* config: Added the --show-origin and --for-file options.
* config: Support annex.numcopies and annex.mincopies.
There is a little bit of redundancy here with other code elsewhere that
combines the various configs and selects which to use. But really only
for the special case of annex.numcopies, which is a git config that does
not override the annex branch setting and for annex.mincopies, which does
not have a git config but does have gitattributes settings as well as the
annex branch setting.
That seems small enough, and unlikely enough to grow into a mess that it was
worth supporting annex.numcopies and annex.mincopies in git-annex config
--show-origin. Because these settings are a prime thing that someone might
get confused about and want to know where they were configured.
And, it followed that git-annex config might as well support those two
for --set and --get as well. While this is redundant with the speclialized
commands, it's only a little code and it makes it more consistent.
Note that --set does not have as nice output as numcopies/mincopies
commands in some special cases like setting to 0 or a negative number.
It does avoid setting to a bad value thanks to the smart
constructors (eg configuredNumCopies).
As for other git-annex branch configurations that are not set by git-annex
config, things like trust and wanted that are specific to a repository
don't map to a git config name, so don't really fit into git-annex config.
And they are only configured in the git-annex branch with no local override
(at least so far), so --show-origin would not be useful for them.
Sponsored-by: Dartmouth College's DANDI project
It just so happens that everywhere that checks attrs other than
annex.largefiles parses the value further, and failed to parse
unspecifiedAttr in a way that behaved the same as if nothing was set. So
this is not a bug fix or behavior change. What it does so is prevent
future uses of checkAttr from needing to remember to handle checking for
this edge case.
Sponsored-by: Dartmouth College's DANDI project
This avoids bottlenecking on git check-ignore in a particular situation.
Also, there may have been a correctness issue with it not having updated it.
When the exportdb is already up-to-date, this is not expensive. And the
exportdb is updated elsewhere, so usually it is up-to-date.
Sponsored-by: Joshua Antonishen on Patreon
Speeds up sync in an adjusted branch by avoiding re-adjusting the branch
unncessarily, particularly when it is adjusted with --hide-missing or
--unlock-present.
When there are a lot of files, that was the majority of the time of a
--no-content sync.
Uses a log file, which is updated when content presence changes. This
adds a little bit of overhead to every file get/drop when on such an
adjusted branch. The overhead is minimal for get of any size of file,
but might be noticable for drop in some cases. It seems like a reasonable
trade-off. It would be possible to update the log file only at the end, but
then it would not happen if the command is interrupted.
When not in an adjusted branch, there should be no additional overhead.
(getCurrentBranch is an MVar read, and it avoids the MVar read of
getGitConfig.)
Note that this does not deal with situations such as:
git checkout master, git-annex get, git checkout adjusted branch,
git-annex sync. The sync won't know that the adjusted branch needs to be
updated. Dealing with that would add overhead to operation in non-adjusted
branches, which I don't like. Also, there are other situations like having
two adjusted branches that both need to be updated like this, and switching
between them and sync not updating.
This does mean a behavior change to sync, since it did previously deal
with those situations. But, the documentation did not say that it did.
The man pages only talk about sync updating the adjusted branch after
it transfers content.
I did consider making sync keep track of content it transferred (and
dropped) and only update the adjusted branch then, not to catch up to other
changes made previously. That would perform better. But it seemed rather
hard to implement, and also it would have problems with races with a
concurrent get/drop, which this implementation avoids.
And it seemed pretty likely someone had gotten used to get/drop followed by
sync updating the branch. It seems much less likely someone is switching
branches, doing get/drop, and then switching back and expecting sync to update
the branch.
Re-running git-annex adjust still does a full re-adjusting of the branch,
for anyone who needs that.
Sponsored-by: Leon Schuermann on Patreon
Introduced recently in commit 64fc34b3da.
adjustBranch changes the sha that is recorded for the current branch
(eg the adjusted branch). So, have to get the original sha before
calling it.
Sponsored-by: Jack Hill on Patreon
Updating an adjusted branch can take a while when there are a lot of
files. HEAD was detached at the start, so if eg git-annex sync was
interrupted at the wrong point, there was a possibly wide window where
it would leave the repo with HEAD detached.
There's still a window, just much narrower. I don't know if it's
possible to close the window entirely. While git can clearly update
the currently checked out branch in eg git merge, it doesn't seem to
provide another way to do it.
Sponsored-by: Graham Spencer on Patreon
Reading from the cidsdb is responsible for about 25% of the runtime of
an import. Since the cidmap is used to store the same information in
ram, the cidsdb is not written to during an import any longer. And so,
if it started off empty (and updateFromLog wasn't needed), those reads
can just be skipped.
This is kind of a cheesy optimisation, since after any import from any
special remote, the database will no longer be empty, so it's a single
use optimisation. But it's probably not uncommon to start by importing a
lot of files, and it can save a lot of time then.
Sponsored-by: Brock Spratlen on Patreon
Large speed up to importing trees from special remotes that contain a lot
of files, by only processing changed files.
Benchmarks:
Importing from a special remote that has 10000 files, that have all been
imported before, and 1 new file sped up from 26.06 to 2.59 seconds.
An import with no change and 10000 unchanged files sped up from 24.3 to
1.99 seconds.
Going up to 20000 files, an import with no changes sped up from
125.95 to 3.84 seconds.
Sponsored-by: k0ld on Patreon
For simplicity, I've not tried to make it handle History yet, so when
there is a history, a full import will still be done. Probably the right
way to handle history is to first diff from the current tree to the last
imported tree. Then, diff from the current tree to each of the
historical trees, and recurse through the history diffing from child tree
to parent tree.
I don't think that will need a record of the previously imported
historical trees, and so Logs.Import doesn't store them. Although I did
leave room for future expansion in that log just in case.
Next step will be to change importTree to importChanges and modify
recordImportTree et all to handle it, by using adjustTree.
Sponsored-by: Brett Eisenberg on Patreon
This gets the trees built, but it does not use them. Next step will be
to remember the tree for next time an import is done, and diff between
old and new trees to find the files that have changed.
Added --missing to the mktree parameters. That only disables a check, so
it's ok to do everywhere mktree is used. It probably also speeds up
mktree to disable the check.
Note that git fsck does not complain about the resulting tree objects
that point to shas that are not in the repository. Even with --strict.
A quick benchmark, importing 10000 files, this slowed it down
from 2:04.06 to 2:04.28. So it will more than pay for itself.
Sponsored-by: Luke Shumaker on Patreon
Speed up importing trees from special remotes somewhat by avoiding
redundant writes to sqlite database.
Before, import would write to both the git-annex branch and also to the
sqlite database. But then the next time it was run, needsUpdateFromLog
would see the branch had changed, so run updateFromLog, which would make
the same writes to the sqlite database a second time.
Now import writes only to the git-annex branch. The next time it's run,
needsUpdateFromLog sees that the branch has changed and so calls
updateFromLog, which updates the sqlite database.
Why defer the write to the sqlite database like this? It seems that it
could write to the database as it goes, and at the end call
recordAnnexBranchTree to indicate that the information in the git-annex
branch has all been written to the cidsdb. That would avoid the second
import doing extra work.
But, there could be other processes running at the same time, and one of
them may update the git-annex branch, eg merging a remote git-annex branch
into it. Any cids logs on that merged git-annex branch would not be
reflected in the cidsdb yet. If the import then called
recordAnnexBranchTree, the cidsdb would never get updated with that merged
information.
I don't think there's a good way to prevent, or to detect that situation.
So, it can't call recordAnnexBranchTree at the end. So it might as well
wait until the next run and do updateFromLog then. It could instead do
updateFromLog at the end, but it's going to check needsUpdateFromLog
at the beginning anyway.
Note that the database writes were queued, so there is already a cidmap
that is used to remember changes that the current process has made.
So, omitting database writes can't change the behavior of the current
process.
Also note that thirdpartypopulatedimport uses recordcidkeyindb, which
reflects what it already did. That code path does not use the cidmap,
but does not need to query it either. It might be possible to make that
code path also only update the git-annex branch and not the db, but I
haven't checked.
Sponsored-by: Noam Kremen on Patreon
I noticed git-annex was using a lot of CPU when downloading from youtube,
and was not displaying progress. Turns out that yt-dlp (and I think also
youtube-dl) sometimes only knows an estimated size, not the actual size,
and displays the progress output slightly differently for that. That broke
the parser. And, the parser was feeding chunks that failed to parse back
as a remainder, which caused it to try to re-parse the entire output each
time, so it got slower and slower.
Using --progress-template like this should avoid parsing problems as well
as future proof against output changes. But it will work with only yt-dlp.
So, this seemed like the right time to deprecate youtube-dl, and default
to yt-dlp when available.
git-annex will still use youtube-dl if that's all that's available.
However, since the progress parser for youtube-dl was buggy, and I don't
want to maintain two different progress parsers (especially since
youtube-dl is no longer in debian unstable having been replaced by
yt-dlp), made git-annex no longer try to parse youtube-dl's progress.
Also, updated docs for yt-dlp being default. It did not seem worth
renaming annex.youtube-dl-options and annex.youtube-dl-command.
Note that yt-dlp does not seem to document the fields available in the
progress template. I found them by reading the source and looking at
the templates it uses internally. Also note that the use of "i" (rather
than "s") in progressTemplate makes it display floats rounded to integers;
particularly the estimated total size can be a float. That also does not
seem to be documented but I assume is a python thing?
Sponsored-by: Joshua Antonishen on Patreon
This makes annexFileMode be just an application of setAnnexPerm',
which avoids having 2 functions that do different versions of the same
thing.
Fixes some buggy behavior for some combinations of core.sharedRepository
and umask.
Sponsored-by: Jack Hill on Patreon
These two missed setting it.
It rarely matters that the journal gets the right perm. But, when using
annex.alwayscommit=false, someone else may come along later and want
to append to the journal file.
It probably never matters what the sentinal perms are, but for
completeness..
Sponsored-by: Luke Shumaker on Patreon
This spams the user with a lot of messages, but it seems like busywork to
avoid that and only warn once, since this warning will go away when it gets
implemented.
Also fix parsing of the octal value.
Sponsored-by: Kevin Mueller on Patreon
New command, currently limited to changing autoenable= setting of a special remote.
It will probably never be used for more than that given the limitations on
it.
Sponsored-by: Brock Spratlen on Patreon
When displaying a ByteString like "💕", safeOutput operates on
individual bytes like "\240\159\146\149" and isControl '\146' = True,
so it got truncated to just "\240".
So, only treat the low control characters, and DEL, as control
characters.
Also split Utility.Terminal out of Utility.SafeOutput. The latter needs
win32, but Utility.SafeOutput is used by Control.Exception, which is
used by Setup.
Sponsored-by: Nicholas Golder-Manning on Patreon
I'm on the fence about this. Notice that pulling from a git remote can
pull branches that have escape sequences in their names. Git will
display those as-is. Arguably git should try harder to avoid that.
But, names of remotes are usually up to the local user, and autoenable
changes that, and so it makes sense that git chooses to display control
characters in names of remotes, and so autoenable needs to guard against
it.
Sponsored-by: Graham Spencer on Patreon
Seems unlikely to have a tab in a path, but it's not a control character
that needs to be prevented either.
Left \n \r \v and \a as other non-threatening control characters
that are still obnoxious to have in a filepath because of how it causes
issues with display and/or with shell scripting.
This does, as a side effect, make long notes in json output not
be indented. The indentation is only needed to offset them
underneath the display of the file they apply to, so that's ok.
Sponsored-by: Brock Spratlen on Patreon
Converted warning and similar to use StringContainingQuotedPath. Most
warnings are static strings, some do refer to filepaths that need to be
quoted, and others don't need quoting.
Note that, since quote filters out control characters of even
UnquotedString, this makes all warnings safe, even when an attacker
sneaks in a control character in some other way.
When json is being output, no quoting is done, since json gets its own
quoting.
This does, as a side effect, make warning messages in json output not
be indented. The indentation is only needed to offset warning messages
underneath the display of the file they apply to, so that's ok.
Sponsored-by: Brett Eisenberg on Patreon
giveup changed to filter out control characters. (It is too low level to
make it use StringContainingQuotedPath.)
error still does not, but it should only be used for internal errors,
where the message is not attacker-controlled.
Changed a lot of existing error to giveup when it is not strictly an
internal error.
Of course, other exceptions can still be thrown, either by code in
git-annex, or a library, that include some attacker-controlled value.
This does not guard against those.
Sponsored-by: Noam Kremen on Patreon
When the filenames are part of the git repository or other files that
might have attacker-controlled names, quote them in error messages.
This is fairly complete, although I didn't do the one in
Utility.DirWatcher.INotify.hs because that doesn't have access to
Git.Filename or Annex.
But it's also quite possible I missed some. And also while scanning for
these, I found giveup used with other things that could be attacker
controlled to contain control characters (eg Keys). So, I'm thinking
it would also be good for giveup to just filter out control characters.
This commit is then not the only line of defence, but just good
formatting when git-annex displays a filename in an error message.
Sponsored-by: Kevin Mueller on Patreon
As well as escape sequences, control characters seem unlikely to be desired when
doing addurl, and likely to trip someone up. So disallow them as well.
I did consider going the other way and allowing filenames with control characters
and escape sequences, since git-annex is in the process of escaping display
of all filenames. Might still be a better idea?
Also display the illegal filename git quoted when it rejects it.
Sponsored-by: Nicholas Golder-Manning on Patreon
Added StringContainingQuotedPath, which is used for ActionItemOther.
In the process, checked every ActionItemOther for those containing
filenames, and made them use quoting.
Sponsored-by: Graham Spencer on Patreon
This reverts commit 66eb63dd82.
git-annex init is the only thing that uses ensureCommit. So overriding
there will make later commits to the git-annex branch or by git-annex sync
fail.
It's ugly that git-annex init sets user.name and user.email, but it only
does it on systems that are badly configured.
When it's set and git cannot determine user.name or user.email, this will
result in git-annex init failing when committing to create the git-annex
branch. Other git-annex commands that commit can also fail.
Sponsored-by: Jack Hill on Patreon
Avoid setting user.name and user.email in the git config when git is unable
to detect them.
git-annex has good reason to want to ensure git commit succeeds when eg
committing to the git-annex branch. But it's not playing nice to set these
values where other commands can see them.
Sponsored-by: Brett Eisenberg on Patreon
Fix laziness bug introduced in last release that breaks use of
--unlock-present and --hide-missing adjusted branches.
Since there is a writeFile of the same file immediately after readFile, it
may still have the file open for read (or may have happened to read it
already and closed it).
I was not able to reproduce the problem in brief testing, but this seems
obvious.
Sponsored-by: Luke Shumaker on Patreona
Remote.Directory makes a temp file, then calls this, and since the temp
file exists, it prevented probing if CoW works.
Note that deleting the empty file does mean there's a small window for a
race. If another process is also exporting to the remote, that could let it
make the same temp file. However, the temp filename actually has the
processes's pid in it, which avoids that being a problem.
This may have been a reversion caused by commits around
63d508e885, but I haven't gone back and
tested to be sure. The directory special remote had supposedly supported
CoW for this going back to about half a year before that.
Sponsored-by: Graham Spencer on Patreon
The temporary URL key used for the download, before the real key is
generated, was blocked by annex.securehashesonly.
Fixed by passing the Backend that will be used for the final key into
runTransfer. When a Backend is provided, have preCheckSecureHashes
check that, rather than the key being transferred.
Sponsored-by: unqueued on Patreon
view: Support annex.maxextensionlength when generating filenames for the
view branch.
Note that refining an existing view will reuse the extension length that was
configured when initially constructing the view. This is necessarily the case
because it reuses the filenames.
Also view files used to have all extensions at the end, no matter how
many there were. Since annex.maxextensionlength's documentation includes
that it's limited to 2 extensions, I made it consistent with that.
Sponsored-by: k0ld on Patreon
I don't know of scenarios where that can happen (besides the bug
fixed by the parent commit), but there probably are some.
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
Avoid failure to update adjusted branch --unlock-present after git-annex
drop when annex.adjustedbranchrefresh=1
At higher values, it did flush the queue, which ran restagePointerFiles.
But at 1, adjustedBranchRefreshFull gets added to the queue, and while
restagePointerFiles is also in the queue, it runs after that.
Sponsored-by: Brock Spratlen on Patreon
Works around this bug in unix-compat:
https://github.com/jacobstanley/unix-compat/issues/56
getFileStatus and other FilePath using functions in unix-compat do not do
UNC conversion on Windows.
Made Utility.RawFilePath use convertToWindowsNativeNamespace to do the
necessary conversion on windows to support long filenames.
Audited all imports of System.PosixCompat.Files to make sure that no
functions that operate on FilePath were imported from it. Instead, use
the equvilants from Utility.RawFilePath. In particular the
re-export of that module in Common had to be removed, which led to lots
of other changes throughout the code.
The changes to Build.Configure, Build.DesktopFile, and Build.TestConfig
make Utility.Directory not be needed to build setup. And so let it use
Utility.RawFilePath, which depends on unix, which cannot be in
setup-depends.
Sponsored-by: Dartmouth College's Datalad project
I had thought this would not make sense to combine with view branches,
since removing files from a view changes metadata.
However, that's committing removal of files. With --hide-missing, the
files get removed when git-annex updates the branch itself, so there is
no conflict.
It does not seem likely to be very useful, but it does work! And that's
nice because it means all types of adjusted branches can be combined with
view branches.
Sponsored-by: Max Thoursie on Patreon
When generating the view, check if the key is present.
When syncing in a view branch with an adjustment, run adjustedBranchRefreshFull
the same as is done when syncing in other adjusted branches. This is
needed because the docs for git-annex adjust --unlock-present suggest
using git-annex sync to update the branch when annex.adjustedbranchrefresh
is not set.
Note that, with annex.adjustedbranchrefresh set, it just works! The
adjusted branch gets updated in the usual way and it doesn't matter that
there's a view branch underneath.
And of course, re-running git-annex adjut --unlock-present also works,
as suggested in the docs.
Sponsored-by: Erik Bjäreholt on Patreon
Just make pointer files rather than symlinks, easy.
As for the other adjustments:
--lock is the default for views
--fix happens automatically in views
--hide-missing probably does not make sense when combined with views,
because deleting a file from a view removes metadata
--unlock-present will need a bit more work
An adjusted view branch has a name like
"refs/heads/adjusted/views/master(author=_)(unlocked)", so it is a view
branch that has been converted to an adjusted branch.
Made Logs.View support such branch names. So now git-annex sync and
pre-commit handle updating metadata on commit in such a branch.
Much remains to be done to fully support adjusted view branches,
including actually applying the adjustment when updating the view branch.
Sponsored-by: Graham Spencer on Patreon
