importfeed bug fix: When -J was used with multiple feeds, some feeds did
not get their items downloaded.
In my case, I had added a feed to the end of the list, and no items from it
were ever downloaded.
Sponsored-by: Leon Schuermann on Patreon
(And allow it to be used in the --template although that seems unlikely to
be very useful.)
My use case for this is that one of the podcast feeds I subscribe to is
sometimes leaking episodes of some other podcast. The other podcast is also
very close to spam, so this may be a form of intentional spamming. I have
not been able to catch the podcast feed containing those episodes, so I
don't know which one is at fault. So putting this in the metadata will let
me eventually catch it.
The input field is consistently the url of the feed, which makes sense
as that is the user input, but to differentiate multiple urls downloaded
from a feed when using --json-progress -J, need the url that is being
downloaded too.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
Both -J and --json needed importfeed to be refactored to use commandAction.
That was difficult, because of the interrelated nature of downloading feeds
and then downloading files from feeds, both of which needed to use
commandAction. And then checking for problems in feeds has to come after
these actions, which may be run as background jobs.
As for --json support, it's most of the way there, but still has some
warts, so I didn't enable jsonOptions yet. The warts include:
- An initial empty json record is displayed by getCache.
- Input is not populated, should be feed url
- feedProblem at end will not be captured by --json-error-messages
(see FIXME)
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
This does, as a side effect, make long notes in json output not
be indented. The indentation is only needed to offset them
underneath the display of the file they apply to, so that's ok.
Sponsored-by: Brock Spratlen on Patreon
Converted warning and similar to use StringContainingQuotedPath. Most
warnings are static strings, some do refer to filepaths that need to be
quoted, and others don't need quoting.
Note that, since quote filters out control characters of even
UnquotedString, this makes all warnings safe, even when an attacker
sneaks in a control character in some other way.
When json is being output, no quoting is done, since json gets its own
quoting.
This does, as a side effect, make warning messages in json output not
be indented. The indentation is only needed to offset warning messages
underneath the display of the file they apply to, so that's ok.
Sponsored-by: Brett Eisenberg on Patreon
giveup changed to filter out control characters. (It is too low level to
make it use StringContainingQuotedPath.)
error still does not, but it should only be used for internal errors,
where the message is not attacker-controlled.
Changed a lot of existing error to giveup when it is not strictly an
internal error.
Of course, other exceptions can still be thrown, either by code in
git-annex, or a library, that include some attacker-controlled value.
This does not guard against those.
Sponsored-by: Noam Kremen on Patreon
When importing a bunch of feeds, this makes it more clear what it's working
on. Also, I sometimes want to delete a particular feed from a list of feeds
but don't know which url belongs to the feed, and this solves that.
Control characters are filtered out just to protect against some feed
putting escape character stuff in the feed, which could be a
security problem. (Control characters also get filtered out of
importfeed filenames.)
Sponsored-by: Luke Shumaker on Patreon
Works around this bug in unix-compat:
https://github.com/jacobstanley/unix-compat/issues/56
getFileStatus and other FilePath using functions in unix-compat do not do
UNC conversion on Windows.
Made Utility.RawFilePath use convertToWindowsNativeNamespace to do the
necessary conversion on windows to support long filenames.
Audited all imports of System.PosixCompat.Files to make sure that no
functions that operate on FilePath were imported from it. Instead, use
the equvilants from Utility.RawFilePath. In particular the
re-export of that module in Common had to be removed, which led to lots
of other changes throughout the code.
The changes to Build.Configure, Build.DesktopFile, and Build.TestConfig
make Utility.Directory not be needed to build setup. And so let it use
Utility.RawFilePath, which depends on unix, which cannot be in
setup-depends.
Sponsored-by: Dartmouth College's Datalad project
This makes --all error out in that situation. Which is better than
ignoring information from the branches.
To really handle the branches right, overBranchFileContents would need
to both query all the branches and union merge file contents
(or perhaps not provide any file content), as well as diffing between
branches to find files that are only present in the unmerged branches.
And also, it would need to handle transitions..
Sponsored-by: Dartmouth College's Datalad project
As mentioned in commit 2bd778a46e, there
was mojibake when LANG=C.
Looking at parseFeedFromFile, it is very particular to read the file as
unicode. parseFeedString looks like it will accept any old String,
but a String that was read using the filesystem encoding will not in
fact have the right encoding.
I think this is a bug in the feed library and will file one.
Sponsored-by: Svenne Krap on Patreon
See comment for analysis.
At first I thought I'd need to convert all T.unpack in git-annex, but
luckily not -- so long as the Text is read from a file, the filesystem
encoding is applied and T.unpack is fine. It's only when using Feed
that the filesystem encoding is not applied.
While this fixes the crash, it does result in some mojibake, eg:
itemid=http://www.manager-tools.com/2014/01/choosing-a-company-work-chapter-7-���-questions/
Have not tracked that down, but it must be unrelated, because
I've verified that it roundtrips when using encodeUf8:
joey@darkstar:~/src/git-annex>LANG=C ghci Utility/FileSystemEncoding.hs
ghci> useFileSystemEncoding
ghci> Just f <- Text.Feed.Import.parseFeedFromFile "/home/joey/tmp/career_tools_podcasts.xml"
ghci> Just (_, x) = Text.Feed.Query.getItemId (Text.Feed.Query.feedItems f !! 0)
ghci> decodeBS (Data.Text.Encoding.encodeUtf8 x)
"http://www.manager-tools.com/2014/01/choosing-a-company-work-chapter-7-\56546\56448\56467-questions/"
ghci> writeFile "foo" $ decodeBS (Data.Text.Encoding.encodeUtf8 x)
Writes a file containing the ENDASH character.
Sponsored-by: Jochen Bartl on Patreon
Except when configuration makes curl be used. It did not seem worth
trying to tail the file when curl is downloading.
But when an interrupted download is resumed, it does not read the whole
existing file to hash it. Same reason discussed in
commit 7eb3742e4b76d1d7a487c2c53bf25cda4ee5df43; that could take a long
time with no progress being displayed. And also there's an open http
request, which needs to be consumed; taking a long time to hash the file
might cause it to time out.
Also in passing implemented it for git and external special remotes when
downloading from the web. Several others like S3 are within striking
distance now as well.
Sponsored-by: Dartmouth College's DANDI project
Forces eg, download with youtube-dl without falling back to raw download.
Since youtube-dl failing due to an url not being supported is difficult to
distinguish from it failing due to being blocked in some way, this can be
useful to avoid the fallback of git-annex downloading the raw web page and
adding that.
Since --raw also prevents using special remotes, --no-raw also
allows special remote downloads. Although it's always possible that some
special remote may claim an url and fall back to raw download of the
content, which --no-raw cannot prevent.
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
* Fix bug that could make git-annex importfeed not see recently recorded
state when configured with annex.alwayscommit=false.
* importfeed: Made "checking known urls" phase run 12 times faster.
The massive speedup is because it no longer queries for metadata
accompanying each url. Instead it processes the whole git-annex branch and
checks all metadata files for feed item ids, and uses any it finds.
This could result in a behavior change, in an unlikely situation: If a feed
id is recorded in a key's metadata, but the url gets removed, the old code
would not see that item id and would re-download it if it finds an url for
it in a feed, while the new code will see the item id. I don't think
the old behavior was intentional, and it may be that the new behavior is
better. Not gonna worry about this.
This uses a DebugSelector, rather than debug levels, which will allow
for a later option like --debug-from=Process to only
see debuging about running processes.
The module name that contains the thing being debugged is used as the
DebugSelector (in most cases; does not need to be a hard and fast rule).
Debug calls were changed to add that. hslogger did not display
that first parameter to debugM, but the DebugSelector does get
displayed.
Also fastDebug will allow doing debugging in places that are used in
tight loops, with the DebugSelector coming from the Annex Reader
essentially for free. Not done yet.
This is common in some feeds, which might mix some items with enclosures,
with others that link to posts or whatever. Before this, it would try to
use youtube-dl and fail, or if youtube-dl was not allowed, it would
incorrectly complain that an url was supported by youtube-dl.
Which lets progress be displayed when doing concurrent downloads.
Amoung other things, like --json-progress etc.
The youtube-dl output is no longer displayed, except for any errors.
This commit was sponsored by Denis Dzyubenko on Patreon.
Ensure that checkCanAdd is used everywhere a file is added to git,
so git add is run with -f, presumably avoiding the work it would usually
do to check ignores.
add, addurl, importfeed, import: Added --no-check-gitignore option
for finer grained control than using --force.
(--force is used for too many different things, and at least one
of these also uses it for something else. I would like to reduce
--force's footprint until it only forces drops or a few other data
losses. For now, --force still disables checking ignores too.)
addunused: Don't check .gitignores when adding files. This is a behavior
change, but I justify it by analogy with git add of a gitignored file
adding it, asking to add all unused files back should add them all back,
not skip some. The old behavior was surprising.
In Command.Lock and Command.ReKey, CheckGitIgnore False does not change
behavior, it only makes explicit what is done. Since these commands are run
on annexed files, the file is already checked into git, so git add won't
check ignores.
The use case of this field is mostly to support -J combined with --json.
When that is implemented, a user will be able to look at the field to
determine which of the requests they have sent it corresponds to.
The field typically has a single value in its list, but in some cases
mutliple values (eg 2 command-line params) are combined together and the
list will have more.
Note that json parsing was already non-strict, so old git-annex metadata
--json --batch can be fed json produced by the new git-annex and will
not stumble over the new field.
sanitizeFilePath was changed to sanitize leading '.', but ImportFeed was
running it on parts of the template. So eg the leading '.' in the extension
got sanitized.
Note the added case for sanitizeLeadingFilePathCharacter ('/':_)
-- this was added because, if the template is title/episode and the title
is not set, it would expand to "/episode". So this is another potential
security fix.
* addurl --preserve-filename: New option, uses server-provided filename
without any sanitization, but with some security checking.
Not yet implemented for remotes other than the web.
* addurl, importfeed: Avoid adding filenames with leading '.', instead
it will be replaced with '_'.
This might be considered a security fix, but a CVE seems unwattanted.
It was possible for addurl to create a dotfile, which could change
behavior of some program. It was also possible for a web server to say
the file name was ".git" or "foo/.git". That would not overrwrite the
.git directory, but would cause addurl to fail; of course git won't
add "foo/.git".
sanitizeFilePath is too opinionated to remain in Utility, so moved it.
The changes to mkSafeFilePath are because it used sanitizeFilePath.
In particular:
isDrive will never succeed, because "c:" gets munged to "c_"
".." gets sanitized now
".git" gets sanitized now
It will never be null, because sanitizeFilePath keeps the length
the same, and splitDirectories never returns a null path.
Also, on the off chance a web server suggests a filename of "",
ignore that, rather than trying to save to such a filename, which would
fail in some way.
addurl: When run with --fast on an url that
annex.security.allowed-ip-addresses prevents accessing, display a more
useful message.
(Also importfeed --fast potentially.)
* annex.addunlocked can be set to an expression with the same format used by
annex.largefiles, in case you want to default to unlocking some files but
not others.
* annex.addunlocked can be configured by git-annex config.
Added a git-annex-matching-expression man page, broken out from
tips/largefiles.
A tricky consequence of this is that git-annex add --relaxed
honors annex.addunlocked, but an expression might want to know the size
or content of an url, which it's not going to download. I decided it was
better not to fail, and just dummy up some plausible data in that case.
Performance impact should be negligible. The global config is already
loaded for annex.largefiles. The expression only has to be parsed once,
and in the simple true/false case, it should not do any additional work
matching it.
Convert Utility.Url to return Either String so the error message can be
displated in the annex monad and so captured.
(When curl is used, its errors are still not caught.)
Drop support for building with ghc older than 8.4.4, and with older
versions of serveral haskell libraries than will be included in Debian 10.
The only remaining version ifdefs in the entire code base are now a couple
for aws!
This commit should only be merged after the Debian 10 release.
And perhaps it will need to wait longer than that; it would make
backporting new versions of git-annex to Debian 9 (stretch) which
has been actively happening as recently as this year.
This commit was sponsored by Ilya Shlyakhter.
