The goal is to be able to run CommandStart in the main thread when -J is
used, rather than unncessarily passing it off to a worker thread, which
incurs overhead that is signficant when the CommandStart is going to
quickly decide to stop.
To do that, the message it displays needs to be displayed in the worker
thread, after the CommandStart has run.
Also, the change will mean that CommandStart will no longer necessarily
run with the same Annex state as CommandPerform. While its docs already
said it should avoid modifying Annex state, I audited all the
CommandStart code as part of the conversion. (Note that CommandSeek
already sometimes runs with a different Annex state, and that has not been
a source of any problems, so I am not too worried that this change will
lead to breakage going forward.)
The only modification of Annex state I found was it calling
allowMessages in some Commands that default to noMessages. Dealt with
that by adding a startCustomOutput and a startingUsualMessages.
This lets a command start with noMessages and then select the output it
wants for each CommandStart.
One bit of breakage: onlyActionOn has been removed from commands that used it.
The plan is that, since a StartMessage contains an ActionItem,
when a Key can be extracted from that, the parallel job runner can
run onlyActionOn' automatically. Then commands won't need to worry about
this detail. Future work.
Otherwise, this was a fairly straightforward process of making each
CommandStart compile again. Hopefully other behavior changes were mostly
avoided.
In a few cases, a command had a CommandStart that called a CommandPerform
that then called showStart multiple times. I have collapsed those
down to a single start action. The main command to perhaps suffer from it
is Command.Direct, which used to show a start for each file, and no
longer does.
Another minor behavior change is that some commands used showStart
before, but had an associated file and a Key available, so were changed
to ShowStart with an ActionItemAssociatedFile. That will not change the
normal output or behavior, but --json output will now include the key.
This should not break it for anyone using a real json parser.
Importing from a special remote honors its preferred content too; unwanted
files are not imported. But, some preferred content expressions can't be
checked before files are imported, and trying to import with such an
expression will fail.
Tested this with scenarios including changing the preferred content
expression and making sure merging the import didn't delete files that were
no longer wanted.
There was one minor inefficiency mentioned in the todo that I punted on.
Fixes bug that caused git-annex to fail to add a file when another
git-annex process cleaned up the temp directory it was using.
Solution is just to push withOtherTmp out to a higher level, so that
the whole ingest process can be completed inside it.
But in the assistant, that was not practical to do, since withOtherTmp runs
in the Annex monad and the assistant does not. Worked around by introducing
a separate temp directory that only the assistant uses for lockdown.
Since only one assistant can run at a time, it's easy to clean up that
directory of old cruft at startup.
This way no history is lost, neither what was exported to the remote,
or the history of changes that is imported from it. No complicated
correlation of two possibly very different histories is needed, just
record what we know and then git merge will do a good job.
Also, it notices when the remote tracking branch doesn't need to be updated,
and avoids doing anything, so noop remotes are super cheap.
The only catch here is that, since the commits generated for imports
from the remote don't have a stable date or author/committer, each
(non-noop) import generates different commits for the same imported
trees. So, when the imported remote tracking branch is merged into master
and then a change is imported again, there will be an extra series of
commits, which will get more and more expensive each time.
This seems to call for making stable commits for imports. Also that
seems a good idea to make importing in several repositories have the
same result.
Switch listContents to being a proper CommandStart, so if it throws an
exception, it will be treated like any other command action that fails.
downloadImport apparently does not ever throw an exception,
and itself uses commandAction, so it can't be a CommandStart.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
This works, and tested syncing both gets changes from a special remote
and sends changes to it, keeping it fully in sync nicely!
But have not tried it with a subdir configured.
Alternative doesn't combine the subparsers the way I wanted.
Unfortunately this new parser has suboptimal usage because everything is
all jumbled together.
For now, it's only allowed when exporttree=yes is also set.
That simplified the implementation, but could later be changed if
there's a remote that makes sense to be an import but not an export.
However, it may work just as well to make a remote be readonly to
prevent export to it while still allowing import.
Made some api changes.
listImportableContents needs to provide the size
of the data, so the downloader can check disk free space.
retrieveExportWithContentIdentifier is passed the filepath to write to
Use temporary "CID" key during download of a ContentIdentifier from a
remote, so withTmp can be used and then move the content to the real key
once it's known.
What these generate is not really suitable to be used as a filename,
which is why keyFile and fileKey further escape it. These are just
serializing Keys.
Also removed a quickcheck test that was very unlikely to test anything
useful, since it relied on random chance creating something that looks
like a serialized key. The other test is sufficient for testing what
that was intended to test anyway.
This is groundwork for nested seek loops, eg seeking over all files and
then performing commandActions on a list of remotes, which can be done
concurrently.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Added --json-error-messages option, which includes error messages in the
json output, rather than outputting them to stderr.
The actual rediretion of errors is not implemented yet, this is only
the docs and option plumbing.
This commit was supported by the NSF-funded DataLad project.
This is the same as running git annex reinject --known, followed by
git-annex import. The advantage to having it in one command is that it
only has to hash each file once; the two commands have to
hash the imported files a second time.
This commit was sponsored by Shane-o on Patreon.
import: --deduplicate and --skip-duplicates were implemented inneficiently;
they unncessarily hashed each file twice. They have been improved to only
hash once.
The new approach is to lock down (minimally) and hash files, and then
reuse that information when importing them.
This was rather tricky, especially in detecting changes to files while
they are being imported.
The output of import changed slightly. While before it silently skipped
over files with eg --skip-duplicates, now it shows each file as it starts
to act on it. Since every file is hashed first thing, it would otherwise
not be clear what file import is chewing on. (Actually, it wasn't clear
before when any of the duplicates switches were used.)
This commit was sponsored by Alexander Thompson on Patreon.
Before, only content known to be present somewhere was considered a
duplicate. Now, any content that has been annexed before will be considered
a duplicate, even if all annexed copies of the data have been lost.
Note that --clean-duplicates and --deduplicate still check numcopies,
so won't delete duplicate files unless there's an annexed copy.
This makes import use the same method as reinject --known.
The man page already said that duplicate meant "its content is either
present in the local repository already, or git-annex knows of another
repository that contains it, or it was present in the annex before but has
been removed now". So, this is really only bringing the implementation into
line with the man page.
This commit was sponsored by Jochen Bartl on Patreon.
ghc 8 added backtraces on uncaught errors. This is great, but git-annex was
using error in many places for a error message targeted at the user, in
some known problem case. A backtrace only confuses such a message, so omit it.
Notably, commands like git annex drop that failed due to eg, numcopies,
used to use error, so had a backtrace.
This commit was sponsored by Ethan Aubin.
importfeed just calls addurl functions, so inherits this from it.
Note that addurl still generates a temp file, and uses that key to download
the file. It just adds it to the work tree at the end when the file is small.
There should be no behavior changes in this commit, it just adds a more
expressive data type and adjusts code that had been passing around a [UUID]
or sometimes a Maybe Remote to instead use [VerifiedCopy].
Although, since some functions were taking two different [UUID] lists,
there's some potential for me to have gotten it horribly wrong.
This is a work in progress. It compiles and is able to do basic command
dispatch, including git autocorrection, while using optparse-applicative
for the core commandline parsing.
* Many commands are temporarily disabled before conversion.
* Options are not wired in yet.
* cmdnorepo actions don't work yet.
Also, removed the [Command] list, which was only used in one place.
--deduplicate, --skip-duplicates, and --clean-duplicates still checksum the
file twice, the first time to determine if it's a duplicate. This cannot be
easily merged with the checksumming done to add the file, since the file
needs to be locked down before that second checksum is taken.
Reverts 965e106f24
Unfortunately, this caused breakage on Windows, and possibly elsewhere,
because parentDir and takeDirectory do not behave the same when there is a
trailing directory separator.
parentDir is less safe than takeDirectory, especially when working
with relative FilePaths. It's really only useful in loops that
want to terminate at /
This commit was sponsored by Audric SCHILTKNECHT.
This fixes all instances of " \t" in the code base. Most common case
seems to be after a "where" line; probably vim copied the two space layout
of that line.
Done as a background task while listening to episode 2 of the Type Theory
podcast.
This avoids cp -a overriding the default mode acls that the user might have
set in a git repository.
With GNU cp, this behavior change should not be a breaking change, because
git-anex also uses rsync sometimes in the same situation, and has only ever
preserved timestamps when using rsync.
Systems without GNU cp will no longer use cp -a, but instead just cp.
So, timestamps will no longer be preserved. Preserving timestamps when
copying between repos is not guaranteed anyway.
Closes: #729757
I've been disliking how the command seek actions were written for some
time, with their inversion of control and ugly workarounds.
The last straw to fix it was sync --content, which didn't fit the
Annex [CommandStart] interface well at all. I have not yet made it take
advantage of the changed interface though.
The crucial change, and probably why I didn't do it this way from the
beginning, is to make each CommandStart action be run with exceptions
caught, and if it fails, increment a failure counter in annex state.
So I finally remove the very first code I wrote for git-annex, which
was before I had exception handling in the Annex monad, and so ran outside
that monad, passing state explicitly as it ran each CommandStart action.
This was a real slog from 1 to 5 am.
Test suite passes.
Memory usage is lower than before, sometimes by a couple of megabytes, and
remains constant, even when running in a large repo, and even when
repeatedly failing and incrementing the error counter. So no accidental
laziness space leaks.
Wall clock speed is identical, even in large repos.
This commit was sponsored by an anonymous bitcoiner.
Previous test did not notice if there is a dangling symlink.
Also, if a directory exists with the same name as the imported file, that
cannot work, so don't let --force have an effect.
Note that the hash backends were made to stop printing a (checksum..)
message as part of this, since it showed up without a file when deciding
whether to act on a file. Should have probably removed that message a while
ago anyway, I suppose.
Note that --deduplicate currently checksums each file twice,
once to see if it's a known key, and once when importing it.
Perhaps this could be revisited and the extra checksum gotten rid of,
at the cost of not locking down the file when adding it.
This avoids some small overhead by only running the check once per command;
it also ensures that, even if the command doesn't find anything to run on,
it still fails to run when in a bare repo.