Rather than go through the location log to see which files are present on
the remote, it simply looks at the disk contents directly.
I benchmarked this speeding up scanning 834 files, from an annex on my
phone's SSD, from 11.39 seconds to 1.31 seconds. (No files actually moved.)
Also benchmarked 8139 files, from an annex on spinning storage,
speeding up from 103.17 to 13.39 seconds.
Note that benchmarking with an encrypted annex on flash actually showed a
minor slowdown with this optimisation -- from 13.93 to 14.50 seconds. Seems
the overhead of doing the crypto needed to get the filenames to directly
check can be higher than the overhead of looking up data in the location
log. (Which says good things about how well the location log and git have
been optimised!) It *may* make sense to make encrypted local remotes not
have hasKeyCheap set; further benchmarking is called for.
Eventually, git-annex might try running this after making changes to
a remote. I have not yet thought of a good way for it to tell which
remotes it needs to run it on though. It can't just do it when
shutting down a cached ssh connection, because ssh connection caching
is optional, and that would not handle local remotes not accessed over ssh
either.
Now changes are staged into the branch's index, but not committed,
which avoids growing a large journal. And sync and merge always
explicitly commit, ensuring that even when they do nothing else,
they commit the staged changes.
Added a flag file to indicate that the branch's journal contains
uncommitted changes. (Could use git ls-files, but don't want to run
that every time.)
In the future, this ability to have uncommitted changes staged in the
journal might be used on remotes after a series of oneshot commands.
Now gitattributes are looked up, efficiently, in only the places that
really need them, using the same approach used for cat-file.
The old CheckAttr code seemed very fragile, in the way it streamed files
through git check-attr.
I actually found that cad8824852
was still deadlocking with ghc 7.4, at the end of adding a lot of files.
This should fix that problem, and avoid future ones.
The best part is that this removes withAttrFilesInGit and withNumCopies,
which were complicated Seek methods, as well as simplfying the types
for several other Seek methods that had a Backend tupled in.
Can be used to specify what file the url is added to. This can be used to
override the default filename that is used when adding an url, which is
based on the url. Or, when the file already exists, the url is recorded as
another location of the file.
Under ghc 7.4, this seems to be able to handle all filename encodings
again. Including filename encodings that do not match the LANG setting.
I think this will not work with earlier versions of ghc, it uses some ghc
internals.
Turns out that ghc 7.4 has a special filesystem encoding that it uses when
reading/writing filenames (as FilePaths). This encoding is documented
to allow "arbitrary undecodable bytes to be round-tripped through it".
So, to get FilePaths from eg, git ls-files, set the Handle that is reading
from git to use this encoding. Then things basically just work.
However, I have not found a way to make Text read using this encoding.
Text really does assume unicode. So I had to switch back to using String
when reading/writing data to git. Which is a pity, because it's some
percent slower, but at least it works.
Note that stdout and stderr also have to be set to this encoding, or
printing out filenames that contain undecodable bytes causes a crash.
IMHO this is a misfeature in ghc, that the user can pass you a filename,
which you can readFile, etc, but that default, putStr of filename may
cause a crash!
Git.CheckAttr gave me special trouble, because the filenames I got back
from git, after feeding them in, had further encoding breakage.
Rather than try to deal with that, I just zip up the input filenames
with the attributes. Which must be returned in the same order queried
for this to work.
Also of note is an apparent GHC bug I worked around in Git.CheckAttr. It
used to forkProcess and feed git from the child process. Unfortunatly,
after this forkProcess, accessing the `files` variable from the parent
returns []. Not the value that was passed into the function. This screams
of a bad bug, that's clobbering a variable, but for now I just avoid
forkProcess there to work around it. That forkProcess was itself only added
because of a ghc bug, #624389. I've confirmed that the test case for that
bug doesn't reproduce it with ghc 7.4. So that's ok, except for the new ghc
bug I have not isolated and reported. Why does this simple bit of code
magnet the ghc bugs? :)
Also, the symlink touching code is currently broken, when used on utf-8
filenames in a non-utf-8 locale, or probably on any filename containing
undecodable bytes, and I temporarily commented it out.
I had not realized what a memory leak the lazy state monad could be,
although I have not seen much evidence of actual leaking in git-annex.
However, if running git-annex on a great many files, this could matter.
The additional Utility.State.changeState adds even more strictness,
avoiding a problem I saw in github-backup where repeatedly modifying
state built up a huge pile of thunks.
Done by adding a oneshot mode, in which location log changes are written to
the journal, but not committed. Taking advantage of git-annex's existing
ability to recover in this situation.
This is used by git-annex-shell and other places where changes are made to
a remote's location log.
Fscking a remote is now supported. It's done by retrieving
the contents of the specified files from the remote, and checking them,
so can be an expensive operation.
(Several optimisations are possible, to speed it up, of course.. This is
the slow and stupid remote fsck to start with.)
Still, if the remote is a special remote, or a git repository that you
cannot run fsck in locally, it's nice to have the ability to fsck it.
If you have any directory special remotes, now would be a good time to
fsck them, in case you were hit by the data loss bug fixed in the
previous release!
Including the file in the lines behaves better when limiting with --after,
since only files that changed in the time period are shown.
Still not fully happy with the line layout, but putting the +/- first
followed by the date seems a good change.
This needs to run git log on the location log files to get at all past
versions of the file, which tends to be a bit slow.
It would be possible to make a version optimised for showing the location
logs for every key. That would only need to run git log once, so would be
faster, but it would need to process an enormous amount of data, so
would not speed up the individual file case.
In the future it would be nice to support log --format. log --json also
doesn't work right yet.
Made --from and --to command-specific options.
Added generic storage for values of command-specific options,
which allows removing some of the special case fields in AnnexState.
(Also added generic storage for command-specific flags, although there are
not yet any.)
Note that this storage uses a Map, so repeatedly looking up the same value
is slightly more expensive than looking up an AnnexState field. But, the
value can be looked up once in the seek stage, transformed as necessary,
and passed in a closure to the start stage, and this avoids that overhead.
Still, I'm hesitant to use this for things like force or fast flags.
It's probably best to reserve it for flags that are only used by a few
commands, or options like --from and --to that it's important only be
allowed to be used with commands that implement them, to avoid user
confusion.
With --fast, unavailable local remotes are filtered out of the fast set.
This way, if there are local remotes, --fast always acts only on them,
and if none are mounted, acts on nothing. This consistency is better
than --fast acting on different remotes depending on what's mounted.
Some changes to make automated syncing nicer. Merge from both the remote's
$branch and its synced/$branch; either could have new changes. Create
synced/$branch on the remote when pushing.
This optimises away the need to run anything in some common cases.
It's particularly useful on push; no need to push if the tracking branch
we just pulled is the same as the branch we're going to push.
The other uses of it can all be simplified using Git.Ref.base,
Git.Ref.under, and show.
In some cases, describe was being used to shorten the branch name
unnecessarily, and I instead pass the fully qualified name to git.
git-annex normally only runs the branch update once per run, for speed, but
since this fetches new remote git-annex tracking branches, they need to be
merged in after that fetch. An earlier call to Remote.byName was causing
the update to run before the fetch sometimes, but it could have been
anything. Just force the update to happen in the right place.
A crash on parsing was fixed a while ago. This adds support for fully
correctly parsing multiline git config values, using git config --null.
Since git-annex-shell configlist uses normal git config output, I left in
support for that too; the two forms of config output can be easily
identified by the parser. Since configlist only prints the annex.uuid
config, there's no risk of multiline values there, so no need to change it.
Added files don't have to be committed before they can be unannexed.
unannex no longer commits existing staged changes
unannex of the last file in a directory now works, before it failed because
git rm deleted the directory out from under it,
Supporting multiple directory hash types will allow converting to a
different one, without a flag day.
gitAnnexLocation now checks which of the possible locations have a file.
This means more statting of files. Several places currently use
gitAnnexLocation and immediately check if the returned file exists;
those need to be optimised.
The only fully supported thing is to have the main repository on one disk,
and .git/annex on another. Only commands that move data in/out of the annex
will need to copy it across devices.
There is only partial support for putting arbitrary subdirectories of
.git/annex on different devices. For one thing, but this can require more
copies to be done. For example, when .git/annex/tmp is on one device, and
.git/annex/journal on another, every journal write involves a call to
mv(1). Also, there are a few places that make hard links between various
subdirectories of .git/annex with createLink, that are not handled.
In the common case without cross-device, the new moveFile is actually
faster than renameFile, avoiding an unncessary stat to check that a file
(not a directory) is being moved. Of course if a cross-device move is
needed, it is as slow as mv(1) of the data.
It would be nice if command-specific options were supported. The first
difficulty is that which command is being called is not known until after
getopt; but that could be worked around by finding the first non-dashed
parameter. Storing the settings without putting them in the annex monad is
the next difficulty; it could perhaps be handled by making the seek stage
pass applicable settings into the start stage (and from there on to perform
as needed). But that still leaves a problem, what data type to use to
represent the options between getopt and seek?
Left out the backend usage graph for now, and bad/temp directory sizes
are only displayed when present. Also, disk usage is returned as a string
with units, which I can see changing later.
In git, a Ref can be a Sha, or a Branch, or a Tag. I added type aliases for
those. Note that this does not prevent mixing up of eg, refs and branches
at the type level. Since git really doesn't care, except rare cases like
git update-ref, or git tag -d, that seems ok for now.
There's also a tree-ish, but let's just use Ref for it. A given Sha or Ref
may or may not be a tree-ish, depending on the object type, so there seems
no point in trying to represent it at the type level.
semitrusted uuids rarely are listed in trust.log, so a special case
is needed to get a list of them. Take the difference of all known uuids
with non-semitrusted uuids.
More accurately, it was supported already when map uses git-annex-shell,
but not when it does not.
Note that the user name cannot be shell escaped using git-annex's current
approach for shell escaping. I tried and some shells like dash cannot
cd ~'joey'. Rest of directory is still shell escaped, not for security but
in case a directory has a space or other weird character.
git-annex-shell inannex now returns always 0, 1, or 100 (the last when
it's unclear if content is currently in the index due to it currently being
moved or dropped).
(Actual locking code still not yet written.)
The lock will only persist during the perform stage, so the content must
be removed from the annex then, rather than in the cleanup stage.
(No lock is actually taken yet.)
Many functions took the repo as their first parameter. Changing it
consistently to be the last parameter allows doing some useful things with
currying, that reduce boilerplate.
In particular, g <- gitRepo is almost never needed now, instead
use inRepo to run an IO action in the repo, and fromRepo to get
a value from the repo.
This also provides more opportunities to use monadic and applicative
combinators.
Avoid ever using read to parse a non-haskell formatted input string.
show :: Key is arguably still show abuse, but displaying Keys as filenames
is just too useful to give up.
This is my own damn fault for not making UUID a real type, and then relying
on the type checker to ensure my refactoring was correct -- which it wasn't!
I should probably add code to clean up bogus entries in the uuid.log, but
right now I want to get the fix out there to prevent people experiencing
this bug.
I should also make UUID a real data type.
The backend usage graph shows present keys as well as keys found in the
repository tree, so it will also be populated for bare repositories.
Changed wording to "visible annex keys", which explains why it's 0 in
a bare repository (no keys visible as no tree), and also why it varies
depending on which branch is checked out. This seemed better than doing
something expensive to look up keys from the git-annex branch.
Checks location log information, and file contents.
Does not check that numcopies is satisfied, as .gitattributes information
about numcopies is not available in a bare repository. In practice, that
should not be a problem, since fsck is also run in a checkout and will
check numcopies there.
This new approach allows filtering out checks from the default set that are
not appropriate for a command, rather than having to list every check
that is appropriate. It also reduces some boilerplate.
Haskell does not define Eq for functions, so I had to go a long way around
with each check having a unique id. Meh.
This yields a second or so speedup in unused, find, etc. Seems that even
when the ByteString is immediately split and then converted to Strings,
it's faster.
I may try to push ByteStrings out into more of git-annex gradually,
although I suspect most of the time-critical parts are already covered
now, and many of the rest rely on libraries that only support Strings.
Fixed the laziness space leak, so it runs in 60 mb or so again. Slightly
faster due to using Data.Set.difference now, although this also makes it
use slightly more memory.
Also added display of the refs being checked, and made unused --from
also check all refs for things in the remote.
