Commit 4bf7940d6b introduced this
problem, but was otherwise doing a good thing. Problem being
that fileRef "/foo" used to return ":./foo", which was actually wrong,
but as long as there was no foo in the local repository, catKey
could operate on it without crashing. After that fix though, fileRef
would return eg "../../foo", resulting in fileRef returning
":./../../foo", which will make git cat-file crash since that's
not a valid path in the repo.
Fix is simply to make fileRef detect paths outside the repo and return
Nothing. Then catKey can be skipped. This needed several bugfixes to
dirContains as well, in previous commits.
In Command.Smudge, this led to needing to check for Nothing. That case
should actually never happen, because the fileoutsiderepo check will
detect it earlier.
Sponsored-by: Brock Spratlen on Patreon
This eliminates the distinction between decodeBS and decodeBS', encodeBS
and encodeBS', etc. The old implementation truncated at NUL, and the
primed versions had to do extra work to avoid that problem. The new
implementation does not truncate at NUL, and is also a lot faster.
(Benchmarked at 2x faster for decodeBS and 3x for encodeBS; more for the
primed versions.)
Note that filepath-bytestring 1.4.2.1.8 contains the same optimisation,
and upgrading to it will speed up to/fromRawFilePath.
AFAIK, nothing relied on the old behavior of truncating at NUL. Some
code used the faster versions in places where I was sure there would not
be a NUL. So this change is unlikely to break anything.
Also, moved s2w8 and w82s out of the module, as they do not involve
filesystem encoding really.
Sponsored-by: Shae Erisson on Patreon
Fix behavior of several commands, including reinject, addurl, and rmurl
when given an absolute path to an unlocked file, or a relative path that
leaves and re-enters the repository.
To avoid slowing down all the cases where the paths are already ok
with an unncessary call to getCurrentDirectory, put in an optimisation
in relPathCwdToFile. That will probably also speed up other parts of
git-annex by some small amount, but I have not benchmarked.
Note that I did not convert branchFileRef, because it seems likely that
it will be used with a file that is not provided by the user, so is already
in a sane format. This is certainly true for the way git-annex uses it,
though maybe arguable to the extent Git.Ref is a reusable library.
Seems that hasOrigin was never finding origin's git-annex branch, so a new
one got created each time. And so then it later needed to merge the two
branches, which is expensive.
Added --no-track to git branch to avoid it displaying a message about
setting up tracking branches. Of course there's no reason to make the
git-annex branch a tracking branch since git-annex auto-merges it.
Attoparsec parser for diff-tree.
Changed fromRef back to producing a String, to avoid needing to convert
every use of it. However, this does mean I'm going to miss some
opportunities where fromRef is used and the result converted back to a
ByteString. Would be worth revisiting that at some point maybe.
Adds a dependency on filepath-bytestring, an as yet unreleased fork of
filepath that operates on RawFilePath.
Git.Repo also changed to use RawFilePath for the path to the repo.
This does eliminate some RawFilePath -> FilePath -> RawFilePath
conversions. And filepath-bytestring's </> is probably faster.
But I don't expect a major performance improvement from this.
This is mostly groundwork for making Annex.Location use RawFilePath,
which will allow for a conversion-free pipleline.
Finally builds (oh the agoncy of making it build), but still very
unmergable, only Command.Find is included and lots of stuff is badly
hacked to make it compile.
Benchmarking vs master, this git-annex find is significantly faster!
Specifically:
num files old new speedup
48500 4.77 3.73 28%
12500 1.36 1.02 66%
20 0.075 0.074 0% (so startup time is unchanged)
That's without really finishing the optimization. Things still to do:
* Eliminate all the fromRawFilePath, toRawFilePath, encodeBS,
decodeBS conversions.
* Use versions of IO actions like getFileStatus that take a RawFilePath.
* Eliminate some Data.ByteString.Lazy.toStrict, which is a slow copy.
* Use ByteString for parsing git config to speed up startup.
It's likely several of those will speed up git-annex find further.
And other commands will certianly benefit even more.
Goal is to make git-annex faster by using ByteString for all the
worktree traversal. For now, this is focusing on Command.Find,
in order to benchmark how much it helps. (All other commands are
temporarily disabled)
Currently in a very bad unbuildable in-between state.
Needed for the --quiet to actually shut it up. The extra verification
this makes it do should be fine, as this is supposed to really return a
single tree's sha.
git rev-parse --quiet avoids "fatal: Invalid object name" when the
branch does not exist. Git.Ref.tree already returned a Maybe, so callers
already handle those cases themselves.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
The branch is only updated once the export is 100% complete. This way,
if an export is started but interrupted and so the remote does not yet
contain some of the files, an import will make a commit on the old
branch, and so won't delete the missing files.
Seems I forgot to fully test that feature when documenting it.
git rev-parse needs a colon after a branch to de-reference the tree
it points to, rather than the commit. But that had it adding an extra
colon when the user specified "branch:subdir". So, check if there is a
colon before adding one.
This commit was sponsored by Francois Marier on Patreon.
Also deletes any tagged pushes that the assistant might have done,
since those would also prevent resetting a branch back.
This commit was sponsored by andrea rota.
Turns out that Data.List.Utils.split is slow and makes a lot of
allocations. Here's a much simpler single character splitter that behaves
the same (even in wacky corner cases) while running in half the time and
75% the allocations.
As well as being an optimisation, this helps move toward eliminating use of
missingh.
(Data.List.Split.splitOn is nearly as slow as Data.List.Utils.split and
allocates even more.)
I have not benchmarked the effect on git-annex, but would not be surprised
to see some parsing of eg, large streams from git commands run twice as
fast, and possibly in less memory.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
* sync: Previously, when run in a branch with a slash in its name,
such as "foo/bar", the sync branch was "synced/bar". That conflicted
with the sync branch used for branch "bar", so has been changed to
"synced/foo/bar".
* adjust: Previously, when adjusting a branch with a slash in its name,
such as "foo/bar", the adjusted branch was "adjusted/bar(unlocked)".
That conflicted with the adjusted branch used for branch "bar",
so has been changed to "adjusted/foo/bar(unlocked)"
* Also, running sync in an adjusted branch did not correctly sync
changes back to the parent branch when it had a slash in its name.
This bug has been fixed.
Eliminate use of Git.Ref.under and Git.Ref.basename; using
Git.Ref.underBase and Git.Ref.base make everything handle deep branches
correctly.
Probably noone was adjusting deep branches, and v6 is still experimental
anyway, so I'm not going to worry about the mess that was left by that bug.
In the case of git-annex sync, using a fixed git-annex with an old unfixed
one will mean they use different sync branches for a deep branch, and so
they may stop syncing until the old one is upgraded. However, that's only
a problem when syncing between repositories without going via a central
bare repository. Added a warning about this to the CHANGELOG, but it's
probably not going to affect many people at all.
This commit was sponsored by Riku Voipio.
This makes the direct mode to v6 upgrade able to be performed in one clone
of a repository without affecting other clones, which can continue using v5
and direct mode.
So, it will pull and push the original branch, not the adjusted one.
And, for merging, it will use updateAdjustedBranch (not implemented yet).
Note that remaining uses of Git.Branch.current need to be checked too;
for things that should act on the original branch, and not the adjusted
branch.
Seen for example, a newly checked out git submodule. In this case,
.git/HEAD is a raw sha, rather than the usual reference to a ref.
Removed currentSha in passing, since it was a more roundabout way of
doing what headSha does, and headSha is more robust.
Removed instance, got it all to build using fromRef. (With a few things
that really need to show something using a ref for debugging stubbed out.)
Then added back Read instance, and made Logs.View use it for serialization.
This changes the view log format.
The assistant's commit code also always avoids git commit, for simplicity.
Indirect mode sync still does a git commit -a to catch unstaged changes.
Note that this means that direct mode sync no longer runs the pre-commit
hook or any other hooks git commit might call. The git annex pre-commit
hook action for direct mode is however explicitly run. (The assistant
already ran git commit with hooks disabled, so no change there.)
This works for both direct and indirect mode.
It may need some performance tuning.
Note that unlike git status, it only shows the status of the work tree, not
the status of the index. So only one status letter, not two .. and since
files that have been added and not yet committed do not differ between the
work tree and the index, they are not shown. Might want to add display of
the index vs the last commit eventually.
This commit was sponsored by an unknown bitcoin contributor, whose
contribution as been going up lately! ;)
Now that direct mode sets core.bare=true, git's normal prohibition about
pushing into the currently checked out branch doesn't work.
A simple fix for this would be an update hook which blocks the pushes..
but git hooks must be executable, and git-annex needs to be usable on eg,
FAT, which lacks x bits.
Instead, enabling direct mode switches the branch (eg master) to a special
purpose branch (eg annex/direct/master). This branch is not pushed when
syncing; instead any changes that git annex sync commits get written to
master, and it's pushed (along with synced/master) to the remote.
Note that initialization has been changed to always call setDirect,
even if it's just setDirect False for indirect mode. This is needed because
if the user has just cloned a direct mode repo, that nothing has synced
with before, it may have no master branch, and only a annex/direct/master.
Resulting in that branch being checked out locally too. Calling setDirect False
for indirect mode moves back out of this branch, to a new master branch,
and ensures that a manual "git push" doesn't push changes directly to
the annex/direct/master of the remote. (It's possible that the user
makes a commit w/o using git-annex and pushes it, but nothing I can do
about that really.)
This commit was sponsored by Jonathan Harrington.
Pass subcommand as a regular param, which allows passing git parameters
like -c before it. This was already done in the pipeing set of functions,
but not the command running set.
Making the pre-commit hook look at git diff-index to find changed direct
mode files and update the mappings works pretty well.
One case where it does not work is when a file is git annex added, and then
git rmed, and then this is committed. That's a no-op commit, so the hook
probably doesn't even run, and it certianly never notices that the file
was deleted, so the mapping will still have the original filename in it.
For this and other reasons, it's important that the mappings still be
treated as possibly inconsistent.
Also, the assistant now allows the pre-commit hook to run when in direct
mode, so the mappings also get updated there.
Nearly everything that's reading from git is operating on a small
amount of output and has been switched to use that. Only pipeNullSplit
stuff continues using the lazy version that yields zombies.
Don't expose these as branches in refs/heads/. Instead hide them away in
refs/synced/ where only show-ref will find them.
Make unused only look at branches and tags, not these other things,
so it won't care if some stale sync ref used to use a file.
This means they don't need to be deleted, which could have
led to an incoming sync being missed.
Continue using the key name as bup ref name, to preserve backwards
compatability, unless it is an illegal git ref. In that case, use a sha256
of the key name instead.
Under ghc 7.4, this seems to be able to handle all filename encodings
again. Including filename encodings that do not match the LANG setting.
I think this will not work with earlier versions of ghc, it uses some ghc
internals.
Turns out that ghc 7.4 has a special filesystem encoding that it uses when
reading/writing filenames (as FilePaths). This encoding is documented
to allow "arbitrary undecodable bytes to be round-tripped through it".
So, to get FilePaths from eg, git ls-files, set the Handle that is reading
from git to use this encoding. Then things basically just work.
However, I have not found a way to make Text read using this encoding.
Text really does assume unicode. So I had to switch back to using String
when reading/writing data to git. Which is a pity, because it's some
percent slower, but at least it works.
Note that stdout and stderr also have to be set to this encoding, or
printing out filenames that contain undecodable bytes causes a crash.
IMHO this is a misfeature in ghc, that the user can pass you a filename,
which you can readFile, etc, but that default, putStr of filename may
cause a crash!
Git.CheckAttr gave me special trouble, because the filenames I got back
from git, after feeding them in, had further encoding breakage.
Rather than try to deal with that, I just zip up the input filenames
with the attributes. Which must be returned in the same order queried
for this to work.
Also of note is an apparent GHC bug I worked around in Git.CheckAttr. It
used to forkProcess and feed git from the child process. Unfortunatly,
after this forkProcess, accessing the `files` variable from the parent
returns []. Not the value that was passed into the function. This screams
of a bad bug, that's clobbering a variable, but for now I just avoid
forkProcess there to work around it. That forkProcess was itself only added
because of a ghc bug, #624389. I've confirmed that the test case for that
bug doesn't reproduce it with ghc 7.4. So that's ok, except for the new ghc
bug I have not isolated and reported. Why does this simple bit of code
magnet the ghc bugs? :)
Also, the symlink touching code is currently broken, when used on utf-8
filenames in a non-utf-8 locale, or probably on any filename containing
undecodable bytes, and I temporarily commented it out.
The describe function was only intended to generate a human-visible
description of a branch, but taking the base of a branch is a useful
operation to be able to do no matter the human-visible representation.
Converting a branch like refs/heads/master to refs/heads/origin/master
is also a useful operation, and under can do that.
