New config annex.stalldetection, remote.name.annex-stalldetection, which
can be used to deal with remotes that stall during transfers, or are
sometimes too slow to want to use.
This commit was sponsored by Luke Shumaker on Patreon.
This old code will now be useful for git-annex beyond the assistant.
git-annex won't use the CheckTransferrer part, and won't run transferkeys
as a batch process, and will want withTransferrer to not shut down
transferkeys processes. Still, the rest of this is a good fit for what I
need now.
Also removed some dead code, and simplified a little bit.
This commit was sponsored by Mark Reidenbach on Patreon.
Any given transfer can only display 1 progress meter at a time, or so
this code assumes. In some cases, there are progress meters for
different stages of a transfer, perhaps, and that is supported by this.
This commit was sponsored by Ethan Aubin.
Added annex.adjustedbranchrefresh git config to update adjusted branches
set up by git-annex adjust --unlock-present/--hide-missing.
Note, in a few cases, I was not able to make the adjusted branch
be updated in calls to moveAnnex, because information about what
file corresponds to a key is not available. They are:
* If two files point to one file, then eg, `git annex get foo` will
update the branch to unlock foo, but will not unlock bar, because it
does not know about it. Might be fixable by making `git annex get
bar` do something besides skipping bar?
* git-annex-shell recvkey likewise (so sends over ssh from old versions
of git-annex)
* git-annex setkey
* git-annex transferkey if the user does not use --file
* git-annex multicast sends keys with no associated file info
Doing a single full refresh at the end, after any incremental refresh,
will deal with those edge cases.
This will let a module that Annex.Content imports use inAnnex.
Unsure yet if I will need that, but this split still seems to make
sense, and Annex.Content was way too long so splitting it is good.
All properties changed to use them, except for
prop_encode_c_decode_c_roundtrip, which already filtered to ascii
for other reasons.
A few modules had to be split out, because Setup does not build-depend
on QuickCheck.
Had to split out some modules because getWorkingDirectory needs unix,
which is not a build-dep of configure.
This commit was sponsored by Brock Spratlen on Patreon.
John Thorvald Wodder II got it working using
https://github.com/datalad/file-windows so don't hard-disable it.
The stack.yaml still disables this build flag, because it needs an extra
C library to be installed, which stack cannot automate.
When I put in Haskell98 this spring, I was under the mistaken
apprehension that ghc defaulted to that. But it actually its default
is a third mode, which is closer to Haskell2010 but with some differences.
The manual says "By default, GHC mainly aims to behave (mostly) like a
Haskell 2010 compiler"
Fixed two cases where the Haskell98 do indentation flexability let
wrongly indented code build. That is one of the places where
ghc does not behave like Haskell2010 by default.
The other place that I think I was concerned about, is GHC manual
section 19.1.1.3. Expressions and patterns. But that only seems to
affect code using bottoms, so would only affect pure functions throwing
an error, which I don't think git-annex does in many places as it's
pretty horrid style. And it would only affect rare cases like shown in
that section. If it did happen, it would mean that the error was not
thrown before specifying Haskell98, and then was. Haskell2010 behaves
the same as Haskell98.
This commit was sponsored by Denis Dzyubenko on Patreon.
Only turning it off when the criterion library is not installed.
Not enabled for osx or i386ancient yet since that will need some
invesitgation to update their respective stack.yaml files.
So these special remotes are always supported.
IIRC these build flags were added because the dep chains were a bit too
long, or perhaps because the libraries were not available in Debian stable,
or something like that. That was long ago, those reasons no longer apply,
and users get confused when builtin special remotes are not available, so
it seems best to remove the build flags now.
If this does cause a problem it can be reverted of course..
This commit was sponsored by Jochen Bartl on Patreon.
"http" was too generic and easy to confuse with web. The new name makes
clear it's used in addition to some other remote. And other protocols
can use the same naming scheme.
This adds a dep on hashable, but it's a free dependency, since
unordered-containers already pulled it in.
Using unordered-containers for the set seems to make sense, since it
hashes and bloom filter hashes too. (Though different hashes.)
I dunno, never quite know if I should use unordered-containers or containers.
Otherwise use the vendored copy as before.
The library is in Debian testing but not stable. Once it reaches
stable, the vendored copy can be removed.
Did not add it to debian/control because IIRC that's used to build
git-annex on stable too, possibly. However, the Debian maintainer will
probably want to make the package depend on libghc-http-client-restricted-dev
This commit was sponsored by Ilya Shlyakhter on Patreon.
Otherwise use the vendored copy as before.
The library is in Debian testing but not stable. Once it reaches
stable, the vendored copy can be removed.
Did not add it to debian/control because IIRC that's used to build
git-annex on stable too, possibly. However, the Debian maintainer will
probably want to make the package depend on libghc-git-lfs-dev.
This commit was sponsored by Ilya Shlyakhter on Patreon.
Network.HTTP.Client exports makeConnection since 0.5.3.
Debian stable has a newer version than 0.5.3, so bumping the
min version seems better than adding an ifdef.
Remove old code that can be trivially implemented using async in a much
nicer way (that is async exception safe).
I've audited all forkOS calls (except for ones in the assistant),
and this was the last remaining one that is not async exception safe.
The rest look ok to me.
Try to enable special remotes configured with autoenable=yes when git-annex
auto-initialization happens in a new clone of an existing repo. Previously,
git-annex init had to be explicitly run to enable them. That was a bit of a
wart of a special case for users to need to keep in mind.
Special remotes cannot display anything when autoenabled this way, to avoid
interfering with the output of git-annex query commands.
Any error messages will be hidden, and if it fails, nothing is displayed.
The user will realize the remote isn't enable when they try to use it,
and can run git-annex init manually then to try the autoenable again and
see what failed.
That seems like a reasonable approach, and it's less complicated than
communicating something across a pipe in order to display it as a side
message. Other reason not to do that is that, if the first command the
user runs is one like git-annex find that has machine readable output,
any message about autoenable failing would need to not be displayed anyway.
So better to not display a failure message ever, for consistency.
(Had to split out Remote.List.Util to avoid an import cycle.)
* addurl --preserve-filename: New option, uses server-provided filename
without any sanitization, but with some security checking.
Not yet implemented for remotes other than the web.
* addurl, importfeed: Avoid adding filenames with leading '.', instead
it will be replaced with '_'.
This might be considered a security fix, but a CVE seems unwattanted.
It was possible for addurl to create a dotfile, which could change
behavior of some program. It was also possible for a web server to say
the file name was ".git" or "foo/.git". That would not overrwrite the
.git directory, but would cause addurl to fail; of course git won't
add "foo/.git".
sanitizeFilePath is too opinionated to remain in Utility, so moved it.
The changes to mkSafeFilePath are because it used sanitizeFilePath.
In particular:
isDrive will never succeed, because "c:" gets munged to "c_"
".." gets sanitized now
".git" gets sanitized now
It will never be null, because sanitizeFilePath keeps the length
the same, and splitDirectories never returns a null path.
Also, on the off chance a web server suggests a filename of "",
ignore that, rather than trying to save to such a filename, which would
fail in some way.
Extensions got renamed.
Default-Language is required. I had to put Haskell98 because there are
subtle differences between 98 and 2010 and git-annex has always been
built with the default, which was 98 when there was a default. I don't
know how to establish that git-annex will behave the same under 2010.
Avoid running a large number of git cat-file child processes when run with
a large -J value.
This implementation takes care to avoid adding any overhead to git-annex
when run without -J. When run with -J, there is a small bit of added
overhead, to manipulate the resource pool. That optimisation added a
fair bit of complexity.
This does mean that RemoteDaemon.Transport.Tor's call runs it, otherwise
no change, but this is groundwork for doing more such expensive actions
in dupState.
This was very susprising to me that it was not caught by -Wall, so I
enabled -Wincomplete-uni-patterns to catch such things. It found a
second one just lines above, but no others anywhere.
Remote now contains a ParsedRemoteConfig. The parsing happens when the
Remote is constructed, rather than when individual configs are used.
This is more efficient, and it lets initremote/enableremote
reject configs that have unknown fields or unparsable values.
It also allows for improved type safety, as shown in
Remote.Helper.Encryptable where things that used to match on string
configs now match on data types.
This is a work in progress, it does not build yet.
The main risk in this conversion is forgetting to add a field to
RemoteConfigParser. That will prevent using that field with
initremote/enableremote, and will prevent remotes that already are set
up from seeing that configuration. So will need to check carefully that
every field that getRemoteConfigValue is called on has been added to
RemoteConfigParser.
(One such case I need to remember is that credPairRemoteField needs to be
included in the RemoteConfigParser.)
This is a first step toward that goal, using the ProposedAccepted type
in RemoteConfig lets initremote/enableremote reject bad parameters that
were passed in a remote's configuration, while avoiding enableremote
rejecting bad parameters that have already been stored in remote.log
This does not eliminate every place where a remote config is parsed and a
default value is used if the parse false. But, I did fix several
things that expected foo=yes/no and so confusingly accepted foo=true but
treated it like foo=no. There are still some fields that are parsed with
yesNo but not not checked when initializing a remote, and there are other
fields that are parsed in other ways and not checked when initializing a
remote.
This also lays groundwork for rejecting unknown/typoed config keys.
Adds a dependency on filepath-bytestring, an as yet unreleased fork of
filepath that operates on RawFilePath.
Git.Repo also changed to use RawFilePath for the path to the repo.
This does eliminate some RawFilePath -> FilePath -> RawFilePath
conversions. And filepath-bytestring's </> is probably faster.
But I don't expect a major performance improvement from this.
This is mostly groundwork for making Annex.Location use RawFilePath,
which will allow for a conversion-free pipleline.
Since the sqlite branch uses blobs extensively, there are some
performance benefits, ByteStrings now get stored and retrieved w/o
conversion in some cases like in Database.Export.
File mode is octal not decimal. This broke in the conversion to
attoparsec.
(I've submitted the content of Utility.Attoparsec to the attoparsec
developers.)
Test suite passes 100% now.
Finally builds (oh the agoncy of making it build), but still very
unmergable, only Command.Find is included and lots of stuff is badly
hacked to make it compile.
Benchmarking vs master, this git-annex find is significantly faster!
Specifically:
num files old new speedup
48500 4.77 3.73 28%
12500 1.36 1.02 66%
20 0.075 0.074 0% (so startup time is unchanged)
That's without really finishing the optimization. Things still to do:
* Eliminate all the fromRawFilePath, toRawFilePath, encodeBS,
decodeBS conversions.
* Use versions of IO actions like getFileStatus that take a RawFilePath.
* Eliminate some Data.ByteString.Lazy.toStrict, which is a slow copy.
* Use ByteString for parsing git config to speed up startup.
It's likely several of those will speed up git-annex find further.
And other commands will certianly benefit even more.
Goal is to make git-annex faster by using ByteString for all the
worktree traversal. For now, this is focusing on Command.Find,
in order to benchmark how much it helps. (All other commands are
temporarily disabled)
Currently in a very bad unbuildable in-between state.
Renamed the database to .git/annex/keysdb;
the old .git/annex/keys gets deleted during the upgrade.
It is possible that an old git-annex process is running during the
upgrade. If so, it will be able to continue using the old keys db until the
upgrade is complete, and then will presumably fail in some ugly way. Or
perhaps the upgrade will be unable to delete the open files on some
systems, and so fail with an ugly error message.
It's also possible for multiple processes to be running the upgrade
concurrently. That should be fine; they will both write the same
information into the keys db.
Other databases still need to be upgraded.
Rescued from commit 11d6e2e260 which removed
db benchmarks in favor of benchmarking arbitrary git-annex commands. Which
is nice and general, but microbenchmarks are useful too.
It would have been a lot less round-about to just make git annex dead
also add the uuids of sameas remotes to the trust.log as dead.
But, that would fail in the case where there's an unmerged other clone
that has a sameas remote that the current repo does not know about.
Then it would not get marked as dead.
Handling it at transition time avoids that scenario.
Note that the generation of trustmap' in dropDead should only
happen once, due to the partial application.
This solves the problem of sameas remotes trampling over per-remote
state. Used for:
* per-remote state, of course
* per-remote metadata, also of course
* per-remote content identifiers, because two remote implementations
could in theory generate the same content identifier for two different
peices of content
While chunk logs are per-remote data, they don't use this, because the
number and size of chunks stored is a common property across sameas
remotes.
External special remote had a complication, where it was theoretically
possible for a remote to send SETSTATE or GETSTATE during INITREMOTE or
EXPORTSUPPORTED. Since the uuid of the remote is typically generate in
Remote.setup, it would only be possible to pass a Maybe
RemoteStateHandle into it, and it would otherwise have to construct its
own. Rather than go that route, I decided to send an ERROR in this case.
It seems unlikely that any existing external special remote will be
affected. They would have to make up a git-annex key, and set state for
some reason during INITREMOTE. I can imagine such a hack, but it doesn't
seem worth complicating the code in such an ugly way to support it.
Unfortunately, both TestRemote and Annex.Import needed the Remote
to have a new field added that holds its RemoteStateHandle.
I found a way to avoid inheritance complicating anything outside of
Logs.Remote. It seems fine to require all inherited values to be
inherited and not set in the sameas remote's config. Since inherited
values will be used for stuff like encryption and perhaps chunking, which
control the actual content stored on the remote, it seems likely that
there will not be any reason to need them to vary between two remotes
that access the same underlying data store.
The newer version of containers is free; the minimum ghc version is
bundled with a newer version than that.
Initremote sets that, so after both initremote and enableremote,
the git config will be set.
Any remote that does not use Annex.SpecialRemote won't set
annex-config-uuid. But that's only Remote.Git, which doesn't use
RemoteConfig anyway.
Had a report of close throwing ErrorBusy on CIFS.
Retrying up to 16 seconds is a balance between hopefully waiting long
enough for the problem to clear up and waiting so long that git-annex seems
to hang.
The new dependency is free; persistent depends on unliftio-core.
This is a special remote and a git remote at the same time; git can pull
and push to it and git-annex can use it as a special remote.
Remote.Git has to check if it's configured as a git-lfs special remote
and sets it up as one if so.
Object methods not implemented yet.
In 40ecf58d4b I changed the license of code I
wrote from GPL to AGPL. But, two files containing code I wrote combined
with code by others were updated to say their license is AGPL, while in
fact part of it was (the code I wrote) but part remained under the original
license (the code written by others).
Remote/Ddar.hs is now changed entirely back to GPL 3.
Annex/DirHashes.hs stays AGPL, but I broke out Utility/MD5.hs with the code
not written by me, and corrected its license statement to GPL-2, which
is the actual version of the GPL included with the code in its original
distribution at http://www.cs.ox.ac.uk/people/ian.lynagh/md5/
Drop support for building with ghc older than 8.4.4, and with older
versions of serveral haskell libraries than will be included in Debian 10.
The only remaining version ifdefs in the entire code base are now a couple
for aws!
This commit should only be merged after the Debian 10 release.
And perhaps it will need to wait longer than that; it would make
backporting new versions of git-annex to Debian 9 (stretch) which
has been actively happening as recently as this year.
This commit was sponsored by Ilya Shlyakhter.
The hash was actually not being fully evaluated before, used rnf to fix
that.
The added dependency on deepseq is a free dependency, because eg text
depends on it.
* Added mimeencoding= term to annex.largefiles expressions.
This is probably mostly useful to match non-text files with eg
"mimeencoding=binary"
* git-annex matchexpression: Added --mimeencoding option.
Added graftTree but it's buggy.
Should use graftTree in Annex.Branch.graftTreeish; it will be faster
than the current implementation there.
Started Annex.Import, but untested and it doesn't yet handle tree
grafting.
Does not yet have a way to update with new information from the
git-annex branch, which will be needed when multiple repos are importing
from the same remote.
List all current AGPL files in COPYRIGHT; several that were GPL have had
new AGPL code added.
In git-annex.cabal, use AGPL-3 as the overall license, since it's not
possible to build git-annex without AGPL code anymore.
Like with the network-uri split, cabal will automatically turn off the flag
when building with an old network.
I have not tested building with the new network-3.0.0.0 yet; several
other dependencies including aws are still pinned on network-2.*
* webapp: Remove configurator for box.com repository, since their
webdav support is going away at the end of this January.
* webapp: Remove configurator for gitlab, which stopped supporting git-annex
some time ago.
This commit was sponsored by Brock Spratlen on Patreon.
* Switch to using .git/annex/othertmp for tmp files other than partial
downloads, and make stale files left in that directory when git-annex
is interrupted be cleaned up promptly by subsequent git-annex processes.
* The .git/annex/misctmp directory is no longer used and git-annex will
delete anything lingering in there after it's 1 week old.
Also, in Annex.Ingest, made the filename it uses in the tmp dir be
prefixed with "ingest-" to avoid potentially using a filename used by
some other code.
Now there's a ByteString used all the way from disk to Key.
The main complication in this conversion was the use of fromInternalGitPath
in several places to munge things on Windows. The things that used that
were changed to parse the ByteString using either path separator.
Also some code that had read from files to a String lazily was changed
to read a minimal strict ByteString.
Install new git hooks in this version.
This does beg the question of what to do if git later gets eg a
post-smudge hook, that could run git-annex smudge --update. I think the
thing to do in that case would be to make git-annex smudge --update
install the new hooks. That way, as the user uses git-annex, the hook
would be created pretty quickly and without needing any extra syscalls
except for when git-annex smudge --update is called.
I considered doing something like that for installation of the
post-checkout and post-merge hooks, which would have avoided the need
for v7. But the only place it was cheap to do it would be in git-annex smudge
which could cheaply notice that smudge.log didn't exist yet and so know
the hooks needed to be installed. But since smudge used to populate pointer
files, it would be quite surprising if a single git checkout/merge failed
to update the work tree, and so that idea didn't work out.
The other reason for v7 is psychological -- users don't need to worry
about whether they might be running an old version of git-annex that
doesn't support their v7 repository very well. And bug reports about
"v6" have gotten a bit of a bad association in my head since they often
hit one of the known limitations and didn't realize it was experimental.
newtyped RepoVersion Int to avoid needing 2 comparisons in
versionSupportsUnlockedPointers etc. Also it's just nicer.
This commit was sponsored by John Pellman on Patreon.
The smuge filter no longer provides git with annexed file content, to
avoid a git memory leak, and because that did not honor annex.thin.
git annex smudge --update has to be run after a checkout to update
unlocked files in the working tree with annexed file contents.
No hooks yet to run it.
This commit was sponsored by Nick Piper on Patreon.
Both Command.Sync and Annex.Ingest had their own versions of this.
The one in Annex.Ingest used Git.Branch.currentUnsafe, but does not seem
to need it. That is only checking to see if it's in an adjusted unlocked
branch, and when in an adjusted branch, the branch does in fact exist,
so the added check that Git.Branch.current does is fine.
This commit was sponsored by Denis Dzyubenko on Patreon.
Running git-annex linux builds in termux seems to work well enough that the
only reason to keep the Android app would be to support Android 4-5, which
the old Android app supported, and which I don't know if the termux method
works on (although I see no reason why it would not).
According to [1], Android 4-5 remains on around 29% of devices, down from
51% one year ago.
[1] https://www.statista.com/statistics/271774/share-of-android-platforms-on-mobile-devices-with-android-os/
This is a rather large commit, but mostly very straightfoward removal of
android ifdefs and patches and associated cruft.
Also, removed support for building with very old ghc < 8.0.1, and with
yesod < 1.4.3, and without concurrent-output, which were only being used
by the cross build.
Some documentation specific to the Android app (screenshots etc) needs
to be updated still.
This commit was sponsored by Brett Eisenberg on Patreon.
In 2013, I wrote "Cryptohash benchmarks 90 to 101% faster than external
hashers". Re-benchmarking today, I found cryptonite's sha256 consistently
outperformed coreutils by 10% for large files. Tested 10 mb, 100 mb, 1 gb
files with both sha256 and sha512. And for smaller files, the external
process startup time swamps the hash time.
Perhaps cryptonite has improved. Or it could just do better on my
current CPU Intel(R) Pentium(R) CPU 4410Y @ 1.50GHz). Anyway, even if cryptonite
is slower in some situations, seems likely it would only be marginally slower;
it's got the same class of highly optimised C code under the hood as coreutils.
The main difference between the two sha256 implementations seems to be
how much of the inner loop they unroll..
This commit was sponsored by Henrik Riomar on Patreon.
Avoids annex.largefiles inconsitency and also avoids a lot of
unneccessary calls to the clean filter when a large repo's clone
is being initialized.
This commit was supported by the NSF-funded DataLad project.
Git uses pkt-line in the pack and http protocols, and for the long-running
filter processes protocol as well.
This should be a quite efficient parser and builder since it uses
attoparsec and bytestring-builder.
This adds a dependency on attoparsec, but it's a free dependency because
eg aeson depends on attoparsec and git-annex depends on aeson.
This commit was supported by the NSF-funded DataLad project.
per Peter Simons:
Setup.hs depends on 'transformers' for versions of base
prior to 4.9.x so that Control.Monad.IO.Class can be included. Just
adding the library to 'setup-depends' fixes the build with older
compilers like GHC 7.10.3.
For use in a security boundary enforcement.
Based on https://en.wikipedia.org/wiki/Reserved_IP_addresses
Including supporting IPv4 addresses embedded in IPv6 addresses. Because
while RFC6052 3.1 says "Address translators MUST NOT translate packets
in which an address is composed of the Well-Known Prefix and a non-
global IPv4 address; they MUST drop these packets", I don't want to
trust that implementations get that right when enforcing a security
boundary.
This commit was sponsored by John Pellman on Patreon.
This is a clean way to add IP address restrictions to http-client, and
any library using it.
See https://github.com/snoyberg/http-client/issues/354#issuecomment-397830259
Some code from http-client and http-client-tls was copied in and
modified. Credited its author accordingly, and used the same MIT license.
The restrictions don't apply to http proxies. If using http proxies is a
problem, http-client already has a way to disable them.
SOCKS support is not included. As far as I can tell, http-client-tls
does not support SOCKS by default, and so git-annex never has.
The additional dependencies are free; git-annex already transitively
depended on them via http-conduit.
This commit was sponsored by Eric Drechsel on Patreon.
As long as all code imports Utility.Aeson rather than Data.Aeson,
and no Strings that may contain utf-8 characters are used for eg, object
keys via T.pack, this is guaranteed to fix the problem everywhere that
git-annex generates json.
It's kind of annoying to need to wrap ToJSON with a ToJSON', especially
since every data type that has a ToJSON instance has to be ported over.
However, that only took 50 lines of code, which is worth it to ensure full
coverage. I initially tried an alternative approach of a newtype FileEncoded,
which had to be used everywhere a String was fed into aeson, and chasing
down all the sites would have been far too hard. Did consider creating an
intentionally overlapping instance ToJSON String, and letting ghc fail
to build anything that passed in a String, but am not sure that wouldn't
pollute some library that git-annex depends on that happens to use ToJSON
String internally.
This commit was supported by the NSF-funded DataLad project.
Remote.S3 and Remote.Helper.Http both had similar code to sink a
http-conduit Response to a file; refactor out sinkResponseFile.
downloadC downloads an url to a file using http-conduit, and supports
resuming. Falls back to curl to handle urls that http-conduit does not
support. This is not used yet, but the goal is to replace download with
it.
git-annex.cabal: conduit-extra was not actually used for a long time,
remove the dep. conduit moves into the main dependency list, but since
http-conduit was already in there, and it depends on conduit, that's not
really adding a new build dep.
This commit was supported by the NSF-funded DataLad project.
git annex testremote passes.
exportree not implemented yet, although the documentation talks about it,
since it will be the main way this remote will be used.
The adb push/pull progress is displayed for now; it would be better
to consume it and use it to update the git-annex progress bar.
This commit was sponsored by andrea rota.
Some blake hash varieties were not yet available in that version.
Rather than tracking exact details of what cryptonite supported when,
disable blake unless using a current cryptonite.
There are a lot of different variants and sizes, I suppose we might as well
export all the common ones.
Bump dep to cryptonite to 0.16, earlier versions lacked BLAKE2 support.
Even android has 0.16 or newer.
On Debian, Blake2bp_512 is buggy, so I have omitted it for now.
http://bugs.debian.org/892855
This commit was sponsored by andrea rota.
Make a Remote.Helper.P2P using code that was in Remote.P2P, converted to
use generic protocol runner actions.
This will allow it to be reused in Remote.Git.
This commit was sponsored by mo on Patreon.
Not yet used by git-annex, but this will allow faster transfers etc than
using individual ssh connections and rsync.
Not called git-annex-shell p2p, because git-annex p2p does something
else and I don't want two subcommands with the same name between the two
for sanity reasons.
This commit was sponsored by Øyvind Andersen Holm.
Prevent ghc and llc from running out of memory when optimising some
files.
Sean Whitton reported that doing this only in Test.hs was insufficient,
the build still OOMed by the time it got to Test.hs. He had earlier found
the build worked when these options are applied globally.
See https://ghc.haskell.org/trac/ghc/ticket/14821 for why it needs -O1;
once that's fixed it may suffice to use "GHC-Options: -O2 -optlo-O2",
although it may also be that the -O1 prevents ghc from using/leaking
as much memory.
os(arm) should match armel, armhf, armeb, and arm.
It probably also matches arm64, somewhat unfortunately since arm64
systems probably tend to have more memory. See list of arches in
https://hackage.haskell.org/package/Cabal-1.22.2.0/docs/src/Distribution-System.html
This commit was sponsored by Henrik Riomar on Patreon.
The ghc options were found by Sean Whitton; the debian arm autobuilders
need those to build w/o OOM, and it seems to involve llvm using too much
memory to optimize Test.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
git grep writeFile finds some more that might also be problems, but
for now I've concentrated on .git/annex/ log files. There are certianly
cases where writeFile is not a problem too.
This commit was sponsored by mo on Patreon.
The problem with combining these is that Build.Standalone etc need only
the BuildInfo, and since not built with cabal, the BuildFlags ifdefs
were causing bogus warnings.
Fourth or fifth try at this and finally found a way to make it work.
Absurd amount of busy-work forced on me by change in cabal's behavior.
Split up Utility modules that need posix stuff out of ones used by
Setup. Various other hacks around inability for Setup to use anything
that ifdefs a use of unix.
Probably lost a full day of my life to this.
This is how build systems make their users hate them. Just saying.
This reverts commit 51228c2306.
No, still doesn't work when built with cabal. It did with stack; stack
must somehow make the unix package implicitly available.
With cabal, System.Posix.Process and System.Posix.Env are both missing.
Seems I had all the work in past commits to make this build, at least on
linux. I'm actually surprised it does, without a unix dep, Utility.Env
still builds ok somehow despite using System.Posix.Env.
This commit was sponsored by Fernando Jimenez on Patreon.
Chose to make this only handle files actively being downloaded, not temp
files for downloads that were interrupted or files that have been fully
downloaded.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Test suite is always included.
Building with this flag disabled has actually been broken for some time,
since Command.TestRemote uses tasty. Fewer build flags are better, so good
time to drop it.
This commit was sponsored by Thomas Hochstein on Patreon.
Fully working, including --fast/--relaxed.
Note that, while git-annex addurl --relaxed is not going to check
youtube-dl, I kept git annex importfeed --relaxed checking it.
Thinking is that, let's not break people's importfeed cron jobs, and
importfeed does not typically have to check a large number of new items,
so it's ok if it's a little bit slower when used with youtube playlist
feeds.
importfeed's behavior is also improved (?) when a feed has links in it
to non-media files. Before, those were skipped. Now, the content of the
link is downloaded. This had to be done, because trying to use
youtube-dl is slow, and if those were skipped, it would have to check
every time importfeed was run. While this behavior change may not be
desirable for some feeds, that intersperse links to web pages with
enclosures, it will be desirable for other feeds, that have
non-enclosure directy links to media files.
Remove old quvi modules.
This commit was sponsored by Øyvind Andersen Holm.
Including resuming and cleanup of incomplete downloads.
Still todo: --fast, --relaxed, importfeed, disk reserve checking,
quvi code cleanup.
This commit was sponsored by Anthony DeRobertis on Patreon.
This will be used in youtube-dl integration, to tell when a html page has
been downloaded by addurl, in which case it is worth running youtube-dl
to see if it can extract media from it.
tagsoup is an almost free dependency, because yesod depends on it.
So, this only really adds a dep when git-annex is built without the
webapp.
I'd like this to as closely as possible match how browsers decide if a
page is html or not. Unfortunately, that is fairly heuristic, in order
to support malformed html. And, we don't want to falsely detect
something as html just because it has something that looks like a html
tag embedded somewhere in it. Probably any major video hosting site is
going to be serving html documents that at least start with a <html>
tag, so requiring that or a DOCTYPE should be good enough.
This commit was sponsored by Jeff Goeke-Smith on Patreon.
Needs ghc 7.6.1, so minimum base version increased slightly. All builds
are well above this version of ghc, and debian oldstable is as well.
Code that could use lambdacase can be found by running:
git grep -B 1 'case ' | less
and searching in less for "<-"
This commit was sponsored by andrea rota.
They need unix on non-windows, for Utility.Env, which Build.Configure uses,
but cabal can't express that in a custom-setup stanza.
To avoid this problem, Utility.Env would need to be moved into
unix-compat..
Windows needs the setenv package in custom-setup, but I don't want to
pull it in on unix, which would probably break some builds and need more
work. Instead, split out setEnv to a separate module.
Quite likely, unix-compat will get a portable environment layer, and
then both modules can be removed from here.
This commit was sponsored by Øyvind Andersen Holm.
Now that windows is using unix-compat 0.5, don't need a dep on Win32
or unix in custom-setup, so the stanza can be parsed by cabal's limited
parser again.
Note that unix-compat 0.5 is needed on windows, but the cabal file
hasn't bumped it yet, since that would necessarily affect non-windows
builds. Instead, the stack-windows.yaml makes sure the right version is
pulled in.
This commit was sponsored by Jeff Goeke-Smith on Patreon.
That version has my patches for the problems that Utility.PosixFiles
was working around, so am able to get rid of that module now.
This will later allow bringing back the custom-setup stanza in the cabal
file. It will need to depend on unix-compat 0.5 on all OS's, which I'm
not ready to do yet.
This commit was sponsored by Nick Daly on Patreon.
Get ugly reversion out of CHANGELOG.
Also, relocated the windows stack.yaml to top, and updated windows build
instructions.
This commit was sponsored by Henrik Riomar on Patreon.
This reverts commit 839ec7e26c.
Neither way is working.. The other way failed:
.stack-work\dist\5f9bc736\build\git-annex\git-annex-tmp\Assistant.o:fake:(.text+0x6bb3): undefined reference to `terminatepid'
Seems that winprocess.c is not getting linked in.
Building with stack, it failed:
`_TerminateProcess' referenced in section `.text' of .stack-work\dist\5f9bc736\build\git-annex\git-annex-tmp\Utility\WinProcess.o: defined in discarded section `.text' of C:/Users/jenkins/AppData/Local/Programs/stack/i386-windows/ghc-8.0.2/mingw/bin/../lib/gcc/i686-w64-mingw32/5.2.0/../../../../i686-w64-mingw32/lib/../lib/libkernel32.a(dacgs01154.o)
This is a reversion of 86e638567a,
to try the other way to implement it, which will hopefully avoid the problem.
