importfeed: Use caching database to avoid needing to list urls on every
run, and avoid using too much memory.
Benchmarking in my podcasts repo, importfeed got 1.42 seconds faster,
and memory use dropped from 203000k to 59408k.
Database.ImportFeed is Database.ContentIdentifier with the serial number
filed off. There is a bit of code duplication I would like to avoid,
particularly recordAnnexBranchTree, and getAnnexBranchTree. But these use
the persistent sqlite tables, so despite the code being the same, they
cannot be factored out.
Since this database includes the contentidentifier metadata, it will be
slightly redundant if a sqlite database is ever added for metadata. I
did consider making such a generic database and using it for this. But,
that would then need importfeed to update both the url database and the
metadata database, which is twice as much work diffing the git-annex
branch trees. Or would entagle updating two databases in a complex way.
So instead it seems better to optimise the database that
importfeed needs, and if the metadata database is used by another command,
use a little more disk space and do a little bit of redundant work to
update it.
Sponsored-by: unqueued on Patreon
Speeds up sync in an adjusted branch by avoiding re-adjusting the branch
unncessarily, particularly when it is adjusted with --hide-missing or
--unlock-present.
When there are a lot of files, that was the majority of the time of a
--no-content sync.
Uses a log file, which is updated when content presence changes. This
adds a little bit of overhead to every file get/drop when on such an
adjusted branch. The overhead is minimal for get of any size of file,
but might be noticable for drop in some cases. It seems like a reasonable
trade-off. It would be possible to update the log file only at the end, but
then it would not happen if the command is interrupted.
When not in an adjusted branch, there should be no additional overhead.
(getCurrentBranch is an MVar read, and it avoids the MVar read of
getGitConfig.)
Note that this does not deal with situations such as:
git checkout master, git-annex get, git checkout adjusted branch,
git-annex sync. The sync won't know that the adjusted branch needs to be
updated. Dealing with that would add overhead to operation in non-adjusted
branches, which I don't like. Also, there are other situations like having
two adjusted branches that both need to be updated like this, and switching
between them and sync not updating.
This does mean a behavior change to sync, since it did previously deal
with those situations. But, the documentation did not say that it did.
The man pages only talk about sync updating the adjusted branch after
it transfers content.
I did consider making sync keep track of content it transferred (and
dropped) and only update the adjusted branch then, not to catch up to other
changes made previously. That would perform better. But it seemed rather
hard to implement, and also it would have problems with races with a
concurrent get/drop, which this implementation avoids.
And it seemed pretty likely someone had gotten used to get/drop followed by
sync updating the branch. It seems much less likely someone is switching
branches, doing get/drop, and then switching back and expecting sync to update
the branch.
Re-running git-annex adjust still does a full re-adjusting of the branch,
for anyone who needs that.
Sponsored-by: Leon Schuermann on Patreon
For simplicity, I've not tried to make it handle History yet, so when
there is a history, a full import will still be done. Probably the right
way to handle history is to first diff from the current tree to the last
imported tree. Then, diff from the current tree to each of the
historical trees, and recurse through the history diffing from child tree
to parent tree.
I don't think that will need a record of the previously imported
historical trees, and so Logs.Import doesn't store them. Although I did
leave room for future expansion in that log just in case.
Next step will be to change importTree to importChanges and modify
recordImportTree et all to handle it, by using adjustTree.
Sponsored-by: Brett Eisenberg on Patreon
Fix a hang that occasionally occurred during commands such as move.
(A bug introduced in 10.20220927, in
commit 6a3bd283b8)
The restage.log was kept locked while running a complex index refresh
action. In an unusual situation, that action could need to write to the
restage log, which caused a deadlock.
The solution is a two-stage process. First the restage.log is moved to a
work file, which is done with the lock held. Then the content of the work
file is read and processed, which happens without the lock being held.
This is all done in a crash-safe manner.
Note that streamRestageLog may not be fully safe to run concurrently
with itself. That's ok, because restagePointerFiles uses it with the
index lock held, so only one can be run at a time.
streamRestageLog does delete the restage.old file at the end without
locking. If a calcRestageLog is run concurrently, it will either see the
file content before it was deleted, or will see it's missing. Either is
ok, because at most this will cause calcRestageLog to report more
work remains to be done than there is.
Sponsored-by: Dartmouth College's Datalad project
When pointer files need to be restaged, they're first written to the
log, and then when the restage operation runs, it reads the log. This
way, if the git-annex process is interrupted before it can do the
restaging, a later git-annex process can do it.
Currently, this lets a git-annex get/drop command be interrupted and
then re-ran, and as long as it gets/drops additional files, it will
clean up after the interrupted command. But more changes are
needed to make it easier to restage after an interrupted process.
Kept using the git queue to run the restage action, even though the
list of files that it builds up for that action is not actually used by
the action. This could perhaps be simplified to make restaging a cleanup
action that gets registered, rather than using the git queue for it. But
I wasn't sure if that would cause visible behavior changes, when eg
dropping a large number of files, currently the git queue flushes
periodically, and so it restages incrementally, rather than all at the
end.
In restagePointerFiles, it reads the restage log twice, once to get
the number of files and size, and a second time to process it.
This seemed better than reading the whole file into memory, since
potentially a huge number of files could be in there. Probably the OS
will cache the file in memory and there will not be much performance
impact. It might be better to keep running tallies in another file
though. But updating that atomically with the log seems hard.
Also note that it's possible for calcRestageLog to see a different file
than streamRestageLog does. More files may be added to the log in
between. That is ok, it will only cause the filterprocessfaster heuristic to
operate with slightly out of date information, so it may make the wrong
choice for the files that got added and be a little slower than ideal.
Sponsored-by: Dartmouth College's DANDI project
WIP: This is mostly complete, but there is a problem: createDirectoryUnder
throws an error when annex.dbdir is set to outside the git repo.
annex.dbdir is a workaround for filesystems where sqlite does not work,
due to eg, the filesystem not properly supporting locking.
It's intended to be set before initializing the repository. Changing it
in an existing repository can be done, but would be the same as making a
new repository and moving all the annexed objects into it. While the
databases get recreated from the git-annex branch in that situation, any
information that is in the databases but not stored in the branch gets
lost. It may be that no information ever gets stored in the databases
that cannot be reconstructed from the branch, but I have not verified
that.
Sponsored-by: Dartmouth College's Datalad project
The purpose of this is to fix situations where the annex object file is
stored in a directory structure other than where annex symlinks point to.
But it will also move object files from the hashdirmixed back to
hashdirlower if the repo configuration makes that the normal location.
It would have been more work to avoid that than to let it do it.
Sponsored-by: Dartmouth College's Datalad project
The problem is that withContentLockFile, in a v8 repo, has to take a shared
lock of `.git/annex/content.lck`. But, in a readonly repository, if that
file does not yet exist, it cannot lock it. And while it will sometimes
work to `chmod +r .git/annex`, the repository might be readonly due to
being owned by another user, or due to being mounted readonly.
So, it seems that the only solution is to use some other file than
`.git/annex/content.lck` as the lock file. The inode sential file
was almost the only option that should always exist. (And if it somehow
does not exist, creating an empty one for locking will be ok.)
Wow, what a hack!
Sponsored-by: Dartmouth College's Datalad project
The v10 upgrade should almost be safe now. What remains to be done is
notice when the v10 upgrade has occurred, while holding the shared lock,
and switch to using v10 lock files.
Sponsored-by: Dartmouth College's Datalad project
The upgrade from V9 uses this to avoid an automatic upgrade until 1 year
after the V9 update. It can also be used in future such situations.
Sponsored-by: Dartmouth College's Datalad project
To avoid mistakes like commit 0ccbed4f6f,
be explicit about the two variants of this.
Incidentially avoids a small amount of overhead in calling reverse.
Sponsored-by: Shae Erisson on Patreon
Fix a bug that prevented getting content from a repository that started out
as a bare repository, or had annex.crippledfilesystem set, and was
converted to a non-bare repository.
This unfortunately means that inAnnex check gets slowed down by a stat call
in normal repos when the content is not present. Oh well, such is the cost
of backwards compatability with old mistakes.
Sponsored-by: Mark Reidenbach on Patreon
This adds a separate journal, which does not currently get committed to
an index, but is planned to be committed to .git/annex/index-private.
Changes that are regarding a UUID that is private will get written to
this journal, and so will not be published into the git-annex branch.
All log writing should have been made to indicate the UUID it's
regarding, though I've not verified this yet.
Currently, no UUIDs are treated as private yet, a way to configure that
is needed.
The implementation is careful to not add any additional IO work when
privateUUIDsKnown is False. It will skip looking at the private journal
at all. So this should be free, or nearly so, unless the feature is
used. When it is used, all branch reads will be about twice as expensive.
It is very lucky -- or very prudent design -- that Annex.Branch.change
and maybeChange are the only ways to change a file on the branch,
and Annex.Branch.set is only internal use. That let Annex.Branch.get
always yield any private information that has been recorded, without
the risk that Annex.Branch.set might be called, with a non-private UUID,
and end up leaking the private information into the git-annex branch.
And, this relies on the way git-annex union merges the git-annex branch.
When reading a file, there can be a public and a private version, and
they are just concacenated together. That will be handled the same as if
there were two diverged git-annex branches that got union merged.
Keys stored on the filesystem are mangled by keyFile to avoid problem
chars. So, that mangling has to be reversed when parsing files from a
borg backup back to a key.
The directory special remote also so mangles them. Some other special
remotes do not; eg S3 just serializes the key -- but S3 object names are
not limited to filesystem valid filenames anyway, so a S3 server must
not map them directly to files in any case. It seems unlikely that a
borg backup of some such special remote will get broken by this change.
This commit was sponsored by Graham Spencer on Patreon.
nukeFile replaced with removeWhenExistsWith removeLink, which allows
using RawFilePath. Utility.Directory cannot use RawFilePath since setup
does not depend on posix.
This commit was sponsored by Graham Spencer on Patreon.
Notable wins in Annex.Locations which was sometimes doing 6 conversions
in a single function call.
This commit was sponsored by Denis Dzyubenko on Patreon.
In cases where numcopies checks prevented the resumed move from dropping
the object from the source repository, it now relies on a log of recent
moves to replicate the behavior of the interrupted command.
Performance: Probably noticable impact, since it has to add to the log,
check the log, and remove from the log. Seems worth it to avoid this
annoying edge case. The log functions are pretty well optimised to avoid
unncessary work.
An performance improvement to make later would be to avoid cleanup doing
anything if it's not written to the log file, and has confirmed that the
log file does not contain the log line.
This commit was sponsored by Jake Vosloo on Patreon.
This was originally added so that unannex could prevent the hook from
running while files were in a state that the hook would interpret as
old-style unlocked and so would lock.
Now that's gone, so the only thing the hook was preventing was two
pre-commit processes running simulantaneously. But such concurrency
is normal in git-annex and should not be a problem.
Does mean that .git/hooks/pre-commit-annex might run more concurrently,
that seems the only risk of it causing any problems.
Remove dup definitions and just use the RawFilePath one. </> etc are
enough faster that it's probably faster than building a String directly,
although I have not benchmarked.
git-annex find is now RawFilePath end to end, no string conversions.
So is git-annex get when it does not need to get anything.
So this is a major milestone on optimisation.
Benchmarks indicate around 30% speedup in both commands.
Probably many other performance improvements. All or nearly all places
where a file is statted use RawFilePath now.
Adds a dependency on filepath-bytestring, an as yet unreleased fork of
filepath that operates on RawFilePath.
Git.Repo also changed to use RawFilePath for the path to the repo.
This does eliminate some RawFilePath -> FilePath -> RawFilePath
conversions. And filepath-bytestring's </> is probably faster.
But I don't expect a major performance improvement from this.
This is mostly groundwork for making Annex.Location use RawFilePath,
which will allow for a conversion-free pipleline.
Since the sqlite branch uses blobs extensively, there are some
performance benefits, ByteStrings now get stored and retrieved w/o
conversion in some cases like in Database.Export.
Finally builds (oh the agoncy of making it build), but still very
unmergable, only Command.Find is included and lots of stuff is badly
hacked to make it compile.
Benchmarking vs master, this git-annex find is significantly faster!
Specifically:
num files old new speedup
48500 4.77 3.73 28%
12500 1.36 1.02 66%
20 0.075 0.074 0% (so startup time is unchanged)
That's without really finishing the optimization. Things still to do:
* Eliminate all the fromRawFilePath, toRawFilePath, encodeBS,
decodeBS conversions.
* Use versions of IO actions like getFileStatus that take a RawFilePath.
* Eliminate some Data.ByteString.Lazy.toStrict, which is a slow copy.
* Use ByteString for parsing git config to speed up startup.
It's likely several of those will speed up git-annex find further.
And other commands will certianly benefit even more.
Goal is to make git-annex faster by using ByteString for all the
worktree traversal. For now, this is focusing on Command.Find,
in order to benchmark how much it helps. (All other commands are
temporarily disabled)
Currently in a very bad unbuildable in-between state.
This will speed up the common case where a Key is deserialized from
disk, but is then serialized to build eg, the path to the annex object.
Previously attempted in 4536c93bb2
and reverted in 96aba8eff7.
The problems mentioned in the latter commit are addressed now:
Read/Show of KeyData is backwards-compatible with Read/Show of Key from before
this change, so Types.Distribution will keep working.
The Eq instance is fixed.
Also, Key has smart constructors, avoiding needing to remember to update
the cached serialization.
Used git-annex benchmark:
find is 7% faster
whereis is 3% faster
get when all files are already present is 5% faster
Generally, the benchmarks are running 0.1 seconds faster per 2000 files,
on a ram disk in my laptop.
Delete the old export dbs on upgrade.
Testing this an exporting to a directory with both exporttree=yes and
importtree=yes, it refused to let an interrupted export proceed after
upgrade, with "unsafe to overwrite file". An import resolved the
problem.
It will be populated automatically by the next command that needs data
from it, the same way it gets populated in a fresh clone. That may be a
little expensive, but it's a one time cost, and no slower than in a
fresh clone.
The old db is cleaned up when a new incremental fsck is started.
The incremental fsck won't pick up where the old one left off, but I
consider this a minor enough thing that it can just be documented and
won't be a problem.
Renamed the database to .git/annex/keysdb;
the old .git/annex/keys gets deleted during the upgrade.
It is possible that an old git-annex process is running during the
upgrade. If so, it will be able to continue using the old keys db until the
upgrade is complete, and then will presumably fail in some ugly way. Or
perhaps the upgrade will be unable to delete the open files on some
systems, and so fail with an ugly error message.
It's also possible for multiple processes to be running the upgrade
concurrently. That should be fine; they will both write the same
information into the keys db.
Other databases still need to be upgraded.
This brings back .git/annex/misctmp, but only for init. If an init
is interrupted while probing using that temp directory, the files it left
will get deleted 1 week later by a subsequent git-annex run.
Prevents merging the import from deleting the non-preferred files from
the branch it's merged into.
adjustTree previously appended the new list of items to the old, which
could result in it generating a tree with multiple files with the same
name. That is not good and confuses some parts of git. Gave it a
function to resolve such conflicts.
That allowed dealing with the problem of what happens when the import
contains some files (or subtrees) with the same name as files that were
filtered out of the export. The files from the import win.
