Had to add Read instances to Key and NumCopies and some other similar
types. I only expect to use those in serializing a sim. Of course, this
risks that implementation changes break reading old data. For a sim,
that would not be a big problem.
The generator doesn't emit the best possible connect commands,
but it does output something valid. Eg, an input like:
connect A <-> B <-> C <-> D
becomes:
connect A <-> B <-> C
connect C <-> D
Also:
connect A -> B <- C
becomes:
connect A -> B
connect C -> B
Which could be improved.
Also disconnect commands are not prettified at all, but probably there's
no reason to.
Have most of the sim command handler, but to keep it pure while implementing
the rest will need some refactoring.
It seems likely that running the simulation itself will not be able to be
entirely pure. Preferred content evaluation runs in Annex after all.
Note that the somewhat awkward randomWords is because the i386ancient
build depends on a version of random too old to support generating a
random ByteString on its own.
copy and get do check preferred content, so need to prepareLiveUpdate.
move and mirror do not, but copy is implemented using move, so move also
needed to have a LiveUpdate plumbed through.
Each command that first checks preferred content (and/or required
content) and then does something that can change the sizes of
repositories needs to call prepareLiveUpdate, and plumb it through the
preferred content check and the location log update.
So far, only Command.Drop is done. Many other commands that don't need
to do this have been updated to keep working.
There may be some calls to NoLiveUpdate in places where that should be
done. All will need to be double checked.
Not currently in a compilable state.
A new repo that has no location log info yet, but has an entry in
uuid.log has 0 size, so make RepoSize aware of that.
Note that a new repo that does not yet appear in uuid.log will still not
be displayed.
When a remote is added but not synced with yet, it has no uuid.log
entry. If git-annex maxsize is used to configure that remote, it needs
to appear in the maxsize table, and the change to Command.MaxSize takes
care of that.
updateRepoSize is only called on the UUID of a repository, not any
cluster it might be a node of. But overLocationLogs and overLocationLogsJournal
were inclusing cluster UUIDs. So it was inconsistent.
Currently I don't see any reason to calculate RepoSize for a cluster.
It's not even clear what it should mean, the total size of all nodes, or
the amount of information stored in the cluster in total?
This will be used to prime the RepoSizes database, which will always
contain values that correpond to information in the git-annex branch, so
without anything from journal files.
Factored out overJournalFileContents which will later be used to
update Annex.reposizes to include information from journal files.
This will be partitcularly important to support private UUIDs which only
ever get to journal files and not to the branch.
5afbea25e7 changed it to ignore journal
files that did not correspond to a key in the git-annex branch. However,
when there is a private journal, that can happen.
Neither behavior is fully correct, so keep the old incorrect behavior
rather than introducing a new differently incorrect behavior.
I plan to eventually make git-annex info use Annex.reposizes instead of
calculating it itself, and once Annex.reposizes handles this all
correctly, this will be a moot problem.
git-annex info was displaying a message that didn't make sense in
context.
In calcRepoSizes, it seems better to return the information from the
git-annex branch, rather than giving up. Especially since balanced
preferred content uses it, and we can't just give up evaluating a
preferred content expression if git-annex is to be usable in such a
readonly repo.
Commit 6d7ecd9e5d nobly wanted git-annex
to behave the same with such unmerged branches as it does when it can
merge them. But for the purposes of preferred content, it seems to me
there's a sense that such an unmerged branch is the same as a remote we
have not pulled from. The balanced preferred content will either way
operate under outdated information, and so make not the best choices.
This removes versionedExport, which was only used by the S3 special
remote. Instead, versionedexport=yes is a common way for remotes to
indicate that they are versioned.
This allows git-annex post-receive, on the first push to
the remote to see that it is able to get a key from it in
order to upload it back.
Also avoided actively checking if the source remote contains a key.
The location log is good enough. If the location log is wrong,
the export of that file will fail with an informative message.
This handles cases where a single key is used by multiple files in the
exported tree. When using `git-annex push`, the key's content gets
stored in the annexobjects location, and then when the branch is pushed,
it gets renamed from the annexobjects location to the first exported
file. For subsequent exported files, a copy of the content needs to be
made. This causes it to download the key from the remote in order to
upload another copy to it.
This is not needed when using `git push` followed by `git-annex copy --to`
the proxied remote, because the received key is stored at all export
locations then.
Also, fixed handling of the synced branch push, it was exporting master
when synced/master was pushed.
Note that currently, the first push to the remote does not see that it
is able to get a key from it in order to upload it back. It displays
"(not available)". The second push is able to. Since git-annex push
pushes first the synced branch and then the branch, this does end up
with a full export being made, but it is not quite right.
This is similar to git-annex copy --from --to, in that it downloads a
local copy, locks it for removal, uploads it, and drops it. Removal of
the temporary local copy is done without verifying numcopies for the
same reason as that command.
I do wonder, looking at this, if there's a race where the local copy
gets used as a copy to allow some other drop in the narrow window after
it is downloaded and before it gets locked for removal. That would need
some other repository to have an out of date location log that says the
repository contains a copy of the key, in order for it to try to use it
as a copy. If there is such a race, git-annex copy/move would also be
vulnerable to it. It would be better to lock it for removal before
starting to download it! That is possible in v10 repositories, which do
use a separate content lock file.
Note that, when the exported tree contains several files that use the
same key, it will be downloaded repeatedly, once per time needed to
upload it. It would be possible to avoid that extra work, but it would
complicate this since the local copy would need to be preserved, locked
for removal, until the end. Also, that would mean that interrupting the
export would leave possibly a lot of temporarily downloaded keys in the
local repository, while currently it can only leave one.
When a file never got exported to the remote, and is now being removed
from the exported tree, it tried to rename, which failed, and displayed
an ugly warning:
unexport d m8
rename failed (/home/joey/tmp/bench2/d/m8: renameFile:renamePath:rename: does not exist (No such file or directory)); deleting instead
ok
Since git-annex sync sends the sync branch first, and only displays the
output of the push to the sync branch, this makes git-annex
post-retrieve's output when updating the exported tree be visible when
syncing.
This also makes syncing with a non-bare repository still update the
exported tree, even when the checked out branch is not able to be
updated. The sync branch gets sent regardless.
It works when using git-annex sync/push/assist, or when manually sending
all content to the proxied remote before pushing to the proxy remote.
But when the push comes before the content is sent, sending content does
not update the exported tree.
(When possible, of course it may not be there, or it may get renamed from
there for another exported file first. Or the remote may not support
renames.)
This will avoids redundant uploads.
An example case where this is important: Proxying to a exporttree remote,
a file is uploaded to it but is not yet in an exported tree. When the
exported tree is pushed, the remote needs to be updated by exporting to
it. In this case, the proxy doesn't have a copy of the file, so it would
need to download it from annexobjects before uploading it to the final
location. With this optimisation, it can just rename it.
However: If a key is used twice in an exported tree, it seems a proxy
will need to download and reupload anyway. Unless a copy operation is
added to exporttree remotes..
This avoids needing to re-upload the file again to get it to the
annexobjects location, which git-annex sync was doing when it was
preferred content.
If the file is not preferred content, sync will drop it from the
annexobjects location.
If the file has been deleted from the tree, it will remain in the
annexobjects location until an unused/dropunused pass is done.
