filter-process: New command that can make git add/checkout faster when
there are a lot of unlocked annexed files or non-annexed files, but that
also makes git add of large annexed files slower.
Use it by running: git
config filter.annex.process 'git-annex filter-process'
Fully tested and working, but I have not benchmarked it at all.
And, incremental hashing is not done when git add uses it, so extra work is
done in that case.
Sponsored-by: Mark Reidenbach on Patreon
This module is not used yet, but the plan is to use it for smudge/clean
filtering, at least as an option. In some circumstances, using this
interface may perform better than the interface git-annex is currently
using.
Sponsored-by: Brock Spratlen on Patreon
git does not crash when there's a remote configured for a user who does
not exist, and this prevents git-annex from crashing too. Consider that
a user might exist on one system but not another, and the git repo be
moved between systems. So not crashing is desirable.
Note that git fetch seems to mishandle a remote path like ~foo/bar
when the user does not exist. While it does access ./~foo/bar,
and gets as far as running git-upload-pack on the path,
it then complains there is no such repo. So different parts of git seem
to be doing different things in that edge case. Anyway, git-annex does
not need to be bug-for-bug compatible with git.
Sponsored-by: Jack Hill on Patreon
This improves the borg special remote memory usage, by
letting it only load one archive's worth of filenames into memory at a
time, and building up a larger tree out of the chunks.
When a borg repository has many archives, git-annex could easily OOM
before. Now, it will use only memory proportional to the number of
annexed keys in an archive.
Minor implementation wart: Each new chunk re-opens the content
identifier database, and also a new vector clock is used for each chunk.
This is a minor innefficiency only; the use of continuations makes
it hard to avoid, although putting the database handle into a Reader
monad would be one way to fix it.
It may later be possible to extend the ImportableContentsChunkable
interface to remotes that are not third-party populated. However, that
would perhaps need an interface that does not use continuations.
The ImportableContentsChunkable interface currently does not allow
populating the top of the tree with anything other than subtrees. It
would be easy to extend it to allow putting files in that tree, but borg
doesn't need that so I left it out for now.
Sponsored-by: Noam Kremen on Patreon
Commit 4bf7940d6b introduced this
problem, but was otherwise doing a good thing. Problem being
that fileRef "/foo" used to return ":./foo", which was actually wrong,
but as long as there was no foo in the local repository, catKey
could operate on it without crashing. After that fix though, fileRef
would return eg "../../foo", resulting in fileRef returning
":./../../foo", which will make git cat-file crash since that's
not a valid path in the repo.
Fix is simply to make fileRef detect paths outside the repo and return
Nothing. Then catKey can be skipped. This needed several bugfixes to
dirContains as well, in previous commits.
In Command.Smudge, this led to needing to check for Nothing. That case
should actually never happen, because the fileoutsiderepo check will
detect it earlier.
Sponsored-by: Brock Spratlen on Patreon
This avoids starting one process when only the other one is needed.
Eg in git-annex smudge --clean, this reduces the total number of
cat-file processes that are started from 4 to 2.
The only performance penalty is that when both are needed, it has to do
twice as much work to maintain the two Maps. But both are very small,
consisting of 1 or 2 items, so that work is negligible.
Sponsored-by: Dartmouth College's Datalad project
This eliminates the distinction between decodeBS and decodeBS', encodeBS
and encodeBS', etc. The old implementation truncated at NUL, and the
primed versions had to do extra work to avoid that problem. The new
implementation does not truncate at NUL, and is also a lot faster.
(Benchmarked at 2x faster for decodeBS and 3x for encodeBS; more for the
primed versions.)
Note that filepath-bytestring 1.4.2.1.8 contains the same optimisation,
and upgrading to it will speed up to/fromRawFilePath.
AFAIK, nothing relied on the old behavior of truncating at NUL. Some
code used the faster versions in places where I was sure there would not
be a NUL. So this change is unlikely to break anything.
Also, moved s2w8 and w82s out of the module, as they do not involve
filesystem encoding really.
Sponsored-by: Shae Erisson on Patreon
* sync: When --quiet is used, run git commit, push, and pull without
their ususual output.
* merge: When --quiet is used, run git merge without its usual output.
This might also make --quiet work better for some other commands
that make commits, like git-annex adjust.
Sponsored-by: Kevin Mueller on Patreon
Does not check the reflog, but otherwise works.
It's possible for it to display something that is not an annexed file,
if a non-annexed file somehow ends up containing something that looks
like the key's name. This seems very unlikely to happen, and it would
add a lot of complexity to detect it and somehow skip over that file,
since the git log would need to either be run again, or not limited to 1
result and canceled once enough results have been read.
Also, it kind of seems ok, if a file refers to a key, to consider that
as a place the key was used, for some definition of used. So, I punted
on dealing with that. May revisit later.
Sponsored-by: Brock Spratlen on Patreon
If .git/config symlinks are ever a thing, this will handle them better.
But mostly, this is to avoid git-repair needing to include CopyFile,
which would complicate it unduely.
In commit dfc4e641b5 git repair was changed
to use remote name, not url, when fetching. But it fetches into a temporary
git repo, which doesn't have remotes configured. Oops.
(In my defense, that commit was made just as covid lockdown started. But
testing? Urk.)
Sponsored-by: Mark Reidenbach on Patreon
Fixed bug that interrupting git-annex repair (or assistant) while it was
fixing repository corruption would lose objects that were contained in pack
files.
Unpack all pack files and move objects into place *before* deleting the
pack files. The old approach moved the pack files to a temp directory
before unpacking them, which was not interruption safe.
Sponsored-By: Jochen Bartl on Patreon
Eg, when git commit runs the smudge filter.
Commit 428c91606b introduced the crash,
as write-tree fails in those situations. Now it will work, and git-annex
always gets up-to-date information even in those situations. It does
need to do a bit more work, each time git-annex is run with the index
locked. Although if the index is unmodified from the last time
write-tree succeeded, that work is avoided.
Added a note to man page about what happens to information that is
recorded in the private journal. Since it uses Branch.get, that
information will be copied when options allow. It seemed better to allow
it and document it than not allow it, since the options allow excluding
repositories and so can be used to exclude private repos if desired.
Fix behavior of several commands, including reinject, addurl, and rmurl
when given an absolute path to an unlocked file, or a relative path that
leaves and re-enters the repository.
To avoid slowing down all the cases where the paths are already ok
with an unncessary call to getCurrentDirectory, put in an optimisation
in relPathCwdToFile. That will probably also speed up other parts of
git-annex by some small amount, but I have not benchmarked.
Note that I did not convert branchFileRef, because it seems likely that
it will be used with a file that is not provided by the user, so is already
in a sane format. This is certainly true for the way git-annex uses it,
though maybe arguable to the extent Git.Ref is a reusable library.
The slightly unusual parsing in Types.GitConfig avoids the need to look
at the remote list to get configs of remotes. annexPrivateRepos combines
all the configs, and will only be calculated once, so it's nice and
fast.
privateUUIDsKnown and regardingPrivateUUID now need to read from the
annex mvar, so are not entirely free. But that overhead can be optimised
away, as seen in getJournalFileStale. The other call sites didn't seem
worth optimising to save a single MVar access. The feature should have
impreceptable speed overhead when not being used.
If it's passed a ConfigKey such as annex.version, avoid returning
an empty remote name and return Nothing instead. Also, foo.bar.baz is
not treated as a remote named "bar".
Which generated unusual git trees that could confuse git merge,
since they incorrectly had 2 subtrees with the same name.
Root of the bug was a) not testing that at all! but also
b) confusing graftdirs, which contains eg "foo/bar" with
non-recursively read trees, which would contain eg "bar"
when reading a subtree of "foo".
It's worth noting that Annex.Import uses graftTree, but it really
shouldn't have needed to. Eg, when importing into foo/bar from a remote,
it's enough to generate a tree of foo/bar/x, foo/bar/y, and does not
include other files that are at the top of the master branch. It uses
graftTree, so it does include the other files, as well as the foo/bar
tree. git merge will do the same thing for both trees. With that said,
switching it away from graftTree would result in another import
generating a new commit that seems to delete files that were there in a
previous commit, so it probably has to keep using graftTree since it
used it before.
This commit was sponsored by Kevin Mueller on Patreon.
Seems that hasOrigin was never finding origin's git-annex branch, so a new
one got created each time. And so then it later needed to merge the two
branches, which is expensive.
Added --no-track to git branch to avoid it displaying a message about
setting up tracking branches. Of course there's no reason to make the
git-annex branch a tracking branch since git-annex auto-merges it.
Not yet used, but allows getting the size of items in the tree fairly
cheaply.
I noticed that CmdLine.Seek uses ls-tree and the feeds the files into
another long-running process to check their size. That would be an
example of a place that might be sped up by using this. Although in that
particular case, it only needs to know the size of unlocked files, not
locked. And since enabling --long probably doubles the ls-tree runtime
or more, the overhead of using it there may outwweigh the benefit.
I don't think this actually fixes any buggy behavior in git-annex, I
just noticed that using treeItemToLsTreeItem and then serializing it
resulted in something starting with "160000 blob" rather than
"160000 commit"
Git.Remote.parseRemoteLocation had a hack to handle URIs that contained
characters like spaces, which is something git unfortunately allows
despite not being a valid URI. However, that hack looked for "//" to
guess something was an URI, and these gcrypt URIs, being to a local
path, don't contain that. So instead escape all illegal characters and
check if the resulting thing is an URI.
And that was already done by Git.Construct.fromUrl, so
internally the gcrypt URI with a space looks like "gcrypt::foo%20bar"
and that needs to be de-escaped when converting back from URI to local
repo path.
This change might also allow a few other almost-valid URIs to be handled
as URIs by git-annex. None that contain "//" will change, and any
behavior change should result in git-annex doing closer to a right thing
than it did before, probably.
This commit was sponsored by Noam Kremen on Patreon.
When a git remote is configured with an absolute path, use that path,
rather than making it relative. If it's configured with a relative path,
use that.
Git.Construct.fromPath changed to preserve the path as-is,
rather than making it absolute. And Annex.new changed to not
convert the path to relative. Instead, Git.CurrentRepo.get
generates a relative path.
A few things that used fromAbsPath unncessarily were changed in passing to
use fromPath instead. I'm seeing fromAbsPath as a security check,
while before it was being used in some cases when the path was
known absolute already. It may be that fromAbsPath is not really needed,
but only git-annex-shell uses it now, and I'm not 100% sure that there's
not some input that would cause a relative path to be used, opening a
security hole, without the security check. So left it as-is.
Test suite passes and strace shows the configured remote url is used
unchanged in the path into it. I can't be 100% sure there's not some code
somewhere that takes an absolute path to the repo and converts it to
relative and uses it, but it seems pretty unlikely that the code paths used
for a git remote would call such code. One place I know of is gitAnnexLink,
but I'm pretty sure that git remotes never deal with annex symlinks. If
that did get called, it generates a path relative to cwd, which would have
been wrong before this change as well, when operating on a remote.
Fixed that, and made parserLsTree accept the space as well as tab.
Fixes a reversion that made import of a tree from a special remote result in
a merge that deleted files that were not preferred content of that special
remote.
After the last commit, it was able to throw errors just due to an
unparseable url. This avoids needing to worry about that, as long
as the call site has already checked that it has a parseable url.
Including the non-standard URI form that git-remote-gcrypt uses for rsync.
Eg, "ook://foo:bar" cannot be parsed because "bar" is not a valid port
number. But git could have a remote with that, it would try to run
git-remote-ook to handle it. So, git-annex has to allow for such things,
rather than crashing.
This commit was sponsored by Luke Shumaker on Patreon.
In addition to regular file deletions, the removefiles argument passed
to adjustTree may contain removed submodules. When making the new
tree, filter these out in the same way that is done for regular files
so that the deletion is propagated.
This is conceptually very simple, just making a 1 that was hard coded be
exposed as a config option. The hard part was plumbing all that, and
dealing with complexities like reading it from git attributes at the
same time that numcopies is read.
Behavior change: When numcopies is set to 0, git-annex used to drop
content without requiring any copies. Now to get that (highly unsafe)
behavior, mincopies also needs to be set to 0. It seemed better to
remove that edge case, than complicate mincopies by ignoring it when
numcopies is 0.
This commit was sponsored by Denis Dzyubenko on Patreon.
I don't think this affected git-annex currently, but if the same command
was queued twice with different params, one set of params was thrown
away, and the files going with those were run with the other set of
params.
This makes sync a lot faster in the common case where there's no new
backup.
There's still room for it to be faster. Currently the old imported tree
has to be traversed, to generate the ImportableContents. Which then
gets turned around to generate the new imported tree, which is
identical. So, it would be possible to just return a "no new imports",
or an ImportableContents that has a way to graft in a tree. The latter
is probably too far to go to optimise this, unless other things need it.
The former might be worth it, but it's already pretty fast, since git
ls-tree is pretty fast.
9cb250f7be got the ones in RawFilePath,
but there were others that used the one from unix-compat, which fails at
runtime on windows. To avoid this,
import System.PosixCompat.Files hiding removeLink
This commit was sponsored by Ethan Aubin.
I'm not sure if git documents it aside from 0 and 1, but any integer
can be interpreted as a bool by it. Doing the same in git-annex is good
for consistency. Also, I am planning a config that starts out as a
numeric range, but will later transition to a simple bool (hopefully),
which this interpretation supports well.
All properties changed to use them, except for
prop_encode_c_decode_c_roundtrip, which already filtered to ascii
for other reasons.
A few modules had to be split out, because Setup does not build-depend
on QuickCheck.
nukeFile replaced with removeWhenExistsWith removeLink, which allows
using RawFilePath. Utility.Directory cannot use RawFilePath since setup
does not depend on posix.
This commit was sponsored by Graham Spencer on Patreon.
Notable wins in Annex.Locations which was sometimes doing 6 conversions
in a single function call.
This commit was sponsored by Denis Dzyubenko on Patreon.
This reverts commit c142696c58.
It turns out it was not needed; 681313dfd4
fixed up the git dir, so setting cwd to it works ok.
But worst, this commit broke the test suite massively. I don't understand how.
git-annex get was failing. Very weirdly, git-annex find in a fresh
clone of an annex repo, during autoinit, was displaying a side message
-- but side messages are disabled when running find.
This fixes the bug.
Note, it's only done when GIT_DIR is set. When it's not set,
Git.Construct already handled it. This is why it was only noticed with this
git submodule command.
This commit was sponsored by Brett Eisenberg on Patreon.
If .git is a gitlink file, setting cwd to it will fail, but --git-dir
will succeed. And this is the only place where it sets cwd when running
git, everywhere else already uses --git-dir.
Note that, git-annex's submodule fixup code usually converts gitlink
files to symlinks, so this wasn't usually problem. Still, worth fixing.
This commit was sponsored by Svenne Krap on Patreon.
This was the last one marked as a zombie. There might be others I don't
know about, but except for in the hypothetical case of a thread dying
due to an async exception before it can wait on a process it started, I
don't know of any.
It would probably be safe to remove the reapZombies now, but let's wait
and so that in its own commit in case it turns out to cause problems.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Eliminate a zombie that was only cleaned up by the later zombie cleanup
code.
This is still not ideal, it would be cleaner if it used conduit or
something, and if the thread gets killed before waiting, it won't stop
the process.
Only remaining zombies are in CmdLine.Seek
This is only needed for the i386ancient build, so build in the git
version git-annex is built with, assuming git won't be upgraded, or if
it is, they just won't get the speedup of --buffer
This was a bit disappointing, I was hoping for a 2x speedup. But, I think
the metadata lookup is wasting a lot of time and also needs to be made to
stream.
The changes to catObjectStreamLsTree were benchmarked to not also speed
up --all around 3% more. Seems I managed to make it polymorphic after all.
The catObjectStream' is generic enough to let it be nicely used from
inside Annex monad.
Chan will be faster than DList here. Bearing in mind, it is unbounded,
but in reality will be bounded by the size of the stdio buffer through
git cat-file.
This speeds up --all by about 10% although I think only getting back to
the previous performance before I introduced that DList.
planned to use for an optimisation
most things using stagedDetails were not expecting to get dup files in a
conflicted merge and deal with them, so converted them to use
inRepoDetails.
And convert parser to attoparsec, probably faster.
Before, a parse failure threw the whole --stage output line in to the
filename, which was certianly a bad idea, so fixed that.
Turns out the %(rest) trick was not needed. Instead, just maintain a
list of files we've asked for, and each cat-file response is for the
next file in the list.
This actually benchmarks 25% faster than before! Very surprising, but it
must be due to needing to shove less data through the pipe, and parse
less.
This assumes that no location log files will have a newline or carriage
return in their name. catObjectStream skips any such files due to
cat-file not supporting them.
Keys have been prevented from containing newlines since 2011,
commit 480495beb4. If some old repo
had a key with a newline in it, --all will just skip processing that key.
Other things, like .git/annex/unused files certianly assume no newlines in
keys too, and AFAICR, such keys never actually worked.
Carriage return is escaped by preSanitizeKeyName since 2013. WORM keys
generated before that point could perhaps contain a CR. (URL probably not,
http probably doesn't support an URL with a raw CR in it.) So, added
a warning in fsck about such keys. Although, fsck --all will naturally
skip them, so won't be able to warn about them. Not entirely
satisfactory, but I'll bet there are not really any such keys in
existence.
Thanks to Lukey for finding this optimisation.
Fixes reversion in recent conversions, the old code relied on the GC
apparently, but the new code explicitly waits on the process, so must
close stdin handle first or the command will never exit.
Except for the assistant, which I think may use them between threads?
Most of the uses of SomeException were already catching only async exceptions.
But I did find a few places that were accidentially catching them.
This handles all createProcessSuccess callers, and aside from process
pools, the complete conversion of all process running to async exception
safety should be complete now.
Also, was able to remove from Utility.Process the old API that I now
know was not a good idea. And proof it was bad: The code size went *down*,
despite there being a fair bit of boilerplate for some future API to
reduce.
This handles all sites where checkSuccessProcess/ignoreFailureProcess
is used, except for one: Git.Command.pipeReadLazy
That one will be significantly more work to convert to bracketing.
(Also skipped Command.Assistant.autoStart, but it does not need to
shut down the processes it started on exception because they are
git-annex assistant daemons..)
forceSuccessProcess is done, except for createProcessSuccess.
All call sites of createProcessSuccess will need to be converted
to bracketing.
(process pools still todo also)
Not yet 100% done, so far I've grepped for waitForProcess and converted
everything that uses that to start the process with withCreateProcess.
Except for some things like P2P.IO and Assistant.TransferrerPool,
and Utility.CoProcess, that manage a pool of processes. See #2
in https://git-annex.branchable.com/todo/more_extensive_retries_to_mask_transient_failures/#comment-209f8a8c38e63fb3a704e1282cb269c7
for how those will need to be dealt with.
checkSuccessProcess, ignoreFailureProcess, and forceSuccessProcess calls waitForProcess, so
callers of them will also need to be dealt with, and have not been yet.
Added annex.skipunknown git config, that can be set to false to change the
behavior of commands like `git annex get foo*`, to not skip over files/dirs
that are not checked into git and are explicitly listed in the command
line.
Significant complexity was needed to handle git-annex add, which uses some
git ls-files calls, but needs to not use --error-unmatch because of course
the files are not known to git.
annex.skipunknown is planned to change to default to false in a
git-annex release in early 2022. There's a todo for that.
User reported git@my.gitlab.foo:username/myrepo.git didn't work with
git-repair, because it rewrites it to an url
ssh://git@my.gitlab.foo/~/username/myrepo.git
and the /~/ was not something the hosting site supported.
Since git-annex still generally needs the repo url to be well, an url, did
not change the conversion code. But in this case, we're running git fetch,
so we might as well pass it the remote name rather than the url.
Did a quick audit of repoLocation uses to see if there was anything else
like this problem elsewhere, and didn't see any. But this is not the first
time this special case in git and git-annex's attempt to de-special-case
it has caused a problem..
A couple of these were probably actual bugs in edge cases. Most of the
changes I'm fine with. The fact that aeson's object returns sometihng
that we know will be an Object, but the type checker does not know is
kind of annoying.
