Fixed annex-checkuuid implementation, so that remotes configured that way
can be used. This was 100% broken from the first commit of it, oops.
This commit was sponsored by Øyvind Andersen Holm.
Show operating system and repository version list when run outside
a git repo too.
Also made it only display the local repository version when in a git-annex
repo. Before it showed "unknown" when run in a git repo that was not
git-annex initialized. That seemed like confusing behavior.
This commit was sponsored by Jochen Bartl on Patreon.
https://prime.haskell.org/wiki/Libraries/Proposals/SemigroupMonoid
I am not happy with the fragile pile of CPP boilerplate required to support
ghc back to 7.0, which git-annex still targets for both the android build
and the standalone build targeting old linux kernels. It makes me unlikely
to want to use Semigroup more in git-annex, because the benefit of the
abstraction is swamped by the ugliness. I actually considered ripping out
all the Semigroup instances, but some are needed to use
optparse-applicative.
The problem, I think, is they made this transaction on too fast a timeline.
(Although ironically, work on it started in 2015 or earlier!)
In particular, Debian oldstable is not out of security support, and it's
not possible to follow the simpler workarounds documented on the wiki and
have it build on oldstable (because the semigroups package in it is too
old).
I have only tested this build with ghc 8.2.2, not the newer and older
versions that branches of the CPP support. So there could be typoes, we'll
see.
This commit was sponsored by Brock Spratlen on Patreon.
Makes it allow writes, but not deletion of annexed content. Note that
securing pushes to the git repository is left up to the user.
This commit was sponsored by Jack Hill on Patreon.
* migrate: Fix bug in migration between eg SHA256 and SHA256E,
that caused the extension to be included in SHA256 keys,
and omitted from SHA256E keys.
(Bug introduced in version 6.20170214)
* migrate: Check for above bug when migrating from SHA256 to SHA256
(and same for SHA1 to SHA1 etc), and remove the extension that should
not be in the SHA256 key.
* fsck: Detect and warn when keys need an upgrade, either to fix up
from the above migrate bug, or to add missing size information
(a long ago transition), or because of a few other past key related
bugs.
This commit was sponsored by Henrik Riomar on Patreon.
Prevent haskell http-client from decompressing gzip files, so downloads of
such files works the same as it used to with wget and curl.
Explicitly setting accept-encoding to "identity" is probably not needed,
but that's what wget sends (curl does not send the header), and since
http-client is trying to be excessively smart, it seems we need to set
hAcceptEncoding to something to prevent it from inserting its own,
and this seems better than some hack like "".
This commit was sponsored by Ole-Morten Duesund on Patreon.
* move: --force was accidentially enabling two unrelated behaviors
since 6.20180427. The older behavior, which has never been well
documented and seems almost entirely useless, has been removed.
* copy: --force no longer does anything.
This commit was sponsored by Øyvind Andersen Holm.
In some cases, unstaged changes are safe, eg dotfiles in the top which
are not affected by a view. Or non-annexed files in general which would
prevent view branch checkout from proceeding. But in other cases,
particularly unstaged changes to annexed files, entering a view would wipe
out those changes! And so don't allow entering a view with any unstaged
changes.
Staged changes are not safe when entering a view, because the changes get
committed to the view branch, and so the user is unlikely to remember them
when they exit the view, and so will effectively lose them, even if they're
still present in the view branch.
Also, improved the git status parser, although the improvement turned out
to not really be needed.
This commit was sponsored by Eric Drechsel on Patreon.
This fixes a crash when a git submodule has a name starting with a dot.
Such a submodule might contain dotfiles that are intended to be used when
inside the view (since a dot-directory that's not a submodule was already
preserved when entering a view). So, rather than eliminating the submodule
from the view, its git ls-files --stage hash is copied over into the view.
dotfiles/dirs have their git ls-files --stage hashes similarly copied over
to the view. This is more efficient and simpler than the old method,
and also won't break if git ever adds a new type of tree item, like was
done with submodules.
Since the content of dotfiles in the working tree is no longer hashed
when entering a view, when there are unstaged modifications, they are
not included in the view branch. Entering the view branch still works,
but git checkout shows "M .dotfile", and git diff will show the unstaged
changes. This seems like an improvement over the old behavior.
Also made Command.View not delete empty directories that are submodules
when entering a view, while still deleting other empty directories.
This commit was supported by the NSF-funded DataLad project.
* Display error message when http download fails.
There's nothing in the http-client library to nicely format a http
exception, so in some cases it has to fall back to using show on it.
Seems better than just saying "it failed" or only showing the http
status code.
* Avoid forward retry when 0 bytes were received.
forwardRetry was comparing Nothing to Just 0, and so thought there had
been progress made when 0 bytes were received.
This commit was supported by the NSF-funded DataLad project.
The old git-annex Android app is now deprecated in favor of running
git-annex in termux. I suspect all or nearly all of these no longer apply.
This commit was sponsored by Jochen Bartl on Patreon.
runshell: Use proot when running on Android, to work around Android 8's
ill-advised seccomp filtering of system calls, including ones crucial for
reliable thread locking. (This will only work with termux's version of
proot.)
See https://github.com/termux/termux-packages/issues/420#issuecomment-386636938
This commit was sponsored by andrea rota.
Fix regression in last release that crashes when using --all or running
git-annex in a bare repository. May have also affected git-annex unused and
git-annex info.
Reversed the order of the (++) in Annex.Branch.files so --all will stream
lazily still when there are not a bunch of uncommitted journal files.
Added a todo to maybe improve this later.
This commit was sponsored by Trenton Cronholm on Patreon.
This leaves git annex unused --from remote still using loggedKeysFor
and buffering more than ought to be necessary, but I can't see a way to
improve that.
In Annex.Branch.branch, the (++) was killing laziness.
Rewrote so it streams lazily.
filterM also kills laziness, so made loggedKeys use a Unchecked type,
and check if the key is dead in the seek loop.
Note that loggedKeysFor still buffers, so git-annex info <remote> and
git-annex unused --from remote still use more memory than necessary.
Also removed some unused functions from Annex.Journal.
Test case is 24 directories each containing files named 1..10000.
The concat and filterM destroyed what laziness there is in
dirContentsRecursive, making it buffer all the filenames. Memory
use was around 300 mb (possibly growing slightly as it progressed).
After this fix, memory use drops to a constant 59 mb.
Note that dirContentsRecursive still buffers the entire content of a
directory (not subdirectories) so this is still not optimal.
runshell followed by git annex webapp didn't install that stuff, because
GIT_ANNEX_APP_BASE is not set. Running git-annex.linux/git-annex-webapp did
install that stuff, since that script set the env var. I noticed this with
the termux port whose instructions currently go that way.
Seems the right thing to do is to move the env var setting to runshell.
Assistant: Integrate with Termux:Boot, so when it's installed, the
assistant is autostarted on boot.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Added some tweaks to make git-annex work in termux on Android. The regular
arm standalone tarball now works in termux.
I guess the test for "$base/bin/git" is not really necessary, since it
tests for git-annex. Since that gets deleted on android, removed that test.
These are pretty hackish hacks, especially adding it to PATH. The goal is
to make it work well enough out of the box on Android.
This commit was sponsored by Eric Drechsel on Patreon.
Preloaded libraries from the host system may not get along with the bundled
linker.
This was observed by users in termux:
ERROR: ld.so: object '/data/data/com.termux/files/usr/lib/libtermux-exec.so' from LD_PRELOAD cannot be preloaded (wrong ELF class:
ELFCLASS64): ignored.
Bad system call
But it could also affect more usual systems; the preloaded library might rely
on symbols from the host libc that are not available or have the wrong versions
in the bundled libc. Unsetting LD_PRELOAD entirely seems safest.
As long as all code imports Utility.Aeson rather than Data.Aeson,
and no Strings that may contain utf-8 characters are used for eg, object
keys via T.pack, this is guaranteed to fix the problem everywhere that
git-annex generates json.
It's kind of annoying to need to wrap ToJSON with a ToJSON', especially
since every data type that has a ToJSON instance has to be ported over.
However, that only took 50 lines of code, which is worth it to ensure full
coverage. I initially tried an alternative approach of a newtype FileEncoded,
which had to be used everywhere a String was fed into aeson, and chasing
down all the sites would have been far too hard. Did consider creating an
intentionally overlapping instance ToJSON String, and letting ghc fail
to build anything that passed in a String, but am not sure that wouldn't
pollute some library that git-annex depends on that happens to use ToJSON
String internally.
This commit was supported by the NSF-funded DataLad project.
See the big comment at the bottom of Command.Drop for the full details.
(The --safe/--unsafe options were never released.)
This commit was sponsored by Jake Vosloo on Patreon.
move: Added --safe option, which makes move honor numcopies settings.
Also --unsafe enables the default behavior, anticipating that the
default may one day change.
This commit was sponsored by Ethan Aubin.
* For url downloads, git-annex now defaults to using a http library,
rather than wget or curl. But, if annex.web-options is set, it will
use curl. To use the .netrc file, run:
git config annex.web-options --netrc
* git-annex no longer uses wget (and wget is no longer shipped with
git-annex builds).
Note that curl is always run in silent mode, since the new API for
download has a MeterUpdate and doesn't make way for curl progress
output. It might be worth writing a parser for curl's progress output
to update the meter when using it, but I didn't bother with this edge
case for now.
This commit was supported by the NSF-funded DataLad project.
Compare these...
numcopies stats:
numcopies -1: 1986
numcopies +0: 1170
numcopies -2: 769
numcopies +1: 716
numcopies -4: 696
numcopies -3: 485
numcopies -6: 230
numcopies -5: 111
numcopies -7: 91
numcopies -9: 9
numcopies stats:
numcopies +1: 716
numcopies +0: 1170
numcopies -1: 1986
numcopies -2: 769
numcopies -3: 485
numcopies -4: 696
numcopies -5: 111
numcopies -6: 230
numcopies -7: 91
numcopies -9: 9
I feel that the former is a jumbled mess that doesn't tell much overall,
while the second shows pretty clearly that most files are within 1 degree
of the desired number of copies, with some outliers without enough.
Enable HTTP connection reuse across multiple files, when git-annex
uses http-conduit. Before, a new Manager was created each time
Utility.Url used it. Now, a single Manager gets created the first time,
so connections are reused.
Doesn't help when external programs are used for url download,
but does speed up addurl --fast, fsck --from web, etc.
Testing fsck --fast --from web with 3 files, over high-latency
satellite internet, it sped up from 19.37s to 14.96s.
This commit was supported by the NSF-funded DataLad project.
When adding a new version of a file, and annex.genmetadata is enabled,
don't copy the data metadata from the old version of the file, instead use
the mtime of the file. Rationalle being that the user has requested to
generate metadata and so would expect to get the new mtime into metadata.
Also, avoid warning about copying metadata when all the old metadata is
date metadata. Which was rather the harder part.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
I think this used to be the case, but it was accidentially lost way back in
commit 3887432c54. Normally, transfers do not
throw exceptions, so probably forward retrying was rarely done due to that
oversight.
This also affects the new annex.retry etc configuration. If a transfer
fails, without making any progress, eg because the file is not present on
the remote or the remote is not accessible, it will now retry when
configuration calls for it. In some cases such a retry is not desirable,
for example the remote could be accessible and not have a copy of the file
that the local repo thinks it has. I see no way to distinguish such cases
from cases where a retry should really be done. So, it'll be up to the user
to configure it to work for them.
Added annex.retry, annex.retry-delay, and per-remote versions to configure
transfer retries.
This commit was supported by the NSF-funded DataLad project.
git annex testremote passes.
exportree not implemented yet, although the documentation talks about it,
since it will be the main way this remote will be used.
The adb push/pull progress is displayed for now; it would be better
to consume it and use it to update the git-annex progress bar.
This commit was sponsored by andrea rota.
Fix race condition in ssh warmup that caused git-annex to get stuck and
never process some while when run with high levels of concurrency.
So far, I've isolated the problem to processTranscript, which hangs
reading output from ssh in this situation. I don't yet understand why
processTranscript behaves that way.
Since here we don't care about the ssh output, and only want to /dev/null
it, changed to not use processTranscript, avoiding its problem.
This commit was supported by the NSF-funded DataLad project.
Avoid creating transfer info file before transfer lock is created and
locked.
The wrong order for one thing caused transfer info to be overwritten
when a transfer was already in progress.
But worse, it caused checkTransfer to see the transfer info,
and so lock the transfer lock in order to verify the transfer was not in
progress. Which in a concurrent situation, prevented the transferrer
from locking the transfer lock, so it failed with "transfer already in
progress".
Note that the transferinfo command does not lock the transfer lock
before creating the transfer info. But, that's only run after
recvkey is running, and recvkey does lock the transfer lock, so that
seems more or less ok. (Other than being a super complicated legacy mess
that the P2P code has mostly obsoleted now.)
This commit was supported by the NSF-funded DataLad project.
There are a lot of different variants and sizes, I suppose we might as well
export all the common ones.
Bump dep to cryptonite to 0.16, earlier versions lacked BLAKE2 support.
Even android has 0.16 or newer.
On Debian, Blake2bp_512 is buggy, so I have omitted it for now.
http://bugs.debian.org/892855
This commit was sponsored by andrea rota.
When resuming a download and not using a rolling checksummer like rsync,
the partial file we start with might contain garbage, in the case where a
file changed as it was being downloaded. So, disabling verification on
resumes risked a bad object being put into the annex.
Even downloads with rsync are currently affected. It didn't seem worth the
added complexity to special case those to prevent verification, especially
since git-annex is using rsync less often now.
This commit was sponsored by Brock Spratlen on Patreon.
When git-annex-shell p2pstdio fails with 255, it's because the ssh
server is not reachable. Avoid running the fallback action in this case,
since it would just try a second time to connect, and presumably fail.
Note that the closed P2PSshConnection will not be stored in the pool,
so the next request tries again to connect. This is just the right
behavior; when the remote becomes reachable again, the same git-annex
process will start using it.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Note that, due to not using rsync to transfer files to ssh remotes
any longer, permissions and other file metadata of annexed files
will no longer be preserved when copying them to ssh remotes.
Other remotes never supported preserving that information, so
this is not considered a regression. Added NEWS item about this.
Another significant side effect of this is that, even when rsync is run to
retrieve a file, its progress display will no longer be shown, and
instead the native git-annex progress display will appear. It would be
possible to use the rsync process display when rsync is used (old
git-annex-shell and also retrieval from a local repository), but it
would have complicated the code unncessarily, and been inconsistent
behavior.
(I'd been thinking for a while about eliminating the rsync progress
display, since it's got some annoying verbosities, including display of
the key and the "(xfr#1, to-chk=0/1)" bit and was already somewhat
inconsistent.)
retrieveKeyFileCheap still uses rsync, since that ensures that it gets
the actual file content from the remote. Using the P2P protocol would
use the local content, as long as the local and remote size are the
same.
This commit was sponsored by John Pellman on Patreon.
Remote/Git.hs now contains AGPL licensed code, thus the license
of git-annex as a whole is AGPL. This was already the case when git-annex
was built with the webapp enabled.
The AGPL license will apply to all code added to Remote/Git.hs in the
future, which is going to include support for using
`git-annex-shell p2pstdio`.
Not yet used by git-annex, but this will allow faster transfers etc than
using individual ssh connections and rsync.
Not called git-annex-shell p2p, because git-annex p2p does something
else and I don't want two subcommands with the same name between the two
for sanity reasons.
This commit was sponsored by Øyvind Andersen Holm.
lockContentShared had a screwy caveat that it didn't verify that the content
was present when locking it, but in the most common case, eg indirect mode,
it failed to lock when the content is not present.
That led to a few callers forgetting to check inAnnex when using it,
but the potential data loss was unlikely to be noticed because it only
affected direct mode I think.
Fix data loss bug when the local repository uses direct mode, and a
locally modified file is dropped from a remote repsitory. The bug
caused the modified file to be counted as a copy of the original file.
(This is not a severe bug because in such a situation, dropping
from the remote and then modifying the file is allowed and has the same
end result.)
And, in content locking over tor, when the remote repository is
in direct mode, it neglected to check that the content was actually
present when locking it. This could cause git annex drop to remove
the only copy of a file when it thought the tor remote had a copy.
So, make lockContentShared do its own inAnnex check. This could perhaps
be optimised for direct mode, to avoid the check then, since locking
the content necessarily verifies it exists there, but I have not bothered
with that.
This commit was sponsored by Jeff Goeke-Smith on Patreon.
Do not treat parts of the filename that contain punctuation or other
non-alphanumeric characters as extensions. Before, such characters were
filtered out.
Note that in 45308ec78b "foo.ba__________r"
was munged to ".bar" and so incorrectly treated as an extension. That was
fixed by changing the filter order, but not allowing punctuation seems a
better fix.
This assumes that extensions containing punctuation are rare. "_" seems the
most likely character; I used it in ikiwiki "._comment" files. But I can't
recall seeing it anywhere else. It certianly seems that no commonly used
extensions contain punctuation. If git-annex doesn't treat "._comment"
as an extension, it's not likely to break software that expects to see that
extension like some software expects to see .epub or .mp3.
This commit was sponsored by Jack Hill on Patreon.
Prevent ghc and llc from running out of memory when optimising some
files.
Sean Whitton reported that doing this only in Test.hs was insufficient,
the build still OOMed by the time it got to Test.hs. He had earlier found
the build worked when these options are applied globally.
See https://ghc.haskell.org/trac/ghc/ticket/14821 for why it needs -O1;
once that's fixed it may suffice to use "GHC-Options: -O2 -optlo-O2",
although it may also be that the -O1 prevents ghc from using/leaking
as much memory.
os(arm) should match armel, armhf, armeb, and arm.
It probably also matches arm64, somewhat unfortunately since arm64
systems probably tend to have more memory. See list of arches in
https://hackage.haskell.org/package/Cabal-1.22.2.0/docs/src/Distribution-System.html
This commit was sponsored by Henrik Riomar on Patreon.
Renaming is not supported; it might be possible to use --fuzzy to get rsync
to notice the file is being renamed, but that is a bit ..fuzzy.
On the other hand, interrupted transfers of an exported file are resumed,
since rsync is great at that. Had to adjust the exporttree docs, which
said interrupted transfers would restart.
Note that remove no longer makes the empty directory dummy, instead
sending the top-level empty directory. This works just as well and I
noticed the dummy was unncessary when refactoring it into removeGeneric.
Verified that behavior of remove is not changed, and git annex
testremote does pass.
This commit was sponsored by Brock Spratlen on Patreon.
Makefile: Remove chrpath workaround for bug in cabal, which is no longer
needed.
https://github.com/haskell/cabal/issues/2717 says it uses RUNPATH instead
of RPATH now, but I don't even see that for statically linked libraries;
the bug with that appears to be fixed.
cabal-install version 1.24.0.2
compiled using version 1.24.2.0 of the Cabal library
I left the rpath removal using otool on OSX because those straight up
broke the linker, and I don't know if the OSX autobuilder is updated to
a new enough cabal to not need it.
This commit was sponsored by Ewen McNeill on Patreon.
sync: Fix bug that prevented pulling changes into direct mode repositories
that were committed to remotes using git commit rather than git-annex sync.
This commit was supported by the NSF-funded DataLad project.
tips/automatically_adding_metadata/pre-commit-annex: Fix to not silently
skip filenames containing non-ascii characters.
git diff-index defaults to munging non-ascii characters. Using -z makes
it not do that, and then we just change the nulls to newlines.
This commit was sponsored by Jochen Bartl on Patreon.
Added annex.merge-annex-branches config setting which can be used to
disable automatic merge of git-annex branches.
I wonder if git-annex merge/sync/assistant should disable this
setting? Not sure yet, so have not done so. May be that users will not set
it in git config, but pass it via -c to commands that need it.
Checking the config setting adds a very small overhead, but it's
only checked once per command so should be insignificant.
This commit was supported by the NSF-funded DataLad project.
Noticed while running this (which a user posted in a comment they deleted
for some reason):
git-annex importfeed https://vimeo.com/logiingimars/videos/rss
The filename that youtube-dl suggests included a subdirectory,
which didn't exist, so renaming to it failed.
This commit was sponsored by mo on Patreon.
Repositories that are upgraded from before that version to this
one will not break, but will just not see the benefit of the mergedrefs log
speeding things up, until one new ref gets merged in.
Added --json-error-messages option, which includes error messages in the
json output, rather than outputting them to stderr.
The actual rediretion of errors is not implemented yet, this is only
the docs and option plumbing.
This commit was supported by the NSF-funded DataLad project.
Fix behavior of --json-progress followed by --json, in which
the latter option disabled the former.
This commit was supported by the NSF-funded DataLad project.
The ghc options were found by Sean Whitton; the debian arm autobuilders
need those to build w/o OOM, and it seems to involve llvm using too much
memory to optimize Test.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
--json: When there are multiple lines of notes about a file, make the note
field multiline, rather than the old behavior of only including the last
line.
Using newlines in the note is perhaps not ideal, but upgrading it to an
array in this case would be an annoying inconsistency to need to deal with.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Merged from Debian.
I think what this actually deals with is the case where gpg is installed,
but gpg-agent is not, since Utility.Gpg.stdParams enables --use-agent
when GPG_BATCH is set, and the test suite enables GPG_BATCH. So, test suite
will work with gpg not installed, or with both gpg and gpg-agent installed,
but not with only gpg.
For this reason, I've also put in an explicit dep on gnupg, although
dpkg-dev recommends it and all debian package builds tend to have it
available implicitly.
Allows using new special remote messages when git-annex supports them,
and avoiding using them when git-annex is too old. The new INFO is one
such message.
There's also the possibility, currently unused, for the special remote's
reply to include some kind of extensions of its own.
Merging this is blocked by https://github.com/datalad/datalad/issues/2124
since it seems it will break datalad. I checked all the other special
remotes and they will be ok.
This commit was supported by the NSF-funded DataLad project.
It's left up to the special remote to detect when git-annex is new enough
to support the message; an old git-annex will blow up.
This commit was supported by the NSF-funded DataLad project.
Added remote.<name>.annex-checkuuid config, which can be set to false to
disable the default checking of the uuid of remotes that point to
directories. This can be useful to avoid unncessary drive spin-ups and
automounting.
Note that the UUID check is still done before writing to the repository,
to avoid writing to the wrong repository if it got relocated. Check is
also done before checkPresent to avoid getting confused about what is in
which repo. This is effectively the same as the use of git-annex-shell
with a uuid to check that the remote repository is the expected one.
Did not bother with the check for retrieveKeyFile because it doesn't
matter if the wrong repo is used then.
This commit was sponsored by Trenton Cronholm on Patreon.
And for tab completion, by not unnessessarily statting paths to remotes,
which used to cause eg, spin-up of removable drives.
Got rid of the remotes member of Git.Repo. This was a bit painful.
Remote.Git modifies the list of remotes as it reads their configs,
so still need a persistent list of remotes. So, put it in as
Annex.gitremotes. It's only populated by getGitRemotes, so commands
like examinekey that don't care about remotes won't do so.
This commit was sponsored by Jake Vosloo on Patreon.
git grep writeFile finds some more that might also be problems, but
for now I've concentrated on .git/annex/ log files. There are certianly
cases where writeFile is not a problem too.
This commit was sponsored by mo on Patreon.
Fourth or fifth try at this and finally found a way to make it work.
Absurd amount of busy-work forced on me by change in cabal's behavior.
Split up Utility modules that need posix stuff out of ones used by
Setup. Various other hacks around inability for Setup to use anything
that ifdefs a use of unix.
Probably lost a full day of my life to this.
This is how build systems make their users hate them. Just saying.
And also now in non-fast mode, since it was just changed to query for the
filename separately.
And avoid processTranscript which mixed up stdout and stderr and could have
led to weirdness if there were warnings that didn't get suppressed.
addurl: When the file youtube-dl will download is already an annexed file,
don't download it again and fail to overwrite it, instead just do nothing,
like it used to when quvi was used.
This commit was sponsored by Anthony DeRobertis on Patreon.
This reverts commit 51228c2306.
No, still doesn't work when built with cabal. It did with stack; stack
must somehow make the unix package implicitly available.
With cabal, System.Posix.Process and System.Posix.Env are both missing.
Seems I had all the work in past commits to make this build, at least on
linux. I'm actually surprised it does, without a unix dep, Utility.Env
still builds ok somehow despite using System.Posix.Env.
This commit was sponsored by Fernando Jimenez on Patreon.
Chose to make this only handle files actively being downloaded, not temp
files for downloads that were interrupted or files that have been fully
downloaded.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Test suite is always included.
Building with this flag disabled has actually been broken for some time,
since Command.TestRemote uses tasty. Fewer build flags are better, so good
time to drop it.
This commit was sponsored by Thomas Hochstein on Patreon.
A top-level .noannex file will prevent git-annex init from being used in a
repository. This is useful for repositories that have a policy reason not
to use git-annex. The content of the file will be displayed to the user who
tries to run git-annex init.
This also affects git annex reinit and initialization via the webapp.
It does not affect automatic inits, when there's a sibling git-annex branch
already.
This commit was supported by the NSF-funded DataLad project.
lookupkey: Support being given an absolute filename to a file within the
current git repository.
This commit was supported by the NSF-funded DataLad project.
initremote, enableremote: Really support gpg subkeys suffixed with an
exclamation mark, which forces gpg to use a specific subkey. (Previous try
had a bug.)
This commit was sponsored by Jake Vosloo on Patreon.
Better to make it not be surprising and slow, than surprising and fast.
--raw can be used when it needs to be really fast.
Implemented adding a youtube-dl supported url to an existing file.
This commit was sponsored by andrea rota.
Fully working, including --fast/--relaxed.
Note that, while git-annex addurl --relaxed is not going to check
youtube-dl, I kept git annex importfeed --relaxed checking it.
Thinking is that, let's not break people's importfeed cron jobs, and
importfeed does not typically have to check a large number of new items,
so it's ok if it's a little bit slower when used with youtube playlist
feeds.
importfeed's behavior is also improved (?) when a feed has links in it
to non-media files. Before, those were skipped. Now, the content of the
link is downloaded. This had to be done, because trying to use
youtube-dl is slow, and if those were skipped, it would have to check
every time importfeed was run. While this behavior change may not be
desirable for some feeds, that intersperse links to web pages with
enclosures, it will be desirable for other feeds, that have
non-enclosure directy links to media files.
Remove old quvi modules.
This commit was sponsored by Øyvind Andersen Holm.
As it was getting too expensive to patch out use of the "new" syscalls
We could revisit this if someone has hardware with an older kernel
that's still being maintained, but I've verified that the Synology
NAS that had used a too old kernel version has been updated to 2.6.32.
Was trying to rmdir the file, which had already been deleted, and when that
failed, it skipped trying to delete the parent directories.
Noticed the bug through testremote, but it can't itself detect such
problems as there is no enumeration in the API.
This commit was sponsored by Brock Spratlen on Patreon.
As long as the class of remotes supports exporting, it's tested whether
or not the remote is configured with exporttree=yes.
Also, made testremote of a remote configured with exporttree=yes
disable that configuration for testing non-export storage.
This commit was supported by the NSF-funded DataLad project.
When there are multiple urls for a file, still treat it as being present
in the web when some urls don't work, as long as at least one url does
work.
This is consistent with the other web methods handling of multiple urls.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Actual problem is the keyName was set to "Ref \"sha\"", which led to
this follow-on failure since it contained a space.
The bad data would also get into the export database when exporting to a
non-external special remote. Looking briefly at that, I don't think the bad
data will lead to anything more than a re-upload of the file content
now that the problem has been fixed.
This commit was sponsored by Peter Hogg on Patreon.
Seems I forgot to fully test that feature when documenting it.
git rev-parse needs a colon after a branch to de-reference the tree
it points to, rather than the commit. But that had it adding an extra
colon when the user specified "branch:subdir". So, check if there is a
colon before adding one.
This commit was sponsored by Francois Marier on Patreon.
Windows: Fix reversion that caused the path used to link to annexed
content include the drive letter and full path, rather than being
relative. (`git annex fix` will fix up after this problem).
I've not identified the commit that brought the reversion (probably it
happened this spring when I was removing MisingH and last touched
Utility.Path). Likely commit 18b9a4b8024115db67ae309fdaf54e1553037529?
The problem is that relPathDirToFile got called two paths that had the
slashes different ways around. Since takeDrive includes the first slash,
this made two paths on the same drive seem different and it bailed.
(ifdefs around this to avoid doing extra work on non-windows)
This commit was sponsored by Jack Hill on Patreon.
Get ugly reversion out of CHANGELOG.
Also, relocated the windows stack.yaml to top, and updated windows build
instructions.
This commit was sponsored by Henrik Riomar on Patreon.
wget was broken even in the previous old release of the windows bundle,
this is not new breakage. msys-idn-11.dll and probably more would be needed
to use it. git for windows includes msys-idn2-0.dll instead.
Code for terminating processes on Windows is not linking anymore;
made a warning be displayed instead. This breaks restarting the
assistant and git annex assistant --stop.
I hope to see the code added to the Win32 library, where it should fit
better and should avoid whatever problem is making the linker not like it
when included in git-annex. I opened an issue requesting its addition,
here: https://github.com/haskell/win32/issues/91
This commit was sponsored by Thomas Hochstein on Patreon.
This avoids all the complication about redundant work discussed in
the previous try at fixing this. At the expense of needing each command
that could have the problem to be patched to simply wrap the action in
onlyActionOn once the key is known. But there do not seem to be many
such commands.
onlyActionOn' should not be used with a CommandStart (or CommandPerform),
although the types do allow it. onlyActionOn handles running the whole
CommandStart chain. I couldn't immediately see a way to avoid mistken
use of onlyActionOn'.
This commit was supported by the NSF-funded DataLad project.
After a false start, I found a fairly non-intrusive way to deal with it.
Although it only handles transfers -- there may be issues with eg
concurrent dropping of the same key, or other operations.
There is no added overhead when -J is not used, other than an added
inAnnex check. When -J is used, it has to maintain and check a small
Set, which should be negligible overhead.
It could output some message saying that the transfer is being done by
another thread. Or it could even display the same progress info for both
files that are being downloaded since they have the same content. But I
opted to keep it simple, since this is rather an edge case, so it just
doesn't say anything about the transfer of the file until the other
thread finishes.
Since the deferred transfer action still runs, actions that do more than
transfer content will still get a chance to do their other work. (An
example of something that needs to do such other work is P2P.Annex,
where the download always needs to receive the content from the peer.)
And, if the first thread fails to complete a transfer, the second thread
can resume it.
But, this unfortunately means that there's a risk of redundant work
being done to transfer a key that just got transferred.
That's not ideal, but should never cause breakage; the same
thing can occur when running two separate git-annex processes.
The get/move/copy/mirror --from commands had extra inAnnex checks added,
inside the download actions. Without those checks, the first thread
downloaded the content, and then the second thread woke up and
downloaded the same content redundantly.
move/copy/mirror --to is left doing redundant uploads for now. It
would need a second checkPresent of the remote inside the upload
to avoid them, which would be expensive. A better way to avoid
redundant work needs to be found..
This commit was supported by the NSF-funded DataLad project.
git annex add, git annex lock etc make multiple seek passes,
and each seek pass checked that files existed. That was unncessary
redundant work.
Fixed by adding a new WorkTreeItem type, make seek actions use it,
and check that the files exist when constructing it.
This commit was supported by the NSF-funded DataLad project.
Before, there was a window where interrupting an add could result in the
file being moved into the annex, with no symlink yet created.
This commit was supported by the NSF-funded DataLad project.
when storing files there, since that collection is created by initremote.
(This seems to work around some brokenness of the box.com webdav server
which was entering a redirect loop.)
Note that the fix makes locationParent return Nothing instead of "."
when there's no parent directory between the path and the top of the webdav
repo.
This commit was sponsored by André Pereira on Patreon.
In my git-annex repos, I found some stale transfer info files
without lock files.
Pass a mode to tryLockExclusive, so it will create the lock file if
not present, and so not fail to clean up such transfer info files.
Normally, transfer info files are accompanied by a lock file.
But, when alwaysRunTransfer is used, the locking can fail
and it will still write the transfer info file. Perhaps there are other
cases too? Note that mkProgressUpdater's meter
writes to the transfer info file too, and it might be possible for
that meter to fire after runTransfer has cleaned up.
This commit was sponsored by andrea rota.
Fix process and file descriptor leak that was exposed when git-annex was
built with ghc 8.2.1. Apparently ghc has changed its behavior of GC
of open file handles that are pipes to running processes. That
broke git-annex test on OSX due to running out of FDs.
Audited for all uses of Annex.new and made stopCoProcesses be called
once it's done with the state. Fixed several places that might have
leaked in other situations than running the test suite.
This commit was sponsored by Ewen McNeill.
Using annexeval to run probeCrippledFileSystem' caused Git.CurrentRepo.get
to be run. Fixed easily since probeCrippledFileSystem' had no need to use
the Annex monad.
This commit was sponsored by Ethan Aubin.
When the external special remote program crashed, a newline
could be output, which messed up the expected output for --batch mode.
Avoid checking EXPORTSUPPORTED for special remotes that are
not configured to use exports. The datalad special remote apparently is/was
buggy and crashed on EXPORTSUPPORTED. Anyway, there's no need to send
it when the configuration doesn't need it.
This commit was supported by the NSF-funded DataLad project.
Also deletes any tagged pushes that the assistant might have done,
since those would also prevent resetting a branch back.
This commit was sponsored by andrea rota.
Motivation is to remove all metadata when it gets copied from a previous
version of the file, and that is not deisrable.
This commit was supported by the NSF-funded DataLad project.
This is similar to the pusher thread, but a separate thread because git
pushes can be done in parallel with exports, and updating a big export
should not prevent other git pushes going out in the meantime.
The exportThread only runs at most every 30 seconds, since updating an
export is more expensive than pushing. This may need to be tuned.
Added a separate channel for export commits; the committer records a
commit in that channel.
Also, reconnectRemotes records a dummy commit, to make the exporter
thread wake up and make sure all exports are up-to-date. So,
connecting a drive with a directory special remote export will
immediately update it, and getting online will automatically
update S3 and WebDAV exports.
The transfer queue is not involved in exports. Instead, failed
exports are retried much like failed pushes.
This commit was sponsored by Ewen McNeill.
Done to avoid a "tmp" directory appearing in webdav exports.
Also affects non-export webdav remotes, so interrupted uploads using the
old path will not overwrite it. However, PUT is quite likely to be
implemented atomically on web servers anyway, so I doubt this will cause
problems.
inDAVLocation does not url-escape, and so exporting a filename with spaces
to box.com at least resulted in a error 400.
It might also have affected storing keys on a webdav remote, if the key
contained a space or other problem character. Pretty unlikely.
I emailed Clint about the inDAVLocation gotcha, but seems best to fix it
here.
This commit was supported by the NSF-funded DataLad project.
webdav: Checking if a non-existent file is present on Box.com triggered a
bug in its webdav support that generates an infinite series of redirects.
It seems to redirect foo to foo/ to foo/index.php to
foo/index.php/index.php ... Why a webdav endpoint would behave this way
who knows.
Deal with such problems by assuming such behavior means the file is not
present.
Can't simply disable following redirects, because the webdav endpoint could
legitimately be redirected to a new endpoint. So, when this happens
10 redirects have to be followed, before it gives up and assumes this means
the file does not exist.
This commit was supported by the NSF-funded DataLad project.
This basically works, but there's a bug when renaming a file that leaves
a .git-annex-temp-content-key file in the webdav store, that never gets
cleaned up.
Also, exporting files with spaces to box.com seems to fail; perhaps it
does not support it?
This commit was supported by the NSF-funded DataLad project.
In a test, I uploaded a pdf, and several files were derived from it.
After removing the pdf, the derived files went away after approximatly
half an hour. This window does not seem worth warning about every time.
Documented it in the tip.
Removal works, only derives are a potential issue, so allow removing
with a warning. This way, unexporting a file works, and behavior is
consistent with IA remotes whether or not exporttree=yes.
Also tested exporting filenames containing unicode, spaces, underscores.
All worked, despite the IA's faq saying it doesn't.
This commit was sponsored by Trenton Cronholm on Patreon.
It opens a http connection per file exported, but then so does git
annex copy --to s3.
Decided not to munge exported filenames for IA. Too large a chance of
the munging having confusing results. Instead, export of files not
supported by IA, eg with spaces in their name, will fail.
This commit was supported by the NSF-funded DataLad project.
https://github.com/haskell/cabal/issues/4655
This means that when a module is conditionally imported via ifdef
depending on the OS or build flags, the cabal file has to mirror the
same logic there to only list the module then.
Since there are lots of OS's and lots of combinations of build flags
here, it's rather difficult to know if the cabal file has been completelty
correctly updated to match the source code.
So I am very unhappy with needing to update things in two places. I've
only tested this on linux with most build flags enables; this will
probably need significant time and testing to catch every cabal file
tweak that this change to Cabal requires. And it will be a continual
source of compile failures going forward when the code is modified and
the cabal file not also updated.
DRY DRY DRY, I repeat myself, but: DRY! Sigh..
(Also, had to remove all Build.* that are standalone programs from the
Other-Modules list, because since cabal passes those modules to ghc when
building git-annex, it complains that they use module Main. Those
modules are only used when building with the Makefile anyway, so this
change shouldn't break anything.)
This commit was sponsored by Thomas Hochstein on Patreon.
Security fix: Disallow hostname starting with a dash, which would get
passed to ssh and be treated an option. This could be used by an attacker
who provides a crafted ssh url (for eg a git remote) to execute arbitrary
code via ssh -oProxyCommand.
No CVE has yet been assigned for this hole.
The same class of security hole recently affected git itself,
CVE-2017-1000117.
Method: Identified all places where ssh is run, by git grep '"ssh"'
Converted them all to use a SshHost, if they did not already, for
specifying the hostname.
SshHost was made a data type with a smart constructor, which rejects
hostnames starting with '-'.
Note that git-annex already contains extensive use of Utility.SafeCommand,
which fixes a similar class of problem where a filename starting with a
dash gets passed to a program which treats it as an option.
This commit was sponsored by Jochen Bartl on Patreon.
Fix the external special remotes git-annex-remote-ipfs,
git-annex-remote-torrent and the example.sh template to correctly support
filenames with spaces.
This commit was sponsored by John Peloquin on Patreon.
External special remotes will refuse to operate on keys with spaces in
their names. That has never worked correctly due to the design of the
external special remote protocol. Display an error message suggesting
migration.
Not super happy with this, but it's a pragmatic solution. Better than
complicating the external special remote interface and all external special
remotes.
Note that I only made it use SafeKey in Request, not Response. git-annex
does not construct a Response, so that would not add any safety. And
presumably, if git-annex avoids feeding any such keys to an external
special remote, it will never have a reason to make a Response using such a
key. If it did, it would result in a protocol error anyway.
There's still a Serializeable instance for Key; it's used by P2P.Protocol.
There, the Key is always in the final position, so it's ok if it contains
spaces.
Note that the protocol documentation has been fixed to say that the File
may contain spaces. One way that can happen, even though the Key can't,
is when using direct mode, and the work tree filename contains spaces.
When sending such a file to the external special remote the worktree
filename is used.
This commit was sponsored by Thom May on Patreon.
To work around the problem that the external special remote protocol does
not support keys containing spaces.
This commit was sponsored by Denis Dzyubenko on Patreon.
Added remote configuration settings annex-ignore-command and
annex-sync-command, which are dynamic equivilants of the annex-ignore
and annex-sync configurations.
For this I needed a new DynamicConfig infrastructure. Its implementation
should be as fast as before when there is no dynamic config, and it caches
so shell commands are only run once.
Note that annex-ignore-command exits nonzero when the remote should be ignored.
While that may seem backwards, it allows using the same command for it as
for annex-sync-command when you want to disable both.
This commit was sponsored by Trenton Cronholm on Patreon.
By forking a worker process and only deleting the test directory once it exits.
This way, if a test leaves files open, they'll get closed when the worker
exits, so avoiding failure to delete open files on Windows, and failure to
delete directories due to NFS lock files.
If a test leaves a git worker process running, the closed pipes should
cause the worker to exit too, also avoiding the problem there. The 10
second sleep ought to give plenty of time for such worker processes to
exit, although this is of course a race.
Finally, even if test directory fails to be deleted still,
it won't appear as if the last test in the test suite failed; the error
will be displayed at the very end.
This commit was supported by the NSF-funded DataLad project.
Should fix this:
lock (v6 --force): FAIL
Exception: .git/annex/keys: removeDirectoryRecursive: unsatisfied constraints (Directory not empty)
Verified that the test case still catches the regression it's meant to.
This commit was supported by the NSF-funded DataLad project.
Can be used to override the default timestamps used in log files in the
git-annex branch. This is a dangerous environment variable; use with
caution.
Note that this only affects writing to the logs on the git-annex branch.
It is not used for metadata in git commits (other env vars can be set for
that).
There are many other places where timestamps are still used, that don't
get committed to git, but do touch disk. Including regular timestamps
of files, and timestamps embedded in some files in .git/annex/, including
the last fsck timestamp and timestamps in transfer log files.
A good way to find such things in git-annex is to get for getPOSIXTime and
getCurrentTime, although some of the results are of course false positives
that never hit disk (unless git-annex gets swapped out..)
So this commit does NOT necessarily make git-annex comply with some HIPPA
privacy regulations; it's up to the user to determine if they can use it in
a way compliant with such regulations.
Benchmarking: It takes 0.00114 milliseconds to call getEnv
"GIT_ANNEX_VECTOR_CLOCK" when that env var is not set. So, 100 thousand log
files can be written with an added overhead of only 0.114 seconds. That
should be by far swamped by the actual overhead of writing the log files
and making the commit containing them.
This commit was supported by the NSF-funded DataLad project.
QuickCheck added an Arbitrary instance for CTime aka EpochTime. However,
while git-annex's instance disallowed times before the epoch, QuickCheck's
does not. So, rather than using its instance, convert from an Integer.
This commit was sponsored by Thomas Hochstein on Patreon.
Don't trust OSX FSEvents's eventFlagItemModified to be called when the last
writer of a file closes it; apparently that sometimes does not happen,
which prevented files from being quickly added.
This commit was sponsored by John Peloquin on Patreon.
optparse-applicative-0.14.0.0 adds support for these, so have the
Makefile install their scripts when built with it.
CmdLine/GitAnnex/Options.hs now uses action "file" in cmdParams,
which affects the bash and zsh completions, letting them complete
filenames for subcommands that use that. This is not needed for
bash, since bash-completion.bash enables -o bashdefault, which
lets it complete filenames too. But it does not seem to break the bash
completions. It is needed for zsh; the zsh completion otherwise
does not complete filenames. The fish completion will always complete
filenames no matter what. Messy.
This commit was sponsored by Denis Dzyubenko on Patreon.
Previously, only sync branches were merged. This makes regular git push
into a repository watched by the assistant auto-merge.
While this does hardcode an assumption about what the remote tracking
branch is named, which some unusual git configurations won't match,
git-annex sync already made the same assumption.
Also, changed behavior when a tracking branch like
refs/remotes/synced/not/master is received. When on the master branch,
that used to get merged into it, but it's the tracking branch for
not/master, so should only be merged in when on the not/master branch.
This commit was sponsored by Ewen McNeill.
* Added annex.resolvemerge configuration, which can be set to false to
disable the usual automatic merge conflict resolution done by git-annex
sync and the assistant.
* sync: Added --no-resolvemerge option.
Note that disabling merge conflict resolution is probably not a good idea
in a direct mode repo or adjusted branch. Since updates to both are done
outside the usual work tree, if it fails the tree is not left in a
conflicted state, and it would be hard to manually resolve the conflict.
Still, made annex.resolvemerge be supported in those cases for consistency.
This commit was sponsored by Riku Voipio.
When setting metadata of a file that did not exist, no error message was
displayed, unlike getting metadata and most other git-annex commands. Fixed
this oversight.
Note that, if the file exists but is not annexed, there's no error.
This is the same behavior as other git-annex commands.
This commit was supported by the NSF-funded DataLad project.
* move --to=here moves from all reachable remotes to the local repository.
The output of move --from remote is changed slightly, when the remote and
local both have the content. It used to say:
move foo ok
Now:
move foo (from theremote...) ok
That was done so that, when move --to=here is used and the content is
locally present and also in several remotes, it's clear which remotes the
content gets dropped from.
Note that move --to=here will report an error if a non-reachable remote
contains the file, even if the local repository also contains the file. I
think that's reasonable; the user may be intending to move all other copies
of the file from remotes.
OTOH, if a copy of the file is believed to be present in some repository
that is not a configured remote, move --to=here does not report an error.
So a little bit inconsistent, but erroring in this case feels wrong.
copy --to=here came along for free, but it's basically the same behavior as
git-annex get, and probably with not as good messages in edge cases
(especially on failure), so I've not documented it.
This commit was sponsored by Anthony DeRobertis on Patreon.
See my comment. This only avoids the problem for -J; two git-annex
processes started at the same time could still both try to write to
.git/config and one fail. That would be very unlikely though, and it
doesn't really seem worth adding an additional layer of locking around
.git/config.
This commit was supported by the NSF-funded DataLad project.
orElse is great, but was not the right thing to use here because
waitTakeLock could retry for other reasons than the lock being held,
which made tryTakeLock fail when it shouldn't.
Instead, move the code to tryTakeLock and implement waitTakeLock using
tryTakeLock and retry.
(Also, in runTransfer, when checkSaneLock fails, dropLock to avoid leaking a
lock handle.)
This commit was supported by the NSF-funded DataLad project.
When built with concurrent-output 1.9, ssh password prompts will no longer
interfere with the -J display.
To avoid flicker, only done when ssh actually does need to prompt;
ssh is first run in batch mode and if that succeeds the connection is up
and no need to clear regions.
This commit was supported by the NSF-funded DataLad project.
Might want to remove this when it gets fixed, in case adjusted branches are
used in a repo with a great many refs, which would become unnecessarily
slow.
This commit was supported by the NSF-funded DataLad project.
Removed dependency on MissingH, instead depending on the split
library.
After laying groundwork for this since 2015, it
was mostly straightforward. Added Utility.Tuple and
Utility.Split. Eyeballed System.Path.WildMatch while implementing
the same thing.
Since MissingH's progress meter display was being used, I re-implemented
my own. Bonus: Now progress is displayed for transfers of files of
unknown size.
This commit was sponsored by Shane-o on Patreon.
When ssh connection caching is enabled (and when GIT_ANNEX_USE_GIT_SSH is
not set), only one ssh password prompt will be made per host, and only one
ssh password prompt will be made at a time.
This also fixes a race in prepSocket's stale ssh connection stopping
when run with -J. It was possible for one thread to start a cached ssh
connection, and another thread to immediately stop it, resulting in excess
connections being made.
This commit was supported by the NSF-funded DataLad project.
