This removes versionedExport, which was only used by the S3 special
remote. Instead, versionedexport=yes is a common way for remotes to
indicate that they are versioned.
Added Maybe POSIXTime to SafeDropProof, which gets set when the proof is
based on a LockedCopy. If there are several LockedCopies, it uses the
closest expiry time. That is not optimal, it may be that the proof
expires based on one LockedCopy but another one has not expired. But
that seems unlikely to really happen, and anyway the user can just
re-run a drop if it fails due to expiry.
Pass the SafeDropProof to removeKey, which is responsible for checking
it for expiry in situations where that could be a problem. Which really
only means in Remote.Git.
Made Remote.Git check expiry when dropping from a local remote.
Checking expiry when dropping from a P2P remote is not yet implemented.
P2P.Protocol.remove has SafeDropProof plumbed through to it for that
purpose.
Fixing the remaining 2 build warnings should complete this work.
Note that the use of a POSIXTime here means that if the clock gets set
forward while git-annex is in the middle of a drop, it may say that
dropping took too long. That seems ok. Less ok is that if the clock gets
turned back a sufficient amount (eg 5 minutes), proof expiry won't be
noticed. It might be better to use the Monotonic clock, but that doesn't
advance when a laptop is suspended, and while there is the linux
Boottime clock, that is not available on other systems. Perhaps a
combination of POSIXTime and the Monotonic clock could detect laptop
suspension and also detect clock being turned back?
There is a potential future flag day where
p2pDefaultLockContentRetentionDuration is not assumed, but is probed
using the P2P protocol, and peers that don't support it can no longer
produce a LockedCopy. Until that happens, when git-annex is
communicating with older peers there is a risk of data loss when
a ssh connection closes during LOCKCONTENT.
When a file in the export is renamed, and the remote's renameExport
returned Nothing, renaming to the temp file would first say it was
renaming, and appear to succeed, but actually what it did was delete the
file. Then renaming from the temp file would not do anything, since the
temp file is not present on the remote. This appeared as if a file got
renamed to a temp file and left there.
Note that exporttree=yes importree=yes remotes have their usual
renameExport replaced with one that returns Nothing. (For reasons
explained in Remote.Helper.ExportImport.) So this happened
even with remotes that support renameExport.
Fix by letting renameExport = Nothing when it's not supported at all.
This avoids displaying the rename.
Sponsored-by: Graham Spencer on Patreon
This is groundwork for making special remotes like borg be skipped by
sync when on an offline drive.
Added AVAILABILITY UNAVAILABLE reponse and the UNAVAILABLERESPONSE extension
to the external special remote protocol. The extension is needed because
old git-annex, if it sees that response, will display a warning
message. (It does continue as if the remote is globally available, which
is acceptable, and the warning is only displayed at initremote due to
remote.name.annex-availability caching, but still it seemed best to make
this a protocol extension.)
The remote.name.annex-availability git config is no longer used any
more, and is documented as such. It was only used by external special
remotes to cache the availability, to avoid needing to start the
external process every time. Now that availability is queried as an
Annex action, the external is only started by sync (and the assistant),
when they actually check availability.
Sponsored-by: Nicholas Golder-Manning on Patreon
This does, as a side effect, make long notes in json output not
be indented. The indentation is only needed to offset them
underneath the display of the file they apply to, so that's ok.
Sponsored-by: Brock Spratlen on Patreon
giveup changed to filter out control characters. (It is too low level to
make it use StringContainingQuotedPath.)
error still does not, but it should only be used for internal errors,
where the message is not attacker-controlled.
Changed a lot of existing error to giveup when it is not strictly an
internal error.
Of course, other exceptions can still be thrown, either by code in
git-annex, or a library, that include some attacker-controlled value.
This does not guard against those.
Sponsored-by: Noam Kremen on Patreon
Note that when this is specified and an older git-annex is used to
enableremote such a special remote, it will simply ignore the cost= field
and use whatever the default cost is.
In passing, fixed adb to support the remote.name.cost and
remote.name.cost-command configs.
Sponsored-by: Dartmouth College's DANDI project
On Windows, that does not support long paths
https://github.com/jacobstanley/unix-compat/issues/56
Instead, use System.Directory.renamePath, which does support long paths.
Sponsored-by: Dartmouth College's Datalad project
Some small wins, almost certianly swamped by the system calls, but still
worthwhile progress on the RawFilePath conversion.
Sponsored-by: Erik Bjäreholt on Patreon
None of the special remotes do it yet, but this lays the groundwork.
Added MustFinishIncompleteVerify so that, when an incremental verify is
started but not complete, it can be forced to finish it. Otherwise, it
would have skipped doing it when verification is disabled, but
verification must always be done when retrievin from export remotes
since files can be modified during retrieval.
Note that retrieveExportWithContentIdentifier doesn't support incremental
verification yet. And I'm not sure if it can -- it doesn't know the Key
before it downloads the content. It seems a new API call would need to
be split out of that, which is provided with the key.
Sponsored-by: Dartmouth College's Datalad project
rsync 3.2.4 broke backwards-compatability by preventing exposing filenames
to the shell. Made the rsync and gcrypt special remotes detect this and
disable shellescape.
An alternative fix would have been to always set RSYNC_OLD_ARGS=1.
Which would avoid the overhead of probing rsync --help for each affected
remote. But that is really very fast to run, and it seemed better to switch
to the modern code path rather than keeping on using the bad old code path.
Sponsored-by: Tobias Ammann on Patreon
Added fileRetriever', which will let the remaining special remotes
eventually also support incremental verify.
Sponsored-by: Dartmouth College's DANDI project
This fixes fsck of a remote that uses chunking displaying
(checking remotename) (checking remotename)" for every chunk.
Also, some remotes displayed the message, and others did not, with no
consistency. It was originally displayed only when accessing remotes
that were expensive or might involve a password prompt, I think, but
nothing in the API said when to do it so it became an inconsistent mess.
Originally I thought fsck should always display it. But it only displays
in fsck --from remote, so the user knows the remote is being accessed,
so there is no reason to tell them it's accessing it over and over.
It was also possible for git-annex move to sometimes display it twice,
due to checking if content is present twice. But, the user of move
specifies --from/--to, so it does not need to display when it's
accessing the remote, as the user expects it to access the remote.
git-annex get might display it, but only if the remote also supports
hasKeyCheap, which is really only local git remotes, which didn't
display it always; and in any case nothing displayed it before hasKeyCheap,
which is checked first, so I don't think this needs to display it ever.
mirror is like move. And that's all the main places it would have been
displayed.
This commit was sponsored by Jochen Bartl on Patreon.
This is to support, eg a borg repo as a special remote, which is
populated not by running git-annex commands, but by using borg. Then
git-annex sync lists the content of the remote, learns which files are
annex objects, and treats those as present in the remote.
So, most of the import machinery is reused, to a new purpose. While
normally importtree maintains a remote tracking branch, this does not,
because the files stored in the remote are annex object files, not
user-visible filenames. But, internally, a git tree is still generated,
of the files on the remote that are annex objects. This tree is used
by retrieveExportWithContentIdentifier, etc. As with other import/export
remotes, that the tree is recorded in the export log, and gets grafted
into the git-annex branch.
importKey changed to be able to return Nothing, to indicate when an
ImportLocation is not an annex object and so should be skipped from
being included in the tree.
It did not seem to make sense to have git-annex import do this, since
from the user's perspective, it's not like other imports. So only
git-annex sync does it.
Note that, git-annex sync does not yet download objects from such
remotes that are preferred content. importKeys is run with
content downloading disabled, to avoid getting the content of all
objects. Perhaps what's needed is for seekSyncContent to be run with these
remotes, but I don't know if it will just work (in particular, it needs
to avoid trying to transfer objects to them), so I skipped that for now.
(Untested and unused as of yet.)
This commit was sponsored by Jochen Bartl on Patreon.
Fix bug that made creds not be stored in git when a special remote was
initialized with gpg encryption, but without an explicit embedcreds=yes.
(Yet nother regression introduced in version 7.20200202.7. 5th so far.)
This handles all createProcessSuccess callers, and aside from process
pools, the complete conversion of all process running to async exception
safety should be complete now.
Also, was able to remove from Utility.Process the old API that I now
know was not a good idea. And proof it was bad: The code size went *down*,
despite there being a fair bit of boilerplate for some future API to
reduce.
Finishes the transition to make remote methods throw exceptions, rather
than silently hide them.
A bit on the fence about this one, because when renameExport fails,
it falls back to deleting instead, and so does the user care why it failed?
However, it did let me clean up several places in the code.
This commit was sponsored by Ethan Aubin.
Part of ongoing transition to make remote methods
throw exceptions, rather than silently hide them.
This commit was sponsored by Ilya Shlyakhter on Patreon.
Part of ongoing transition to make remote methods
throw exceptions, rather than silently hide them.
This commit was sponsored by Graham Spencer on Patreon.
retrieveExport is part of ongoing transition to make remote methods
throw exceptions, rather than silently hide them.
getKey very rarely fails, and when it does it's always for the same reason
(user configured annex.backend to url for some reason). So, this will
avoid dealing with Nothing everywhere it's used.
This commit was sponsored by Ilya Shlyakhter on Patreon.
When storing content on remote fails, always display a reason why.
Since the Storer used by special remotes already did, this mostly affects
git remotes, but not entirely. For example, if git-lfs failed to connect to
the endpoint, it used to silently return False.
That had almost no benefit at all, and complicated things quite a lot.
What I proably wanted this to be was something like ResourceT, but it
was not. The few remotes that actually need some preparation done only
once and reused used a MVar and not Preparer.
Remaining things needing converted are in the assistant, and Annex.Ssh.
Every other remaining call to createDirectoryIfMissing True has been
audited and is not relevant. The ones in Build/ of course don't get
included in the program. Others included eg, Remote.Tahoe and
Config.Files which both write to dotfiles under the home directory.
Fix serious regression in gcrypt and encrypted git-lfs remotes.
Since version 7.20200202.7, git-annex incorrectly stored content
on those remotes without encrypting it.
Problem was, Remote.Git enumerates all git remotes, including git-lfs
and gcrypt. It then dispatches to those. So, Remote.List used the
RemoteConfigParser from Remote.Git, instead of from git-lfs or gcrypt,
and that parser does not know about encryption fields, so did not
include them in the ParsedRemoteConfig. (Also didn't include other
fields specific to those remotes, perhaps chunking etc also didn't
get through.)
To fix, had to move RemoteConfig parsing down into the generate methods
of each remote, rather than doing it in Remote.List.
And a consequence of that was that ParsedRemoteConfig had to change to
include the RemoteConfig that got parsed, so that testremote can
generate a new remote based on an existing remote.
(I would have rather fixed this just inside Remote.Git, but that was not
practical, at least not w/o re-doing work that Remote.List already did.
Big ugly mostly mechanical patch seemed preferable to making git-annex
slower.)
Needed so Remote.External can query the external program for its
configs. When the external program does not support the query,
the passthrough option will make all input fields be available.
This is a first step toward that goal, using the ProposedAccepted type
in RemoteConfig lets initremote/enableremote reject bad parameters that
were passed in a remote's configuration, while avoiding enableremote
rejecting bad parameters that have already been stored in remote.log
This does not eliminate every place where a remote config is parsed and a
default value is used if the parse false. But, I did fix several
things that expected foo=yes/no and so confusingly accepted foo=true but
treated it like foo=no. There are still some fields that are parsed with
yesNo but not not checked when initializing a remote, and there are other
fields that are parsed in other ways and not checked when initializing a
remote.
This also lays groundwork for rejecting unknown/typoed config keys.
Remove dup definitions and just use the RawFilePath one. </> etc are
enough faster that it's probably faster than building a String directly,
although I have not benchmarked.
git-annex find is now RawFilePath end to end, no string conversions.
So is git-annex get when it does not need to get anything.
So this is a major milestone on optimisation.
Benchmarks indicate around 30% speedup in both commands.
Probably many other performance improvements. All or nearly all places
where a file is statted use RawFilePath now.
Finally builds (oh the agoncy of making it build), but still very
unmergable, only Command.Find is included and lots of stuff is badly
hacked to make it compile.
Benchmarking vs master, this git-annex find is significantly faster!
Specifically:
num files old new speedup
48500 4.77 3.73 28%
12500 1.36 1.02 66%
20 0.075 0.074 0% (so startup time is unchanged)
That's without really finishing the optimization. Things still to do:
* Eliminate all the fromRawFilePath, toRawFilePath, encodeBS,
decodeBS conversions.
* Use versions of IO actions like getFileStatus that take a RawFilePath.
* Eliminate some Data.ByteString.Lazy.toStrict, which is a slow copy.
* Use ByteString for parsing git config to speed up startup.
It's likely several of those will speed up git-annex find further.
And other commands will certianly benefit even more.
This solves the problem of sameas remotes trampling over per-remote
state. Used for:
* per-remote state, of course
* per-remote metadata, also of course
* per-remote content identifiers, because two remote implementations
could in theory generate the same content identifier for two different
peices of content
While chunk logs are per-remote data, they don't use this, because the
number and size of chunks stored is a common property across sameas
remotes.
External special remote had a complication, where it was theoretically
possible for a remote to send SETSTATE or GETSTATE during INITREMOTE or
EXPORTSUPPORTED. Since the uuid of the remote is typically generate in
Remote.setup, it would only be possible to pass a Maybe
RemoteStateHandle into it, and it would otherwise have to construct its
own. Rather than go that route, I decided to send an ERROR in this case.
It seems unlikely that any existing external special remote will be
affected. They would have to make up a git-annex key, and set state for
some reason during INITREMOTE. I can imagine such a hack, but it doesn't
seem worth complicating the code in such an ugly way to support it.
Unfortunately, both TestRemote and Annex.Import needed the Remote
to have a new field added that holds its RemoteStateHandle.
Avoid a delay at startup when concurrency is enabled and there are
rsync or gcrypt special remotes, which was caused by git-annex
opening a ssh connection to the remote too early.
sshOptions makes a connection to the ssh server if one is not already open,
when concurrency is enabled. Avoid doing that at startup, when the remote
list is being built, but the remote may not be used at all.
Instead, rsync/gcrypt now runs sshOptions once per ssh connection to the
server. This should not be significant overhead since Remote.Git already
has the same overhead (as do Bup and Ddar).
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
Avoid a warning message when renameExport is not supported, and just
fallback to deleting with a subsequent re-upload. Especially needed for
importtree remotes, where renameExport needs to be disabled.
This changes the external special remote protocol, but in a
backwards-compatible way. A reply of UNSUPPORTED-REQUEST to an older
version of git-annex will cause it to make renameExport return False.
Purifying exportActions will allow introspecting and modifying it,
which is needed to add progress bar display to it.
Only S3 and WebDAV ran an Annex action while constructing ExportActions.
There was a small performance gain from them doing that, since a
resource was able to be prepared and reused for multiple actions by
Command.Export.
As seen in commit 809cfbbd8a and
5d394023eb S3 and WebDAV actually create a
new handle for each access in normal, non-export use. It doesn't seem
worth making export use of them marginally more efficient than normal
use. It would be better to do that work upfront when constructing the
remote. Or perhaps use a MVar to cache a handle.
This commit was sponsored by Nick Piper on Patreon.
