Fix behavior of several commands, including reinject, addurl, and rmurl
when given an absolute path to an unlocked file, or a relative path that
leaves and re-enters the repository.
To avoid slowing down all the cases where the paths are already ok
with an unncessary call to getCurrentDirectory, put in an optimisation
in relPathCwdToFile. That will probably also speed up other parts of
git-annex by some small amount, but I have not benchmarked.
Note that I did not convert branchFileRef, because it seems likely that
it will be used with a file that is not provided by the user, so is already
in a sane format. This is certainly true for the way git-annex uses it,
though maybe arguable to the extent Git.Ref is a reusable library.
GHC was complaining about it possibly being a homoglyph:
Command/Multicast.hs:111:36: error:
warning: treating Unicode character <U+2212> as identifier character rather than as '-' symbol [-Wunicode-homoglyph]
-- using a nice prime, namely 2521−1 but the sheer size of this
^
|
111 | -- using a nice prime, namely 2521−1 but the sheer size of this
| ^
1 warning generated.
smudge: Fix a case where an unlocked annexed file that annex.largefiles
does not match could get its unchanged content checked into git, due to git
running the smudge filter unecessarily.
When the file has the same inodecache as an already annexed file,
we can assume that the user is not intending to change how it's stored in
git.
Note that checkunchangedgitfile already handled the inverse case, where the
file was added to git previously. That goes further and actually sha1
hashes the new file and checks if it's the same hash in the index.
It would be possible to generate a key for the file and see if it's the
same as the old key, however that could be considerably more expensive than
sha1 of a small file is, and it is not necessary for the case I have, at
least, where the file is not modified or touched, and so its inode will
match the cache.
fromkey: Create an unlocked file when used in an adjusted branch where the
file should be unlocked, or when configured by annex.addunlocked.
There is some overlap with code in Annex.Ingest, however it's not quite the
same because ingesting has a temp file with the content, where here the
content, if any, is in the annex object file. So it eg, makes sense for
Annex.Ingest to copy the execute mode of the content file, but it does not make
sense for fromkey to do that.
Also changed in passing to stage the file in git directly, rather than
using git add. One consequence of that is that if the file is gitignored,
it will still get added, rather than the old behavior:
The following paths are ignored by one of your .gitignore files:
ignored
hint: Use -f if you really want to add them.
hint: Turn this message off by running
hint: "git config advice.addIgnoredFile false"
git-annex: user error (xargs ["-0","git","--git-dir=.git","--work-tree=.","--literal-pathspecs","add","--"] exited 123)
That old behavior was a surprise to me, and so I consider it a bug, and doubt
anyone would have relied on it.
Note that, when on an --hide-missing branch, it is possible to fromkey a key
that is not present (needs --force). The annex link or pointer file still gets
written in this case. It doesn't seem to make any sense not to write it,
because then fromkey would not do anything useful in this case, and this way
the file can be committed and synced to master, and the branch re-adjusted to
hide the new missing file.
This commit was sponsored by Noam Kremen on Patreon.
* Fix bug that could make git-annex importfeed not see recently recorded
state when configured with annex.alwayscommit=false.
* importfeed: Made "checking known urls" phase run 12 times faster.
The massive speedup is because it no longer queries for metadata
accompanying each url. Instead it processes the whole git-annex branch and
checks all metadata files for feed item ids, and uses any it finds.
This could result in a behavior change, in an unlikely situation: If a feed
id is recorded in a key's metadata, but the url gets removed, the old code
would not see that item id and would re-download it if it finds an url for
it in a feed, while the new code will see the item id. I don't think
the old behavior was intentional, and it may be that the new behavior is
better. Not gonna worry about this.
This adds a separate journal, which does not currently get committed to
an index, but is planned to be committed to .git/annex/index-private.
Changes that are regarding a UUID that is private will get written to
this journal, and so will not be published into the git-annex branch.
All log writing should have been made to indicate the UUID it's
regarding, though I've not verified this yet.
Currently, no UUIDs are treated as private yet, a way to configure that
is needed.
The implementation is careful to not add any additional IO work when
privateUUIDsKnown is False. It will skip looking at the private journal
at all. So this should be free, or nearly so, unless the feature is
used. When it is used, all branch reads will be about twice as expensive.
It is very lucky -- or very prudent design -- that Annex.Branch.change
and maybeChange are the only ways to change a file on the branch,
and Annex.Branch.set is only internal use. That let Annex.Branch.get
always yield any private information that has been recorded, without
the risk that Annex.Branch.set might be called, with a non-private UUID,
and end up leaking the private information into the git-annex branch.
And, this relies on the way git-annex union merges the git-annex branch.
When reading a file, there can be a public and a private version, and
they are just concacenated together. That will be handled the same as if
there were two diverged git-annex branches that got union merged.
When downloading content from a remote, if the content is able to be
verified during the transfer, skip checksumming it a second time.
Note that in this case, the fsck output does not include "(checksum)"
which it does when the checksumming is done separately from the download.
This commit was sponsored by Brock Spratlen on Patreon.
This uses a DebugSelector, rather than debug levels, which will allow
for a later option like --debug-from=Process to only
see debuging about running processes.
The module name that contains the thing being debugged is used as the
DebugSelector (in most cases; does not need to be a hard and fast rule).
Debug calls were changed to add that. hslogger did not display
that first parameter to debugM, but the DebugSelector does get
displayed.
Also fastDebug will allow doing debugging in places that are used in
tight loops, with the DebugSelector coming from the Annex Reader
essentially for free. Not done yet.
Values in AnnexRead can be read more efficiently, without MVar overhead.
Only a few things have been moved into there, and the performance
increase so far is not likely to be noticable.
This is groundwork for putting more stuff in there, particularly a value
that indicates if debugging is enabled.
The obvious next step is to change option parsing to not run in the
Annex monad to set values in AnnexState, and instead return a pure value
that gets stored in AnnexRead.
Not yet used, but allows getting the size of items in the tree fairly
cheaply.
I noticed that CmdLine.Seek uses ls-tree and the feeds the files into
another long-running process to check their size. That would be an
example of a place that might be sped up by using this. Although in that
particular case, it only needs to know the size of unlocked files, not
locked. And since enabling --long probably doubles the ls-tree runtime
or more, the overhead of using it there may outwweigh the benefit.
I don't think this was really intentional behavior. It may be that it was
useful to include it so it could be passed to rmurl, since without it rmurl
would not actually remove the url. Since that was changed earlier today,
now seems like a good time to clean up the display of these urls.
This commit was sponsored by Jochen Bartl on Patreon.
fsck: When --from is used in combination with --all or similar options, do
not verify required content, which can't be checked properly when operating
on keys.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
unregisterurl: Fix a bug that caused an url to not be unregistered when it
is claimed by a special remote other than the web.
See commit f175d4cc90 for rationalle.
* rmurl: When youtube-dl was used for an url, it no longer needs to be
prefixed with "yt:" in order to be removed.
* rmurl: If an url is both used by the web and also claimed by another
special remote, fix a bug that caused the url to to not be removed.
The youtube-dl change is a consequence of how the bug fix is implemented.
But I also think it's the right thing to do. Consider that, before,
git-annex addurl $url followed by git-annex rmurl $url would not remove the
url in the case where youtube-dl was used. That was surprising behavior.
In the unlikely case where a special remote claims an url, and it's been
added using OtherDownloader, but it was also added already as a web url,
it seems better for rmurl to remove both than to arbitrarily remove only one.
And in the case the bug report was filed for, when an url was added as a
web url, but a special remote now claims it, that should not prevent rmurl
removing the web url.
Calling setUrlMissing lets other callers of it behave differently.
Probably the calls to it in eg, Remote.External and Remote.BitTorrent are
fine, since they don't mangle the url and just remove what was provided,
and the OtherDownloader form of a bittorrent url, respectively.
I suspect unregisterurl needs to have a similar change made to rmurl, for
similar reasons.
Like import was using ActionItemWorkTreeFile, it's ok to use it for export,
even though it might not correspond with a file in the work tree.
And renamed it to ActionItemTreeFile to make that clearer.
Note that when an export has to rename files, it still uses
ActionItemOther, so file will still be null in that case, but as no file is
being transferred, that seems ok.
import: When the previously exported tree contained a submodule,
preserve it in the imported tree so it does not get deleted.
The export exclude log, which was used for non-preferred content,
now also includes the submodules. Since the log format is git ls-tree
output, this does not break backwards compatibility.
It's not necessary to log location of GIT keys, because these files are
not annexed files and so git-annex will never need to get them.
This corresponds to code in Annex.Import that already checked before
updating the location log when handling deleted files.
Older versions of git-annex that used SHA1 keys for non-annexed files
also unncessarily updated the location log for them.
GIT keys still appear in the git-annex branch for content identifier
logs, so kept the documentation of them in backends.mdwn
This commit was sponsored by Jake Vosloo on Patreon.
This solves the problem that import of such files gets confused and
converts them back to annexed files.
The import code already used GIT keys internally when it determined a
file should not be annexed. So now when it sees a GIT key that export
used, it already does the right thing.
This also means that even older version of git-annex can import and will
do the right thing, once a fixed version has exported. Still, there may
be other complications around upgrades; still need to think it all
through.
Moved gitShaKey and keyGitSha from Key to Annex.Export since they're
only used for export/import.
Documented GIT keys in backends, since they do appear in the git-annex
branch now.
This commit was sponsored by Graham Spencer on Patreon.
Added LinkType to ProvidedInfo, and unified MatchingKey with
ProvidedInfo. They're both used in the same way, so there was no real
reason to keep separate.
Note that addLocked and addUnlocked still set matchNeedsFileName,
because to handle MatchingFile, they do need it. However, they
don't use it when MatchingInfo is provided. This should be ok,
the --branch case will be able skip checking matchNeedsFileName,
since it will provide a filename in any case.
Implemented by generalizing registerurl. Without the implicit batch mode
of registerurl since that is only a backwards compatability thing
(see commit 1d1054faa6).
unannex, uninit: When an annexed file is modified, don't overwrite the
modified version with an older version from the annex
This commit was sponsored by Mark Reidenbach on Patreon.
When a git remote is configured with an absolute path, use that path,
rather than making it relative. If it's configured with a relative path,
use that.
Git.Construct.fromPath changed to preserve the path as-is,
rather than making it absolute. And Annex.new changed to not
convert the path to relative. Instead, Git.CurrentRepo.get
generates a relative path.
A few things that used fromAbsPath unncessarily were changed in passing to
use fromPath instead. I'm seeing fromAbsPath as a security check,
while before it was being used in some cases when the path was
known absolute already. It may be that fromAbsPath is not really needed,
but only git-annex-shell uses it now, and I'm not 100% sure that there's
not some input that would cause a relative path to be used, opening a
security hole, without the security check. So left it as-is.
Test suite passes and strace shows the configured remote url is used
unchanged in the path into it. I can't be 100% sure there's not some code
somewhere that takes an absolute path to the repo and converts it to
relative and uses it, but it seems pretty unlikely that the code paths used
for a git remote would call such code. One place I know of is gitAnnexLink,
but I'm pretty sure that git remotes never deal with annex symlinks. If
that did get called, it generates a path relative to cwd, which would have
been wrong before this change as well, when operating on a remote.
When annex.stalldetection is not enabled, and a likely stall is detected,
display a suggestion to enable it.
Note that the progress meter display is not taken down when displaying
the message, so it will display like this:
0% 8 B 0 B/s
Transfer seems to have stalled. To handle stalling transfers, configure annex.stalldetection
0% 10 B 0 B/s
Although of course if it's really stalled, it will never update
again after the message. Taking down the progress meter and starting
a new one doesn't seem too necessary given how unusual this is,
also this does help show the state it was at when it stalled.
Use of uninterruptibleCancel here is ok, the thread it's canceling
only does STM transactions and sleeps. The annex thread that gets
forked off is separate to avoid it being canceled, so that it
can be joined back at the end.
A module cycle required moving from dupState the precaching of the
remote list. Doing it at startConcurrency should cover all the cases
where the remote list is used in concurrent actions.
This commit was sponsored by Kevin Mueller on Patreon.
Missed this when implementing it because of the default case catching
the new constructor. So, removed that default case to make sure
future types of adjusted branches don't make the same mistake.
Complicated by git-annex addurl --fast which adds the file whose content
is not present, so it needs to stay unlocked when on such a branch.
This commit was sponsored by Brock Spratlen on Patreon.
34a535ebea broke the test suite.
Getting a file started failing in one case, because the annex object did
not have its inode cached, so was not trusted to be unmodified.
This adds something very similar to what was added to linkAnnex
in commit 2e9341a47d -- if there are not
yet any inodes cached for a key, add the inode of the annex object when
adding the inode of the unlocked file.
Feels like this should be handled in a more principled way. How
do we know the addInodeCaches call in getMoveRaceRecovery just above
this change is currently correct? It doesn't add the annex object inode
cache. Ah well, maybe sometime when I've not had my entire evening eaten
by a reversion that the test suite caught as I was cooking dinner.
