those.
Used the following benchmark to arrive at the 1 mb number.
1 mb file:
benchmarking sha256/internal
mean: 13.86696 ms, lb 13.83010 ms, ub 13.93453 ms, ci 0.950
std dev: 249.3235 us, lb 162.0448 us, ub 458.1744 us, ci 0.950
found 5 outliers among 100 samples (5.0%)
4 (4.0%) high mild
1 (1.0%) high severe
variance introduced by outliers: 10.415%
variance is moderately inflated by outliers
benchmarking sha256/external
mean: 14.20670 ms, lb 14.17237 ms, ub 14.27004 ms, ci 0.950
std dev: 230.5448 us, lb 150.7310 us, ub 427.6068 us, ci 0.950
found 3 outliers among 100 samples (3.0%)
2 (2.0%) high mild
1 (1.0%) high severe
2 mb file:
benchmarking sha256/internal
mean: 26.44270 ms, lb 26.23701 ms, ub 26.63414 ms, ci 0.950
std dev: 1.012303 ms, lb 925.8921 us, ub 1.122267 ms, ci 0.950
variance introduced by outliers: 35.540%
variance is moderately inflated by outliers
benchmarking sha256/external
mean: 26.84521 ms, lb 26.77644 ms, ub 26.91433 ms, ci 0.950
std dev: 347.7867 us, lb 210.6283 us, ub 571.3351 us, ci 0.950
found 6 outliers among 100 samples (6.0%)
import Crypto.Hash
import Data.ByteString.Lazy as L
import Criterion.Main
import Common
testfile :: FilePath
testfile = "/run/shm/data" -- on ram disk
main = defaultMain
[ bgroup "sha256"
[ bench "internal" $ whnfIO internal
, bench "external" $ whnfIO external
]
]
sha256 :: L.ByteString -> Digest SHA256
sha256 = hashlazy
internal :: IO String
internal = show . sha256 <$> L.readFile testfile
external :: IO String
external = do
s <- readProcess "sha256sum" [testfile]
return $ fst $ separate (== ' ') s
Started with a problem when running addurl on a really long url,
because the whole url is munged into the filename. Ended up doing
a fairly extensive review for places where filenames could get too large,
although it's hard to say I'm not missed any..
Backend.Url had a 128 character limit, which is fine when the limit is 255,
but not if it's a lot shorter on some systems. So check the pathconf()
limit. Note that this could result in fromUrl creating different keys
for the same url, if run on systems with different limits. I don't see
this is likely to cause any problems. That can already happen when using
addurl --fast, or if the content of an url changes.
Both Command.AddUrl and Backend.Url assumed that urls don't contain a
lot of multi-byte unicode, and would fail to truncate an url that did
properly.
A few places use a filename as the template to make a temp file.
While that's nice in that the temp file name can be easily related back to
the original filename, it could lead to `git annex add` failing to add a
filename that was at or close to the maximum length.
Note that in Command.Add.lockdown, the template is still derived from the
filename, just with enough space left to turn it into a temp file.
This is an important optimisation, because the assistant may lock down
a bunch of files all at once, and using the same template for all of them
would cause openTempFile to iterate through the same set of names,
looking for an unused temp file. I'm not very happy with the relatedTemplate
hack, but it avoids that slowdown.
Backend.WORM does not limit the filename stored in the key.
I have not tried to change that; so git annex add will fail on really long
filenames when using the WORM backend. It seems better to preserve the
invariant that a WORM key always contains the complete filename, since
the filename is the only unique material in the key, other than mtime and
size. Since nobody has complained about add failing (I think I saw it
once?) on WORM, probably it's ok, or nobody but me uses it.
There may be compatability problems if using git annex addurl --fast
or the WORM backend on a system with the 255 limit and then trying to use
that repo in a system with a smaller limit. I have not tried to deal with
those.
This commit was sponsored by Alexander Brem. Thanks!
Run the same code git-annex used to get the sha, including its sanity
checking. Much better than old grep. Should detect FreeBSD systems with
sha commands that output in stange format.
This after fielding a bug where git-annex was built with a sha256 program
whose output checked out, but was then run with one that output lines
like:
SHA256 (file) = <sha here>
Which it then parsed as having a SHA256 of "SHA256"!
Now the output of the command is required to be of the right length,
and contain only the right characters.
* SHA*E backends: Exclude non-alphanumeric characters from extensions.
* migrate: Remove leading \ in SHA* checksums, and non-alphanumerics
from extensions of SHA*E keys.
* Bugfix: Remove leading \ from checksums output by sha*sum commands,
when the filename contains \ or a newline. Closes: #696384
* fsck: Still accept checksums with a leading \ as valid, now that
above bug is fixed.
* migrate: Remove leading \ in checksums
The default backend used when adding files to the annex is changed from
SHA256 to SHA256E, to simplify interoperability with OSX, media players,
and various programs that needlessly look at symlink targets.
To get old behavior, add a .gitattributes containing: * annex.backend=SHA256
Make Utility.Process wrap the parts of System.Process that I use,
and add debug logging to them.
Also wrote some higher-level code that allows running an action
with handles to a processes stdin or stdout (or both), and checking
its exit status, all in a single function call.
As a bonus, the debug logging now indicates whether the process
is being run to read from it, feed it data, chat with it (writing and
reading), or just call it for its side effect.
Test suite now passes with -threaded!
I traced back all the hangs with -threaded to System.Cmd.Utils. It seems
it's just crappy/unsafe/outdated, and should not be used. System.Process
seems to be the cool new thing, so converted all the code to use it
instead.
In the process, --debug stopped printing commands it runs. I may try to
bring that back later.
Note that even SafeSystem was switched to use System.Process. Since that
was a modified version of code from System.Cmd.Utils, it needed to be
converted too. I also got rid of nearly all calls to forkProcess,
and all calls to executeFile, which I'm also doubtful about working
well with -threaded.
Using Crypto's version of the hashes would be another option.
I need to benchmark it. The SHA2 library (which provides SHA1 also,
confusing name) may be the fastest option, but is not currently in Debian.
Kqueue needs to remember which files failed to be added due to being open,
and retry them. This commit gets the data in place for such a retry thread.
Broke KeySource out into its own file, and added Eq and Ord instances
so it can be stored in a Set.
Fscking a remote is now supported. It's done by retrieving
the contents of the specified files from the remote, and checking them,
so can be an expensive operation.
(Several optimisations are possible, to speed it up, of course.. This is
the slow and stupid remote fsck to start with.)
Still, if the remote is a special remote, or a git repository that you
cannot run fsck in locally, it's nice to have the ability to fsck it.
If you have any directory special remotes, now would be a good time to
fsck them, in case you were hit by the data loss bug fixed in the
previous release!
