Freeze first sets the file perms, and then runs
freezecontent-command. Thaw runs thawcontent-command before
restoring file permissions. This is in case the freeze command
prevents changing file perms, as eg setting a file immutable does.
Also, changing file perms tends to mess up previously set ACLs.
git-annex init's probe for crippled filesystem uses them, so if file perms
don't work, but freezecontent-command manages to prevent write to a file,
it won't treat the filesystem as crippled.
When the the filesystem has been probed as crippled, the hooks are not
used, because there seems to be no point then; git-annex won't be relying
on locking annex objects down. Also, this avoids them being run when the
file perms have not been changed, in case they somehow rely on
git-annex's setting of the file perms in order to work.
Sponsored-by: Dartmouth College's Datalad project
Remove closed bugs and todos that were last edited or commented before 2020.
Except for ones tagged projects/* since projects like datalad want to keep
around records of old deleted bugs longer.
Command line used:
for f in $(grep -l '|done\]\]' -- ./*.mdwn); do if ! grep -q "projects/" "$f"; then d="$(echo "$f" | sed 's/.mdwn$//')"; if [ -z "$(git log --since=01-01-2020 --pretty=oneline -- "$f")" -a -z "$(git log --since=01-01-2020 --pretty=oneline -- "$d")" ]; then git rm -- "./$f" ; git rm -rf "./$d"; fi; fi; done
for f in $(grep -l '\[\[done\]\]' -- ./*.mdwn); do if ! grep -q "projects/" "$f"; then d="$(echo "$f" | sed 's/.mdwn$//')"; if [ -z "$(git log --since=01-01-2020 --pretty=oneline -- "$f")" -a -z "$(git log --since=01-01-2020 --pretty=oneline -- "$d")" ]; then git rm -- "./$f" ; git rm -rf "./$d"; fi; fi; done
Eg, before with a .gitattributes like:
*.2 annex.numcopies=2
*.1 annex.numcopies=1
And foo.1 and foo.2 having the same content and key, git-annex drop foo.1 foo.2
would succeed, leaving just 1 copy, despite foo.2 needing 2 copies.
It dropped foo.1 first and then skipped foo.2 since its content was gone.
Now that the keys database includes locked files, this longstanding wart
can be fixed.
Sponsored-by: Noam Kremen on Patreon
Most of this is just refactoring. But, handleDropsFrom
did not verify that associated files from the keys db were still
accurate, and has now been fixed to.
A minor improvement to this would be to avoid calling catKeyFile
twice on the same file, when getting the numcopies and mincopies value,
in the common case where the same file has the highest value for both.
But, it avoids checking every associated file, so it will scale well to
lots of dups already.
Sponsored-by: Kevin Mueller on Patreon
When the log has an activity that is not known, eg added by a future
version of git-annex, it used to be treated as no activity at all,
which would make git-annex expire think it should expire the repository,
despite it having some kind of recent activity.
Hopefully there will be no reason to add a new activity until enough
time has passed that this commit is in use everywhere.
Sponsored-by: Jake Vosloo on Patreon
This will mostly just avoid a DB lookup, so things get marginally
faster. But in cases where there are many files using the same key, it
can be a more significant speedup.
Added overhead is one MVar lookup per call, which should be small
enough, since this happens after transferring or ingesting a file,
which is always a lot more work than that. It would be nice, though,
to move getGitConfig to AnnexRead, which there is an open todo about.
Clear visible progress bar first.
Removed showSideActionAfter because it can't be used in reconcileStaged
(import loop). Instead, it counts the number of files it
processes and displays it after it's seen a sufficient to know it's
taking a while.
Sponsored-by: Dartmouth College's Datalad project
This makes git checkout and git merge hooks do the work to catch up with
changes that they made to the tree. Rather than doing it at some later
point when the user is not thinking about that past operation.
Sponsored-by: Dartmouth College's Datalad project
reconcileStaged was doing a redundant scan to scannAnnexedFiles.
It would probably make sense to move the body of scannAnnexedFiles
into reconcileStaged, the separation does not really serve any purpose.
Sponsored-by: Dartmouth College's Datalad project
Commit 428c91606b made it need to do more
work in situations like switching between very different branches.
Compare with seekFilteredKeys which has a similar optimisation. Might be
possible to factor out the common part from these?
Sponsored-by: Dartmouth College's Datalad project
When this option is not used, there should be effectively no added
overhead, thanks to the optimisation in
b3cd0cc6ba.
When an action fails on a file, the size of the file still counts toward
the size limit. This was necessary to support concurrency, but also
generally seems like the right choice.
Most commands that operate on annexed files support the option.
export and import do not, and I don't know if it would make sense for
export to.. Why would you want an incomplete export? sync doesn't, and
while it would be easy to make it support it for transferring files,
it's not clear if dropping files should also take the size limit into
account. Commands like add that don't operate on annexed files don't
support the option either.
Exiting 101 not yet implemented.
Sponsored-by: Denis Dzyubenko on Patreon
Avoids users thinking this scan is a big deal, when it's not in the
majority of repos.
showSideActionAfter has some ugly caveats, since it has to display in
the background of another action. I could not see a better way to do it
and it works fine in this particular case. It also doesn't really belong
in Annex.Concurrent, but cannot go in Messages due to an import loop.
Sponsored-by: Dartmouth College's Datalad project
There seems to be no reason to check the time here. I think it was
inherited from code in Database.Fsck, which does have a reason to commit
every few minutes. Removing that syscall speeds up a git-annex init
in a repo with 100000 annexed files by about 3 seconds.
Sponsored-by: Dartmouth College's Datalad project
Streaming through git this way speeds it up by around 25%. This is
similar to the optimisations of seeking annexed files.
Sponsored-by: Dartmouth College's Datalad project
The normalisation of filenames turns out to be the tricky part here,
because the associated files coming out of the keys db may look like
"./foo/bar" or "../bar". For the former to match a glob like "foo/*",
it needs to be normalised.
Note that, on windows, normalise "./foo/bar" = "foo\\bar"
which a glob like "foo/*" won't match. So the glob is matched a second
time, on the toInternalGitPath, so allowing the user to provide a glob
with the slashes in either direction. However, this still won't support
some wacky edge cases like the user providing a glob of "foo/bar\\*"
Sponsored-by: Dartmouth College's Datalad project
Before only unlocked files were included.
The initial scan now scans for locked as well as unlocked files. This
does mean it gets a little bit slower, although I optimised it as well
as I think it can be.
reconcileStaged changed to diff from the current index to the tree of
the previous index. This lets it handle deletions as well, removing
associated files for both locked and unlocked files, which did not
always happen before.
On upgrade, there will be no recorded previous tree, so it will diff
from the empty tree to current index, and so will fully populate the
associated files, as well as removing any stale associated files
that were present due to them not being removed before.
reconcileStaged now does a bit more work. Most of the time, this will
just be due to running more often, after some change is made to the
index, and since there will be few changes since the last time, it will
not be a noticable overhead. What may turn out to be a noticable
slowdown is after changing to a branch, it has to go through the diff
from the previous index to the new one, and if there are lots of
changes, that could take a long time. Also, after adding a lot of files,
or deleting a lot of files, or moving a large subdirectory, etc.
Command.Lock used removeAssociatedFile, but now that's wrong because a
newly locked file still needs to have its associated file tracked.
Command.Rekey used removeAssociatedFile when the file was unlocked.
It could remove it also when it's locked, but it is not really
necessary, because it changes the index, and so the next time git-annex
run and accesses the keys db, reconcileStaged will run and update it.
There are probably several other places that use addAssociatedFile and
don't need to any more for similar reasons. But there's no harm in
keeping them, and it probably is a good idea to, if only to support
mixing this with older versions of git-annex.
However, mixing this and older versions does risk reconcileStaged not
running, if the older version already ran it on a given index state. So
it's not a good idea to mix versions. This problem could be dealt with
by changing the name of the gitAnnexKeysDbIndexCache, but that would
leave the old file dangling, or it would need to keep trying to remove
it.
Sometimes users would get confused because an option they were looking
for was not mentioned on a subcommand's man page, and they had not
noticed that the main git-annex man page had a list of common options.
This change lets each subcommand mention the common options, similarly
to how the matching options are handled.
This commit was sponsored by Svenne Krap on Patreon.
The slightly unusual parsing in Types.GitConfig avoids the need to look
at the remote list to get configs of remotes. annexPrivateRepos combines
all the configs, and will only be calculated once, so it's nice and
fast.
privateUUIDsKnown and regardingPrivateUUID now need to read from the
annex mvar, so are not entirely free. But that overhead can be optimised
away, as seen in getJournalFileStale. The other call sites didn't seem
worth optimising to save a single MVar access. The feature should have
impreceptable speed overhead when not being used.
* Fix bug that could make git-annex importfeed not see recently recorded
state when configured with annex.alwayscommit=false.
* importfeed: Made "checking known urls" phase run 12 times faster.
The massive speedup is because it no longer queries for metadata
accompanying each url. Instead it processes the whole git-annex branch and
checks all metadata files for feed item ids, and uses any it finds.
This could result in a behavior change, in an unlikely situation: If a feed
id is recorded in a key's metadata, but the url gets removed, the old code
would not see that item id and would re-download it if it finds an url for
it in a feed, while the new code will see the item id. I don't think
the old behavior was intentional, and it may be that the new behavior is
better. Not gonna worry about this.
This only partly fixes importfeed to see journalled files, since it
separately cats metadata directly from the branch. Held off on a
changelog for a bug fix until that's dealt with.
Fix bug caused by recent optimisations that could make git-annex not see
recently recorded status information when configured with
annex.alwayscommit=false.
This does mean that --all can end up processing the same key more than once,
but before the optimisations that introduced this bug, it used to also behave
that way. So I didn't try to fix that; it's an edge case and anyway git-annex
behaves well when run on the same key repeatedly.
I am not too happy with the use of a MVar to buffer the list of files in the
journal. I guess it doesn't defeat lazy streaming of the list, if that
list is actually generated lazily, and anyway the size of the journal is
normally capped and small, so if configs are changed to make it huge and
this code path fire, git-annex using enough memory to buffer it all is not a
large problem.
This adds a separate journal, which does not currently get committed to
an index, but is planned to be committed to .git/annex/index-private.
Changes that are regarding a UUID that is private will get written to
this journal, and so will not be published into the git-annex branch.
All log writing should have been made to indicate the UUID it's
regarding, though I've not verified this yet.
Currently, no UUIDs are treated as private yet, a way to configure that
is needed.
The implementation is careful to not add any additional IO work when
privateUUIDsKnown is False. It will skip looking at the private journal
at all. So this should be free, or nearly so, unless the feature is
used. When it is used, all branch reads will be about twice as expensive.
It is very lucky -- or very prudent design -- that Annex.Branch.change
and maybeChange are the only ways to change a file on the branch,
and Annex.Branch.set is only internal use. That let Annex.Branch.get
always yield any private information that has been recorded, without
the risk that Annex.Branch.set might be called, with a non-private UUID,
and end up leaking the private information into the git-annex branch.
And, this relies on the way git-annex union merges the git-annex branch.
When reading a file, there can be a public and a private version, and
they are just concacenated together. That will be handled the same as if
there were two diverged git-annex branches that got union merged.
