Let /usr/share/alsa/ucm2/conf.d/simple-card/*.conf be a symlink,
as it is expected since alsa-lib 1.2.7.
Related: d6adde0e32
[ci:skip-build]: already built successfully in CI
Ideally tqftpserv should be started before rmtfs. This is because rmtfs
is currently responsible for starting the modem, and it's best for
performance if all the services needed by the modem are already up.
Also change "want" -> "use" for consistency with rmtfs. The difference
between "want" and "use" is that "want" just triggers starting of the
other service, while "use" also ensures that the other service starts
successfully.
Also include z3ntu's patch fixing a buffer overread issue which sadly
has not been merged for several months now.
rmtfs should be ideally started and stopped before NetworkManager
because otherwise the modem network interface might be removed before
NetworkManager can set it down. This has caused kernel issues at some
point (although it seems to be fine again at the moment).
These options are required by `iwd`. Make use of the `kconfigcheck-iwd`
APKBUILD option to ensure the required config options remain selected.
[ci:skip-build] already built successfully in CI
This enables support for the oneplus3's QCA6174 WiFi chipset. The
`board-2.bin` file (overwriting the file with the same name from the
`linux-firmware-ath10k` package) is created from `bdwlan30.bin`, which
is extracted from the baseband modem firmware disk image,
`NON-HLOS.bin`. This board file has not yet been upstreamed.
Because I don't have access to the serial port yet, I begin with the
vendor kernel.
* Make display work by setting to 16bpp
[ci:skip-build]: already built successfully in CI
Let /usr/share/alsa/ucm2/conf.d/simple-card/*.conf be a symlink,
as it is expected since alsa-lib 1.2.7.
Related: d6adde0e32
[ci:skip-build] already built successfully in CI
ALSA UCM configs are now upstreamed which causes
a conflict with the device package as both are now
providing the same files. Drop our configs in the device package.
The kernel is based on Samsung's downstream kernel for the device. Some
configuration changes are required to make the kernel to work:
* Tizen kernel uses SLP USB gadget, changed to Android USB gadget.
* sprdfb patches and modification on the devicetree files are required
to use the framebuffer.
* Other required pmOS kernel settings were enabled.
* Tizen does not use initramfs, use RAMDISK partition to store initramfs
of pmOS (like heimdall-isorec configuration). As far as I know, no
alternative OS exists for this device so this is the very first usage.
* Flash the root file system to USER, as ROOTFS is < 1 GB in size and
USER is about 2.7 GB.
samsung-kiran: Update device and firmware packages
* Changed kernel configuration for firmware path to follow postmarketOS.
* Post install script to mount CSA partition
CSA partition [1] contains non-volatile data for Tizen devices. As
Samsung Z1 uses this partition to store Wi-Fi and Bluetooth information,
mount this partition to use within postmarketOS.
[1] https://docs.tizen.org/platform/porting/kernel/
linux-samsung-kiran: Use lzop to decompress initramfs
This synchronizes behavior with other heimdall-isorec devices.
[ci:skip-build] Already built successfuly on CI in MR
Add udev rule to make feedbackd handle haptics.
With mesa where A619 is supported (which isn't packaged in pmaports
anyways but it's just one small patch that should go upstream in the
near future) Vulkan works absolutely fine, so install the driver for it.
[ci:skip-build] Already built successfuly on CI in MR
Add flash method fastboot so we can actually flash it with pmbootstrap,
remove outdated 90-android-touch-dev.rules and improve the formatting
throughout the APKBUILD.
[ci:skip-build] already built successfully in CI
Don't try to append the dtb if using the downstream kernel.
Fix for:
ERROR: File not found: /usr/share/dtb/qcom-apq8064-asus-nexus7-flo.dtb
Fixes: MR 2239 ("main/linux-postmarketos-qcom-apq8064: new aport")
[ci:skip-build] already built successfully in CI
This previously caused msm_pm_boot_init to incorrectly get handled as
__init function when it needs to be an __devinit function as it is
called by msm_pm_boot_probe, which is an __devinit function.
[ci:skip-build]: already built successfully in CI
