The webapp modules cannot build with the assistant disabled, so make the
webapp be under the assistant build flag.
Sponsored-by: Jarkko Kniivilä on Patreon
--backend is no longer a global option, and is only accepted by commands
that actually need it.
Three commands that used to support backend but don't any longer are
watch, webapp, and assistant. It would be possible to make them support it,
but I doubt anyone used the option with these. And in the case of webapp
and assistant, the option was handled inconsistently, only taking affect
when the command is run with an existing git-annex repo, not when it
creates a new one.
Also, renamed GlobalOption etc to AnnexOption. Because there are many
options of this type that are not actually global (any more) and get
added to commands that need them.
Sponsored-by: Kevin Mueller on Patreon
Improve handling of parallelization with -J when copying content from/to a
git remote that is a local path.
Sponsored-by: Nicholas Golder-Manning on Patreon
At this point I've checked all AnnexState values and these were all that
remained that could move.
Pity that Annex.repo can't move, but it gets modified sometimes..
A couple of AnnexState values are set by options and could be AnnexRead,
but happen to use Annex when being set.
Sponsored-by: Max Thoursie on Patreon
When adding a small file, it does not get locked down, so can be modified
after git-annex checks that it's small. The use of queued git add made the
race window nice and wide too.
Fixed by checking if the file has changed, and by not using git add.
Instead, have to recapitulate git add's handling of things like symlinks
and executable files.
Sponsored-by: Jochen Bartl on Patreon
The remaining callers all did not rely on it checking gitignore, so were
easy to convert.
They were susceptable to the same overwrite race as add and fix,
although less likely to have it and a narrower window than add's race.
Command.Rekey in passing got an unncessary call to removeFile deleted.
addSymlink handles deleting any existing worktree file.
This is not a complete fix for all such races, only the one where a
large file gets changed while adding and gets added to git rather than
to the annex.
addLink needs to go away, any caller of it is probably subject to the
same kind of race. (Also, addLink itself fails to check gitignore when
symlinks are not supported.)
ingestAdd no longer checks gitignore. (It didn't check it consistently
before either, since there were cases where it did not run git add!)
When git-annex import calls it, it's already checked gitignore itself
earlier. When git-annex add calls it, it's usually on files found
by withFilesNotInGit, which handles checking ignores.
There was one other case, when git-annex add --batch calls it. In that
case, old git-annex behaved rather badly, it would seem to add the file,
but git add would later fail, leaving the file as an unstaged annex symlink.
That behavior has also been fixed.
Sponsored-by: Brett Eisenberg on Patreon
move: Improve resuming a move that succeeded in transferring the content,
but where dropping failed due to eg a network problem, in cases where
numcopies checks prevented the resumed move from dropping the object from
the source repository.
This was earlier done for moves that got interrupted during the drop stage.
Sponsored-by: Svenne Krap on Patreon
Fix retrival of an empty file that is stored in a special remote with
chunking enabled.
The speculative chunk stuff caused a reversion by adding an empty list for
the empty file. Which is just wrong; the empty file is still stored on the
remote, and should be retrieved like any other file. It uses 1 chunk, so
`max 1` is the simple fix.
Sponsored-by: Noam Kremen on Patreon
rather than matching path of an existing remote to find the uuid.
The main benefit of this is that locations not using ssh:// will work
now, including both paths and host:/path
The other benefit is that it's a simpler interface, no need to have an
existing remote with the same url and some other name. Although that
will still work of course.
This does rely on tryGitConfigRead working when given a Git.Repo that is
not a remote. Luckily, it works fine that way.
Also, tryGitConfigRead will auto-init a local repo that has a git-annex
branch. I did not enable auto-init of ssh repos though.
The uuid discovery actually happens twice; initremote discovers it,
and uses it to store the special remote config, but does not set it in the
git remote it creates. So the next run of git-annex does uuid discovery
again, and caches it that time. This could be improved for a tiny
speedup, but I didn't want to complicate things for that in this
commit.
Sponsored-by: Dartmouth College's DANDI project
to track down a blocked indefinitely on MVar that seems to occur after
sqlite throws ErrorBusy but that I have not been able to reproduce when
I made commits synthetically throw ErrorBusy.
Sponsored-by: Dartmouth College's Datalad project
Use cases include using git-annex init --no-autoenable and then going back
and enabling the special remotes that have autoenable configured. As well
as just querying to remember which ones have it enabled.
It lists all special remotes that have autoenable=yes whether currently
enabled or not. And it can be used with --json.
I pondered making this "git-annex info autoenable", but that seemed wrong
because then if the use has a directory named "autoenable", it's unclear
what they are asking for. (Although "git-annex info remote" may be
similarly unclear.) Making it an option does mean that it can't be provided
via --batch though.
Sponsored-by: Dartmouth College's Datalad project
Someone may disagree with what repositories are set to autoenable and
it's good to have local overrides.
See https://github.com/datalad/datalad/issues/6634
Sponsored-by: Dartmouth College's Datalad project
test: When limiting tests to run with -p, work around tasty limitation by
automatically including dependent tests.
This fixes a reversion because it didn't used to use dependencies and
forced tasty to run the init tests first. That changed when parallelizing
the test suite.
It will sometimes do a little more work than strictly required,
because it adds init tests deps when limited to eg quickcheck tests,
which don't depend on them. But this only adds a few seconds work.
Sponsored-by: Dartmouth College's Datalad project
This reverts windows-specific parts of 5a98f2d509
There were no code paths in common between windows and unix, so this
will return Windows to the old behavior.
The problem that the commit talks about has to do with multiple different
locations where git-annex can store annex object files, but that is not
too relevant to Windows anyway, because on windows the filesystem is always
treated as criplled and/or symlinks are not supported, so it will only
use one object location. It would need to be using a repo populated
in another OS to have the other object location in use probably.
Then a drop and get could possibly lead to a dangling lock file.
And, I was not able to actually reproduce that situation happening
before making that commit, even when I forced a race. So making these
changes on windows was just begging trouble..
I suspect that the change that caused the reversion is in
Annex/Content/Presence.hs. It checks if the content file exists,
and then called modifyContentDirWhenExists, which seems like it would
not fail, but if something deleted the content file at that point,
that call would fail. Which would result in an exception being thrown,
which should not normally happen from a call to inAnnexSafe. That was a
windows-specific change; the unix side did not have an equivilant
change.
Sponsored-by: Dartmouth College's Datalad project
setEnv is not thread safe and could cause a getEnv by another thread to
segfault, or perhaps other had behavior. This is particularly a problem
when using tasty, because tasty runs the test in a thread, and a getEnv
in another thread.
The use of top-level TMVars is ugly, but ok because only 1 test actually
runs at a time per process. Because it has to chdir into the test repo.
The setEnv that remains happens before tasty is running.
Sponsored-by: Dartmouth College's Datalad project
setEnv is not thread safe and could cause a getEnv by another thread to
segfault, or perhaps other had behavior.
Sponsored-by: Dartmouth College's Datalad project
The purpose of this is to fix situations where the annex object file is
stored in a directory structure other than where annex symlinks point to.
But it will also move object files from the hashdirmixed back to
hashdirlower if the repo configuration makes that the normal location.
It would have been more work to avoid that than to let it do it.
Sponsored-by: Dartmouth College's Datalad project
If the content directory does not exist, then it does not make sense to
lock the content file, as it also does not exist, and so it's ok for the
lock operation to fail.
This avoids potential races where the content file exists but is then
deleted/renamed, while another process sees that it exists and goes to
lock it, resulting in a dangling lock file in an otherwise empty object
directory.
Also renamed modifyContent to modifyContentDir since it is not only
necessarily used for modifying content files, but also other files in
the content directory.
Sponsored-by: Dartmouth College's Datalad project
Added support for "megabit" and related bandwidth units in
annex.stalldetection and everywhere else that git-annex parses data units.
Note that the short form is "Mbit" not "Mb" because that differs from "MB"
only in case, and git-annex parses units case-insensitively. It would be
horrible if two different versions of git-annex parsed the same value
differently, so I don't think "Mb" can be supported.
See comment for bonus sad story from my childhood.
Sponsored-by: Nicholas Golder-Manning
Avoid treating refs/annex/last-index or other refs that are not commit
objects as evidence of repository corruption.
The repair code checks to find bad refs by trying to run `git log` on
them, and assumes that no output means something is broken. But git log
on a tree object is empty.
This was worth fixing generally, not as a special case, since it's certainly
possible that other things store tree or other objects in refs.
Sponsored-by: Max Thoursie on Patreon
