The upcoming db845c doesn't have cellular modem capabilities, but still
has wifi. Avoid installing modem related configs and services by default
and only install it for devices that need it.
- Add msm8916-1mic configuration for devices without SecondaryMic
- Fix audio volume after upstream msm8916-wcd-digital changes
[ci:skip-build]: already built successfully in CI
harpia's WCNSS firmware has problems with WiFi channels on some device
variants, using osprey's firmware seems to help as a workaround.
Install that by default so WiFi has better chances of working properly
out of the box.
[ci:skip-build]: already built successfully in CI
And use gitlab.com/exynos4-mainline/linux as source so that we no
longer have to carry all the patches in pmaports.
[ci:skip-build]: Already built successfully in CI
As stated in the MRs that added the patch, the ea8061 and s6evr02
panel drivers are originally from work by Simon Shields (fourkbomb).
Let's base our patches on the original commits to preserve authorship,
and note which modifications have been done, and by who. This is a
step towards making these patches ready for submission to upstream.
[ci:skip-build]: Already built successfully in CI
The UART console makes the boot process a whole lot slower due to printk
being synchronous. These devices are well enough supported that we can
disable UART logging by default to improve the boot speed. This
constitutes a ~30 second speedup on the SHIFT6mq at 115200 baud.
linux-postmarketos-omap now supports the Nokia N900 and its OMAP3430 SoC, so
drop this device-specific fork
[ci:skip-build] already built successfully in CI
Remove maintainers who could not be reached to test v22.12. Add exkc as
maintainer for firmware-pine64-rockpro64 as discussed in review of this
patch.
[ci:skip-build]: already built successfully in CI
- upgrade to 6.2.1
- drop musb patch (not needed since linux mainline commit
ffbe2feac59b37c8dc536727552b4f375e1b9aec)
- enable LRU_GEN
[ci:skip-build]: Already built successfully in CI
Kernel configuration addition:
Enabled the newly added Lazy RCU scheduler.
RCU_LAZY can help battery-powered systems like the PinePhone Pro in a few ways:
1. Reduced CPU usage: Because RCU_LAZY allows readers to access shared data structures without acquiring locks or other synchronization primitives,
it reduces the amount of CPU time that is required to manage synchronization. This can be particularly beneficial in battery-powered systems,
where reducing CPU usage can extend battery life.
2. Reduced memory usage: RCU_LAZY delays the creation of multiple versions of the shared data structure until they are actually needed.
This reduces the amount of memory that is required to store these versions.
In battery-powered systems, where memory usage can be a critical resource, this can help to conserve power.
3. Reduced synchronization overhead: RCU_LAZY reduces the overhead of synchronization by delaying the creation of multiple versions of the shared data structure.
This can reduce the amount of time that is spent acquiring and releasing locks or other synchronization primitives,
which can help to conserve power in battery-powered systems.
[ci:skip-build]: already built successfully in CI
Add a driver for the Magnachip EA8061 panel found on some Samsung
Galaxy Note II devices. Split the device trees into two (one for devices
with the already supported S6EVR02 panel and one for the new EA8061
panel).
Note: I didn't write this driver myself. Just like the old S6EVR02
driver, it has been ported from https://github.com/fourkbomb/linux
to the latest mainline Linux version.
The google-dru package provides the linux-postmarketos-rockchip as a
kernel and supports linux-firmware-ath10k linux-firmware-rockchip
packages as additional non-free firmware.
Enable the ATH10K kernel module in the kernel config
config-postmarketos-rockchip.aarch64 to enable wifi on devices such as
the Acer Chrometab 10.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[ci:skip-build]: already built successfully in CI
Add the missing kernel.release file to support packaging and fix builds
with:
`pmbootstrap build --envkernel linux-postmarketos-rockchip`
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Change-Id: Ia140302bb4d309740db85a36374673a6e66c2c2b
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build]: Already built successfully in CI
For a merge list, please see the merge commits:
- 6.1.1 - (5ed7044b05)
- 6.1.2 - (ec165d9c01)
- 6.1.3 - (3735d5032c)
Change-Id: Id46e827a90a9c68cb69d23dc0698a8ea2a5e4336
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build] already built successfully in CI
* lock.sh is specific to Nokia N900, so move to device-nokia-n900
* use tinydm instead of lightdm
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
[ci:skip-build]: already built successfully in CI
The WCNSS firwmare used for motorola-harpia seems to have weird issues
that prevent using WiFi properly except for a few limited channels. It
is not clear why this happens, it seems to be some peculiar firmware
difference (perhaps the channels need to be enabled with some
non-standard command).
Since Motorola uses the same signing keys for all their MSM8916
devices, it is possible to use the firmware from other devices instead.
Initial testing shows promising results when using the older WCNSS
firmware from motorola-osprey instead, it does not seem to have this
issue.
It's not clear yet if this has any negative effects. The WCNSS firmware
should not be device-specific, but theoretically it could be (if
Motorola made some weird changes inside it).
For now just package it in firmware-motorola-osprey-wcnss. This package
can be easily installed on harpia devices for testing (using apk add)
and will then take precendence over the default firmware from the
firmware partition (via msm-firmware-loader).
Move firmware-motorola-osprey from testing to community so that the
package is preserved for motorola-harpia users (testing is deleted in
stable branches).
[ci:skip-build]: already built successfully in CI
Schedutil is a CPU scheduler that is designed to be more efficient than other schedulers, such as the conservative scheduler, in terms of energy consumption.
This is because schedutil uses information about the utilization of individual CPU cores to make more intelligent decisions about when and how to scale the frequency of the CPU.
This can help to reduce the overall power consumption of the device, which can be particularly beneficial for battery-powered devices.
Additionally, schedutil can also help to improve the overall performance of the device by ensuring that the CPU is able to operate at its maximum frequency when needed.
In my personal testing I haven't seen any noticable impact on power consumption, while the performance does certainly noticeably increase
[ci:skip-build]: Already built successfully in CI
* Enable flash/torch LED (CONFIG_LEDS_QCOM_FLASH)
* Fix USB init when not plugged in during bootloader stage
[ci:skip-build] already built successfully in CI
Fix included in this build:
- Patch which sets GPIO pin for stk3311 as input
- ppp: don't reset 'display state of charge' (dsoc) to 0 on vbat low interrupt
[ci:skip-build]: already built successfully in CI
Update the omap kernel to stable 6.1 release. This commit also contains a patch that
fixes broken usb, which should only be needed for versions 5.19 to 6.1 as later
releases will have a proper fix merged.
[ci:skip-build]: already built successfully in CI
CONFIG_USB_GADGET=y
CONFIG_USB_DWC3_DUAL_ROLE=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_DWC2=y
remove un-necessary activated configs
[ci:skip-build]: already built successfully in CI
- Also enabled LRU_GEN by default like on the PinePhone OG
- Set Ext4 module to built-in as this currently is the main fs used for PPP.
Contains the following patch:
- pinephone pro: finished fix for LCD to make it refresh at precisely 60 Hz
[ci:skip-build]: already built successfully in CI
Add the CONFIG_DW9714 symbol to the PinephonePro defconfig.
The PinephonePro rear camera module uses the DW9714 VCM to drive the
lens, and a driver is required to successfully complete the media
graph probe sequence.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
In SDM845, the q6voice kernel driver connects modem and audio backends.
Callaudiod seems to switch to correct audio device and prepares it, however, the audio
device get's closed since no one from the userspace is actively listening to it.
This cuts the audio in call. As a workaround, I have added to script to disable the
suspend-on-idle pulseaudio module during calls, so the audio devices don't close automatically.
Includes the following changes:
- rebase onto rc4
- squash a few changes which were marked to get squashed/fixups
- dropped "wcd934x: use .prepare and .shutdown instead of .trigger"
- OP6 audio device tree changes
- revert of a DSI DCS commit[1], which caused havoc in unprepare
hooks of panel drivers
[1] - https://lore.kernel.org/linux-arm-msm/1892d0af-8aa4-dc03-887a-e44bb623b836@linaro.org/
Change-Id: I4790a278c0d35618ca824a036982769e66767ffd
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Since 00648d0282dcca1da453c0b20d27e24bf901a854, the correct serial console name
is ttySx instead of the older ttyOx. Reflect this in cmdline passed to kernel
via u-boot
[ci:skip-build]: already built successfully in CI
Change-Id: Ice7c2942892eb0a173dcded835d5fac5a8f32066
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build]: already built successfully in CI
Update the ALSA UCM package for the SDM845 so the ALSA UCM configs for
the SHIFT6mq are included. Speaker, microphones, headset work fine in
HiFi mode. In Voice Call mode, the microphone works, but the earpiece is
still silent.
[ci:skip-build]: already built successfully in CI
q6voiced is a daemon to allow voice calls with the q6voice kernel
driver. Add its config so it can open the right audio device on the
SHIFT6mq during a call.
Explicitly set Fn key as Mod5. In xkeyboard-config up to 2.36, this was somehow
set implicitly, since it was working, although I am not sure where/how. In 2.37
it only works when specified.
[ci:skip-build]: already built successfully in CI
Since N900 rtc works fine, remove swclock from boot as it causes time to be set
wrong. Additionally, rtc device is set correctly in kernel, so remove old,
adjusted hwclock config.
Partially reverts pmaports 0e502a5139
[ci:skip-build]: already built successfully in CI
Venji10 is no longer involved in actively maintaining the package for more than a year plus.
Changing myself to be the maintainer and also updated my email id.
[ci:skip-build]: already built successfully in CI
Because of recent changes to kernel and alsa-ucm-conf,
the q6voiced device is changed.
Venji10 is no longer involved in actively maintaining the package for more than a year plus.
Changing myself to be the maintainer and also updated my email id.
Rebased our work on top of latest upstram alsa-ucm-conf.
The beryllium ucm conf is also reworked to fix wrong default audio device issue
and now headphones auto-switching on plugin also works as expected.
Adding myself as a co-maintainer for this package.
Change-Id: I360c60d1675c884c9e85cd95f940fa6cb4b75e83
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Change-Id: I986b3401fd81ac18b7336f8f0be53e2cf4c4515c
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
After c49180f8cf, usbnet did not come up on N900
automatically since the UDC probed a little late. Fix this by making the driver
built-in.
While at it, make watchdog built-in so it can be kicked even when boot takes
long for any reason.
[ci:skip-build]: already built successfully in CI
These are the patches added to mitigate the CVE's which have been found in wifi stack.
More information on these CVE's can be found over here: https://seclists.org/oss-sec/2022/q4/20
[ci:skip-build]: Already built successfully in CI
- Downgrade kernel from EOL 5.18 to LTS 5.15 in order to apply WiFi CVE fixes.
It is currently not possible to upgrade to newer (5.19+) kernels due to a USB
regression.
- Modify 0005-iio-accel-st-accel-add-lis302dl.patch so it applies on 5.15.74
- Reinstate 0008-wl1251-specify-max.-IE-length.patch for nl80211 support. Patch
was dropped because it is in mainline since 5.18
[ci:skip-vercheck]: downgrade
[ci:skip-build]: already built successfully in CI
For a merge list, please see the merge commits:
- 5.19.13 - (6384fddb50)
- 5.19.14 - (85caddc9c8)
- 5.19.15 - (fca27cdc51)
- 5.19.16 - (9aa25bf492)
Note: This is an important release, as 5.19.16 fixes the recently
published wifi stack vulnerabilities.
Change-Id: Iffff2c65bdd697b01bc5d8fc090e9a2f2577c701
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
This kernel upgrade comprises of 2 point releases 6.0.1 and 6.0.2.
the release from 6.0 to 6.0.2 is a regular maintenance release.
Kernel update 6.0.2 addresses 5 important CVE's in the Wifi stack.
More info can be found over here: https://seclists.org/oss-sec/2022/q4/20
[ci:skip-build]: already built successfully in CI
- Update to Linux v6.0.2 (includes fixes for WiFi CVEs)
- Tweak kernel configuration slightly (especially crypto options)
[ci:skip-build] Already built successfuly on CI in MR
- Update to Linux v6.0.1
- Upstreamed some patches this time
- Fixed register address in smb1360 driver
Device changes:
- samsung-gtelwifiue
- Audio
- Better USB detection
- samsung-e5/e7/grandmax
- Refactoring for changes that landed upstream
- Key LED control
New devices:
- samsung-cprime/heatqlte
- eMMC, SD card, USB, Buttons, WiFi/BT, Vibrator
- Display, Brightness control (not for AMOLED on heatqlte)
- Sensors (Accelerometer)
- Sound/Modem
- Battery status
- NFC
- NOTE: No touchscreen yet
Our patch needs to be adjusted after commit 58e4a2d27d32 ("extcon: Fix
extcon_get_extcon_dev() error handling"). Also generate all other
patch headers, and make it possible to apply patch 0008 and 0009 with
git am.
The qbootctl service tells the bootloader that the current boot has
succeeded, so that the bootloader doesn't switch to the other slot after
~7 tries.
The swclock-offset dependency ensures that the time is set correctly
after a reboot, caused by the read-only RTC on Qualcomm.
[ci:skip-build]: already built successfully in CI
Linux 5.18 brought better support for some x86-based Android tablets,
thanks to work from Hans de Goede. This includes asus-me176c: the
modified ACPI table and the Linux fork is no longer necessary,
it can just run linux-edge from Alpine.
Drop the old Linux 5.4 fork and related packages. Instead of using
the proprietary sound firmware from linux-firmware-intel, switch to
using the open-source(!) "Sound Open Firmware" (SOF).
NOTE: The mainline battery driver seems quite a bit less accurate
than the ugly old driver ported from the downstream driver. Also,
Bluetooth seems to fail on some boots now. Overall it works quite
well though. :)
For a merge list, please see the merge commits:
- 5.19.8 - (30c780c930)
- 5.19.9 - (203e94fc47)
- 5.19.10 - (a88cf36006)
- 5.19.11 - (ade68530f5)
- 5.19.12 - (c19a1c06f1)
Change-Id: Ic6b7f59f326516db392c6281d2cee139a9b92794
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build] Already built successfuly on CI in MR
The SHIFT6mq (axolotl) now supports updating the bootloader via
the new android-boot fwupd plugin.
A big shoutout and heartfelt "Thank You!" to Dylan for working
on this plugin and upstreaming it.
Change-Id: I1d608ce293a152e9354ca117cd370952df3f41ad
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Replace usages of pmb:kconfigcheck-* options with
pmb:kconfigcheck-community which will be required for all devices in
community/main category. This ensures more consistent features &
behavior across devices.
Switch to minimal config that I've been using for development for the
last months, with some minor modifications. In addition to that enable
all the kconfig options that will be a part of the new
pmb:kconfigcheck-community (anbox/waydroid + iwd + nftables + containers
+ zram + netboot).
Note by ollieparanoid:
Re-applied it after I just reverted it. Now realized that I didn't need
to revert this in the first place, this is and aarch64 package and the
cross compilers (x86_64 packages) needed to be published. Anyway, the
gcc mess is mostly resolved now, see issue 2167.
[ci:skip-build] Already built successfuly on CI in MR
Temporarily revert this, so bpo can first build and publish all gcc
cross packages. The build for this linux package currently failed - I
could also set it back to queued and have it build, but that would delay
the publish of the gcc-aarch64 package until the kernel is built.
This reverts commit 979cc0bfb6.
Switch to minimal config that I've been using for development for the
last months, with some minor modifications. In addition to that enable
all the kconfig options that will be a part of the new
pmb:kconfigcheck-community (anbox/waydroid + iwd + nftables + containers
+ zram + netboot).
[ci:skip-build] Already built successfuly on CI in MR
Remove as we are removing apparmor check from pmbootstrap
[ci:skip-vercheck] No rebuild necessary
[ci:skip-build]: already built successfully / also not really needed
ODROID HC2 is based upon the Samsung Exynos 5422 and can run full
mainline. Switch to linux-edge from Alpine to enable this and drop
the close-to-mainline fork for this device. The close-to-mainline
fork was already linux-edge for a while but with a separate KConfig.
These KConfig changes are now integrated in linux-edge of Alpine.
U-boot script was updated to handle vmlinuz-edge as well since
Alpine's linux-edge does not generate a vmlinuz file, but vmlinuz-edge.
Probably to allow installing linux-lts as well.
initcall_blacklist=exynos_drm_init was added to the kernel cmdline
because upstream wants to set CONFIG_DRM_EXYNOS=y instead of module.
The DRM subsystem of Exynos5 in the kernel seems to be broken for this
device. There's also no use for it since this device does not have video
out. See https://gitlab.alpinelinux.org/alpine/aports/-/merge_requests/38094
Disable HDMI as workaround, as it seems to be buggy when HDMI is
unplugged. It's apparently in DRM_MODE_CONNECTED state, but without size
and with no modes. According to Guido from Phosh this is a bug and
should be fixed in the kernel. By disabling this until it is fixed, we
get Phosh working again.
Related: https://gitlab.gnome.org/World/Phosh/phosh/-/issues/828
The device fulfils the requirements for community category, and I plan
to maintain and develop this device further going forward. Move it!
[ci:skip-vercheck]: linux pkg was moved
[ci:skip-build]: already built successfully in CI
SDM845 devices running mainline lack a valid MAC address, and
fallback to a random one on each boot. This makes DHCP IPs vary
on each boot and breaks Bluetooth BNEP mode since the kernel enforces
that a valid MAC address is used when Bluetooth BNEP mode is activated.
Add a udev rule to trigger a script when the WLAN or Bluetooth interface
appear to set the MAC address by reading it from the persist partition
for the WLAN MAC address and increment it for generating a Bluetooth MAC
address. This approach seems to be common on some downstream devices
such as the Oneplus 6.
[ci:skip-build]: already built successfully in CI
Squash of
- linux-postmarketos-qcom-sdm845: enable LED_TRIGGER_PATTERN as builtin
- linux-postmarketos-qcom-sdm845: switch BT_RFCOMM to module
- linux-postmarketos-qcom-sdm845: switch BT_BNEP to module
LED_TRIGGER_PATTERN is necessary for feedbackd to function correctly.
However, it doesn't get enabled by default when build as module,
build as built-in to avoid this problem so the notification LED
blinks correctly. This works around the problem that LED_TRIGGER_PATTERN
is not probed automatically when the Qualcomm LPG driver is used for SDM845 devices. See https://gitlab.com/sdm845-mainline/linux/-/merge_requests/34
CONFIG_BT_RFCOMM should always be build as a module otherwise it may never
be initialized at boot. Without this module, BlueZ will not enable
profiles depending on RFCOMM such as HFP. RFCOMM support as builtin may
work if the Bluetooth driver is builtin (which is not the case here), but I haven't verified that. See https://gitlab.com/sdm845-mainline/linux/-/merge_requests/38
CONFIG_BT_BNEP should always be build as a module otherwise it may never
be initialized at boot. Without this module, BlueZ will not start up its
networking plugin to provide Bluetooth PAN support. BNEP support as
builtin may work if the Bluetooth driver is builtin (which is not the case here), but I haven't verified that. See https://gitlab.com/sdm845-mainline/linux/-/merge_requests/38
[ci:skip-build]
Enable:
* CONFIG_UINPUT required by fbkeyboard
* CONFIG_PSTORE_PMSG required to enable dmesg/console ramoops
Co-Authored-By: Oliver Smith <ollieparanoid@postmarketos.org>
[ci:skip-build]: already built successfully in CI
UPower defaults to HybridSleep mode when battery is critical.
Since we allow suspending the device in regular use, this approach
won't help in a critical battery case scenario. When the battery
level is critical, shutdown the device instead.
Moreover, adjust the default levels for battery low, critical, critical
action since they are too high for SDM845 devices.
vc4 and freedreno have been provided by mesa-dri-gallium for a long
time.
mesa-dri-intel subpackage has been deprecated for a while (previously
dependend on dri-classic and dri-gallium)
mesa-dri-classic drivers is removed because mesa upstream has removed
those old drivers from the tree. They've been replaced (for not-ancient
hardware) by gallium.
See also https://gitlab.alpinelinux.org/alpine/aports/-/merge_requests/31848
Let /usr/share/alsa/ucm2/conf.d/simple-card/*.conf be a symlink,
as it is expected since alsa-lib 1.2.7.
Related: d6adde0e32
[ci:skip-build]: already built successfully in CI
These options are required by `iwd`. Make use of the `kconfigcheck-iwd`
APKBUILD option to ensure the required config options remain selected.
[ci:skip-build] already built successfully in CI
ALSA UCM configs are now upstreamed which causes
a conflict with the device package as both are now
providing the same files. Drop our configs in the device package.
For a merge list, please see the merge commits:
- 5.18.1 - (3d98cf52b5)
- 5.18.2 - (99cf0d285f)
- 5.18.3 - (b425b70a63)
-----
This also changes the following Kconfig options:
- CONFIG_SCSI_UFS_BSG -> y
Change-Id: I4406f381b48a894ea0bff3006fb3fa62683e61a0
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build]: already built successfully in CI
Run "pmbootstrap kconfig migrate asus-me176c" to update the kernel
config for the new Linux version. Otherwise there is an interactive
prompt that times out on BPO (although it succeeds on GitLab CI for
some strange reason).
Add subpackages that automatically cause installation of the Vulkan
and libva driver if packages using them get installed. This reduces
the size of a minimal rootfs but still ensures those are present if
needed.
[ci:skip-build]: already built successfully in CI
The new linux-edge / 5.18 kernel will likely not make it in time for
the v22.06 release so let's upgrade the good old 5.4 kernel to the
latest stable release at least.
File system modules are included by default in postmarketos-mkinitfs
and loaded dynamically when needed.
[ci:skip-build]: already built successfully in CI
- Update to Linux 5.18
- Fix Bluetooth startup problem
- Upstreamed not so many patches this time
- Even more things I forgot than usual...
pmOS kernel config:
- Enable BNEP, RFCOMM for extra BT features
Device changes:
- samsung-j3ltetw/j5/j5x:
- Now covered by a common device tree include
- Add proper display driver (no brightness control yet)
- Hall sensor (except j3ltetw)
- Touchscreen (only j3ltetw and j5x, j5 is still WIP)
- Sound/Modem for all of them
New devices:
- samsung-grandmax (Samsung Galaxy Grand Max)
- eMMC, SD card, USB, Buttons, WiFi/BT, Vibrator
- Display
- Touchscreen
- Sensors (Accelerometer)
- Sound/Modem
- Battery status
[ci:skip-build]: already built successfully in CI
Drop the weston config, as it was for fbdev which has not been supported
in weston anymore for a while.
Remove Martijn as Co-Maintainer, as both previous maintainers of the
Nokia N900 stopped maintaining it when the device was briefly dropped
from community.
Co-Authored-By: Oliver Smith <ollieparanoid@postamrketos.org>
[ci:skip-build]: already built successfully in CI
Drop 0002-ARM-dts-n900-remove-rx51-battery.patch, because this wasn't
needed for postmarketOS in the first place. The patch was created for
Maemo Leste as upower quirk initially and they don't carry it anymore
either.
Drop other patches, as they have been upstreamed.
Co-Authored-By: Oliver Smith <ollieparanoid@postmarketos.org>
Dropped the usb-c patches, because it looks like usb-c charging works
now out of the box on 5.18, and that was the primary reason for me to
include those patches here originally.
[ci:skip-build] already built successfully in CI
While the newer "Linux board support package" has newer versions for
the "modem" and "venus" firmware, the "wcnss" firmware is actually
older than the one in the previous 1034.2.1 release. To avoid
downgrading it, it is still packaged from the old release in a separate
APKBUILD. (It is probably also better tested than the new release...)
[ci:skip-vercheck]: non-zero pkgrel is intended to match old package
[ci:skip-build] already built successfully in CI
- Patch from Robert Nelson and Hansem Ro.
- Based on the work of Hansem Ro,
who owns another device, the First Generation Kindle Fire,
which has similar specifications as the Samsung Galaxy Tab 2 7.0.
mesa-dri-swrast no longer exists and just installs,
mesa-dri-gallium. However, this might not always be the case, so
let's change it before it causes any issues.
[ci:ignore-count]
[ci:skip-build]
It seems like at least samsung-a5 needs the same "facility lock"
workaround as samsung-serranove, otherwise ModemManager can not detect
the SIM card correctly. Move it to a subpackage of soc-qcom-msm8916
and apply it to samsung-a3 as well just to be sure.
So far this issue seems limited to Samsung devices, at least bq-paella
is not affected (tested with the same SIM card), so it does not seem
right to apply it unconditionally to all devices.
[ci:skip-build] Already built successfuly on CI in MR
- Add support for sdm845-samsung-starqltechn
- Fix touch for axolotl
Change-Id: Ie7073f450f207e9242b821b4971ce2be89ba6a54
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build] Already built successfuly on CI in MR
- alcatel-idol347: add headphones
- Try to revert playback/capture priorities to maybe make automatic
switching to headphones based on jack detection work a bit better.
[ci:skip-build] Already built successfuly on CI in MR
