Not yet used, but allows getting the size of items in the tree fairly
cheaply.
I noticed that CmdLine.Seek uses ls-tree and the feeds the files into
another long-running process to check their size. That would be an
example of a place that might be sped up by using this. Although in that
particular case, it only needs to know the size of unlocked files, not
locked. And since enabling --long probably doubles the ls-tree runtime
or more, the overhead of using it there may outwweigh the benefit.
Configuring chunking and encryption for a git remote has no effect, so
skip testing those variants in the TestRemote call.
It would be better if TestRemote itself could do this, but it
doesn't seem possible there. There is no way to look at a Remote and
tell if it supports chunking or encryption.
Note that, while the test suite displays output as it it's testing
exporting, it actually skips doing anything for the tests when run on
the git remote. So at least does not waste time even though the output
is not ideal.
This commit was sponsored by Noam Kremen on Patreon.
The test suite contains its own tests that test a lot of basic stuff
about git remotes, mostly in passing to set up other situations.
But testremote does try some unusual edge cases, which may as
well be tried for git remotes as well as directory, especially since
it's so little code to add it.
This commit was sponsored by Kevin Mueller on Patreon.
Display the transcript as part of the failure message for the assertion.
This avoids scrambling the tasty display.
This commit was sponsored by Ethan Aubin on Patreon.
Only displaying git-annex and git command output when something went wrong.
A few could still leak stderr. These include the couple of calls
to readProcess, which reads stdin but lets stderr through. But they don't
leak any usually, so probably only would when failing anyway.
Currently, there is no excess output at all!
This commit was sponsored by Brock Spratlen on Patreon.
9cb250f7be got the ones in RawFilePath,
but there were others that used the one from unix-compat, which fails at
runtime on windows. To avoid this,
import System.PosixCompat.Files hiding removeLink
This commit was sponsored by Ethan Aubin.
There is already one for drop, but move and drop don't handle numcopies
exactly the same, and there was recently a reversion in it checking
numcopies properly at all.
This commit was sponsored by Noam Kremen on Patreon.
All properties changed to use them, except for
prop_encode_c_decode_c_roundtrip, which already filtered to ascii
for other reasons.
A few modules had to be split out, because Setup does not build-depend
on QuickCheck.
nukeFile replaced with removeWhenExistsWith removeLink, which allows
using RawFilePath. Utility.Directory cannot use RawFilePath since setup
does not depend on posix.
This commit was sponsored by Graham Spencer on Patreon.
Had to split out some modules because getWorkingDirectory needs unix,
which is not a build-dep of configure.
This commit was sponsored by Brock Spratlen on Patreon.
And add a test case for that.
This certianly loses some of the 2x performance improvement in file
seeking that seekFilteredKeys led to, because now it has to stat the
worktree files again. Without benchmarking, I expect there will still be
a sizable improvement, and also the git-annex branch precaching that
seekFilteredKeys can do will still be a win of its approach.
Also worth noting that lookupKey, when the file DNE, check if it's in an
adjusted branch with hidden files, and if so, finds the key for the
file anyway. That was intended to make git-annex sync --content be able
to process those files, but a side effect was that, when a file was
deleted but the deletion not yet staged, git-annex commands used to
still list it. That was actually a bug. This commit fixes that bug too.
(git-annex sync --content on such a branch does not use seekFilteredKeys
so was not affected by the reversion or by this behavior change)
This commit was sponsored by Jake Vosloo on Patreon.
git is making that configurable, and configuring it globally would break
the test suite in a few places.
No other part of git-annex assumes any branch name. Renamed a few
placeholders to make that clearer.
This commit was sponsored by Jake Vosloo on Patreon.
Not yet 100% done, so far I've grepped for waitForProcess and converted
everything that uses that to start the process with withCreateProcess.
Except for some things like P2P.IO and Assistant.TransferrerPool,
and Utility.CoProcess, that manage a pool of processes. See #2
in https://git-annex.branchable.com/todo/more_extensive_retries_to_mask_transient_failures/#comment-209f8a8c38e63fb3a704e1282cb269c7
for how those will need to be dealt with.
checkSuccessProcess, ignoreFailureProcess, and forceSuccessProcess calls waitForProcess, so
callers of them will also need to be dealt with, and have not been yet.
Todo item is done at last.
Might later want to think about testing some other types of remotes that
can be tested locally. The git remote itself is probably already well
enough tested by the test suite that testremote is not needed. Could
test things like bup, or rsync to a local directory. Or even external,
although that would require embedding an external special remote program
into the test suite..
Due to eg, too long a path to the agent socket, caused by running gpg in a
container where /run is not mounted, and/or some other gpg behavior like
unnecessarily making relative paths to its home directory absolute.
Considered using the system tmp dir rather than putting it inside .t/,
but then if TEMP were set to a long path, that would be a problem.
Relative path seems the best approach, and will always be nice and
short.
The only downside of it is, if git-annex somehow changes the cwd
while running, it would break. But git-annex does not do that, and
should never do that.
Fix serious regression in gcrypt and encrypted git-lfs remotes.
Since version 7.20200202.7, git-annex incorrectly stored content
on those remotes without encrypting it.
Problem was, Remote.Git enumerates all git remotes, including git-lfs
and gcrypt. It then dispatches to those. So, Remote.List used the
RemoteConfigParser from Remote.Git, instead of from git-lfs or gcrypt,
and that parser does not know about encryption fields, so did not
include them in the ParsedRemoteConfig. (Also didn't include other
fields specific to those remotes, perhaps chunking etc also didn't
get through.)
To fix, had to move RemoteConfig parsing down into the generate methods
of each remote, rather than doing it in Remote.List.
And a consequence of that was that ParsedRemoteConfig had to change to
include the RemoteConfig that got parsed, so that testremote can
generate a new remote based on an existing remote.
(I would have rather fixed this just inside Remote.Git, but that was not
practical, at least not w/o re-doing work that Remote.List already did.
Big ugly mostly mechanical patch seemed preferable to making git-annex
slower.)
git-annex find is now RawFilePath end to end, no string conversions.
So is git-annex get when it does not need to get anything.
So this is a major milestone on optimisation.
Benchmarks indicate around 30% speedup in both commands.
Probably many other performance improvements. All or nearly all places
where a file is statted use RawFilePath now.
Since the sqlite branch uses blobs extensively, there are some
performance benefits, ByteStrings now get stored and retrieved w/o
conversion in some cases like in Database.Export.
Finally builds (oh the agoncy of making it build), but still very
unmergable, only Command.Find is included and lots of stuff is badly
hacked to make it compile.
Benchmarking vs master, this git-annex find is significantly faster!
Specifically:
num files old new speedup
48500 4.77 3.73 28%
12500 1.36 1.02 66%
20 0.075 0.074 0% (so startup time is unchanged)
That's without really finishing the optimization. Things still to do:
* Eliminate all the fromRawFilePath, toRawFilePath, encodeBS,
decodeBS conversions.
* Use versions of IO actions like getFileStatus that take a RawFilePath.
* Eliminate some Data.ByteString.Lazy.toStrict, which is a slow copy.
* Use ByteString for parsing git config to speed up startup.
It's likely several of those will speed up git-annex find further.
And other commands will certianly benefit even more.
The test suite found a bug; select_ can fail now because a uniqueness
constrain has been added.
Now the test suite passes.
Also, I'm satisfied the changed PersistField instances work.
Looking over what changed, and what I've already tested, Key, FilePath,
and InodeCache are known working; ContentIdentifier is trivial
ByteString to blob; and SSha is trivial String to varchar. Both are
tested by the test suite. I've also tested the new FileSize and
EpochTime instances already, and they work.
* merge: When run with a branch parameter, merges from that branch.
This is especially useful when using an adjusted branch, because
it applies the same adjustment to the branch before merging it.
On second thought, the extra time running the test suite is worth it.
It will be gained back once we finally get rid of direct mode.
There are two failing tests, same two that have been failing on windows
(though the failure does not look identical). So this should also spare me
the Windows VM while fixing.
The sync is only to sync up the adjusted branch, not other info.
Since many tests use their own special remote named "foo",
the push broke later tests.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
The gitAnnexTmpOtherDir cleanup made it be deleted too early sometimes,
and so the test suite failed. Also there was a report of a similar
failure which likely had a similar cause and hopwfully this fixes that
too.
* Switch to using .git/annex/othertmp for tmp files other than partial
downloads, and make stale files left in that directory when git-annex
is interrupted be cleaned up promptly by subsequent git-annex processes.
* The .git/annex/misctmp directory is no longer used and git-annex will
delete anything lingering in there after it's 1 week old.
Also, in Annex.Ingest, made the filename it uses in the tmp dir be
prefixed with "ingest-" to avoid potentially using a filename used by
some other code.
What these generate is not really suitable to be used as a filename,
which is why keyFile and fileKey further escape it. These are just
serializing Keys.
Also removed a quickcheck test that was very unlikely to test anything
useful, since it relied on random chance creating something that looks
like a serialized key. The other test is sufficient for testing what
that was intended to test anyway.
This preserves the workaround for the old bug that caused NoUUID items
to be stored in the log, prefixing log lines with " ". It's now handled
implicitly, by using takeWhile1 (/= ' ') to get the uuid.
There is a behavior change from the old parser, which split the value
into words and then recombined it. That meant that "foo bar" and "foo\tbar"
came out as "foo bar". That behavior was not documented, and seems
surprising; it meant that after a git-annex describe here "foo bar",
you wouldn't get that same string back out when git-annex displayed repo
descriptions.
Otoh, some other parsers relied on the old behavior, and the attoparsec
rewrites had to deal with the issue themselves...
For group.log, there are some edge cases around the user providing a
group name with a leading or trailing space. The old parser would ignore
such excess whitespace. The new parser does too, because the alternative
is to refuse to parse something like " group1 group2 " due to excess
whitespace, which would be even more confusing behavior.
The only git-annex branch log file that is not converted to attoparsec
and bytestring-builder now is transitions.log.
Most of the individual logs are not converted yet, only presense logs
have an efficient ByteString Builder implemented so far. The rest
convert to and from String.
init: When --version=5 is passed on a crippled filesystem, use a v5 direct
mode repo as requested, rather than upgrading to v7 adjusted unlocked.
Fixed test suite on crippled filesystems, making it request --version=5
to test direct mode.
Deleting directories is one of the great unsolved problems of CS, thanks to
abominations like NFS lock files and Windows and races with other processes
cleaning up after themselves in the background. The gpg test harness
sometimes failed to delete its temp directory on NFS. Avoid the problem
class by not deleting it at all, and putting it inside the tmp repo being
tested. The test suite's more robust (and/or nonsensical) workarounds for
deleting its test dir will thus be used, hopefully avoiding the problem
until an OS finds a new way to violate POSIX and the laws of nature.
Note that this means that the .gnupg directory will be on whatever
filesystem the test suite is being run on, which may be a lesser quality
filesystem than gpg is really expecting. Gpg does not seem to need to
write sockets etc to there so this seems ok. The only known problem is
that if the filesystem forces a directory mode like 777, gpg will warn
about unsafe home directory perms, but it still works.
Not the first time this kind of test suite breakage has happened..
It would be good to avoid somehow it looking up from .t and finding a git
repo. But just running the test suite from time to time outside of
git-annex would also let me notice these before the distribution packagers
do.
This commit was sponsored by mo on Patreon.
Instead remove enough data from it that this regression test tests what
it needs to.
Moving the database was the last thing that made the test suite
unstable, including sometimes hanging completely. It seems that, despite
closeDb being called before the move, sqlite was not quite done with it,
and somehow this causes other sqlite handles to become unstable. Not
good.
With this change, the test suite has successfully run 100+ times without
any issues.
I've seen intermittent failures of the test suite with v6 for a long time,
it seems to have possibly gotten worse with the changes around v7. Or just
being unlucky; all tests failed today.
Seen on amd64 and i386 builders, repeatedly but intermittently:
unused: FAIL (4.86s)
Test.hs:928:
git diff did not show changes to unlocked file
And I think other such failures, all involving v7/v6 mode tests.
I managed to reproduce the unused failure with --keep-failures,
and inside the repo, git diff was indeed not showing any changes for
the modified unlocked file.
The two stats will be the same other than mtime; the old and new files have
the same size and inode, since the test case writes to the file and then
overwrites it.
Indeed, notice the identical timestamps:
builder@orca:~/gitbuilder/build/.t/tmprepo335$ echo 1 > foo; stat foo; echo 2 > foo; stat foo
File: foo
Size: 2 Blocks: 8 IO Block: 4096 regular file
Device: 801h/2049d Inode: 3546179 Links: 1
Access: (0644/-rw-r--r--) Uid: ( 1000/ builder) Gid: ( 1000/ builder)
Access: 2018-10-29 22:14:10.894942036 +0000
Modify: 2018-10-29 22:14:10.894942036 +0000
Change: 2018-10-29 22:14:10.894942036 +0000
Birth: -
File: foo
Size: 2 Blocks: 8 IO Block: 4096 regular file
Device: 801h/2049d Inode: 3546179 Links: 1
Access: (0644/-rw-r--r--) Uid: ( 1000/ builder) Gid: ( 1000/ builder)
Access: 2018-10-29 22:14:10.894942036 +0000
Modify: 2018-10-29 22:14:10.898942036 +0000
Change: 2018-10-29 22:14:10.898942036 +0000
Birth: -
I'm seeing this in Linux VMs; it doesn't happen on my laptop. I've also
not experienced the intermittent test suite failures on my laptop.
So, I hope that this small delay will avoid the problem.
Update: I didn't, indeed I then reproduced the same failure on my
laptop, so it must be due to something else. But keeping this change anyway
since not needing to worry about lowish-resolution mtime in the test suite seems
worthwhile.
Install new git hooks in this version.
This does beg the question of what to do if git later gets eg a
post-smudge hook, that could run git-annex smudge --update. I think the
thing to do in that case would be to make git-annex smudge --update
install the new hooks. That way, as the user uses git-annex, the hook
would be created pretty quickly and without needing any extra syscalls
except for when git-annex smudge --update is called.
I considered doing something like that for installation of the
post-checkout and post-merge hooks, which would have avoided the need
for v7. But the only place it was cheap to do it would be in git-annex smudge
which could cheaply notice that smudge.log didn't exist yet and so know
the hooks needed to be installed. But since smudge used to populate pointer
files, it would be quite surprising if a single git checkout/merge failed
to update the work tree, and so that idea didn't work out.
The other reason for v7 is psychological -- users don't need to worry
about whether they might be running an old version of git-annex that
doesn't support their v7 repository very well. And bug reports about
"v6" have gotten a bit of a bad association in my head since they often
hit one of the known limitations and didn't realize it was experimental.
newtyped RepoVersion Int to avoid needing 2 comparisons in
versionSupportsUnlockedPointers etc. Also it's just nicer.
This commit was sponsored by John Pellman on Patreon.
It was trying to git annex adjust when in a direct mode repo, and that
of course fails. What I don't understand though, is how the test suite
managed to work before, when it was clearly checking the wrong thing.
Since the right way to fix it was obvious, I have not bisected.
This work is supported by the NIH-funded NICEMAN (ReproNim TR&D3) project.
Security fix! Allowing any schemes, particularly file: and
possibly others like scp: allowed file exfiltration by anyone who had
write access to the git repository, since they could add an annexed file
using such an url, or using an url that redirected to such an url,
and wait for the victim to get it into their repository and send them a copy.
* Added annex.security.allowed-url-schemes setting, which defaults
to only allowing http and https URLs. Note especially that file:/
is no longer enabled by default.
* Removed annex.web-download-command, since its interface does not allow
supporting annex.security.allowed-url-schemes across redirects.
If you used this setting, you may want to instead use annex.web-options
to pass options to curl.
With annex.web-download-command removed, nearly all url accesses in
git-annex are made via Utility.Url via http-client or curl. http-client
only supports http and https, so no problem there.
(Disabling one and not the other is not implemented.)
Used curl --proto to limit the allowed url schemes.
Note that this will cause git annex fsck --from web to mark files using
a disallowed url scheme as not being present in the web. That seems
acceptable; fsck --from web also does that when a web server is not available.
youtube-dl already disabled file: itself (probably for similar
reasons). The scheme check was also added to youtube-dl urls for
completeness, although that check won't catch any redirects it might
follow. But youtube-dl goes off and does its own thing with other
protocols anyway, so that's fine.
Special remotes that support other domain-specific url schemes are not
affected by this change. In the bittorrent remote, aria2c can still
download magnet: links. The download of the .torrent file is
otherwise now limited by annex.security.allowed-url-schemes.
This does not address any external special remotes that might download
an url themselves. Current thinking is all external special remotes will
need to be audited for this problem, although many of them will use
http libraries that only support http and not curl's menagarie.
The related problem of accessing private localhost and LAN urls is not
addressed by this commit.
This commit was sponsored by Brett Eisenberg on Patreon.
This was badly named, it's a not a blob necessarily, but anything that a
tree can refer to.
Also removed the Show instance which was used for serialization to git
format, instead use fmtTreeItemType.
This commit was supported by the NSF-funded DataLad project.
As long as all code imports Utility.Aeson rather than Data.Aeson,
and no Strings that may contain utf-8 characters are used for eg, object
keys via T.pack, this is guaranteed to fix the problem everywhere that
git-annex generates json.
It's kind of annoying to need to wrap ToJSON with a ToJSON', especially
since every data type that has a ToJSON instance has to be ported over.
However, that only took 50 lines of code, which is worth it to ensure full
coverage. I initially tried an alternative approach of a newtype FileEncoded,
which had to be used everywhere a String was fed into aeson, and chasing
down all the sites would have been far too hard. Did consider creating an
intentionally overlapping instance ToJSON String, and letting ghc fail
to build anything that passed in a String, but am not sure that wouldn't
pollute some library that git-annex depends on that happens to use ToJSON
String internally.
This commit was supported by the NSF-funded DataLad project.
Prevent ghc and llc from running out of memory when optimising some
files.
Sean Whitton reported that doing this only in Test.hs was insufficient,
the build still OOMed by the time it got to Test.hs. He had earlier found
the build worked when these options are applied globally.
See https://ghc.haskell.org/trac/ghc/ticket/14821 for why it needs -O1;
once that's fixed it may suffice to use "GHC-Options: -O2 -optlo-O2",
although it may also be that the -O1 prevents ghc from using/leaking
as much memory.
os(arm) should match armel, armhf, armeb, and arm.
It probably also matches arm64, somewhat unfortunately since arm64
systems probably tend to have more memory. See list of arches in
https://hackage.haskell.org/package/Cabal-1.22.2.0/docs/src/Distribution-System.html
This commit was sponsored by Henrik Riomar on Patreon.
The ghc options were found by Sean Whitton; the debian arm autobuilders
need those to build w/o OOM, and it seems to involve llvm using too much
memory to optimize Test.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Fourth or fifth try at this and finally found a way to make it work.
Absurd amount of busy-work forced on me by change in cabal's behavior.
Split up Utility modules that need posix stuff out of ones used by
Setup. Various other hacks around inability for Setup to use anything
that ifdefs a use of unix.
Probably lost a full day of my life to this.
This is how build systems make their users hate them. Just saying.
This reverts commit 51228c2306.
No, still doesn't work when built with cabal. It did with stack; stack
must somehow make the unix package implicitly available.
With cabal, System.Posix.Process and System.Posix.Env are both missing.
Seems I had all the work in past commits to make this build, at least on
linux. I'm actually surprised it does, without a unix dep, Utility.Env
still builds ok somehow despite using System.Posix.Env.
This commit was sponsored by Fernando Jimenez on Patreon.
Test suite is always included.
Building with this flag disabled has actually been broken for some time,
since Command.TestRemote uses tasty. Fewer build flags are better, so good
time to drop it.
This commit was sponsored by Thomas Hochstein on Patreon.
This avoids warnings from stack about the module not being listed in the
cabal file. So, the generated file is also renamed to Build/SysConfig.
Note that the setup program seems to be cached despite these changes; I
had to cabal clean to get cabal to update it so that Build/SysConfig was
written.
This commit was sponsored by Jochen Bartl on Patreon.
A top-level .noannex file will prevent git-annex init from being used in a
repository. This is useful for repositories that have a policy reason not
to use git-annex. The content of the file will be displayed to the user who
tries to run git-annex init.
This also affects git annex reinit and initialization via the webapp.
It does not affect automatic inits, when there's a sibling git-annex branch
already.
This commit was supported by the NSF-funded DataLad project.
af6068525a seems to not have worked;
though the keys database should not have any files open after closeDb,
NFS seems to be creating some files where while the directory is being
removed, which causes the removal to fail.
So instead, try renaming the directory out of the way.
This commit was supported by the NSF-funded DataLad project.
They need unix on non-windows, for Utility.Env, which Build.Configure uses,
but cabal can't express that in a custom-setup stanza.
To avoid this problem, Utility.Env would need to be moved into
unix-compat..
Windows needs the setenv package in custom-setup, but I don't want to
pull it in on unix, which would probably break some builds and need more
work. Instead, split out setEnv to a separate module.
Quite likely, unix-compat will get a portable environment layer, and
then both modules can be removed from here.
This commit was sponsored by Øyvind Andersen Holm.
Fix process and file descriptor leak that was exposed when git-annex was
built with ghc 8.2.1. Apparently ghc has changed its behavior of GC
of open file handles that are pipes to running processes. That
broke git-annex test on OSX due to running out of FDs.
Audited for all uses of Annex.new and made stopCoProcesses be called
once it's done with the state. Fixed several places that might have
leaked in other situations than running the test suite.
This commit was sponsored by Ewen McNeill.
Using annexeval to run probeCrippledFileSystem' caused Git.CurrentRepo.get
to be run. Fixed easily since probeCrippledFileSystem' had no need to use
the Annex monad.
This commit was sponsored by Ethan Aubin.
Added remote configuration settings annex-ignore-command and
annex-sync-command, which are dynamic equivilants of the annex-ignore
and annex-sync configurations.
For this I needed a new DynamicConfig infrastructure. Its implementation
should be as fast as before when there is no dynamic config, and it caches
so shell commands are only run once.
Note that annex-ignore-command exits nonzero when the remote should be ignored.
While that may seem backwards, it allows using the same command for it as
for annex-sync-command when you want to disable both.
This commit was sponsored by Trenton Cronholm on Patreon.
By forking a worker process and only deleting the test directory once it exits.
This way, if a test leaves files open, they'll get closed when the worker
exits, so avoiding failure to delete open files on Windows, and failure to
delete directories due to NFS lock files.
If a test leaves a git worker process running, the closed pipes should
cause the worker to exit too, also avoiding the problem there. The 10
second sleep ought to give plenty of time for such worker processes to
exit, although this is of course a race.
Finally, even if test directory fails to be deleted still,
it won't appear as if the last test in the test suite failed; the error
will be displayed at the very end.
This commit was supported by the NSF-funded DataLad project.
Should fix this:
lock (v6 --force): FAIL
Exception: .git/annex/keys: removeDirectoryRecursive: unsatisfied constraints (Directory not empty)
Verified that the test case still catches the regression it's meant to.
This commit was supported by the NSF-funded DataLad project.
