Allow this package to be used on systemd installs without pulling in a
bunch of openrc services.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Co-authored-by: Clayton Craft <clayton@craftyguy.net>
Not sure if dropping the networkmanager-openrc dependency causes issues.
Otherwise, make the elogind subpackage conflict with systemd-logind.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
He did an awesome job adding an initial port for this device but hasn't
helped to maintain it, so I'm removing him from the list of active maintainers.
For installing openrc-specific dependencies, specifically
nftables-openrc which is needed because the post-install enables the
openrc service and expects the initd script to be available then
[ci:skip-build] already built successfully in CI
And add it to pmb_recommends. This way new installations with
pmb_recommends will force install the correct version.
[ci:skip-build]: already built successfully in CI
And remove the compatibility symlinks again, all kernels running now
should use the .mbn files already.
[ci:skip-build]: already built successfully in CI
which are probably too experimental to ask Alpine to carry them, while being
very helpful for devices that pmOS targets. The explicit goal is to help
Libcamera development and drop the fork again.
For the dma heaps permissions see the ongoing debate in
https://lore.kernel.org/all/bb372250-e8b8-4458-bc99-dd8365b06991@redhat.com/
It's possible that Libcamera will switch to another solution in a future
release or that memory accounting issues around dma heaps will need to
get fixed in the kernel before the permissions can be set by default by
distros.
Regarding `libcamera: simple:` patches:
- 0001-0003 can likely be dropped once the Libcamera SoftISP gains
support for raw (bayer) streams passthrough (on top of converting to
RGB or YUV formats).
- 0004 will likely be needed until Megi downstream patches for the
Pinephone get improved/upstreamed and Libcamera adopted accordingly.
With these patches libcamera and pipewire based applications should work
on the Librem5, Pinephone and - hopefully soon - devices like the OP6.
See https://gitlab.com/postmarketOS/pmaports/-/merge_requests/5162 for
more context.
[ci:skip-build]: already built successfully in CI
All these config update are there since 2021. Having them there
serves no purpose, apart from increasing packaging complexity and
have some unnecessary files under /etc
All these config update are there since 2020. Having them there
serves no purpose, apart from increasing packaging complexity and
have some unnecessary files under /etc
> User 'clamor95' was moved to 'clamor-s'. Please update any links and
> bookmarks that may still have the old path.
[ci:skip-build]: already built successfully in CI
Copied from qemu-amd64. Enabling support for EFI boot allows me/others
to easily test pmOS EFI boot loader and config changes. Legacy BIOS boot
will still work, see 22c602096 for details.
[ci:skip-build]: already built successfully in CI
These appear to be client demos, and are already in _pmb_recommends;
drop them from depends to avoid duplication.
[ci:skip-build]: already built successfully in CI
- 0003-dts-pinetab-add-missing-bma223-ohci1.patch
The original patch added a node for BMA223 and a node for ohci1.
The former is already present in upstream, so the new patch
0003-dts-pinetab-add-missing-ohci1.patch only adds the latter.
- 0004-arm64-dts-allwinner-Add-bluetooth-node-to-the-PineTa.patch
The patch is now present in upstream so it has been removed.
However it's worth noting that upstream's node has the wake GPIOs
reversed from the original patch. The original patch added:
device-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
host-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
... while upstream has:
device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
This has not been tested on a PineTab.
- 0005-dts-pinetab-make-audio-routing-consistent-with-pinep.patch
The first hunk of the patch is in upstream and has been removed.
- 0013-Revert-usb-quirks-Add-USB_QUIRK_RESET-for-Quectel-EG25G-Modem.patch
This patch reverted upstream commit that was present until v6.7
( f9e3e7ea4e )
but is not present in v6.8+, so the patch has been removed.
- 0014-usb-serial-option-add-reset-resume-callback-for-WWAN.patch
The patch is now present in upstream so it has been removed.
- 0016-Define-orientation-and-rotation-for-PinePhone-camera.patch
The patch is now present in upstream so it has been removed.
---
The issues found with the previous upgrade to 6.8.4
( 646e0b50df ), ie reliably receiving calls
in suspend ( #2734 ) and the headset / headphones detection being broken
because of the jack detection changes ( #2738 ) have been fixed.
[ci:skip-build]: already built successfully in CI
Adjust the sensor firmware paths for hexagonrpcd 0.3.1.
Also drop board-2.bin file which is now upstream and use upstream mba.mbn
and wlanmdsp.mbn.
[ci:skip-build]: already built successfully in CI
This causes a lot of spam in dmesg about "failed to allocate compressor transform", making it nearly impossible to search anything in the system logs.
This option has nothing to do with zram.
[ci:skip-build]: already built successfully in CI
kodi x86 support was dropped upstream, see aports f53343613a4
[ci:skip-build]: already built successfully in CI
[ci:skip-vercheck]: Only changing architectures, no changes to package.
Contains fix for Poco F1 display issue when booting and enables sensor
support for Poco F1.
[ci:ignore-count]
[ci:skip-build]: already built successfully in CI
