In keyUrls, the GitConfig is used only by annexLocations
to support configured Differences. Since such configurations affect all
clones of a repository, the local repo's GitConfig must have the same
information as the remote's GitConfig would have. So, used getGitConfig
to get the local GitConfig, which is cached and so available cheaply.
That actually fixed a bug noone had ever noticed: keyUrls is
used for remotes accessed over http. The full git config of such a
remote is normally not available, so the remoteGitConfig that keyUrls
used would not have the necessary information in it.
In copyFromRemoteCheap', it uses gitAnnexLocation,
which does need the GitConfig of the remote repo itself in order to
check if it's crippled, supports symlinks, etc. So, made the
State include that GitConfig, cached. The use of gitAnnexLocation is
within a (not $ Git.repoIsUrl repo) guard, so it's local, and so
its git config will always be read and available.
(Note that gitAnnexLocation in turn calls annexLocations, so the
Differences config it uses in this case comes from the remote repo's
GitConfig and not from the local repo's GitConfig. As explained above
this is ok since they must have the same value.)
Not very happy with this mess of different GitConfigs not type-safe and
some read only sometimes etc. Very hairy. Think I got it this change
right. Test suite passes..
This commit was sponsored by Ethan Aubin.
This is groundwork for letting a repo be instantiated the first time
it's actually used, instead of at startup.
The only behavior change is that some old special cases for xmpp remotes
were removed. Where before git-annex silently did nothing with those
no-longer supported remotes, it may now fail in some way.
The additional IO action should have no performance impact as long as
it's simply return.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon
https://prime.haskell.org/wiki/Libraries/Proposals/SemigroupMonoid
I am not happy with the fragile pile of CPP boilerplate required to support
ghc back to 7.0, which git-annex still targets for both the android build
and the standalone build targeting old linux kernels. It makes me unlikely
to want to use Semigroup more in git-annex, because the benefit of the
abstraction is swamped by the ugliness. I actually considered ripping out
all the Semigroup instances, but some are needed to use
optparse-applicative.
The problem, I think, is they made this transaction on too fast a timeline.
(Although ironically, work on it started in 2015 or earlier!)
In particular, Debian oldstable is not out of security support, and it's
not possible to follow the simpler workarounds documented on the wiki and
have it build on oldstable (because the semigroups package in it is too
old).
I have only tested this build with ghc 8.2.2, not the newer and older
versions that branches of the CPP support. So there could be typoes, we'll
see.
This commit was sponsored by Brock Spratlen on Patreon.
Switch to Data.Map.Strict everywhere that used it.
There are still lots of lazy maps in git-annex. I think switching these
is safe. The risk is that there might be a map that is used in a way
that relies on the values not being evaluated to WHNF, and switching to
strict might result in bad performance or memory use. So, I have not
switched everything.
As long as all code imports Utility.Aeson rather than Data.Aeson,
and no Strings that may contain utf-8 characters are used for eg, object
keys via T.pack, this is guaranteed to fix the problem everywhere that
git-annex generates json.
It's kind of annoying to need to wrap ToJSON with a ToJSON', especially
since every data type that has a ToJSON instance has to be ported over.
However, that only took 50 lines of code, which is worth it to ensure full
coverage. I initially tried an alternative approach of a newtype FileEncoded,
which had to be used everywhere a String was fed into aeson, and chasing
down all the sites would have been far too hard. Did consider creating an
intentionally overlapping instance ToJSON String, and letting ghc fail
to build anything that passed in a String, but am not sure that wouldn't
pollute some library that git-annex depends on that happens to use ToJSON
String internally.
This commit was supported by the NSF-funded DataLad project.
Flipped all comparisons. When a TrustLevel list was wanted from Trusted
downwards, used Down to compare it in that order.
This commit was sponsored by mo on Patreon.
This commit removes the Ord and Enum instances, commenting out all code
that depends on them, to make sure that all code effected by the
inversion fix has been identified.
(Assuming no ifdefs involve TrustLevel.)
The next commit will fix up all the identified code.
When adding a new version of a file, and annex.genmetadata is enabled,
don't copy the data metadata from the old version of the file, instead use
the mtime of the file. Rationalle being that the user has requested to
generate metadata and so would expect to get the new mtime into metadata.
Also, avoid warning about copying metadata when all the old metadata is
date metadata. Which was rather the harder part.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
git annex testremote passes.
exportree not implemented yet, although the documentation talks about it,
since it will be the main way this remote will be used.
The adb push/pull progress is displayed for now; it would be better
to consume it and use it to update the git-annex progress bar.
This commit was sponsored by andrea rota.
Some blake hash varieties were not yet available in that version.
Rather than tracking exact details of what cryptonite supported when,
disable blake unless using a current cryptonite.
There are a lot of different variants and sizes, I suppose we might as well
export all the common ones.
Bump dep to cryptonite to 0.16, earlier versions lacked BLAKE2 support.
Even android has 0.16 or newer.
On Debian, Blake2bp_512 is buggy, so I have omitted it for now.
http://bugs.debian.org/892855
This commit was sponsored by andrea rota.
When resuming a download and not using a rolling checksummer like rsync,
the partial file we start with might contain garbage, in the case where a
file changed as it was being downloaded. So, disabling verification on
resumes risked a bad object being put into the annex.
Even downloads with rsync are currently affected. It didn't seem worth the
added complexity to special case those to prevent verification, especially
since git-annex is using rsync less often now.
This commit was sponsored by Brock Spratlen on Patreon.
P2P protocol version 1 adds VALID|INVALID after DATA; INVALID means the
file was detected to change content while it was being sent and so we
may not have received the valid content of the file.
Added new MustVerify constructor for Verification, which forces
verification even when annex.verify=false etc. This is used when INVALID
and in protocol version 0.
As well as changing git-annex-shell p2psdio, this makes git-annex tor
remotes always force verification, since they don't yet use protocol
version 1. Previously, annex.verify=false could skip verification when
using tor remotes, and let bad data into the repository.
This commit was sponsored by Jack Hill on Patreon.
Added annex.merge-annex-branches config setting which can be used to
disable automatic merge of git-annex branches.
I wonder if git-annex merge/sync/assistant should disable this
setting? Not sure yet, so have not done so. May be that users will not set
it in git config, but pass it via -c to commands that need it.
Checking the config setting adds a very small overhead, but it's
only checked once per command so should be insignificant.
This commit was supported by the NSF-funded DataLad project.
Added --json-error-messages option, which includes error messages in the
json output, rather than outputting them to stderr.
The actual rediretion of errors is not implemented yet, this is only
the docs and option plumbing.
This commit was supported by the NSF-funded DataLad project.
Fix behavior of --json-progress followed by --json, in which
the latter option disabled the former.
This commit was supported by the NSF-funded DataLad project.
Added remote.<name>.annex-checkuuid config, which can be set to false to
disable the default checking of the uuid of remotes that point to
directories. This can be useful to avoid unncessary drive spin-ups and
automounting.
Note that the UUID check is still done before writing to the repository,
to avoid writing to the wrong repository if it got relocated. Check is
also done before checkPresent to avoid getting confused about what is in
which repo. This is effectively the same as the use of git-annex-shell
with a uuid to check that the remote repository is the expected one.
Did not bother with the check for retrieveKeyFile because it doesn't
matter if the wrong repo is used then.
This commit was sponsored by Trenton Cronholm on Patreon.
Test suite is always included.
Building with this flag disabled has actually been broken for some time,
since Command.TestRemote uses tasty. Fewer build flags are better, so good
time to drop it.
This commit was sponsored by Thomas Hochstein on Patreon.
Better to make it not be surprising and slow, than surprising and fast.
--raw can be used when it needs to be really fast.
Implemented adding a youtube-dl supported url to an existing file.
This commit was sponsored by andrea rota.
Including resuming and cleanup of incomplete downloads.
Still todo: --fast, --relaxed, importfeed, disk reserve checking,
quvi code cleanup.
This commit was sponsored by Anthony DeRobertis on Patreon.
This avoids all the complication about redundant work discussed in
the previous try at fixing this. At the expense of needing each command
that could have the problem to be patched to simply wrap the action in
onlyActionOn once the key is known. But there do not seem to be many
such commands.
onlyActionOn' should not be used with a CommandStart (or CommandPerform),
although the types do allow it. onlyActionOn handles running the whole
CommandStart chain. I couldn't immediately see a way to avoid mistken
use of onlyActionOn'.
This commit was supported by the NSF-funded DataLad project.
After a false start, I found a fairly non-intrusive way to deal with it.
Although it only handles transfers -- there may be issues with eg
concurrent dropping of the same key, or other operations.
There is no added overhead when -J is not used, other than an added
inAnnex check. When -J is used, it has to maintain and check a small
Set, which should be negligible overhead.
It could output some message saying that the transfer is being done by
another thread. Or it could even display the same progress info for both
files that are being downloaded since they have the same content. But I
opted to keep it simple, since this is rather an edge case, so it just
doesn't say anything about the transfer of the file until the other
thread finishes.
Since the deferred transfer action still runs, actions that do more than
transfer content will still get a chance to do their other work. (An
example of something that needs to do such other work is P2P.Annex,
where the download always needs to receive the content from the peer.)
And, if the first thread fails to complete a transfer, the second thread
can resume it.
But, this unfortunately means that there's a risk of redundant work
being done to transfer a key that just got transferred.
That's not ideal, but should never cause breakage; the same
thing can occur when running two separate git-annex processes.
The get/move/copy/mirror --from commands had extra inAnnex checks added,
inside the download actions. Without those checks, the first thread
downloaded the content, and then the second thread woke up and
downloaded the same content redundantly.
move/copy/mirror --to is left doing redundant uploads for now. It
would need a second checkPresent of the remote inside the upload
to avoid them, which would be expensive. A better way to avoid
redundant work needs to be found..
This commit was supported by the NSF-funded DataLad project.
Motivation is to remove all metadata when it gets copied from a previous
version of the file, and that is not deisrable.
This commit was supported by the NSF-funded DataLad project.
New table needed to look up what filenames are used in the currently
exported tree, for reasons explained in export.mdwn.
Also, added smart constructors for ExportLocation and ExportDirectory to
make sure they contain filepaths with the right direction slashes.
And some code refactoring.
This commit was sponsored by Francois Marier on Patreon.
The subtle part of this is what happens when the remote fails to remove
an empty directory. The removal from the export needs to fail in that
case, so the removal will be tried again later. However, removeExportLocation
has already been run and changed the export db, so if the next run
checks getExportLocation, it might decide nothing remains to be done,
leaving the empty directory.
Dealt with that by making removeEmptyDirectories, handle a failure
by calling addExportLocation, reverting the database changes so the next
run will be guaranteed to try deleting the empty directory again.
This commit was sponsored by Thomas Hochstein on Patreon.
Not yet called by Command.Export.
WebDAV needs this to clean up empty collections. Also, example.sh turned
out to not be cleaning up directories when removing content
from them, so it made sense for it to use this.
Remote.Directory did not need it, and since its cleanup method for empty
directories is more efficient than what Command.Export will need to do
to find empty directories, it uses Nothing so that extra work can be
avoided.
This commit was sponsored by Thom May on Patreon.
Don't allow "exporttree=yes" to be set when the special remote
does not support exports. That would be confusing since the user would
set up a special remote for exports, but `git annex export` to it would
later fail.
This commit was supported by the NSF-funded DataLad project.
This is seriously super hairy. It has to handle interrupted exports,
which may be resumed with the same or a different tree. It also has to
recover from export conflicts, which could cause the wrong content
to be renamed to a file.
I think this works, or is close to working. See the update to the design
for how it works.
This is definitely not optimal, in that it does more renames than are
necessary. It would probably be worth finding the keys that are really
renamed and only renaming those. But let's get the "simple" approach to
work first..
This commit was supported by the NSF-funded DataLad project.
Straightforward enough, except for the needed belt-and-suspenders sanity
checks to avoid foot shooting due to exports not being key/value stores.
* Even when annex.verify=false, always verify from exports.
* Only get files from exports that use a backend that supports
checksum verification.
* Never trust exports, even if the user says to, because then
`git annex drop` would drop content if the export seemed to contain
a copy.
This commit was supported by the NSF-funded DataLad project.
Removed uncorrect UniqueKey key in db schema; a key can appear multiple
times with different files.
The database has to be flushed after each removal. But when adding files
to the export, lots of changes are able to be queued up w/o flushing.
So it's still fairly efficient.
If large removals of files from exports are too slow, an alternative
would be to make two passes over the diff, one pass queueing deletions
from the database, then a flush and the a second pass updating the
location log. But that would use more memory, and need to look up
exportKey twice per removed file, so I've avoided such optimisation yet.
This commit was supported by the NSF-funded DataLad project.
* Only export to remotes that were initialized to support it.
* Prevent storing key/value on export remotes.
* Prevent enabling exporttree=yes and encryption in the same remote.
SetupStage Enable was changed to take the old RemoteConfig.
This allowed only setting exporttree when initially setting up a
remote, and not configuring it later after stuff might already be stored
in the remote.
Went with =yes rather than =true for consistency with other parts of
git-annex. Changed docs accordingly.
This commit was supported by the NSF-funded DataLad project.
This will allow disabling exports for remotes that are not configured to
allow them. Also, exportSupported will be useful for the external
special remote to probe.
This commit was supported by the NSF-funded DataLad project
This avoids needing to deal with the complexity of partially transferred
files in the export. We'd not be able to resume uploading to such a file
anyway, so just avoid them.
The implementation in Remote.Directory is not completely ideal, because
it could leave the temp file hanging around in the export directory.
This only happens if it's killed with -9, or there's a power failure;
normally viaTmp cleans up after itself, even when interrupted. I could
not see a better way to do it though, since the export directory might
be the root of a filesystem.
Also some design thoughts on resuming, which depend on storeExport being
atomic.
This commit was sponsored by Fernando Jimenez on Partreon.
Rather than providing the key to export, provide the file.
When exporting a treeish that contains files that are not annexed,
this will let the content of those files also be exported.
There's still a Key in the interface; it will be used by the external
special remote protocol. A SHA1 key can be used when exporting
non-annexed files.
This commit was sponsored by Brock Spratlen on Patreon.
Implemented so far for the directory special remote.
Several remotes don't make sense to export to. Regular Git remotes,
obviously, do not. Bup remotes almost certianly do not, since bup would
need to be used to extract the export; same store for Ddar. Web and
Bittorrent are download-only. GCrypt is always encrypted so exporting to
it would be pointless. There's probably no point complicating the Hook
remotes with exporting at this point. External, S3, Glacier, WebDAV,
Rsync, and possibly Tahoe should be modified to support export.
Thought about trying to reuse the storeKey/retrieveKeyFile/removeKey
interface, rather than adding a new interface. But, it seemed better to
keep it separate, to avoid a complicated interface that sometimes
encrypts/chunks key/value storage and sometimes users non-key/value
storage. Any common parts can be factored out.
Note that storeExport is not atomic.
doc/design/exporting_trees_to_special_remotes.mdwn has some things in
the "resuming exports" section that bear on this decision. Basically,
I don't think, at this time, that an atomic storeExport would help with
resuming, because exports are not key/value storage, and we can't be
sure that a partially uploaded file is the same content we're currently
trying to export.
Also, note that ExportLocation will always use unix path separators.
This is important, because users may export from a mix of windows and
unix, and it avoids complicating the API with path conversions,
and ensures that in such a mix, they always use the same locations for
exports.
This commit was sponsored by Bruno BEAUFILS on Patreon.
Added remote configuration settings annex-ignore-command and
annex-sync-command, which are dynamic equivilants of the annex-ignore
and annex-sync configurations.
For this I needed a new DynamicConfig infrastructure. Its implementation
should be as fast as before when there is no dynamic config, and it caches
so shell commands are only run once.
Note that annex-ignore-command exits nonzero when the remote should be ignored.
While that may seem backwards, it allows using the same command for it as
for annex-sync-command when you want to disable both.
This commit was sponsored by Trenton Cronholm on Patreon.
* Added annex.resolvemerge configuration, which can be set to false to
disable the usual automatic merge conflict resolution done by git-annex
sync and the assistant.
* sync: Added --no-resolvemerge option.
Note that disabling merge conflict resolution is probably not a good idea
in a direct mode repo or adjusted branch. Since updates to both are done
outside the usual work tree, if it fails the tree is not left in a
conflicted state, and it would be hard to manually resolve the conflict.
Still, made annex.resolvemerge be supported in those cases for consistency.
This commit was sponsored by Riku Voipio.
Removed dependency on MissingH, instead depending on the split
library.
After laying groundwork for this since 2015, it
was mostly straightforward. Added Utility.Tuple and
Utility.Split. Eyeballed System.Path.WildMatch while implementing
the same thing.
Since MissingH's progress meter display was being used, I re-implemented
my own. Bonus: Now progress is displayed for transfers of files of
unknown size.
This commit was sponsored by Shane-o on Patreon.
When ssh connection caching is enabled (and when GIT_ANNEX_USE_GIT_SSH is
not set), only one ssh password prompt will be made per host, and only one
ssh password prompt will be made at a time.
This also fixes a race in prepSocket's stale ssh connection stopping
when run with -J. It was possible for one thread to start a cached ssh
connection, and another thread to immediately stop it, resulting in excess
connections being made.
This commit was supported by the NSF-funded DataLad project.
It takes a single key-value backend, rather than the unncessary and confusing list.
The old option still works if set.
Simplified some old old code too.
This commit was sponsored by Thomas Hochstein on Patreon.
