Leveraged the existing verification code by making it also check the
retrievalSecurityPolicy.
Also, prevented getViaTmp from running the download action at all when the
retrievalSecurityPolicy is going to prevent verifying and so storing it.
Added annex.security.allow-unverified-downloads. A per-remote version
would be nice to have too, but would need more plumbing, so KISS.
(Bill the Cat reference not too over the top I hope. The point is to
make this something the user reads the documentation for before using.)
A few calls to verifyKeyContent and getViaTmp, that don't
involve downloads from remotes, have RetrievalAllKeysSecure hard-coded.
It was also hard-coded for P2P.Annex and Command.RecvKey,
to match the values of the corresponding remotes.
A few things use retrieveKeyFile/retrieveKeyFileCheap without going
through getViaTmp.
* Command.Fsck when downloading content from a remote to verify it.
That content does not get into the annex, so this is ok.
* Command.AddUrl when using a remote to download an url; this is new
content being added, so this is ok.
This commit was sponsored by Fernando Jimenez on Patreon.
They're no worse than http certianly. And, the backport of these
security fixes has to deal with wget, which supports http https and ftp
and has no way to turn off individual schemes, so this will make that
easier.
A local http proxy would bypass the security configuration. So,
the security configuration has to be applied when choosing whether to
use the proxy.
While http rebinding attacks against the dns lookup of the proxy IP
address seem very unlikely, this implementation does prevent them, since
it resolves the IP address once, checks it, and then reconfigures
http-client's proxy using the resolved address.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Security fix!
* git-annex will refuse to download content from http servers on
localhost, or any private IP addresses, to prevent accidental
exposure of internal data. This can be overridden with the
annex.security.allowed-http-addresses setting.
* Since curl's interface does not have a way to prevent it from accessing
localhost or private IP addresses, curl defaults to not being used
for url downloads, even if annex.web-options enabled it before.
Only when annex.security.allowed-http-addresses=all will curl be used.
Since S3 and WebDav use the Manager, the same policies apply to them too.
youtube-dl is not handled yet, and a http proxy configuration can bypass
these checks too. Those cases are still TBD.
This commit was sponsored by Jeff Goeke-Smith on Patreon.
Security fix! Allowing any schemes, particularly file: and
possibly others like scp: allowed file exfiltration by anyone who had
write access to the git repository, since they could add an annexed file
using such an url, or using an url that redirected to such an url,
and wait for the victim to get it into their repository and send them a copy.
* Added annex.security.allowed-url-schemes setting, which defaults
to only allowing http and https URLs. Note especially that file:/
is no longer enabled by default.
* Removed annex.web-download-command, since its interface does not allow
supporting annex.security.allowed-url-schemes across redirects.
If you used this setting, you may want to instead use annex.web-options
to pass options to curl.
With annex.web-download-command removed, nearly all url accesses in
git-annex are made via Utility.Url via http-client or curl. http-client
only supports http and https, so no problem there.
(Disabling one and not the other is not implemented.)
Used curl --proto to limit the allowed url schemes.
Note that this will cause git annex fsck --from web to mark files using
a disallowed url scheme as not being present in the web. That seems
acceptable; fsck --from web also does that when a web server is not available.
youtube-dl already disabled file: itself (probably for similar
reasons). The scheme check was also added to youtube-dl urls for
completeness, although that check won't catch any redirects it might
follow. But youtube-dl goes off and does its own thing with other
protocols anyway, so that's fine.
Special remotes that support other domain-specific url schemes are not
affected by this change. In the bittorrent remote, aria2c can still
download magnet: links. The download of the .torrent file is
otherwise now limited by annex.security.allowed-url-schemes.
This does not address any external special remotes that might download
an url themselves. Current thinking is all external special remotes will
need to be audited for this problem, although many of them will use
http libraries that only support http and not curl's menagarie.
The related problem of accessing private localhost and LAN urls is not
addressed by this commit.
This commit was sponsored by Brett Eisenberg on Patreon.
When content has been lost from an export remote and git-annex fsck --from
remote has noticed it's gone, re-running git-annex export or git-annex sync
--content will re-upload it.
Note that normally there's no way to remove a single file from an export.
doc/design/exporting_trees_to_special_remotes.mdwn talks about this
in the section "dropping from exports and copying to exports". But, if
a file is somehow deleted or corrupted on the export, and fsck notices
this, it will update the location log to say it's missing.
So, checking the location log when determining if a file needs to be sent
to the export will let such missing files be added back in. There's
otherwise no way to do so. It does not fall afoul of the races documented
in the abovementioned section, I think.
This commit was sponsored by Ryan Newton on Patreon.
Display error messages that come from git-annex-shell when the p2p protocol
is used, so that diskreserve messages, IO errors, etc from the remote side
are visible again.
Felt like it should perhaps use outputError, so --json-error-messages would
include these, but as an async IO action, it can't, and this would need
MessageState to be converted to a tvar. Anyway, when not using p2pstdio,
that's not done; nor is it done for stderr from external special remotes
or other commands, so punted on the idea for now.
This commit was sponsored by mo on Patreon.
I can't find any documentation of how long it should be. Hard to imagine
it being shorter than 4 characters though, so put that in as a conservative
lower bound.
This commit was sponsored by Nick Piper on Patreon.
External special remotes can now add info to `git annex info $remote`, by
replying to the GETINFO message.
Had to generalize some helpers to allow consuming multiple messages from
the remote.
The code added to Remote/* here is AGPL licensed, thus changed the license
of the files.
This commit was sponsored by Jake Vosloo on Patreon.
In keyUrls, the GitConfig is used only by annexLocations
to support configured Differences. Since such configurations affect all
clones of a repository, the local repo's GitConfig must have the same
information as the remote's GitConfig would have. So, used getGitConfig
to get the local GitConfig, which is cached and so available cheaply.
That actually fixed a bug noone had ever noticed: keyUrls is
used for remotes accessed over http. The full git config of such a
remote is normally not available, so the remoteGitConfig that keyUrls
used would not have the necessary information in it.
In copyFromRemoteCheap', it uses gitAnnexLocation,
which does need the GitConfig of the remote repo itself in order to
check if it's crippled, supports symlinks, etc. So, made the
State include that GitConfig, cached. The use of gitAnnexLocation is
within a (not $ Git.repoIsUrl repo) guard, so it's local, and so
its git config will always be read and available.
(Note that gitAnnexLocation in turn calls annexLocations, so the
Differences config it uses in this case comes from the remote repo's
GitConfig and not from the local repo's GitConfig. As explained above
this is ok since they must have the same value.)
Not very happy with this mess of different GitConfigs not type-safe and
some read only sometimes etc. Very hairy. Think I got it this change
right. Test suite passes..
This commit was sponsored by Ethan Aubin.
Fixed annex-checkuuid implementation, so that remotes configured that way
can be used. This was 100% broken from the first commit of it, oops.
This commit was sponsored by Øyvind Andersen Holm.
Show operating system and repository version list when run outside
a git repo too.
Also made it only display the local repository version when in a git-annex
repo. Before it showed "unknown" when run in a git repo that was not
git-annex initialized. That seemed like confusing behavior.
This commit was sponsored by Jochen Bartl on Patreon.
https://prime.haskell.org/wiki/Libraries/Proposals/SemigroupMonoid
I am not happy with the fragile pile of CPP boilerplate required to support
ghc back to 7.0, which git-annex still targets for both the android build
and the standalone build targeting old linux kernels. It makes me unlikely
to want to use Semigroup more in git-annex, because the benefit of the
abstraction is swamped by the ugliness. I actually considered ripping out
all the Semigroup instances, but some are needed to use
optparse-applicative.
The problem, I think, is they made this transaction on too fast a timeline.
(Although ironically, work on it started in 2015 or earlier!)
In particular, Debian oldstable is not out of security support, and it's
not possible to follow the simpler workarounds documented on the wiki and
have it build on oldstable (because the semigroups package in it is too
old).
I have only tested this build with ghc 8.2.2, not the newer and older
versions that branches of the CPP support. So there could be typoes, we'll
see.
This commit was sponsored by Brock Spratlen on Patreon.
Makes it allow writes, but not deletion of annexed content. Note that
securing pushes to the git repository is left up to the user.
This commit was sponsored by Jack Hill on Patreon.
* migrate: Fix bug in migration between eg SHA256 and SHA256E,
that caused the extension to be included in SHA256 keys,
and omitted from SHA256E keys.
(Bug introduced in version 6.20170214)
* migrate: Check for above bug when migrating from SHA256 to SHA256
(and same for SHA1 to SHA1 etc), and remove the extension that should
not be in the SHA256 key.
* fsck: Detect and warn when keys need an upgrade, either to fix up
from the above migrate bug, or to add missing size information
(a long ago transition), or because of a few other past key related
bugs.
This commit was sponsored by Henrik Riomar on Patreon.
Prevent haskell http-client from decompressing gzip files, so downloads of
such files works the same as it used to with wget and curl.
Explicitly setting accept-encoding to "identity" is probably not needed,
but that's what wget sends (curl does not send the header), and since
http-client is trying to be excessively smart, it seems we need to set
hAcceptEncoding to something to prevent it from inserting its own,
and this seems better than some hack like "".
This commit was sponsored by Ole-Morten Duesund on Patreon.
* move: --force was accidentially enabling two unrelated behaviors
since 6.20180427. The older behavior, which has never been well
documented and seems almost entirely useless, has been removed.
* copy: --force no longer does anything.
This commit was sponsored by Øyvind Andersen Holm.
In some cases, unstaged changes are safe, eg dotfiles in the top which
are not affected by a view. Or non-annexed files in general which would
prevent view branch checkout from proceeding. But in other cases,
particularly unstaged changes to annexed files, entering a view would wipe
out those changes! And so don't allow entering a view with any unstaged
changes.
Staged changes are not safe when entering a view, because the changes get
committed to the view branch, and so the user is unlikely to remember them
when they exit the view, and so will effectively lose them, even if they're
still present in the view branch.
Also, improved the git status parser, although the improvement turned out
to not really be needed.
This commit was sponsored by Eric Drechsel on Patreon.
This fixes a crash when a git submodule has a name starting with a dot.
Such a submodule might contain dotfiles that are intended to be used when
inside the view (since a dot-directory that's not a submodule was already
preserved when entering a view). So, rather than eliminating the submodule
from the view, its git ls-files --stage hash is copied over into the view.
dotfiles/dirs have their git ls-files --stage hashes similarly copied over
to the view. This is more efficient and simpler than the old method,
and also won't break if git ever adds a new type of tree item, like was
done with submodules.
Since the content of dotfiles in the working tree is no longer hashed
when entering a view, when there are unstaged modifications, they are
not included in the view branch. Entering the view branch still works,
but git checkout shows "M .dotfile", and git diff will show the unstaged
changes. This seems like an improvement over the old behavior.
Also made Command.View not delete empty directories that are submodules
when entering a view, while still deleting other empty directories.
This commit was supported by the NSF-funded DataLad project.
* Display error message when http download fails.
There's nothing in the http-client library to nicely format a http
exception, so in some cases it has to fall back to using show on it.
Seems better than just saying "it failed" or only showing the http
status code.
* Avoid forward retry when 0 bytes were received.
forwardRetry was comparing Nothing to Just 0, and so thought there had
been progress made when 0 bytes were received.
This commit was supported by the NSF-funded DataLad project.
The old git-annex Android app is now deprecated in favor of running
git-annex in termux. I suspect all or nearly all of these no longer apply.
This commit was sponsored by Jochen Bartl on Patreon.
runshell: Use proot when running on Android, to work around Android 8's
ill-advised seccomp filtering of system calls, including ones crucial for
reliable thread locking. (This will only work with termux's version of
proot.)
See https://github.com/termux/termux-packages/issues/420#issuecomment-386636938
This commit was sponsored by andrea rota.
Fix regression in last release that crashes when using --all or running
git-annex in a bare repository. May have also affected git-annex unused and
git-annex info.
Reversed the order of the (++) in Annex.Branch.files so --all will stream
lazily still when there are not a bunch of uncommitted journal files.
Added a todo to maybe improve this later.
This commit was sponsored by Trenton Cronholm on Patreon.
This leaves git annex unused --from remote still using loggedKeysFor
and buffering more than ought to be necessary, but I can't see a way to
improve that.
In Annex.Branch.branch, the (++) was killing laziness.
Rewrote so it streams lazily.
filterM also kills laziness, so made loggedKeys use a Unchecked type,
and check if the key is dead in the seek loop.
Note that loggedKeysFor still buffers, so git-annex info <remote> and
git-annex unused --from remote still use more memory than necessary.
Also removed some unused functions from Annex.Journal.
Test case is 24 directories each containing files named 1..10000.
The concat and filterM destroyed what laziness there is in
dirContentsRecursive, making it buffer all the filenames. Memory
use was around 300 mb (possibly growing slightly as it progressed).
After this fix, memory use drops to a constant 59 mb.
Note that dirContentsRecursive still buffers the entire content of a
directory (not subdirectories) so this is still not optimal.
runshell followed by git annex webapp didn't install that stuff, because
GIT_ANNEX_APP_BASE is not set. Running git-annex.linux/git-annex-webapp did
install that stuff, since that script set the env var. I noticed this with
the termux port whose instructions currently go that way.
Seems the right thing to do is to move the env var setting to runshell.
Assistant: Integrate with Termux:Boot, so when it's installed, the
assistant is autostarted on boot.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Added some tweaks to make git-annex work in termux on Android. The regular
arm standalone tarball now works in termux.
I guess the test for "$base/bin/git" is not really necessary, since it
tests for git-annex. Since that gets deleted on android, removed that test.
These are pretty hackish hacks, especially adding it to PATH. The goal is
to make it work well enough out of the box on Android.
This commit was sponsored by Eric Drechsel on Patreon.
Preloaded libraries from the host system may not get along with the bundled
linker.
This was observed by users in termux:
ERROR: ld.so: object '/data/data/com.termux/files/usr/lib/libtermux-exec.so' from LD_PRELOAD cannot be preloaded (wrong ELF class:
ELFCLASS64): ignored.
Bad system call
But it could also affect more usual systems; the preloaded library might rely
on symbols from the host libc that are not available or have the wrong versions
in the bundled libc. Unsetting LD_PRELOAD entirely seems safest.
As long as all code imports Utility.Aeson rather than Data.Aeson,
and no Strings that may contain utf-8 characters are used for eg, object
keys via T.pack, this is guaranteed to fix the problem everywhere that
git-annex generates json.
It's kind of annoying to need to wrap ToJSON with a ToJSON', especially
since every data type that has a ToJSON instance has to be ported over.
However, that only took 50 lines of code, which is worth it to ensure full
coverage. I initially tried an alternative approach of a newtype FileEncoded,
which had to be used everywhere a String was fed into aeson, and chasing
down all the sites would have been far too hard. Did consider creating an
intentionally overlapping instance ToJSON String, and letting ghc fail
to build anything that passed in a String, but am not sure that wouldn't
pollute some library that git-annex depends on that happens to use ToJSON
String internally.
This commit was supported by the NSF-funded DataLad project.
See the big comment at the bottom of Command.Drop for the full details.
(The --safe/--unsafe options were never released.)
This commit was sponsored by Jake Vosloo on Patreon.
move: Added --safe option, which makes move honor numcopies settings.
Also --unsafe enables the default behavior, anticipating that the
default may one day change.
This commit was sponsored by Ethan Aubin.
* For url downloads, git-annex now defaults to using a http library,
rather than wget or curl. But, if annex.web-options is set, it will
use curl. To use the .netrc file, run:
git config annex.web-options --netrc
* git-annex no longer uses wget (and wget is no longer shipped with
git-annex builds).
Note that curl is always run in silent mode, since the new API for
download has a MeterUpdate and doesn't make way for curl progress
output. It might be worth writing a parser for curl's progress output
to update the meter when using it, but I didn't bother with this edge
case for now.
This commit was supported by the NSF-funded DataLad project.
Compare these...
numcopies stats:
numcopies -1: 1986
numcopies +0: 1170
numcopies -2: 769
numcopies +1: 716
numcopies -4: 696
numcopies -3: 485
numcopies -6: 230
numcopies -5: 111
numcopies -7: 91
numcopies -9: 9
numcopies stats:
numcopies +1: 716
numcopies +0: 1170
numcopies -1: 1986
numcopies -2: 769
numcopies -3: 485
numcopies -4: 696
numcopies -5: 111
numcopies -6: 230
numcopies -7: 91
numcopies -9: 9
I feel that the former is a jumbled mess that doesn't tell much overall,
while the second shows pretty clearly that most files are within 1 degree
of the desired number of copies, with some outliers without enough.
Enable HTTP connection reuse across multiple files, when git-annex
uses http-conduit. Before, a new Manager was created each time
Utility.Url used it. Now, a single Manager gets created the first time,
so connections are reused.
Doesn't help when external programs are used for url download,
but does speed up addurl --fast, fsck --from web, etc.
Testing fsck --fast --from web with 3 files, over high-latency
satellite internet, it sped up from 19.37s to 14.96s.
This commit was supported by the NSF-funded DataLad project.
When adding a new version of a file, and annex.genmetadata is enabled,
don't copy the data metadata from the old version of the file, instead use
the mtime of the file. Rationalle being that the user has requested to
generate metadata and so would expect to get the new mtime into metadata.
Also, avoid warning about copying metadata when all the old metadata is
date metadata. Which was rather the harder part.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
I think this used to be the case, but it was accidentially lost way back in
commit 3887432c54. Normally, transfers do not
throw exceptions, so probably forward retrying was rarely done due to that
oversight.
This also affects the new annex.retry etc configuration. If a transfer
fails, without making any progress, eg because the file is not present on
the remote or the remote is not accessible, it will now retry when
configuration calls for it. In some cases such a retry is not desirable,
for example the remote could be accessible and not have a copy of the file
that the local repo thinks it has. I see no way to distinguish such cases
from cases where a retry should really be done. So, it'll be up to the user
to configure it to work for them.
Added annex.retry, annex.retry-delay, and per-remote versions to configure
transfer retries.
This commit was supported by the NSF-funded DataLad project.
git annex testremote passes.
exportree not implemented yet, although the documentation talks about it,
since it will be the main way this remote will be used.
The adb push/pull progress is displayed for now; it would be better
to consume it and use it to update the git-annex progress bar.
This commit was sponsored by andrea rota.
Fix race condition in ssh warmup that caused git-annex to get stuck and
never process some while when run with high levels of concurrency.
So far, I've isolated the problem to processTranscript, which hangs
reading output from ssh in this situation. I don't yet understand why
processTranscript behaves that way.
Since here we don't care about the ssh output, and only want to /dev/null
it, changed to not use processTranscript, avoiding its problem.
This commit was supported by the NSF-funded DataLad project.
Avoid creating transfer info file before transfer lock is created and
locked.
The wrong order for one thing caused transfer info to be overwritten
when a transfer was already in progress.
But worse, it caused checkTransfer to see the transfer info,
and so lock the transfer lock in order to verify the transfer was not in
progress. Which in a concurrent situation, prevented the transferrer
from locking the transfer lock, so it failed with "transfer already in
progress".
Note that the transferinfo command does not lock the transfer lock
before creating the transfer info. But, that's only run after
recvkey is running, and recvkey does lock the transfer lock, so that
seems more or less ok. (Other than being a super complicated legacy mess
that the P2P code has mostly obsoleted now.)
This commit was supported by the NSF-funded DataLad project.
There are a lot of different variants and sizes, I suppose we might as well
export all the common ones.
Bump dep to cryptonite to 0.16, earlier versions lacked BLAKE2 support.
Even android has 0.16 or newer.
On Debian, Blake2bp_512 is buggy, so I have omitted it for now.
http://bugs.debian.org/892855
This commit was sponsored by andrea rota.
When resuming a download and not using a rolling checksummer like rsync,
the partial file we start with might contain garbage, in the case where a
file changed as it was being downloaded. So, disabling verification on
resumes risked a bad object being put into the annex.
Even downloads with rsync are currently affected. It didn't seem worth the
added complexity to special case those to prevent verification, especially
since git-annex is using rsync less often now.
This commit was sponsored by Brock Spratlen on Patreon.
When git-annex-shell p2pstdio fails with 255, it's because the ssh
server is not reachable. Avoid running the fallback action in this case,
since it would just try a second time to connect, and presumably fail.
Note that the closed P2PSshConnection will not be stored in the pool,
so the next request tries again to connect. This is just the right
behavior; when the remote becomes reachable again, the same git-annex
process will start using it.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Note that, due to not using rsync to transfer files to ssh remotes
any longer, permissions and other file metadata of annexed files
will no longer be preserved when copying them to ssh remotes.
Other remotes never supported preserving that information, so
this is not considered a regression. Added NEWS item about this.
Another significant side effect of this is that, even when rsync is run to
retrieve a file, its progress display will no longer be shown, and
instead the native git-annex progress display will appear. It would be
possible to use the rsync process display when rsync is used (old
git-annex-shell and also retrieval from a local repository), but it
would have complicated the code unncessarily, and been inconsistent
behavior.
(I'd been thinking for a while about eliminating the rsync progress
display, since it's got some annoying verbosities, including display of
the key and the "(xfr#1, to-chk=0/1)" bit and was already somewhat
inconsistent.)
retrieveKeyFileCheap still uses rsync, since that ensures that it gets
the actual file content from the remote. Using the P2P protocol would
use the local content, as long as the local and remote size are the
same.
This commit was sponsored by John Pellman on Patreon.
Remote/Git.hs now contains AGPL licensed code, thus the license
of git-annex as a whole is AGPL. This was already the case when git-annex
was built with the webapp enabled.
The AGPL license will apply to all code added to Remote/Git.hs in the
future, which is going to include support for using
`git-annex-shell p2pstdio`.
Not yet used by git-annex, but this will allow faster transfers etc than
using individual ssh connections and rsync.
Not called git-annex-shell p2p, because git-annex p2p does something
else and I don't want two subcommands with the same name between the two
for sanity reasons.
This commit was sponsored by Øyvind Andersen Holm.
lockContentShared had a screwy caveat that it didn't verify that the content
was present when locking it, but in the most common case, eg indirect mode,
it failed to lock when the content is not present.
That led to a few callers forgetting to check inAnnex when using it,
but the potential data loss was unlikely to be noticed because it only
affected direct mode I think.
Fix data loss bug when the local repository uses direct mode, and a
locally modified file is dropped from a remote repsitory. The bug
caused the modified file to be counted as a copy of the original file.
(This is not a severe bug because in such a situation, dropping
from the remote and then modifying the file is allowed and has the same
end result.)
And, in content locking over tor, when the remote repository is
in direct mode, it neglected to check that the content was actually
present when locking it. This could cause git annex drop to remove
the only copy of a file when it thought the tor remote had a copy.
So, make lockContentShared do its own inAnnex check. This could perhaps
be optimised for direct mode, to avoid the check then, since locking
the content necessarily verifies it exists there, but I have not bothered
with that.
This commit was sponsored by Jeff Goeke-Smith on Patreon.
Do not treat parts of the filename that contain punctuation or other
non-alphanumeric characters as extensions. Before, such characters were
filtered out.
Note that in 45308ec78b "foo.ba__________r"
was munged to ".bar" and so incorrectly treated as an extension. That was
fixed by changing the filter order, but not allowing punctuation seems a
better fix.
This assumes that extensions containing punctuation are rare. "_" seems the
most likely character; I used it in ikiwiki "._comment" files. But I can't
recall seeing it anywhere else. It certianly seems that no commonly used
extensions contain punctuation. If git-annex doesn't treat "._comment"
as an extension, it's not likely to break software that expects to see that
extension like some software expects to see .epub or .mp3.
This commit was sponsored by Jack Hill on Patreon.
Prevent ghc and llc from running out of memory when optimising some
files.
Sean Whitton reported that doing this only in Test.hs was insufficient,
the build still OOMed by the time it got to Test.hs. He had earlier found
the build worked when these options are applied globally.
See https://ghc.haskell.org/trac/ghc/ticket/14821 for why it needs -O1;
once that's fixed it may suffice to use "GHC-Options: -O2 -optlo-O2",
although it may also be that the -O1 prevents ghc from using/leaking
as much memory.
os(arm) should match armel, armhf, armeb, and arm.
It probably also matches arm64, somewhat unfortunately since arm64
systems probably tend to have more memory. See list of arches in
https://hackage.haskell.org/package/Cabal-1.22.2.0/docs/src/Distribution-System.html
This commit was sponsored by Henrik Riomar on Patreon.
Renaming is not supported; it might be possible to use --fuzzy to get rsync
to notice the file is being renamed, but that is a bit ..fuzzy.
On the other hand, interrupted transfers of an exported file are resumed,
since rsync is great at that. Had to adjust the exporttree docs, which
said interrupted transfers would restart.
Note that remove no longer makes the empty directory dummy, instead
sending the top-level empty directory. This works just as well and I
noticed the dummy was unncessary when refactoring it into removeGeneric.
Verified that behavior of remove is not changed, and git annex
testremote does pass.
This commit was sponsored by Brock Spratlen on Patreon.
Makefile: Remove chrpath workaround for bug in cabal, which is no longer
needed.
https://github.com/haskell/cabal/issues/2717 says it uses RUNPATH instead
of RPATH now, but I don't even see that for statically linked libraries;
the bug with that appears to be fixed.
cabal-install version 1.24.0.2
compiled using version 1.24.2.0 of the Cabal library
I left the rpath removal using otool on OSX because those straight up
broke the linker, and I don't know if the OSX autobuilder is updated to
a new enough cabal to not need it.
This commit was sponsored by Ewen McNeill on Patreon.
sync: Fix bug that prevented pulling changes into direct mode repositories
that were committed to remotes using git commit rather than git-annex sync.
This commit was supported by the NSF-funded DataLad project.
tips/automatically_adding_metadata/pre-commit-annex: Fix to not silently
skip filenames containing non-ascii characters.
git diff-index defaults to munging non-ascii characters. Using -z makes
it not do that, and then we just change the nulls to newlines.
This commit was sponsored by Jochen Bartl on Patreon.
Added annex.merge-annex-branches config setting which can be used to
disable automatic merge of git-annex branches.
I wonder if git-annex merge/sync/assistant should disable this
setting? Not sure yet, so have not done so. May be that users will not set
it in git config, but pass it via -c to commands that need it.
Checking the config setting adds a very small overhead, but it's
only checked once per command so should be insignificant.
This commit was supported by the NSF-funded DataLad project.
Noticed while running this (which a user posted in a comment they deleted
for some reason):
git-annex importfeed https://vimeo.com/logiingimars/videos/rss
The filename that youtube-dl suggests included a subdirectory,
which didn't exist, so renaming to it failed.
This commit was sponsored by mo on Patreon.
Repositories that are upgraded from before that version to this
one will not break, but will just not see the benefit of the mergedrefs log
speeding things up, until one new ref gets merged in.
Added --json-error-messages option, which includes error messages in the
json output, rather than outputting them to stderr.
The actual rediretion of errors is not implemented yet, this is only
the docs and option plumbing.
This commit was supported by the NSF-funded DataLad project.
Fix behavior of --json-progress followed by --json, in which
the latter option disabled the former.
This commit was supported by the NSF-funded DataLad project.
The ghc options were found by Sean Whitton; the debian arm autobuilders
need those to build w/o OOM, and it seems to involve llvm using too much
memory to optimize Test.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
--json: When there are multiple lines of notes about a file, make the note
field multiline, rather than the old behavior of only including the last
line.
Using newlines in the note is perhaps not ideal, but upgrading it to an
array in this case would be an annoying inconsistency to need to deal with.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Merged from Debian.
I think what this actually deals with is the case where gpg is installed,
but gpg-agent is not, since Utility.Gpg.stdParams enables --use-agent
when GPG_BATCH is set, and the test suite enables GPG_BATCH. So, test suite
will work with gpg not installed, or with both gpg and gpg-agent installed,
but not with only gpg.
For this reason, I've also put in an explicit dep on gnupg, although
dpkg-dev recommends it and all debian package builds tend to have it
available implicitly.
Allows using new special remote messages when git-annex supports them,
and avoiding using them when git-annex is too old. The new INFO is one
such message.
There's also the possibility, currently unused, for the special remote's
reply to include some kind of extensions of its own.
Merging this is blocked by https://github.com/datalad/datalad/issues/2124
since it seems it will break datalad. I checked all the other special
remotes and they will be ok.
This commit was supported by the NSF-funded DataLad project.
It's left up to the special remote to detect when git-annex is new enough
to support the message; an old git-annex will blow up.
This commit was supported by the NSF-funded DataLad project.
Added remote.<name>.annex-checkuuid config, which can be set to false to
disable the default checking of the uuid of remotes that point to
directories. This can be useful to avoid unncessary drive spin-ups and
automounting.
Note that the UUID check is still done before writing to the repository,
to avoid writing to the wrong repository if it got relocated. Check is
also done before checkPresent to avoid getting confused about what is in
which repo. This is effectively the same as the use of git-annex-shell
with a uuid to check that the remote repository is the expected one.
Did not bother with the check for retrieveKeyFile because it doesn't
matter if the wrong repo is used then.
This commit was sponsored by Trenton Cronholm on Patreon.
And for tab completion, by not unnessessarily statting paths to remotes,
which used to cause eg, spin-up of removable drives.
Got rid of the remotes member of Git.Repo. This was a bit painful.
Remote.Git modifies the list of remotes as it reads their configs,
so still need a persistent list of remotes. So, put it in as
Annex.gitremotes. It's only populated by getGitRemotes, so commands
like examinekey that don't care about remotes won't do so.
This commit was sponsored by Jake Vosloo on Patreon.
git grep writeFile finds some more that might also be problems, but
for now I've concentrated on .git/annex/ log files. There are certianly
cases where writeFile is not a problem too.
This commit was sponsored by mo on Patreon.
Fourth or fifth try at this and finally found a way to make it work.
Absurd amount of busy-work forced on me by change in cabal's behavior.
Split up Utility modules that need posix stuff out of ones used by
Setup. Various other hacks around inability for Setup to use anything
that ifdefs a use of unix.
Probably lost a full day of my life to this.
This is how build systems make their users hate them. Just saying.
And also now in non-fast mode, since it was just changed to query for the
filename separately.
And avoid processTranscript which mixed up stdout and stderr and could have
led to weirdness if there were warnings that didn't get suppressed.
addurl: When the file youtube-dl will download is already an annexed file,
don't download it again and fail to overwrite it, instead just do nothing,
like it used to when quvi was used.
This commit was sponsored by Anthony DeRobertis on Patreon.
This reverts commit 51228c2306.
No, still doesn't work when built with cabal. It did with stack; stack
must somehow make the unix package implicitly available.
With cabal, System.Posix.Process and System.Posix.Env are both missing.
Seems I had all the work in past commits to make this build, at least on
linux. I'm actually surprised it does, without a unix dep, Utility.Env
still builds ok somehow despite using System.Posix.Env.
This commit was sponsored by Fernando Jimenez on Patreon.
Chose to make this only handle files actively being downloaded, not temp
files for downloads that were interrupted or files that have been fully
downloaded.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Test suite is always included.
Building with this flag disabled has actually been broken for some time,
since Command.TestRemote uses tasty. Fewer build flags are better, so good
time to drop it.
This commit was sponsored by Thomas Hochstein on Patreon.
A top-level .noannex file will prevent git-annex init from being used in a
repository. This is useful for repositories that have a policy reason not
to use git-annex. The content of the file will be displayed to the user who
tries to run git-annex init.
This also affects git annex reinit and initialization via the webapp.
It does not affect automatic inits, when there's a sibling git-annex branch
already.
This commit was supported by the NSF-funded DataLad project.
lookupkey: Support being given an absolute filename to a file within the
current git repository.
This commit was supported by the NSF-funded DataLad project.
initremote, enableremote: Really support gpg subkeys suffixed with an
exclamation mark, which forces gpg to use a specific subkey. (Previous try
had a bug.)
This commit was sponsored by Jake Vosloo on Patreon.
Better to make it not be surprising and slow, than surprising and fast.
--raw can be used when it needs to be really fast.
Implemented adding a youtube-dl supported url to an existing file.
This commit was sponsored by andrea rota.
Fully working, including --fast/--relaxed.
Note that, while git-annex addurl --relaxed is not going to check
youtube-dl, I kept git annex importfeed --relaxed checking it.
Thinking is that, let's not break people's importfeed cron jobs, and
importfeed does not typically have to check a large number of new items,
so it's ok if it's a little bit slower when used with youtube playlist
feeds.
importfeed's behavior is also improved (?) when a feed has links in it
to non-media files. Before, those were skipped. Now, the content of the
link is downloaded. This had to be done, because trying to use
youtube-dl is slow, and if those were skipped, it would have to check
every time importfeed was run. While this behavior change may not be
desirable for some feeds, that intersperse links to web pages with
enclosures, it will be desirable for other feeds, that have
non-enclosure directy links to media files.
Remove old quvi modules.
This commit was sponsored by Øyvind Andersen Holm.
As it was getting too expensive to patch out use of the "new" syscalls
We could revisit this if someone has hardware with an older kernel
that's still being maintained, but I've verified that the Synology
NAS that had used a too old kernel version has been updated to 2.6.32.
Was trying to rmdir the file, which had already been deleted, and when that
failed, it skipped trying to delete the parent directories.
Noticed the bug through testremote, but it can't itself detect such
problems as there is no enumeration in the API.
This commit was sponsored by Brock Spratlen on Patreon.
As long as the class of remotes supports exporting, it's tested whether
or not the remote is configured with exporttree=yes.
Also, made testremote of a remote configured with exporttree=yes
disable that configuration for testing non-export storage.
This commit was supported by the NSF-funded DataLad project.
When there are multiple urls for a file, still treat it as being present
in the web when some urls don't work, as long as at least one url does
work.
This is consistent with the other web methods handling of multiple urls.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Actual problem is the keyName was set to "Ref \"sha\"", which led to
this follow-on failure since it contained a space.
The bad data would also get into the export database when exporting to a
non-external special remote. Looking briefly at that, I don't think the bad
data will lead to anything more than a re-upload of the file content
now that the problem has been fixed.
This commit was sponsored by Peter Hogg on Patreon.
Seems I forgot to fully test that feature when documenting it.
git rev-parse needs a colon after a branch to de-reference the tree
it points to, rather than the commit. But that had it adding an extra
colon when the user specified "branch:subdir". So, check if there is a
colon before adding one.
This commit was sponsored by Francois Marier on Patreon.
Windows: Fix reversion that caused the path used to link to annexed
content include the drive letter and full path, rather than being
relative. (`git annex fix` will fix up after this problem).
I've not identified the commit that brought the reversion (probably it
happened this spring when I was removing MisingH and last touched
Utility.Path). Likely commit 18b9a4b8024115db67ae309fdaf54e1553037529?
The problem is that relPathDirToFile got called two paths that had the
slashes different ways around. Since takeDrive includes the first slash,
this made two paths on the same drive seem different and it bailed.
(ifdefs around this to avoid doing extra work on non-windows)
This commit was sponsored by Jack Hill on Patreon.
Get ugly reversion out of CHANGELOG.
Also, relocated the windows stack.yaml to top, and updated windows build
instructions.
This commit was sponsored by Henrik Riomar on Patreon.
wget was broken even in the previous old release of the windows bundle,
this is not new breakage. msys-idn-11.dll and probably more would be needed
to use it. git for windows includes msys-idn2-0.dll instead.
Code for terminating processes on Windows is not linking anymore;
made a warning be displayed instead. This breaks restarting the
assistant and git annex assistant --stop.
I hope to see the code added to the Win32 library, where it should fit
better and should avoid whatever problem is making the linker not like it
when included in git-annex. I opened an issue requesting its addition,
here: https://github.com/haskell/win32/issues/91
This commit was sponsored by Thomas Hochstein on Patreon.
This avoids all the complication about redundant work discussed in
the previous try at fixing this. At the expense of needing each command
that could have the problem to be patched to simply wrap the action in
onlyActionOn once the key is known. But there do not seem to be many
such commands.
onlyActionOn' should not be used with a CommandStart (or CommandPerform),
although the types do allow it. onlyActionOn handles running the whole
CommandStart chain. I couldn't immediately see a way to avoid mistken
use of onlyActionOn'.
This commit was supported by the NSF-funded DataLad project.
