Note that it does not prevent storing p2p access tokens or multicast
encryption keys, since those are not cached; the previous commit
established the distinction.
How well this works depends on how often getRemoteCredPair is called and
how expensive it is. In some cases setting this will result in an annoying
number of gpg password prompts and/or slowdowns due to reading creds
from the git-annex branch and decrypting, which could be improved by calling
getRemoteCredPair less often.
This commit was sponsored by Ilya Shlyakhter on Patreon.
Install new git hooks in this version.
This does beg the question of what to do if git later gets eg a
post-smudge hook, that could run git-annex smudge --update. I think the
thing to do in that case would be to make git-annex smudge --update
install the new hooks. That way, as the user uses git-annex, the hook
would be created pretty quickly and without needing any extra syscalls
except for when git-annex smudge --update is called.
I considered doing something like that for installation of the
post-checkout and post-merge hooks, which would have avoided the need
for v7. But the only place it was cheap to do it would be in git-annex smudge
which could cheaply notice that smudge.log didn't exist yet and so know
the hooks needed to be installed. But since smudge used to populate pointer
files, it would be quite surprising if a single git checkout/merge failed
to update the work tree, and so that idea didn't work out.
The other reason for v7 is psychological -- users don't need to worry
about whether they might be running an old version of git-annex that
doesn't support their v7 repository very well. And bug reports about
"v6" have gotten a bit of a bad association in my head since they often
hit one of the known limitations and didn't realize it was experimental.
newtyped RepoVersion Int to avoid needing 2 comparisons in
versionSupportsUnlockedPointers etc. Also it's just nicer.
This commit was sponsored by John Pellman on Patreon.
Added annex.jobs setting, which is like using the -J option.
Of course, -J overrides annex.jobs.
This commit was sponsored by Trenton Cronholm on Patreon.
Added remote.name.annex-security-allow-unverified-downloads, a per-remote
setting for annex.security.allow-unverified-downloads.
This commit was sponsored by Brock Spratlen on Patreon.
Added annex.maxextensionlength for use cases where extensions longer than 4
characters are needed.
This commit was sponsored by Henrik Riomar on Patreon.
Added annex.commitmessage config that can specify a commit message for the
git-annex branch instead of the usual "update".
This commit was supported by the NSF-funded DataLad project.
Added remote.name.annex-speculate-present config that can be used to
make cache remotes.
Implemented it in Remote.keyPossibilities, which is used by the
get/move/copy/mirror commands, and nothing else. This way, things like
whereis will not show content that's speculatively present.
The assistant and sync --content were not using Remote.keyPossibilities,
and were changed to use it.
The efficiency hit should be small; Remote.keyPossibilities is only
used before transferring a file, which is the expensive operation.
And, it's only doing one lookup of the remoteList and a very cheap
filter over it.
Note that, git-annex still updates the location log when copying content
to a remote with annex-speculate-present set. In this case, the location
tracking will indicate that content is present in the remote. This may
not be wanted for caches, or may not be a real problem for them. TBD.
This commit was supported by the NSF-funded DataLad project.
Leveraged the existing verification code by making it also check the
retrievalSecurityPolicy.
Also, prevented getViaTmp from running the download action at all when the
retrievalSecurityPolicy is going to prevent verifying and so storing it.
Added annex.security.allow-unverified-downloads. A per-remote version
would be nice to have too, but would need more plumbing, so KISS.
(Bill the Cat reference not too over the top I hope. The point is to
make this something the user reads the documentation for before using.)
A few calls to verifyKeyContent and getViaTmp, that don't
involve downloads from remotes, have RetrievalAllKeysSecure hard-coded.
It was also hard-coded for P2P.Annex and Command.RecvKey,
to match the values of the corresponding remotes.
A few things use retrieveKeyFile/retrieveKeyFileCheap without going
through getViaTmp.
* Command.Fsck when downloading content from a remote to verify it.
That content does not get into the annex, so this is ok.
* Command.AddUrl when using a remote to download an url; this is new
content being added, so this is ok.
This commit was sponsored by Fernando Jimenez on Patreon.
They're no worse than http certianly. And, the backport of these
security fixes has to deal with wget, which supports http https and ftp
and has no way to turn off individual schemes, so this will make that
easier.
Security fix!
* git-annex will refuse to download content from http servers on
localhost, or any private IP addresses, to prevent accidental
exposure of internal data. This can be overridden with the
annex.security.allowed-http-addresses setting.
* Since curl's interface does not have a way to prevent it from accessing
localhost or private IP addresses, curl defaults to not being used
for url downloads, even if annex.web-options enabled it before.
Only when annex.security.allowed-http-addresses=all will curl be used.
Since S3 and WebDav use the Manager, the same policies apply to them too.
youtube-dl is not handled yet, and a http proxy configuration can bypass
these checks too. Those cases are still TBD.
This commit was sponsored by Jeff Goeke-Smith on Patreon.
Security fix! Allowing any schemes, particularly file: and
possibly others like scp: allowed file exfiltration by anyone who had
write access to the git repository, since they could add an annexed file
using such an url, or using an url that redirected to such an url,
and wait for the victim to get it into their repository and send them a copy.
* Added annex.security.allowed-url-schemes setting, which defaults
to only allowing http and https URLs. Note especially that file:/
is no longer enabled by default.
* Removed annex.web-download-command, since its interface does not allow
supporting annex.security.allowed-url-schemes across redirects.
If you used this setting, you may want to instead use annex.web-options
to pass options to curl.
With annex.web-download-command removed, nearly all url accesses in
git-annex are made via Utility.Url via http-client or curl. http-client
only supports http and https, so no problem there.
(Disabling one and not the other is not implemented.)
Used curl --proto to limit the allowed url schemes.
Note that this will cause git annex fsck --from web to mark files using
a disallowed url scheme as not being present in the web. That seems
acceptable; fsck --from web also does that when a web server is not available.
youtube-dl already disabled file: itself (probably for similar
reasons). The scheme check was also added to youtube-dl urls for
completeness, although that check won't catch any redirects it might
follow. But youtube-dl goes off and does its own thing with other
protocols anyway, so that's fine.
Special remotes that support other domain-specific url schemes are not
affected by this change. In the bittorrent remote, aria2c can still
download magnet: links. The download of the .torrent file is
otherwise now limited by annex.security.allowed-url-schemes.
This does not address any external special remotes that might download
an url themselves. Current thinking is all external special remotes will
need to be audited for this problem, although many of them will use
http libraries that only support http and not curl's menagarie.
The related problem of accessing private localhost and LAN urls is not
addressed by this commit.
This commit was sponsored by Brett Eisenberg on Patreon.
In keyUrls, the GitConfig is used only by annexLocations
to support configured Differences. Since such configurations affect all
clones of a repository, the local repo's GitConfig must have the same
information as the remote's GitConfig would have. So, used getGitConfig
to get the local GitConfig, which is cached and so available cheaply.
That actually fixed a bug noone had ever noticed: keyUrls is
used for remotes accessed over http. The full git config of such a
remote is normally not available, so the remoteGitConfig that keyUrls
used would not have the necessary information in it.
In copyFromRemoteCheap', it uses gitAnnexLocation,
which does need the GitConfig of the remote repo itself in order to
check if it's crippled, supports symlinks, etc. So, made the
State include that GitConfig, cached. The use of gitAnnexLocation is
within a (not $ Git.repoIsUrl repo) guard, so it's local, and so
its git config will always be read and available.
(Note that gitAnnexLocation in turn calls annexLocations, so the
Differences config it uses in this case comes from the remote repo's
GitConfig and not from the local repo's GitConfig. As explained above
this is ok since they must have the same value.)
Not very happy with this mess of different GitConfigs not type-safe and
some read only sometimes etc. Very hairy. Think I got it this change
right. Test suite passes..
This commit was sponsored by Ethan Aubin.
git annex testremote passes.
exportree not implemented yet, although the documentation talks about it,
since it will be the main way this remote will be used.
The adb push/pull progress is displayed for now; it would be better
to consume it and use it to update the git-annex progress bar.
This commit was sponsored by andrea rota.
Added annex.merge-annex-branches config setting which can be used to
disable automatic merge of git-annex branches.
I wonder if git-annex merge/sync/assistant should disable this
setting? Not sure yet, so have not done so. May be that users will not set
it in git config, but pass it via -c to commands that need it.
Checking the config setting adds a very small overhead, but it's
only checked once per command so should be insignificant.
This commit was supported by the NSF-funded DataLad project.
Added remote.<name>.annex-checkuuid config, which can be set to false to
disable the default checking of the uuid of remotes that point to
directories. This can be useful to avoid unncessary drive spin-ups and
automounting.
Note that the UUID check is still done before writing to the repository,
to avoid writing to the wrong repository if it got relocated. Check is
also done before checkPresent to avoid getting confused about what is in
which repo. This is effectively the same as the use of git-annex-shell
with a uuid to check that the remote repository is the expected one.
Did not bother with the check for retrieveKeyFile because it doesn't
matter if the wrong repo is used then.
This commit was sponsored by Trenton Cronholm on Patreon.
Including resuming and cleanup of incomplete downloads.
Still todo: --fast, --relaxed, importfeed, disk reserve checking,
quvi code cleanup.
This commit was sponsored by Anthony DeRobertis on Patreon.
Added remote configuration settings annex-ignore-command and
annex-sync-command, which are dynamic equivilants of the annex-ignore
and annex-sync configurations.
For this I needed a new DynamicConfig infrastructure. Its implementation
should be as fast as before when there is no dynamic config, and it caches
so shell commands are only run once.
Note that annex-ignore-command exits nonzero when the remote should be ignored.
While that may seem backwards, it allows using the same command for it as
for annex-sync-command when you want to disable both.
This commit was sponsored by Trenton Cronholm on Patreon.
* Added annex.resolvemerge configuration, which can be set to false to
disable the usual automatic merge conflict resolution done by git-annex
sync and the assistant.
* sync: Added --no-resolvemerge option.
Note that disabling merge conflict resolution is probably not a good idea
in a direct mode repo or adjusted branch. Since updates to both are done
outside the usual work tree, if it fails the tree is not left in a
conflicted state, and it would be hard to manually resolve the conflict.
Still, made annex.resolvemerge be supported in those cases for consistency.
This commit was sponsored by Riku Voipio.
It takes a single key-value backend, rather than the unncessary and confusing list.
The old option still works if set.
Simplified some old old code too.
This commit was sponsored by Thomas Hochstein on Patreon.
The former can be useful to make remotes that don't get fully synced with
local changes, which comes up in a lot of situations.
The latter was mostly added for symmetry, but could be useful (though less
likely to be).
Implementing `remote.<name>.annex-pull` was a bit tricky, as there's no one
place where git-annex pulls/fetches from remotes. I audited all
instances of "fetch" and "pull". A few cases were left not checking this
config:
* Git.Repair can try to pull missing refs from a remote, and if the local
repo is corrupted, that seems a reasonable thing to do even though
the config would normally prevent it.
* Assistant.WebApp.Gpg and Remote.Gcrypt and Remote.Git do fetches
as part of the setup process of a remote. The config would probably not
be set then, and having the setup fail seems worse than honoring it if it
is already set.
I have not prevented all the code that does a "merge" from merging branches
from remotes with remote.<name>.annex-pull=false. That could perhaps
be done, but it would need a way to map from branch name to remote name,
and the way refspecs work makes that hard to get really correct. So if the
user fetches manually, the git-annex branch will get merged, for example.
Anther way of looking at/justifying this is that the setting is called
"annex-pull", not "annex-merge".
This commit was supported by the NSF-funded DataLad project.
Cryptographically secure hashes can be forced to be used in a repository,
by setting annex.securehashesonly. This does not prevent the git repository
from containing files with insecure hashes, but it does prevent the content
of such files from being pulled into .git/annex/objects from another
repository.
We want to make sure that at no point does git-annex accept content into
.git/annex/objects that is hashed with an insecure key. Here's how it
was done:
* .git/annex/objects/xx/yy/KEY/ is kept frozen, so nothing can be
written to it normally
* So every place that writes content must call, thawContent or modifyContent.
We can audit for these, and be sure we've considered all cases.
* The main functions are moveAnnex, and linkToAnnex; these were made to
check annex.securehashesonly, and are the main security boundary
for annex.securehashesonly.
* Most other calls to modifyContent deal with other files in the KEY
directory (inode cache etc). The other ones that mess with the content
are:
- Annex.Direct.toDirectGen, in which content already in the
annex directory is moved to the direct mode file, so not relevant.
- fix and lock, which don't add new content
- Command.ReKey.linkKey, which manually unlocks it to make a
copy.
* All other calls to thawContent appear safe.
Made moveAnnex return a Bool, so checked all callsites and made them
deal with a failure in appropriate ways.
linkToAnnex simply returns LinkAnnexFailed; all callsites already deal
with it failing in appropriate ways.
This commit was sponsored by Riku Voipio.
* Added post-recieve hook, which makes updateInstead work with direct
mode and adjusted branches.
* init: Set up the post-receive hook.
This commit was sponsored by Fernando Jimenez on Patreon.
.. which can be set to true to make git annex sync default to --content.
This may become the default at some point in the future.
As well as being configuable by git config, it can be configured by
git-annex config to control the default behavior in all clones of a
repository.
Had to add a separate --no-content switch to we can tell if it's been
explicitly set, and should override annex.synccontent. If --content was the
default, this complication would not be necessary.
This commit was sponsored by Jake Vosloo on Patreon.
... to control the default behavior in all clones of a repository.
This includes a new Configurable data type, so the GitConfig type indicates
which values can be configured this way.
The implementation should be quite efficient; the config log is only read
once, and only when a Configurable value has not already been set by
git-config.
Indeed, it would be nice in the future to extend this, so that git-config
is itself only read on demand. Some commands may not need to look at the
git configuration at all.
This commit was sponsored by Trenton Cronholm on Patreon.
The naming is unofrtunately not consistent, but the gnupg-options
were only used for encrypting, and it's too late to change that.
It would be nice to have a third setting that is always passed to gnupg,
but ~/.gnupg/options can be used to specify such global options when really
needed.
* add, addurl, import, importfeed: When in a v6 repository on a crippled
filesystem, add files unlocked.
* annex.addunlocked: New configuration setting, makes files always be
added unlocked. (v6 only)
Decided it's too scary to make v6 unlocked files have 1 copy by default,
but that should be available to those who need it. This is consistent with
git-annex not dropping unused content without --force, etc.
* Added annex.thin setting, which makes unlocked files in v6 repositories
be hard linked to their content, instead of a copy. This saves disk
space but means any modification of an unlocked file will lose the local
(and possibly only) copy of the old version.
* Enable annex.thin by default on upgrade from direct mode to v6, since
direct mode made the same tradeoff.
* fix: Adjusts unlocked files as configured by annex.thin.
* When annex objects are received into git repositories, their checksums are
verified then too.
* To get the old, faster, behavior of not verifying checksums, set
annex.verify=false, or remote.<name>.annex-verify=false.
* setkey, rekey: These commands also now verify that the provided file
matches the key, unless annex.verify=false.
* reinject: Already verified content; this can now be disabled by
setting annex.verify=false.
recvkey and reinject already did verification, so removed now duplicate
code from them. fsck still does its own verification, which is ok since it
does not use getViaTmp, so verification doesn't happen twice when using fsck
--from.
When gpg.program is configured, it's used to get the command to run for
gpg. Useful on systems that have only a gpg2 command or want to use it
instead of the gpg command.
* init: Repository tuning parameters can now be passed when initializing a
repository for the first time. For details, see
http://git-annex.branchable.com/tuning/
* merge: Refuse to merge changes from a git-annex branch of a repo
that has been tuned in incompatable ways.
addurl behavior change: When downloading an url ending in .torrent,
it will download files from bittorrent, instead of the old behavior
of adding the torrent file to the repository.
Added Recommends on aria2 and bittornado | bittorrent.
This commit was sponsored by Asbjørn Sloth Tønnesen.
* New annex.hardlink setting. Closes: #758593
* init: Automatically detect when a repository was cloned with --shared,
and set annex.hardlink=true, as well as marking the repository as
untrusted.
Had to reorganize Logs.Trust a bit to avoid a cycle between it and
Annex.Init.
It is useful to be able to specify an alternative git-annex-shell
program to execute on the remote, e.g., to run a version not on the
PATH. Use remote.<name>.annex-shell if specified, instead of the
default "git-annex-shell" i.e., first so-named executable on the
PATH.
