New error message:
Remote foo not usable by git-annex; setting annex-ignore
http://localhost/foo/config download failed: Configuration of annex.security.allowed-ip-addresses does not allow accessing address ::1
If git config parse fails, or the git config file is not available at the url,
a better error message for that is also shown.
This commit was sponsored by Mark Reidenbach on Patreon.
Seems that hasOrigin was never finding origin's git-annex branch, so a new
one got created each time. And so then it later needed to merge the two
branches, which is expensive.
Added --no-track to git branch to avoid it displaying a message about
setting up tracking branches. Of course there's no reason to make the
git-annex branch a tracking branch since git-annex auto-merges it.
Can beet to false to avoid some expensive things needed to support unlocked
files.
See my comment for why this only controls what init sets up, and not other
behavior.
I didn't bother with making the v5 upgrade code path look at this, though
it easily could, because the docs say to run git-annex init after setting
it to make it take effect.
Not yet used, but allows getting the size of items in the tree fairly
cheaply.
I noticed that CmdLine.Seek uses ls-tree and the feeds the files into
another long-running process to check their size. That would be an
example of a place that might be sped up by using this. Although in that
particular case, it only needs to know the size of unlocked files, not
locked. And since enabling --long probably doubles the ls-tree runtime
or more, the overhead of using it there may outwweigh the benefit.
When autoenabling special remotes of type S3, weddav, or glacier, do not
take login credentials from environment variables, as the user may not be
expecting the autoenable to happen, and may have those set for other
purposes.
This solves the problem that import of such files gets confused and
converts them back to annexed files.
The import code already used GIT keys internally when it determined a
file should not be annexed. So now when it sees a GIT key that export
used, it already does the right thing.
This also means that even older version of git-annex can import and will
do the right thing, once a fixed version has exported. Still, there may
be other complications around upgrades; still need to think it all
through.
Moved gitShaKey and keyGitSha from Key to Annex.Export since they're
only used for export/import.
Documented GIT keys in backends, since they do appear in the git-annex
branch now.
This commit was sponsored by Graham Spencer on Patreon.
Added LinkType to ProvidedInfo, and unified MatchingKey with
ProvidedInfo. They're both used in the same way, so there was no real
reason to keep separate.
Note that addLocked and addUnlocked still set matchNeedsFileName,
because to handle MatchingFile, they do need it. However, they
don't use it when MatchingInfo is provided. This should be ok,
the --branch case will be able skip checking matchNeedsFileName,
since it will provide a filename in any case.
Checksum as content is received from a remote git-annex repository, rather
than doing it in a second pass.
Not tested at all yet, but I imagine it will work!
Not implemented for any special remotes, and also not implemented for
copies from local remotes. It may be that, for local remotes, it will
suffice to use rsync, rely on its checksumming, and simply return Verified.
(It would still make a checksumming pass when cp is used for COW, I guess.)
When annex.stalldetection is not enabled, and a likely stall is detected,
display a suggestion to enable it.
Note that the progress meter display is not taken down when displaying
the message, so it will display like this:
0% 8 B 0 B/s
Transfer seems to have stalled. To handle stalling transfers, configure annex.stalldetection
0% 10 B 0 B/s
Although of course if it's really stalled, it will never update
again after the message. Taking down the progress meter and starting
a new one doesn't seem too necessary given how unusual this is,
also this does help show the state it was at when it stalled.
Use of uninterruptibleCancel here is ok, the thread it's canceling
only does STM transactions and sleeps. The annex thread that gets
forked off is separate to avoid it being canceled, so that it
can be joined back at the end.
A module cycle required moving from dupState the precaching of the
remote list. Doing it at startConcurrency should cover all the cases
where the remote list is used in concurrent actions.
This commit was sponsored by Kevin Mueller on Patreon.
annex.stalldetection can now be set to "true" to make git-annex do
automatic stall detection when it detects a remote is updating its transfer
progress consistently enough.
This commit was sponsored by Luke Shumaker on Patreon.
Missed this when implementing it because of the default case catching
the new constructor. So, removed that default case to make sure
future types of adjusted branches don't make the same mistake.
Complicated by git-annex addurl --fast which adds the file whose content
is not present, so it needs to stay unlocked when on such a branch.
This commit was sponsored by Brock Spratlen on Patreon.
This avoids the smudge --clean filter failing on the URL keys.
git checkout runs the post-checkout hook, which runs smudge --update.
That populates all the pointer files, but it neglected to store their inode
caches in the keys db. With that done, and the keys db flushed before
smudge --clean gets run (by restagePointerFile), the isUnmodifiedCheap
check can tell the file is not modified, so will not try to re-ingest it,
which does not work with URL keys because they do not support genKey.
It also seems possible that the isUnmodifiedCheap was also failing for
non-URL keys, which would cause them to be re-ingested, leading to a lot of
extra work. I have not verified that, but don't see why it wouldn't have
happened. So this probably also speeds up checking out adjusted branches.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
This is probably a reversion, but not sure what caused it. By the time
Annex.Init runs fixupUnusualReposAfterInit, another git-annex process has
at least sometimes already done the necessary fixups. (Eg, one run
indirectly by a git command.) But since the Repo is cached, it doesn't
realize and does them again. So, avoid crashing when git config --unset
fails.
This commit was sponsored by Jack Hill on Patreon.
This is conceptually very simple, just making a 1 that was hard coded be
exposed as a config option. The hard part was plumbing all that, and
dealing with complexities like reading it from git attributes at the
same time that numcopies is read.
Behavior change: When numcopies is set to 0, git-annex used to drop
content without requiring any copies. Now to get that (highly unsafe)
behavior, mincopies also needs to be set to 0. It seemed better to
remove that edge case, than complicate mincopies by ignoring it when
numcopies is 0.
This commit was sponsored by Denis Dzyubenko on Patreon.
* add: Significantly speed up adding lots of non-large files to git,
by disabling the annex smudge filter when running git add.
* add --force-small: Run git add rather than updating the index itself,
so any other smudge filters than the annex one that may be enabled will
be used.
Especially from borg, where the content identifier logs
all end up being the same identical file!
But also, for other imports, the location tracking logs can,
in some cases, be identical files.
Bonus optimisation: Avoid looking up (and parsing when set)
GIT_ANNEX_VECTOR_CLOCK env var every time a log is written to.
Although the lookup does happen at startup even when no
log will be written now.
May actually work now.
Note that, importKey now has to add the size to the key if it's supposed
to have size. Remote.Directory relied on the importer adding the size,
which is no longer done, so it was changed; it was the only one.
This way, importKey does not need to behave differently between regular
and thirdpartypopulated imports.
These don't have importTree in their config, because they don't support
tree import, but they do still support import, and do not support export
or key/value modification.
This is to support, eg a borg repo as a special remote, which is
populated not by running git-annex commands, but by using borg. Then
git-annex sync lists the content of the remote, learns which files are
annex objects, and treats those as present in the remote.
So, most of the import machinery is reused, to a new purpose. While
normally importtree maintains a remote tracking branch, this does not,
because the files stored in the remote are annex object files, not
user-visible filenames. But, internally, a git tree is still generated,
of the files on the remote that are annex objects. This tree is used
by retrieveExportWithContentIdentifier, etc. As with other import/export
remotes, that the tree is recorded in the export log, and gets grafted
into the git-annex branch.
importKey changed to be able to return Nothing, to indicate when an
ImportLocation is not an annex object and so should be skipped from
being included in the tree.
It did not seem to make sense to have git-annex import do this, since
from the user's perspective, it's not like other imports. So only
git-annex sync does it.
Note that, git-annex sync does not yet download objects from such
remotes that are preferred content. importKeys is run with
content downloading disabled, to avoid getting the content of all
objects. Perhaps what's needed is for seekSyncContent to be run with these
remotes, but I don't know if it will just work (in particular, it needs
to avoid trying to transfer objects to them), so I skipped that for now.
(Untested and unused as of yet.)
This commit was sponsored by Jochen Bartl on Patreon.
Don't want to try to use these remotes as key/value remotes, which will
surely fail. It only recently became possible for importtree to be set
w/o exporttree, so before this code was ok.
(cherry picked from commit 97599cb0f7f4115aa5a3e81a91ee3d1d6c52dc84)
And vice-versa, but it's better to use '/' for portability.
Notably, standardPreferredContent contains "archive/*" and that might not
match if the filename ends up coming in with the slashes the other way
around.
git -c was already propagated via environment, but need this for
consistency.
Also, notice it does not use gitAnnexChildProcess to run the
transferrer. So nothing is done about avoid it taking the
pid lock. It's possible that the caller is already doing something that
took the pid lock, and if so, the transferrer will certianly fail,
since it needs to take the pid lock too. This may prevent combining
annex.stalldetection with annex.pidlock, but I have not verified it's
really a problem. If it was, it seems git-annex would have to take
the pid lock when starting a transferrer, and hold it until shutdown,
or would need to take pid lock when starting to use a transferrer,
and hold it until done with a transfer and then drop it. The latter
would require starting the transferrer with pid locking disabled for the
child process, so assumes that the transferrer does not do anyting that
needs locking when not running a transfer.
MatchingKey is not the thing to use when matching on actual worktreee
files.
Fix reversion in 8.20201116 that made include= and exclude= in
preferred/required content expressions match a path relative to the current
directory, rather than the path from the top of the repository.
* Guard against running in a repo where annex.uuid is set but
annex.version is set, or vice-versa.
* Avoid autoinit when a repo does not have annex.version or annex.uuid
set, but has a git-annex objects directory, suggesting it was used
by git-annex before.
When fully stalled, the progress bar doesn't update, so waiting on a
MVar would block forever. There's no need to wait anyway, just wake up
after sleeping the configured period and check the current value.
Luckily Viasat makes it really easy for me to notice this kind of
mistake, by stalling long TCP connections frequently.
