Added a mkUnavailable method, which a Remote can use to generate a version
of itself that is not available. Implemented for several, but not yet all
remotes.
This allows testing that checkPresent properly throws an exceptions when
it cannot check if a key is present or not. It also allows testing that the
other methods don't throw exceptions in these circumstances.
This immediately found several bugs, which this commit also fixes!
* git remotes using ssh accidentially had checkPresent return
an exception, rather than throwing it
* The chunking code accidentially returned False rather than
propigating an exception when there were no chunks and
checkPresent threw an exception for the non-chunked key.
This commit was sponsored by Carlo Matteo Capocasa.
This will allow special remotes to eg, open a http connection and reuse it,
while checking if chunks are present, or removing chunks.
S3 and WebDAV both need this to support chunks with reasonable speed.
Note that a special remote might want to cache a http connection across
multiple requests. A simple case of this is that CheckPresent is typically
called before Store or Remove. A remote using this interface can certianly
use a Preparer that eg, uses a MVar to cache a http connection.
However, it's up to the remote to then deal with things like stale or
stalled http connections when eg, doing a series of downloads from a remote
and other places. There could be long delays between calls to a remote,
which could lead to eg, http connection stalls; the machine might even
move to a new network, etc.
It might be nice to improve this interface later to allow
the simple case without needing to handle the full complex case.
One way to do it would be to have a `Transaction SpecialRemote cache`,
where SpecialRemote contains methods for Storer, Retriever, Remover, and
CheckPresent, that all expect to be passed a `cache`.
I tend to prefer moving toward explicit exception handling, not away from
it, but in this case, I think there are good reasons to let checkPresent
throw exceptions:
1. They can all be caught in one place (Remote.hasKey), and we know
every possible exception is caught there now, which we didn't before.
2. It simplified the code of the Remotes. I think it makes sense for
Remotes to be able to be implemented without needing to worry about
catching exceptions inside them. (Mostly.)
3. Types.StoreRetrieve.Preparer can only work on things that return a
Bool, which all the other relevant remote methods already did.
I do not see a good way to generalize that type; my previous attempts
failed miserably.
Make the byteRetriever be passed the callback that consumes the bytestring.
This way, there's no worries about the lazy bytestring not all being read
when the resource that's creating it is closed.
Which in turn lets bup, ddar, and S3 each switch from using an unncessary
fileRetriver to a byteRetriever. So, more efficient on chunks and encrypted
files.
The only remaining fileRetrievers are hook and external, which really do
retrieve to files.
bup already splits files and does rolling deltas, so there is no reason to
use chunking here.
The new API made it easier to add progress support for storeKey, so that's
done. Unfortunately, bup-split still outputs its own progress with -q,
so a little ugly, but not too bad.
Made dropping remove the branch for an object, for two reasons:
1. The new API calls removeKey to roll back a storeKey when the content
changed unexpectedly.
2. So that testremote will be happy.
Also, fixed a bug that caused a crash when removing the branch for an
object in rollback.
It is useful to be able to specify an alternative git-annex-shell
program to execute on the remote, e.g., to run a version not on the
PATH. Use remote.<name>.annex-shell if specified, instead of the
default "git-annex-shell" i.e., first so-named executable on the
PATH.
Potentially fixes some FD leak if an action on an opened file handle fails
for some reason. There have been some hard to reproduce reports of
git-annex leaking FDs, and this may solve them.
Currently only implemented for local git remotes. May try to add support
to git-annex-shell for ssh remotes later. Could concevably also be
supported by some special remote, although that seems unlikely.
Cronner user this when available, and when not falls back to
fsck --fast --from remote
git annex fsck --from does not itself use this interface.
To do so, I would need to pass --fast and all other options that influence
fsck on to the git annex fsck that it runs inside the remote. And that
seems like a lot of work for a result that would be no better than
cd remote; git annex fsck
This may need to be revisited if git-annex-shell gets support, since it
may be the case that the user cannot ssh to the server to run git-annex
fsck there, but can run git-annex-shell there.
This commit was sponsored by Damien Diederen.
This is a massive win on OSX, which doesn't have a sha256sum normally.
Only use external hash commands when the file is > 1 mb,
since cryptohash is quite close to them in speed.
SHA is still used to calculate HMACs. I don't quite understand
cryptohash's API for those.
Used the following benchmark to arrive at the 1 mb number.
1 mb file:
benchmarking sha256/internal
mean: 13.86696 ms, lb 13.83010 ms, ub 13.93453 ms, ci 0.950
std dev: 249.3235 us, lb 162.0448 us, ub 458.1744 us, ci 0.950
found 5 outliers among 100 samples (5.0%)
4 (4.0%) high mild
1 (1.0%) high severe
variance introduced by outliers: 10.415%
variance is moderately inflated by outliers
benchmarking sha256/external
mean: 14.20670 ms, lb 14.17237 ms, ub 14.27004 ms, ci 0.950
std dev: 230.5448 us, lb 150.7310 us, ub 427.6068 us, ci 0.950
found 3 outliers among 100 samples (3.0%)
2 (2.0%) high mild
1 (1.0%) high severe
2 mb file:
benchmarking sha256/internal
mean: 26.44270 ms, lb 26.23701 ms, ub 26.63414 ms, ci 0.950
std dev: 1.012303 ms, lb 925.8921 us, ub 1.122267 ms, ci 0.950
variance introduced by outliers: 35.540%
variance is moderately inflated by outliers
benchmarking sha256/external
mean: 26.84521 ms, lb 26.77644 ms, ub 26.91433 ms, ci 0.950
std dev: 347.7867 us, lb 210.6283 us, ub 571.3351 us, ci 0.950
found 6 outliers among 100 samples (6.0%)
import Crypto.Hash
import Data.ByteString.Lazy as L
import Criterion.Main
import Common
testfile :: FilePath
testfile = "/run/shm/data" -- on ram disk
main = defaultMain
[ bgroup "sha256"
[ bench "internal" $ whnfIO internal
, bench "external" $ whnfIO external
]
]
sha256 :: L.ByteString -> Digest SHA256
sha256 = hashlazy
internal :: IO String
internal = show . sha256 <$> L.readFile testfile
external :: IO String
external = do
s <- readProcess "sha256sum" [testfile]
return $ fst $ separate (== ' ') s
To support this, a core.gcrypt-id is stored by git-annex inside the git
config of a local gcrypt repository, when setting it up.
That is compared with the remote's cached gcrypt-id. When different, a
drive has been changed. git-annex then looks up the remote config for
the uuid mapped from the core.gcrypt-id, and tweaks the configuration
appropriately. When there is no known config for the uuid, it will refuse to
use the remote.
This is a git-remote-gcrypt encrypted special remote. Only sending files
in to the remote works, and only for local repositories.
Most of the work so far has involved making initremote work. A particular
problem is that remote setup in this case needs to generate its own uuid,
derivied from the gcrypt-id. That required some larger changes in the code
to support.
For ssh remotes, this will probably just reuse Remote.Rsync's code, so
should be easy enough. And for downloading from a web remote, I will need
to factor out the part of Remote.Git that does that.
One particular thing that will need work is supporting hot-swapping a local
gcrypt remote. I think it needs to store the gcrypt-id in the git config of the
local remote, so that it can check it every time, and compare with the
cached annex-uuid for the remote. If there is a mismatch, it can change
both the cached annex-uuid and the gcrypt-id. That should work, and I laid
some groundwork for it by already reading the remote's config when it's
local. (Also needed for other reasons.)
This commit was sponsored by Daniel Callahan.
With the initremote parameters "encryption=pubkey keyid=788A3F4C".
/!\ Adding or removing a key has NO effect on files that have already
been copied to the remote. Hence using keyid+= and keyid-= with such
remotes should be used with care, and make little sense unless the point
is to replace a (sub-)key by another. /!\
Also, a test case has been added to ensure that the cipher and file
contents are encrypted as specified by the chosen encryption scheme.
Most remotes have meters in their implementations of retrieveKeyFile
already. Simply hooking these up to the transfer log makes that information
available. Easy peasy.
This is particularly valuable information for encrypted remotes, which
otherwise bypass the assistant's polling of temp files, and so don't have
good progress bars yet.
Still some work to do here (see progressbars.mdwn changes), but this
is entirely an improvement from the lack of progress bars for encrypted
downloads.
There was confusion in different parts of the progress bar code about
whether an update contained the total number of bytes transferred, or the
number of bytes transferred since the last update. One way this bug
showed up was progress bars that seemed to stick at zero for a long time.
In order to fix it comprehensively, I add a new BytesProcessed data type,
that is explicitly a total quantity of bytes, not a delta.
Note that this doesn't necessarily fix every problem with progress bars.
Particularly, buffering can now cause progress bars to seem to run ahead
of transfers, reaching 100% when data is still being uploaded.
Pass subcommand as a regular param, which allows passing git parameters
like -c before it. This was already done in the pipeing set of functions,
but not the command running set.
Both the directory and webdav special remotes used to have to buffer
the whole file contents before it could be decrypted, as they read
from chunks. Now the chunks are streamed through gpg with no buffering.
bup 0.25 does not accept that; and bup split reads from stdin by
default if no file is given. I'm not sure what version of bup changed this.
This only affected bup special remotes that were encrypted.
Transfer info files are updated when the callback is called, updating
the number of bytes transferred.
Left unused p variables at every place the callback should be used.
Which is rather a lot..
Currently only the web special remote is readonly, but it'd be possible to
also have readonly drives, or other remotes. These are handled in the
assistant by only downloading from them, and never trying to upload to
them.
This commit includes a paydown on technical debt incurred two years ago,
when I didn't know that it was bad to make custom Read and Show instances
for types. As the routes need Read and Show for Transfer, which includes a
Key, and deriving my own Read instance of key was not practical,
I had to finally clean that up.
So the compact Key read and show functions are now file2key and key2file,
and Read and Show are now derived instances.
Changed all code that used the old instances, compiler checked.
(There were a few places, particularly in Command.Unused, and the test
suite where the Show instance continue to be used for legitimate
comparisons; ie show key_x == show key_y (though really in a bloom filter))
Make Utility.Process wrap the parts of System.Process that I use,
and add debug logging to them.
Also wrote some higher-level code that allows running an action
with handles to a processes stdin or stdout (or both), and checking
its exit status, all in a single function call.
As a bonus, the debug logging now indicates whether the process
is being run to read from it, feed it data, chat with it (writing and
reading), or just call it for its side effect.
Test suite now passes with -threaded!
I traced back all the hangs with -threaded to System.Cmd.Utils. It seems
it's just crappy/unsafe/outdated, and should not be used. System.Process
seems to be the cool new thing, so converted all the code to use it
instead.
In the process, --debug stopped printing commands it runs. I may try to
bring that back later.
Note that even SafeSystem was switched to use System.Process. Since that
was a modified version of code from System.Cmd.Utils, it needed to be
converted too. I also got rid of nearly all calls to forkProcess,
and all calls to executeFile, which I'm also doubtful about working
well with -threaded.
In order to record a semi-useful filename associated with the key,
this required plumbing the filename all the way through to the remotes'
storeKey and retrieveKeyFile.
Note that there is potential for deadlock here, narrowly avoided.
Suppose the repos are A and B. A sends file foo to B, and at the same
time, B gets file foo from A. So, A locks its upload transfer info file,
and then locks B's download transfer info file. At the same time,
B is taking the two locks in the opposite order. This is only not a
deadlock because the lock code does not wait, and aborts. So one of A or
B's transfers will be aborted and the other transfer will continue.
Whew!
Baked into the code was an assumption that a repository's git directory
could be determined by adding ".git" to its work tree (or nothing for bare
repos). That fails when core.worktree, or GIT_DIR and GIT_WORK_TREE are
used to separate the two.
This was attacked at the type level, by storing the gitdir and worktree
separately, so Nothing for the worktree means a bare repo.
A complication arose because we don't learn where a repository is bare
until its configuration is read. So another Location type handles
repositories that have not had their config read yet. I am not entirely
happy with this being a Location type, rather than representing them
entirely separate from the Git type. The new code is not worse than the
old, but better types could enforce more safety.
Added support for core.worktree. Overriding it with -c isn't supported
because it's not really clear what to do if a git repo's config is read, is
not bare, and is then overridden to bare. What is the right git directory
in this case? I will worry about this if/when someone has a use case for
overriding core.worktree with -c. (See Git.Config.updateLocation)
Also removed and renamed some functions like gitDir and workTree that
misused git's terminology.
One minor regression is known: git annex add in a bare repository does not
print a nice error message, but runs git ls-files in a way that fails
earlier with a less nice error message. This is because before --work-tree
was always passed to git commands, even in a bare repo, while now it's not.
Continue using the key name as bup ref name, to preserve backwards
compatability, unless it is an illegal git ref. In that case, use a sha256
of the key name instead.
getConfig got a remote-specific config, and this confusing name caused it
to be used a couple of places that only were interested in global configs.
Rename to getRemoteConfig and make getConfig only get global configs.
There are no behavior changes here, but remote.<name>.annex-web-options
never actually worked (and per-remote web options is a very unlikely to be
useful case so I didn't make it work), so fix the documentation for it.
