init: Fix a crash when the repo's was cloned from a repo that had an
adjusted branch checked out, and the origin remote is not named "origin".
The only other hardcoding of the name of origin is in:
- Upgrade.V2, which can be ignored probably
- Annex.Branch, which doesn't fail if it has some other name, but just
doesn't set up the git-annex branch with quite as linear a history in
that case.
Reads of cached data are not debugged, only cache misses are, and since
many commands pre-cache location log data, this avoids a slew of
fastDebug calls when running commands such as git-annex get --from
Had to add to AnnexRead an indication of whether debugging is enabled.
Could have just made setupConsole not install a debug output action that
outputs, and have enableDebug be what installs that, but then in the
common case where there is no debug selector, and so all debug output is
selected, it would run the debug output action every time, which entails
an IORef access. Which would make fastDebug too slow..
Most of the changes here involve global option parsing: GlobalSetter
changed so it can both run an Annex action to set state, but can also
change the AnnexRead value, which is immutable once the Annex monad is
running.
That allowed a debugselector value to be added to AnnexRead, seeded
from the git config. The --debugfilter option's GlobalSetter then updates
the AnnexRead.
This improved GlobalSetter can later be used to move more stuff to
AnnexRead. Things that don't involve a git config will be easier to
move, and probably a *lot* of things can be moved eventually.
fastDebug, while implemented, is not used anywhere yet. But it should be
fast..
This uses a DebugSelector, rather than debug levels, which will allow
for a later option like --debug-from=Process to only
see debuging about running processes.
The module name that contains the thing being debugged is used as the
DebugSelector (in most cases; does not need to be a hard and fast rule).
Debug calls were changed to add that. hslogger did not display
that first parameter to debugM, but the DebugSelector does get
displayed.
Also fastDebug will allow doing debugging in places that are used in
tight loops, with the DebugSelector coming from the Annex Reader
essentially for free. Not done yet.
Values in AnnexRead can be read more efficiently, without MVar overhead.
Only a few things have been moved into there, and the performance
increase so far is not likely to be noticable.
This is groundwork for putting more stuff in there, particularly a value
that indicates if debugging is enabled.
The obvious next step is to change option parsing to not run in the
Annex monad to set values in AnnexState, and instead return a pure value
that gets stored in AnnexRead.
When git-annex transferrer started up, and the journal contained something,
it would commit it to the git-annex branch. This caused excess commits to
the branch, in cases where normally several changes would be journalled and
committed together. That generated some excess git objects and was also
just noisy on stdout.
Since transferrer uses enableInteractiveBranchAccess, it does not need to
commit journalled changes, since the optimisation that avoids checking
the journal when reading from the branch is disabled for processes that
call that.
This commit was sponsored by Svenne Krap on Patreon.
Keys stored on the filesystem are mangled by keyFile to avoid problem
chars. So, that mangling has to be reversed when parsing files from a
borg backup back to a key.
The directory special remote also so mangles them. Some other special
remotes do not; eg S3 just serializes the key -- but S3 object names are
not limited to filesystem valid filenames anyway, so a S3 server must
not map them directly to files in any case. It seems unlikely that a
borg backup of some such special remote will get broken by this change.
This commit was sponsored by Graham Spencer on Patreon.
New error message:
Remote foo not usable by git-annex; setting annex-ignore
http://localhost/foo/config download failed: Configuration of annex.security.allowed-ip-addresses does not allow accessing address ::1
If git config parse fails, or the git config file is not available at the url,
a better error message for that is also shown.
This commit was sponsored by Mark Reidenbach on Patreon.
Seems that hasOrigin was never finding origin's git-annex branch, so a new
one got created each time. And so then it later needed to merge the two
branches, which is expensive.
Added --no-track to git branch to avoid it displaying a message about
setting up tracking branches. Of course there's no reason to make the
git-annex branch a tracking branch since git-annex auto-merges it.
Can beet to false to avoid some expensive things needed to support unlocked
files.
See my comment for why this only controls what init sets up, and not other
behavior.
I didn't bother with making the v5 upgrade code path look at this, though
it easily could, because the docs say to run git-annex init after setting
it to make it take effect.
Not yet used, but allows getting the size of items in the tree fairly
cheaply.
I noticed that CmdLine.Seek uses ls-tree and the feeds the files into
another long-running process to check their size. That would be an
example of a place that might be sped up by using this. Although in that
particular case, it only needs to know the size of unlocked files, not
locked. And since enabling --long probably doubles the ls-tree runtime
or more, the overhead of using it there may outwweigh the benefit.
When autoenabling special remotes of type S3, weddav, or glacier, do not
take login credentials from environment variables, as the user may not be
expecting the autoenable to happen, and may have those set for other
purposes.
This solves the problem that import of such files gets confused and
converts them back to annexed files.
The import code already used GIT keys internally when it determined a
file should not be annexed. So now when it sees a GIT key that export
used, it already does the right thing.
This also means that even older version of git-annex can import and will
do the right thing, once a fixed version has exported. Still, there may
be other complications around upgrades; still need to think it all
through.
Moved gitShaKey and keyGitSha from Key to Annex.Export since they're
only used for export/import.
Documented GIT keys in backends, since they do appear in the git-annex
branch now.
This commit was sponsored by Graham Spencer on Patreon.
Added LinkType to ProvidedInfo, and unified MatchingKey with
ProvidedInfo. They're both used in the same way, so there was no real
reason to keep separate.
Note that addLocked and addUnlocked still set matchNeedsFileName,
because to handle MatchingFile, they do need it. However, they
don't use it when MatchingInfo is provided. This should be ok,
the --branch case will be able skip checking matchNeedsFileName,
since it will provide a filename in any case.
Checksum as content is received from a remote git-annex repository, rather
than doing it in a second pass.
Not tested at all yet, but I imagine it will work!
Not implemented for any special remotes, and also not implemented for
copies from local remotes. It may be that, for local remotes, it will
suffice to use rsync, rely on its checksumming, and simply return Verified.
(It would still make a checksumming pass when cp is used for COW, I guess.)
When annex.stalldetection is not enabled, and a likely stall is detected,
display a suggestion to enable it.
Note that the progress meter display is not taken down when displaying
the message, so it will display like this:
0% 8 B 0 B/s
Transfer seems to have stalled. To handle stalling transfers, configure annex.stalldetection
0% 10 B 0 B/s
Although of course if it's really stalled, it will never update
again after the message. Taking down the progress meter and starting
a new one doesn't seem too necessary given how unusual this is,
also this does help show the state it was at when it stalled.
Use of uninterruptibleCancel here is ok, the thread it's canceling
only does STM transactions and sleeps. The annex thread that gets
forked off is separate to avoid it being canceled, so that it
can be joined back at the end.
A module cycle required moving from dupState the precaching of the
remote list. Doing it at startConcurrency should cover all the cases
where the remote list is used in concurrent actions.
This commit was sponsored by Kevin Mueller on Patreon.
annex.stalldetection can now be set to "true" to make git-annex do
automatic stall detection when it detects a remote is updating its transfer
progress consistently enough.
This commit was sponsored by Luke Shumaker on Patreon.
Missed this when implementing it because of the default case catching
the new constructor. So, removed that default case to make sure
future types of adjusted branches don't make the same mistake.
Complicated by git-annex addurl --fast which adds the file whose content
is not present, so it needs to stay unlocked when on such a branch.
This commit was sponsored by Brock Spratlen on Patreon.
This avoids the smudge --clean filter failing on the URL keys.
git checkout runs the post-checkout hook, which runs smudge --update.
That populates all the pointer files, but it neglected to store their inode
caches in the keys db. With that done, and the keys db flushed before
smudge --clean gets run (by restagePointerFile), the isUnmodifiedCheap
check can tell the file is not modified, so will not try to re-ingest it,
which does not work with URL keys because they do not support genKey.
It also seems possible that the isUnmodifiedCheap was also failing for
non-URL keys, which would cause them to be re-ingested, leading to a lot of
extra work. I have not verified that, but don't see why it wouldn't have
happened. So this probably also speeds up checking out adjusted branches.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
This is probably a reversion, but not sure what caused it. By the time
Annex.Init runs fixupUnusualReposAfterInit, another git-annex process has
at least sometimes already done the necessary fixups. (Eg, one run
indirectly by a git command.) But since the Repo is cached, it doesn't
realize and does them again. So, avoid crashing when git config --unset
fails.
This commit was sponsored by Jack Hill on Patreon.
This is conceptually very simple, just making a 1 that was hard coded be
exposed as a config option. The hard part was plumbing all that, and
dealing with complexities like reading it from git attributes at the
same time that numcopies is read.
Behavior change: When numcopies is set to 0, git-annex used to drop
content without requiring any copies. Now to get that (highly unsafe)
behavior, mincopies also needs to be set to 0. It seemed better to
remove that edge case, than complicate mincopies by ignoring it when
numcopies is 0.
This commit was sponsored by Denis Dzyubenko on Patreon.
* add: Significantly speed up adding lots of non-large files to git,
by disabling the annex smudge filter when running git add.
* add --force-small: Run git add rather than updating the index itself,
so any other smudge filters than the annex one that may be enabled will
be used.
Especially from borg, where the content identifier logs
all end up being the same identical file!
But also, for other imports, the location tracking logs can,
in some cases, be identical files.
Bonus optimisation: Avoid looking up (and parsing when set)
GIT_ANNEX_VECTOR_CLOCK env var every time a log is written to.
Although the lookup does happen at startup even when no
log will be written now.
May actually work now.
Note that, importKey now has to add the size to the key if it's supposed
to have size. Remote.Directory relied on the importer adding the size,
which is no longer done, so it was changed; it was the only one.
This way, importKey does not need to behave differently between regular
and thirdpartypopulated imports.
These don't have importTree in their config, because they don't support
tree import, but they do still support import, and do not support export
or key/value modification.
This is to support, eg a borg repo as a special remote, which is
populated not by running git-annex commands, but by using borg. Then
git-annex sync lists the content of the remote, learns which files are
annex objects, and treats those as present in the remote.
So, most of the import machinery is reused, to a new purpose. While
normally importtree maintains a remote tracking branch, this does not,
because the files stored in the remote are annex object files, not
user-visible filenames. But, internally, a git tree is still generated,
of the files on the remote that are annex objects. This tree is used
by retrieveExportWithContentIdentifier, etc. As with other import/export
remotes, that the tree is recorded in the export log, and gets grafted
into the git-annex branch.
importKey changed to be able to return Nothing, to indicate when an
ImportLocation is not an annex object and so should be skipped from
being included in the tree.
It did not seem to make sense to have git-annex import do this, since
from the user's perspective, it's not like other imports. So only
git-annex sync does it.
Note that, git-annex sync does not yet download objects from such
remotes that are preferred content. importKeys is run with
content downloading disabled, to avoid getting the content of all
objects. Perhaps what's needed is for seekSyncContent to be run with these
remotes, but I don't know if it will just work (in particular, it needs
to avoid trying to transfer objects to them), so I skipped that for now.
(Untested and unused as of yet.)
This commit was sponsored by Jochen Bartl on Patreon.
Don't want to try to use these remotes as key/value remotes, which will
surely fail. It only recently became possible for importtree to be set
w/o exporttree, so before this code was ok.
(cherry picked from commit 97599cb0f7f4115aa5a3e81a91ee3d1d6c52dc84)
And vice-versa, but it's better to use '/' for portability.
Notably, standardPreferredContent contains "archive/*" and that might not
match if the filename ends up coming in with the slashes the other way
around.
git -c was already propagated via environment, but need this for
consistency.
Also, notice it does not use gitAnnexChildProcess to run the
transferrer. So nothing is done about avoid it taking the
pid lock. It's possible that the caller is already doing something that
took the pid lock, and if so, the transferrer will certianly fail,
since it needs to take the pid lock too. This may prevent combining
annex.stalldetection with annex.pidlock, but I have not verified it's
really a problem. If it was, it seems git-annex would have to take
the pid lock when starting a transferrer, and hold it until shutdown,
or would need to take pid lock when starting to use a transferrer,
and hold it until done with a transfer and then drop it. The latter
would require starting the transferrer with pid locking disabled for the
child process, so assumes that the transferrer does not do anyting that
needs locking when not running a transfer.
MatchingKey is not the thing to use when matching on actual worktreee
files.
Fix reversion in 8.20201116 that made include= and exclude= in
preferred/required content expressions match a path relative to the current
directory, rather than the path from the top of the repository.
* Guard against running in a repo where annex.uuid is set but
annex.version is set, or vice-versa.
* Avoid autoinit when a repo does not have annex.version or annex.uuid
set, but has a git-annex objects directory, suggesting it was used
by git-annex before.
When fully stalled, the progress bar doesn't update, so waiting on a
MVar would block forever. There's no need to wait anyway, just wake up
after sleeping the configured period and check the current value.
Luckily Viasat makes it really easy for me to notice this kind of
mistake, by stalling long TCP connections frequently.
Done on unix, could not implement it on windows quite.
The signal library gets part of the way needed for windows.
But I had to open https://github.com/pmlodawski/signal/issues/1 because
it lacks raiseSignal.
Also, I don't know what the equivilant of getProcessGroupIDOf is on
windows. And System.Process does not provide a way to send any signal to
a process group except for SIGINT.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
All callers adjusted to update it themselves.
In Command.ReKey, and Command.SetKey, the cleanup action already did,
so it was updating the log twice before.
This fixes a bug when annex.stalldetection is set, as now
Command.Transferrer can skip updating the location log, and let it be
updated by the calling process.
Rather than using Read/Show, which would force me to preserve data types
into the future.
I considered just deriving json and sending that, but I don't much like
deriving json with data types that have named constructors (like Key
does) because again it locks in data type details.
So instead, used SimpleProtocol, with a fairly complex and unreadable
protocol. But it is as efficient as the p2p protocol at least, and as
future proof.
(Writing my own custom json instances would have worked but I thought
of it too late and don't want to do all the work twice. The only real
benefit might be that aeson could be faster.)
Note that, when a new protocol request type is added later, git-annex
trying to use it will cause the git-annex transferrer to display a
protocol error message. That seems ok; it would only happen if a new
git-annex found an old version of itself in PATH or the program
file. So it's unlikely, and all it can do anyway is display an error.
(The error message could perhaps be improved..)
This commit was sponsored by Jack Hill on Patreon.
Doing this at shutdown is not very important at all, but I do like to
make sure that when git-annex allocates a resource, it later cleans it
up.
More importantly, stopCoProcesses is used in eg, Remote.Git in a
situation where it needs to stop long-running processes like these.
This is to avoid breakage when upgrading or downgrading git-annex with a
process running that uses the interface. It's better to keep the
compatability code for a few years than worry about such breakage.
This commit was sponsored by Brett Eisenberg on Patreon.
New config annex.stalldetection, remote.name.annex-stalldetection, which
can be used to deal with remotes that stall during transfers, or are
sometimes too slow to want to use.
This commit was sponsored by Luke Shumaker on Patreon.
There is redundant code in the assistant that does the same thing,
but that code uses a PID, not a ProcessHandle, and gets the PID from,
apparently, the TransferInfo transferPid (although I can't seem to find
where that gets set on non-windows).
Seems to work! Even progress bars. Have not tested prompting or various
error message displays yet.
transferkeys had to be made to operate in different modes for the
Assistant and Annex monads. A bit ugly, but it did relegate that
really ugly Database.Keys.closeDb in transferkeys to only the assistant
code path.
This commit was sponsored by Noam Kremen.
This is groundwork for using git-annex transferkeys to run transfers,
in order to allow stalled transfers to be interrupted and retried.
The new upload and download are closer to what git-annex transferkeys
does, so the plan is to make them use it.
Then things that were left using upload' and download' won't recover
from stalls. Notably, that includes import and export. But
at least get/move/copy will be able to. (Also the assistant hopefully,
but not yet.)
This commit was sponsored by Jake Vosloo on Patreon.
This old code will now be useful for git-annex beyond the assistant.
git-annex won't use the CheckTransferrer part, and won't run transferkeys
as a batch process, and will want withTransferrer to not shut down
transferkeys processes. Still, the rest of this is a good fit for what I
need now.
Also removed some dead code, and simplified a little bit.
This commit was sponsored by Mark Reidenbach on Patreon.
It's not concurrent-output safe, and doesn't support
--json-error-messages.
Using Annex.makeRunner is a bit scary, because what if it's run in a
different thread from an active annex action? Normally the same Annex
state is not used concurrently in several threads, and it's not designed
to be fully concurrency safe. (Annex.Concurrent exists to deal with
that.) I think it will be ok in these simple cases though. Eg,
when buffering a warning message to json, Annex.changeState is used,
and it modifies the MVar in a concurrency safe way.
The only warningIO remaining is not a problem.
"a:" failed; this test wants a relative filename so isDrive avoids it
Note that on linux, isDrive "/foo" is true. This test also filters out
absolute paths already, so that is ok.
This commit was sponsored by Brock Spratlen on Patreon.
9cb250f7be got the ones in RawFilePath,
but there were others that used the one from unix-compat, which fails at
runtime on windows. To avoid this,
import System.PosixCompat.Files hiding removeLink
This commit was sponsored by Ethan Aubin.
Added annex.adjustedbranchrefresh git config to update adjusted branches
set up by git-annex adjust --unlock-present/--hide-missing.
Note, in a few cases, I was not able to make the adjusted branch
be updated in calls to moveAnnex, because information about what
file corresponds to a key is not available. They are:
* If two files point to one file, then eg, `git annex get foo` will
update the branch to unlock foo, but will not unlock bar, because it
does not know about it. Might be fixable by making `git annex get
bar` do something besides skipping bar?
* git-annex-shell recvkey likewise (so sends over ssh from old versions
of git-annex)
* git-annex setkey
* git-annex transferkey if the user does not use --file
* git-annex multicast sends keys with no associated file info
Doing a single full refresh at the end, after any incremental refresh,
will deal with those edge cases.
This will let a module that Annex.Content imports use inAnnex.
Unsure yet if I will need that, but this split still seems to make
sense, and Annex.Content was way too long so splitting it is good.
An --unlock-present branch reverses back to a branch where
all files that get modified or renamed become locked, even if they were
originally unlocked. This is the same that reversing a --unlock branch
works, and the new name makes that commonality more clear.
Like --hide-missing the branch does not get updated when content
availability changes.
Seems to basically work, but sync does not update it yet.
Also, when a file is present and so unlocked, git mv followed by
git-annex sync results in the basis branch being updated to contain the
file with the new name, unlocked. This seems different than what
happens in an adjusted unlocked branch, where the commit propigates back
locked. Probably the reverse adjustment code needs to be improved to
handle this case.
Warn when adding a annex symlink or pointer file that uses a key that is
not known to the repository, to prevent confusion if the user has copied it
from some other repository.
This commit was sponsored by Jake Vosloo on Patreon.
All properties changed to use them, except for
prop_encode_c_decode_c_roundtrip, which already filtered to ascii
for other reasons.
A few modules had to be split out, because Setup does not build-depend
on QuickCheck.
This fixes a bug where a file that was not preferred content could be
transferred to a remote. This happened when the file got deleted after
the sync started running.
The only time checkMatcher is run without a Key is in calls to
checkFileMatcher, which are only done by add, addurl, import, and
smudge --clean. Those won't be affected by this kind of race. Anything
else that might be precaching and have a similar race as sync will also
be fixed, but I don't know if it actually affected anything other than
sync.
As well as fixing a bug, this also probably makes sync and --auto faster
by avoiding the redundant key lookup.
This commit was sponsored by Graham Spencer on Patreon.
instance Arbitrary [Char] allows that, and it's not a legal part of a
filename so can break processing them.
Noticed when prop_view_roundtrips failed.
The instance Arbitrary AssociatedFile avoids this problem.
This commit was sponsored by Mark Reidenbach on Patreon.
Lots of nice wins from this in avoiding unncessary work, and I think
nothing got slower.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Make sure to relay any remaining stderr from the process after it has
shut down, rather than closing stderr just before shutdown. This avoids
a situation where the process is still running and tries to write to
stderr, getting a SIGPIPE. And, it ensures that no stderr output is
lost.
This may fix a problem encountered by datalad on windows, where it hangs
during the external special remote shutdown.
Before commit a49d300545, it closed stdin
and stdout, but left stderr open, and never killed the stderr waiter
thread, which presumably exited on its own. For async exception
safety, do need to at make sure that thread gets waited on, as that
commit does, but it introduced this problem.
Note that, the process's stdout is closed before waiting on it. It's too
late for anything it writes to stdout to be processed, and since we're
not going to consume any such writes, this avoids the process getting
blocked writing to stdout due to us not reading what it's buffered. This
does mean that if the process writes to stdout too late, it will get a
SIGPIPE. (This was already the case before the above-mentioned commit.)
In practice, I think only the protocol's ERROR is allowed to be
sent at a point where this could happen.
removeFile changed to removeLink, because AFAICS it should be fine to
remove non-file things here. In particular, it's fine to remove a
symlink, since we're about to write a symlink. (removeLink does not
remove directories, so file, symlink, and unix socket are the only
possibilities.)
nukeFile replaced with removeWhenExistsWith removeLink, which allows
using RawFilePath. Utility.Directory cannot use RawFilePath since setup
does not depend on posix.
This commit was sponsored by Graham Spencer on Patreon.
Notable wins in Annex.Locations which was sometimes doing 6 conversions
in a single function call.
This commit was sponsored by Denis Dzyubenko on Patreon.
Because it's a special character on Windows ("c:").
Use same technique already used for '/' and '\'.
I didn't record how I generated their encoded forms before, so am sure
there was a better way, but the way I did it now is to look at
ghci> encodeFilePath "∕"
"\226\136\149"
And then the difference from that to "\56546\56456\56469"
is adding 56320 to each, to get up to the escaped code plane.
See comment for why I think handling ':' is ok, but that other illegal
windows filenames won't. Note that, this should be enough to make the
test suite always work. Other windows illegal filenames will fail at
checkout time when it tries to put the illegal filename on the
filesystem.
In cases where numcopies checks prevented the resumed move from dropping
the object from the source repository, it now relies on a log of recent
moves to replicate the behavior of the interrupted command.
Performance: Probably noticable impact, since it has to add to the log,
check the log, and remove from the log. Seems worth it to avoid this
annoying edge case. The log functions are pretty well optimised to avoid
unncessary work.
An performance improvement to make later would be to avoid cleanup doing
anything if it's not written to the log file, and has confirmed that the
log file does not contain the log line.
This commit was sponsored by Jake Vosloo on Patreon.
Those are not installed by git-annex but by the user, and so removal
will never find the default content, and so if the user did install
them, it would display a misleading message.
Seems better, since the user installed them, to let the user remove them
if they want to.
isKnownImportLocation does a database lookup and there's an index
to make that lookup fast, so it's probably faster than talking to git
check-ignore. Checking the matcher is faster still.
While before the gitignore check was added it did not need to always
check isknown, now it does, because it's that or the more expensive
notignored. But at least we can skip notignored when a file is known,
which will often be the common case: Importing from a remote that's been
exported to, and/or imported from before, only new files will not be
known, so only those will need to check notignored.
At first, I had this:
(matches <&&> (isknown <||> notignored)) <||> isknown
Notice that checks isknown every time, whether it matches or not.
So, it's no slower to instead do this:
isknown <||> (matches <&&> notignored)
That has the benefit that, when it's known, it doesn't need to run
matches, which while faster than isknown, is still going to use some CPU.
And it perhaps more clearly expresses the condition: Any known file is
wanted, otherwise it's down to what matches and is not ignored.
This commit was sponsored by Jack Hill on Patren.
It seemed best to do this, for consistency with every other way files can
get into a git-annex repo. Although it's just a bit strange that a local
.gitignore file affects the pseudo-commits made for the remote that's
imported from.
This commit was sponsored by Brett Eisenberg on Patreon.
Which lets progress be displayed when doing concurrent downloads.
Amoung other things, like --json-progress etc.
The youtube-dl output is no longer displayed, except for any errors.
This commit was sponsored by Denis Dzyubenko on Patreon.
sync: When run without --content, import without copying from
importtree=yes directory special remotes. (Other special remotes may
support this later as well.)
This commit was sponsored by Svenne Krap on Patreon.
This avoids import with --no-content and with --content potentially
generating two different trees, leading to a merge conflict when run in
two different clones of a repo. And it's necessary groundwork to make
git-annex sync --no-content import from special remotes that support
importKey.
Only the directory special remote currently supports importKey, and it
generates the same key as git-annex usually does, so there is no
behavior change for it.
Future special remotes will need to take care when adding importKey,
if it generates different keys. Added some warnings about that to
comments.
This commit was sponsored by Noam Kremen on Patreon.
Import small files into git, the same as is done when importing with content.
Which means, for small files, --no-content does download them.
If the largefiles expression needs the file content available
(due to mimetype or mimeencoding being used), the import will fail.
This commit was sponsored by Jake Vosloo on Patreon.
The latter is for git-annex matchexpression and matching against it can
throw an exception. Splitting out the former reduces the potential for
mistakes and avoids needing to worry about matching against that
throwing an exception.
This is more groundwork for matching largefiles while importing,
without downloading content.
This commit was sponsored by Graham Spencer on Patreon.
Anything that needs to examine the file content will fail to match,
or fall back to other available information. But the intent is that the
matcher be checked for matchNeedsFileContent and only be used if it does
not, so the exact behavior doesn't much matter as it should never
happen.
The real point of this is to not need to provide a dummy content file
when matching.
This commit was sponsored by Martin D on Patreon.
Believed to be no longer needed as I've squashed the last ones.
Note that, in Test.Framework, I can see no reason for the code to have
run it twice. It does not cause running processes to exit after all,
so any process that has leaked and is running and causing problems with
cleanup of the directory won't be helped by running it.
This commit was sponsored by Mark Reidenbach on Patreon.
Eliminate a zombie that was only cleaned up by the later zombie cleanup
code.
This is still not ideal, it would be cleaner if it used conduit or
something, and if the thread gets killed before waiting, it won't stop
the process.
Only remaining zombies are in CmdLine.Seek
Sped up seeking for files to operate on, when using options like --copies
or --in, by around 20%.
Benchmark showed an increase for --copies from 155 seconds to 121
seconds, and --in remote will be similar to that.
For --in here, the speedup was less, 5-10% or so.
(both warm cache)
This commit was sponsored by Jack Hill on Patreon.
Sped up seeking to around twice as fast, by avoiding a pass over the
worktree files when preferred content expressions of the local repo and
remotes don't use include=/exclude=.
Thanks to Lukey for identifying the optimisation.
This commit was sponsored by Brock Spratlen on Patreon.
matchNeedsFileContent is not used yet, but shows how to add information
about terminals. That one would be needed for
https://git-annex.branchable.com/todo/sync_fast_import/
Note the tricky bit in Annex.FileMatcher.call where it folds over the
included matcher to propagate the information.
This commit was sponsored by Svenne Krap on Patreon.
add, addurl, importfeed, import: Added --no-check-gitignore option
for finer grained control than using --force.
(--force is used for too many different things, and at least one
of these also uses it for something else. I would like to reduce
--force's footprint until it only forces drops or a few other data
losses. For now, --force still disables checking ignores too.)
addunused: Don't check .gitignores when adding files. This is a behavior
change, but I justify it by analogy with git add of a gitignored file
adding it, asking to add all unused files back should add them all back,
not skip some. The old behavior was surprising.
In Command.Lock and Command.ReKey, CheckGitIgnore False does not change
behavior, it only makes explicit what is done. Since these commands are run
on annexed files, the file is already checked into git, so git add won't
check ignores.
No behavior changes (hopefully), just adding SeekInput and plumbing it
through to the JSON display code for later use.
Over the course of 2 grueling days.
withFilesNotInGit reimplemented in terms of seekHelper
should be the only possible behavior change. It seems to test as
behaving the same.
Note that seekHelper dummies up the SeekInput in the case where
segmentPaths' gives up on sorting the expanded paths because there are
too many input paths. When SeekInput later gets exposed as a json field,
that will result in it being a little bit wrong in the case where
100 or more paths are passed to a git-annex command. I think this is a
subtle enough problem to not matter. If it does turn out to be a
problem, fixing it would require splitting up the input
parameters into groups of < 100, which would make git ls-files run
perhaps more than is necessary. May want to revisit this, because that
fix seems fairly low-impact.
Works better with automatic merge conflict resolution than git's ususual
default of "conflict".
This is not done when automatic merge conflict resolution is disabled.
This commit was sponsored by Mark Reidenbach on Patreon.
Make all calls to git merge go through autoMergeFrom, in preparation
for fine-tuning git merge's config for automatic merge conflict
resolution.
This commit was sponsored by Ryan Newton on Patreon.
This case was handled by cleanConflictCruft, but only when the annexed
file's object was present. When not present, it left the annexed file
with the original name, not checked into git, while adding the variant
file. So, add an explicit deletion of the deleted file in this case.
My specific case where this happened actually involves
merge.directoryRenames=conflict. After a merge involving that,
the situation was the file appears as "added by them", because that
caused the file that they added to be moved into a directory we renamed.
That case is the same as them adding a modified version of the file,
while we deleted it. (Except for the history of the file, since it's a
new file, but this doesn't look at history.)
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
This does not actually change how the merge conflict is resolved when
one side deleted the file, but it was not documented before, and I think
it only worked by accident.
This commit was sponsored by Brett Eisenberg on Patreon.
One reason is, 5 is an arbitrary number so ought to be configurable.
The real reason though, is I wanted to make the man page explain when
forward retry can override annex.retry, and having a config made the
man page easier to write.
This fixes the problem that, if forwardRetry was checked for the first 5
and decided to retry, the 6th would go to configuredRetry which would
see the counter was 6 and so wait retry-delay*2^5 seconds (default 32).
Now, it waits for retry-delay before each retry, even when forwardRetry
initiated the retry.
Also audited for other calls to openTempFile, and all are ok,
except for viaTmp which will need further work.
Remote.Directory fixed to set umask mode when writing to an export,
although it has another one using viaTmp that's not fixed.
Will make exports that are published via a http server running as
another user work, for example.
Remote.BitTorrent fixed to set umask mode when downloading the torrent
file. Normally this does not matter as that file does not hang around
after the download, but if a bittorrent download were started by one user,
got interrupted and then another user ran it, this will let them access
the torrent file created by the first user.
Fixes reversion in 8.20200617 that made annex.pidlock being enabled result
in some commands stalling, particularly those needing to autoinit.
Renamed runsGitAnnexChildProcess to make clearer where it should be
used.
Arguably, it would be better to have a way to make any process git-annex
runs have the env var set. But then it would need to take the pid lock
when running any and all processes, and that would be a problem when
git-annex runs two processes concurrently. So, I'm left doing it ad-hoc
in places where git-annex really does run a child process, directly
or indirectly via a particular git command.
sanitizeFilePath was changed to sanitize leading '.', but ImportFeed was
running it on parts of the template. So eg the leading '.' in the extension
got sanitized.
Note the added case for sanitizeLeadingFilePathCharacter ('/':_)
-- this was added because, if the template is title/episode and the title
is not set, it would expand to "/episode". So this is another potential
security fix.
This was already prevented in other ways, but as seen in commit
c30fd24d91, those were a bit fragile.
And I'm not sure races were avoided in every case before. At least a
race between two separate git-annex processes, dropping the same
content, seemed possible.
This way, if locking fails, and the content is not present, it will
always do the right thing. Also, it avoids the overhead of an unncessary
inAnnex check for every file.
This commit was sponsored by Denis Dzyubenko on Patreon.
The test suite noticed this case, where two files with the same key are
dropped, and the seek stage sees both have content due to the way files
stream through it. But then locking the content to drop fails on the
second file, because the first file has already been dropped.
So, add back otherwise redundant inAnnex check.
Sped up seeking files to drop by 2x, and also some performance
improvements to checking numcopies.
Interestingly, the seek speedup is not due to precaching, but I think is
due to calling getParsed earlier.
Annex.Drop had to be changed to check inAnnex there, since it was removed
from Command.Drop. All other users of Command.Drop already checked inAnnex
themselves.
This commit was sponsored by Ryan Newton on Patreon.
This is groundwork for external backends, but also makes sense to keep
this information with the rest of a Backend's implementation.
Also, removed isVerifiable. I noticed that the same information is
encoded by whether a Backend implements verifyKeyContent or not.
planned to use for an optimisation
most things using stagedDetails were not expecting to get dup files in a
conflicted merge and deal with them, so converted them to use
inRepoDetails.
And convert parser to attoparsec, probably faster.
Before, a parse failure threw the whole --stage output line in to the
filename, which was certianly a bad idea, so fixed that.
My worry was that a preferred content expression that matches on metadata
would have removed the location log from cache, causing an expensive
re-read when a Seek action later checked the location log.
Especially when the --all optimisation in the previous commit
pre-cached the location log.
This also means that the --all optimisation could cache the metadata log
too, if it wanted too, but not currently done.
The cache is a list, with the most recently accessed file first. That
optimises it for the common case of reading the same file twice, eg a
get, examine, followed by set reads it twice. And sync --content reads the
location log 3 times in a row commonly.
But, as a list, it should not be made to be too long. I thought about
expanding it to 5 items, but that seemed unlikely to be a win commonly
enough to outweigh the extra time spent checking the cache.
Clearly there could be some further benchmarking and tuning here.
The cache was removed way back in 2012,
commit 3417c55189
Then I forgot I had removed it! I remember clearly multiple times when I
thought, "this reads the same data twice, but the cache will avoid that
being very expensive".
The reason it was removed was it messed up the assistant noticing when
other processes made changes. That same kind of problem has recently
been addressed when adding the optimisation to avoid reading the journal
unnecessarily.
Indeed, enableInteractiveJournalAccess is run in just the
right places, so can just piggyback on it to know when it's not safe
to use the cache.
Only supported by some special remotes: directory
I need to check the rest and they're currently missing methods until I do.
git-annex sync --no-content does not yet use this to do imports
This adds a dep on hashable, but it's a free dependency, since
unordered-containers already pulled it in.
Using unordered-containers for the set seems to make sense, since it
hashes and bloom filter hashes too. (Though different hashes.)
I dunno, never quite know if I should use unordered-containers or containers.
This is a fairly hard to understand situation for the user. Listing the
remotes should help them understand it a bit better.
This commit was sponsored by Ethan Aubin.
git is making that configurable, and configuring it globally would break
the test suite in a few places.
No other part of git-annex assumes any branch name. Renamed a few
placeholders to make that clearer.
This commit was sponsored by Jake Vosloo on Patreon.
Otherwise use the vendored copy as before.
The library is in Debian testing but not stable. Once it reaches
stable, the vendored copy can be removed.
Did not add it to debian/control because IIRC that's used to build
git-annex on stable too, possibly. However, the Debian maintainer will
probably want to make the package depend on libghc-http-client-restricted-dev
This commit was sponsored by Ilya Shlyakhter on Patreon.
Clean build under ghc 8.8.3, which seems to do better at finding cases
where two imports both provide the same symbol, and warns about one of
them.
This commit was sponsored by Ilya Shlyakhter on Patreon.
Fix a deadlock that could occur after git-annex got an unlocked file,
causing the command to hang indefinitely.
Known to happen on vfat filesystems, possibly others.
Note that a deadlock is still theoretically possible, if anything
smudge --clean does causes it to run the git queue for some other
reason.
Apparently that doesn't happen, but will need to keep an eye on it.
