When importing from a special remote, support preferred content expressions
that use terms that match on keys (eg "present", "copies=1"). Such terms
are ignored when importing, since the key is not known yet.
When "standard" or "groupwanted" is used, the terms in those
expressions also get pruned accordingly.
This does allow setting preferred content to "not (copies=1)" to make a
special remote into a "source" type of repository. Importing from it will
import all files. Then exporting to it will drop all files from it.
In the case of setting preferred content to "present", it's pruned on
import, so everything gets imported from it. Then on export, it's applied,
and everything in it is left on it, and no new content is exported to it.
Since the old behavior on these preferred content expressions was for
importtree to error out, there's no backwards compatability to worry about.
Except that sync/pull/etc will now import where before it errored out.
And annex.largefiles and annex.addunlocked.
Also git-annex matchexpression --explain explains why its input
expression matches or fails to match.
When there is no limit, avoid explaining why the lack of limit
matches. This is also done when no preferred content expression is set,
although in a few cases it defaults to a non-empty matcher, which will
be explained.
Sponsored-by: Dartmouth College's DANDI project
When two files have the same content, and a required content expression
matches one but not the other, dropping the latter file will fail as it
would also remove the content of the required file.
This will slow down drop (w/o --auto), dropunused, mirror, and move, by one
keys db lookup per file. But I did include an optimisation to avoid a
double db lookup in the drop --auto / sync --content case. I suspect that
dropunused could also use PreferredContentChecked True, but haven't
entirely thought it through and it's rarely used with enough files for the
optimisation to matter.
Sponsored-by: Dartmouth College's Datalad project
Sped up seeking to around twice as fast, by avoiding a pass over the
worktree files when preferred content expressions of the local repo and
remotes don't use include=/exclude=.
Thanks to Lukey for identifying the optimisation.
This commit was sponsored by Brock Spratlen on Patreon.
When the required content is set to "groupwanted", use whatever expression
has been set in groupwanted as the required content of the repo, similar to
how setting required content to "standard" already worked.
* annex.addunlocked can be set to an expression with the same format used by
annex.largefiles, in case you want to default to unlocking some files but
not others.
* annex.addunlocked can be configured by git-annex config.
Added a git-annex-matching-expression man page, broken out from
tips/largefiles.
A tricky consequence of this is that git-annex add --relaxed
honors annex.addunlocked, but an expression might want to know the size
or content of an url, which it's not going to download. I decided it was
better not to fail, and just dummy up some plausible data in that case.
Performance impact should be negligible. The global config is already
loaded for annex.largefiles. The expression only has to be parsed once,
and in the simple true/false case, it should not do any additional work
matching it.
Importing from a special remote honors its preferred content too; unwanted
files are not imported. But, some preferred content expressions can't be
checked before files are imported, and trying to import with such an
expression will fail.
Tested this with scenarios including changing the preferred content
expression and making sure merging the import didn't delete files that were
no longer wanted.
There was one minor inefficiency mentioned in the todo that I punted on.
Only when the preferred content expression includes them will a parse
failure due to them needing keys result in the preferred content
expression not parsing in keyless mode.
This will let import try to match preferred content expressions before
downloading the content and generating its key.
If an expression needs a key, it preferredContentParser with
preferredContentKeylessTokens will fail to parse it.
standard and groupwanted are not in preferredContentKeylessTokens
because they may refer to an expression that refers to a key.
That needs further work to support them.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
This preserves the workaround for the old bug that caused NoUUID items
to be stored in the log, prefixing log lines with " ". It's now handled
implicitly, by using takeWhile1 (/= ' ') to get the uuid.
There is a behavior change from the old parser, which split the value
into words and then recombined it. That meant that "foo bar" and "foo\tbar"
came out as "foo bar". That behavior was not documented, and seems
surprising; it meant that after a git-annex describe here "foo bar",
you wouldn't get that same string back out when git-annex displayed repo
descriptions.
Otoh, some other parsers relied on the old behavior, and the attoparsec
rewrites had to deal with the issue themselves...
For group.log, there are some edge cases around the user providing a
group name with a leading or trailing space. The old parser would ignore
such excess whitespace. The new parser does too, because the alternative
is to refuse to parse something like " group1 group2 " due to excess
whitespace, which would be even more confusing behavior.
The only git-annex branch log file that is not converted to attoparsec
and bytestring-builder now is transitions.log.
Most of the individual logs are not converted yet, only presense logs
have an efficient ByteString Builder implemented so far. The rest
convert to and from String.
v6: When annex.largefiles is not configured for a file, running git add or
git commit, or otherwise using git to stage a file will add it to the annex
if the file was in the annex before, and to git otherwise. This is to avoid
accidental conversion.
Note that git-annex add's behavior has not changed, for reasons explained
in the added comment.
Performance: No added overhead when annex.largefiles is configured.
When not configured, there is an added call to catObjectMetaData,
which involves a round trip through git cat-file --batch.
However, the earlier catKeyFile primes the cache for it.
This commit was supported by the NSF-funded DataLad project.
Avoid stomping on existing group and preferred content settings
when enabling or combining with an already existing remote.
Two level fix. First, use defaultStandardGroup rather than
setStandardGroup, so if there is an existing configuration in the git-annex
branch, it's not overwritten.
To handle pre-existing ssh remotes (including gcrypt), a second level is
needed, because before syncing with the remote, it's configuration won't be
available locally. (And syncing could take a long time.) So, in this case,
keep track of whether the remote is being created or enabled, and only set
configs when creating it.
This commit was sponsored by Anders Lannerback.
This includes checking when dropping files that any required content
configuration is satisfied. However, it does not yet include an active
check on the required content; the location log is trusted when checking
the required content expression.
For example "standard or (include=otherdir/*)" or even "not standard"
Note that the implementation avoids any potential for loops (if a
standard preferred content expression itself mentioned standard).
This commit was sponsored by Jochen Bartl.
Several places assumed this would not happen, and when the AssociatedFile
was Nothing, did nothing.
As part of this, preferred content checks pass the Key around.
Note that checkMatcher is sometimes now called with Just Key and Just File.
It currently constructs a FileMatcher, ignoring the Key. However, if it
constructed a FileKeyMatcher, which contained both, then it might be
possible to speed up parts of Limit, which currently call the somewhat
expensive lookupFileKey to get the Key.
I have not made this optimisation yet, because I am not sure if the key is
always the same. Will need some significant checking to satisfy myself
that's the case..
This was unexpectedly difficult because of a depdenency cycle. To parse a
preferred content expression involves several things that need to operate
on the list of remotes. Which needs Remote.External. The only way to avoid
this cycle (I tried breaking it at several points) was to skip parsing the
expression in SETWANTED.
That's sorta ok, because git-annex already has to deal with unparsable
preferred content expressions being stored, in order to handle eg,
upgrades. But I'm still not very happy that I cannot check it.
I feel this is a strong indication that I need to beware of further
bloating the special remote protocol interface.
Having one module that knows about all the filenames used on the branch
allows working back from an arbitrary filename to enough information about
it to implement dropping dead remotes and doing other log file compacting
as part of a forget transition.
I would have sort of liked to put this in .gitattributes, but it seems
it does not support multi-word attribute values. Also, making this a single
config setting makes it easy to only parse the expression once.
A natural next step would be to make the assistant `git add` files that
are not annex.largefiles. OTOH, I don't think `git annex add` should
`git add` such files, because git-annex command line tools are
not in the business of wrapping git command line tools.
* get/copy --auto: Transfer data even if it would exceed numcopies,
when preferred content settings want it.
* drop --auto: Fix dropping content when there are no preferred content
settings.
Monitors git-annex branch for changes, which are noticed by the Merger
thread whenever the branch ref is changed (either due to an incoming push,
or a local change), and refreshes cached config values for modified config
files.
Rate limited to run no more often than once per minute. This is important
because frequent git-annex branch changes happen when files are being
added, or transferred, etc.
A primary use case is that, when preferred content changes are made,
and get pushed to remotes, the remotes start honoring those settings.
Other use cases include propigating repository description and trust
changes to remotes, and learning when a remote has added a new special
remote, so the webapp can present the GUI to enable that special remote
locally.
Also added a uuid.log cache. All other config files already had caches.
in= was problimatic in two ways. First, it referred to a remote by name,
but preferred content expressions can be evaluated elsewhere, where that
remote doesn't exist, or a different remote has the same name. This name
lookup code could error out at runtime. Secondly, in= seemed pretty useless.
in=here did not cause content to be gotten, but it did let present content
be dropped.
present is more useful, although "not present" is unstable and should be
avoided.
When in a subdir, both the normal filepath, and the filepath relative to
the top of the git repo are needed for matching. The former for key lookup,
and the latter for include/exclude to match against. Previously, key lookup
didn't work in this situation.
