The former can be useful to make remotes that don't get fully synced with
local changes, which comes up in a lot of situations.
The latter was mostly added for symmetry, but could be useful (though less
likely to be).
Implementing `remote.<name>.annex-pull` was a bit tricky, as there's no one
place where git-annex pulls/fetches from remotes. I audited all
instances of "fetch" and "pull". A few cases were left not checking this
config:
* Git.Repair can try to pull missing refs from a remote, and if the local
repo is corrupted, that seems a reasonable thing to do even though
the config would normally prevent it.
* Assistant.WebApp.Gpg and Remote.Gcrypt and Remote.Git do fetches
as part of the setup process of a remote. The config would probably not
be set then, and having the setup fail seems worse than honoring it if it
is already set.
I have not prevented all the code that does a "merge" from merging branches
from remotes with remote.<name>.annex-pull=false. That could perhaps
be done, but it would need a way to map from branch name to remote name,
and the way refspecs work makes that hard to get really correct. So if the
user fetches manually, the git-annex branch will get merged, for example.
Anther way of looking at/justifying this is that the setting is called
"annex-pull", not "annex-merge".
This commit was supported by the NSF-funded DataLad project.
The slowdown is not going to be large in typical small-ish repos.
And it does not seem to matter if the assistant reacts a little bit slower
in situations involving the expensive scan, since:
a) Those situations typically involve getting back in sync after something
has changed on a remote, often after a disconnect of some duration.
So taking a few seconds more is not noticable.
b) If the scan finds things that it needs to do, it will start
blocking anyway after 10 transfers are queued (due to use of
queueTransferWhenSmall). So, only the speed of finding the first 10
transfers will be impacted by this change.
This commit was sponsored by Jochen Bartl on Patreon.
9c4650358c changed the Read instance for
Key.
I've checked all uses of that instance (by removing it and seeing what
breaks), and they're all limited to the webapp, except one.
That is GitAnnexDistribution's Read instance.
So, 9c4650358c would have broken upgrades
of git-annex from downloads.kitenet.net. Once the .info files there got
updated for a new release, old releases would have failed to parse them
and never upgraded.
To fix this, I found a way to make the .info files that contain
GitAnnexDistribution values be readable by the old version of git-annex.
This commit was sponsored by Ewen McNeill.
Where before the "name" of a key and a backend was a string, this makes
it a concrete data type.
This is groundwork for allowing some varieties of keys to be disabled
in file2key, so git-annex won't use them at all.
Benchmarks ran in my big repo:
old git-annex info:
real 0m3.338s
user 0m3.124s
sys 0m0.244s
new git-annex info:
real 0m3.216s
user 0m3.024s
sys 0m0.220s
new git-annex find:
real 0m7.138s
user 0m6.924s
sys 0m0.252s
old git-annex find:
real 0m7.433s
user 0m7.240s
sys 0m0.232s
Surprising result; I'd have expected it to be slower since it now parses
all the key varieties. But, the parser is very simple and perhaps
sharing KeyVarieties uses less memory or something like that.
This commit was supported by the NSF-funded DataLad project.
This allows using functions that generate CreateProcess and passing the
result to processTranscript', which is more flexible, and also simpler
than the old interface.
This commit was sponsored by Riku Voipio.
... to avoid it consuming stdin that it shouldn't.
This fixes git-annex-checkpresentkey --batch remote, which didn't output
results for all keys passed into it.
Other git-annex commands that communicate with a remote over ssh may also
have been consuming stdin that they shouldn't have, which could have
impacted using them in eg, shell scripts. For example, a shell script
reading files from stdin and passing them to git annex drop would be
impacted by this bug, whenever git annex drop ran git-annex-shell
checkpresent, it would consume part/all of the stdin that the shell script
was supposed to consume.
Fixed by adding a ConsumeStdin parameter to Annex.Ssh.sshOptions, which
is used throughout git-annex to run ssh (in order for ssh connection
caching to work). Every call site was checked to see if it used
CreatePipe for stdin, and if not was marked NoConsumeStdin.
Users occasionally report this error firing, and I can't see why,
so include the rejected PairData in the error message.
This is safe even if it contains evil escape characters, because showing
it displays them in escaped form.
This commit was sponsored by Bruno BEAUFILS on Patreon.
import: --deduplicate and --skip-duplicates were implemented inneficiently;
they unncessarily hashed each file twice. They have been improved to only
hash once.
The new approach is to lock down (minimally) and hash files, and then
reuse that information when importing them.
This was rather tricky, especially in detecting changes to files while
they are being imported.
The output of import changed slightly. While before it silently skipped
over files with eg --skip-duplicates, now it shows each file as it starts
to act on it. Since every file is hashed first thing, it would otherwise
not be clear what file import is chewing on. (Actually, it wasn't clear
before when any of the duplicates switches were used.)
This commit was sponsored by Alexander Thompson on Patreon.
Most remotes have an idempotent setup that can be reused for
enableremote, but in a few cases, it needs to tell which, and whether
a UUID was provided to setup was used.
This is groundwork for making initremote be able to provide a UUID.
It should not change any behavior.
Note that it would be nice to make the UUID always be provided to setup,
and make setup not need to generate and return a UUID. What prevented
this simplification is Remote.Git.gitSetup, which needs to reuse the
UUID of the git remote when setting it up, and so has to return that
UUID.
This commit was sponsored by Thom May on Patreon.
... to control the default behavior in all clones of a repository.
This includes a new Configurable data type, so the GitConfig type indicates
which values can be configured this way.
The implementation should be quite efficient; the config log is only read
once, and only when a Configurable value has not already been set by
git-config.
Indeed, it would be nice in the future to extend this, so that git-config
is itself only read on demand. Some commands may not need to look at the
git configuration at all.
This commit was sponsored by Trenton Cronholm on Patreon.
Turns out that Data.List.Utils.split is slow and makes a lot of
allocations. Here's a much simpler single character splitter that behaves
the same (even in wacky corner cases) while running in half the time and
75% the allocations.
As well as being an optimisation, this helps move toward eliminating use of
missingh.
(Data.List.Split.splitOn is nearly as slow as Data.List.Utils.split and
allocates even more.)
I have not benchmarked the effect on git-annex, but would not be surprised
to see some parsing of eg, large streams from git commands run twice as
fast, and possibly in less memory.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Since the user does not know whether it will run su or sudo, indicate
whether the password prompt will be for root or the user's password,
when possible.
I assume that programs like gksu that can prompt for either depending on
system setup will make clear in their prompt what they're asking for.
Building w/o the webapp is not supposed to pull in any AGPLed files.
I appear to have written all the code in these files;
the only commit by anyone else is 64e844e1fe
and is a spelling fix that is not copyrightable.
ghc 8 added backtraces on uncaught errors. This is great, but git-annex was
using error in many places for a error message targeted at the user, in
some known problem case. A backtrace only confuses such a message, so omit it.
Notably, commands like git annex drop that failed due to eg, numcopies,
used to use error, so had a backtrace.
This commit was sponsored by Ethan Aubin.
This makes merging a remote into a freshly created direct mode repository
work the same as it works in indirect mode.
The git-annex branches would get merged in any case by a sync,
since that doesn't use git merge.
This might need to be revisited later to better mirror git's behavior.
I've long considered the XMPP support in git-annex a wart.
It's nice to remove it.
(This also removes the NetMessager, which was only used for XMPP, and the
daemonstatus's desynced list (likewise).)
Existing XMPP remotes should be ignored by git-annex.
This commit was sponsored by Brock Spratlen on Patreon.
Yesod didn't used to do auth checks for that, but this may have changed.
I don't have a way to reproduce the reported problem yet, but this change
certianly won't hurt anything.
This commit was sponsored by Thom May on Patreon.
Note that get --from foo --failed will get things that a previous get --from bar
tried and failed to get, etc. I considered making --failed only retry
transfers from the same remote, but it was easier, and seems more useful,
to not have the same remote requirement.
Noisy due to some refactoring into Types/
Mostly the username is only used for the git committer or other display
purposes, and we can just fall back to a dummy value in these cases.
The only remaining place where an error is thrown is when starting local
pairing, which needs the username to be known.
