I thought only having specific symlinks was enough, and it was for one
kernel. However, to make sure it works with all kernels, let's just add
symlinks for all the binutils.
* remove everything that causes conflicts when installing gcc6 and
gcc6-armhf side by side
* fix up the existing "if cross compiling" code path to use the
/usr/gcc6 prefix
* link binutils binaries to the locations they are expected to be
by gcc (this took me hours to figure out....) as well as by the
linux build system with CROSS_COMPILE
* link all gcc binaries to /usr/bin/gcc6-*
Based on the last version from Alpine, but installed to /usr/gcc6 and
with pretty much everything disabled except for the C compiler.
We can probably throw out a lot of patches, and make the APKBUILD much
smaller. But let's focus on making it possible to compile old kernels
again first. There's still a lot to do for that, see #103.
* Added linux-postmarketos-allwinner kernel
* Added copy of alpines u-boot package with pine-a64lts support
* Changed postmarketos-mkinitfs to add the plain .dtb file to the boot partition
Weston does not build for x86, because it depends on libunwind. And
libunwind is not available in Alpine for x86. I've also tried to
simply enable x86 in libunwind, but it does not build out of the box.
In order to start building again for x86 at all, let's disable weston
and all packages that depend on it on for now.
When cross compiling, the kernel scripts would be in the native arch
again. That was already fixed in !1234, however the mime type of the
binaries has changed, so we couldn't detect them properly anymore
(#1659).
This commit fixes it again, and also adds a checks so this won't
silently fail in the future.
[skip ci] because this would not run through anyway (building these
packages takes too long). Fixes#1659.
Follow-up to !1373, where `pmbootstrap flasher flash_system` was
replaced with `pmbootstrap flasher flash_rootfs`. We still had used
terms like "system partition" in a lot of places.
This commit replaces it everywhere, so it's clear that we're talking
about the pmOS rootfs (which may or may not be installed to Android's
system partition).
* Travis and Coveralls badges
* aports: instead of <https://github.com/postmarketOS>, use
<https://postmarketos.org>
* References to full URLs to issues and pull requests replaced with
a hash and the number
* grsec check: simplify error message, remove link to github issue
(nobody is using that anymore anyway)
While this feature is nifty, it doesn't really work with most mobile
wireless drivers. Wireless drivers decide to go in "weird" state when
the mac address changes at runtime.
I remember talking to someone in IRC about this and getting it disabled.
not sure how this ended up here.
See: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1681513
This option is not working with most of the wireless drivers normally.
For example e.g it doesn't really play nice with one of my laptop's
wireless driver.
Alpine ships `mkbootimg` with the `android-tools` package now. This
conflicts with the `mkbootimg` fork from osm0sis (see #441).
Changes:
* Rename `mkbootimg` to `mkbootimg-osm0sis` (aport and binary name)
* `mkbootimg-osm0sis`: provides `mkbootimg` now (so we don't need to
change all the device aports), update version to 2018.05.10
* Adjust our `mkinitfs` script to call `mkbootimg-osm0sis`
* Better aport description
* pkgrel_bump testcase: don't fail on deleted aport
* change "pmbootstrap kconfig_check" to "pmbootstrap kconfig check"
* change "pmbootstrap menuconfig" to "pmbootstrap kconfig edit [-x|-g]"
(with legacy alias, because the first syntax was referenced to a lot)
* enable X11 interfaces: -x: xconfig, -g: gconfig
* new function to copy the xauthority file:
pmb.chroot.other.copy_xauthority()
* remove menufconfig() function from the kernel template and all kernel
aports ([skip ci] because it would rebuild all kernels and run out of
time). Alpine has dropped this as well, and it wouldn't work with the
new code anyway.
Plasma Mobile uses the telepathy-ofono through telepathy,
telepathy-ofono was developed by canonical for ubuntu touch and it is
also used by dialer-app of ubports.
telepathy-ofono is alternative to telepathy-ring.
This is basically too old stuff from meego times, and is added only
because telepathy-ofono needs it for now, I will talk with ubports
people to get telepathy-ofono ported to libqofono so we can dump this 6
year old unmaintained library.
(patches to make it build with qt5 and modern compiler are taken from
ubuntu packaging)
This was done for testing locally and is not needed for any
functionality, it managed to slip into the initial qcom kernel package,
but it is not needed.
Upstream suggests to keep remoteproc drivers as modules given they
require the firmware files to be present when they are probed, instead
of putting required firmware files in initramfs due to size
restrictions. We make these drivers modules and load them from
userspace.
Changes:
* device-samsung-klte with both downstream and mainline kernel
subpackages
* linux-postmarketos-qcom updated to last commit
What works in mainline kernel:
* internal SD card
* volume and home key buttons
* usb network
This makes weston build again on x86_64. (It still won't build for
armhf and aarch64, because Alpine's mesa binary package is currently
stuck there, I'll look into that as well.) Detailed fixes:
1. New makedepends needed, because mesa-libwayland-egl does not exist
anymore (see Alpine's aports commits 257a236 and 4f8b36b):
wayland-libs-egl wayland-dev
This fixes configure errors:
checking for EGL_TESTS... no
configure: error: Package requirements (egl glesv2 wayland-client wayland-egl) were not met:
Package 'wayland-client', required by 'virtual:world', not found
Package 'wayland-egl', required by 'virtual:world', not found
2. Disable RDP backend, because Weston source is incompatible with
freerdp 2.0.0. This avoids compilation errors like this one:
libweston/compositor-rdp.c:193:5: error: 'SURFACE_BITS_COMMAND {aka struct _SURFACE_BITS_COMMAND}' has no member named 'bpp';
* linux-postmarketos-qcom: Remove composite USB gadget
* linux-postmarketos-qcom: Fix usb networking
- Enable functionfs so we're able to actually configure the USB
networking
- Enable the USB serial console for convenience, although not enabled by
default pre-composed configuration
Moved from aports/main to aports/luna, so we can disable the entire
folder from building in the binary repository:
* qt5-qtwebengine
* postmarketos-ui-luna
The `msm-fb-refresher` updates the screen for msm based devices. It is
not needed for all devices, so we had some extra code in the initramfs,
that would only add it when the `deviceinfo_msm_refresher` variable was
set. However, we are able now to add files to initramfs hooks, so this
hack can be removed and simplify everything.
Changes:
* Remove `deviceinfo_msm_refresher` from all deviceinfos
* Add sanity check for it
* Move all `deviceinfo` sanity checks to an extra function
* `postmarketos-mkinitfs`: remove code for msm refresher
* `msm-fb-refresher`: add initramfs hook
The postmarketos-base package used to make the user part of the "video"
and "audio" groups. However, this did not work reliably, and we were
adding the "wheel" group in "pmbootstrap install" anyway.
Now all groups get added in "pmbootstrap install", and the names of the
groups have been moved to `pmb.config.install_user_groups`.
This package is currently broken in Alpine's binary packages for
the testing repository, and their build bot is stuck with another
package. In turn, this makes our package building for the repo get
stuck, as we can't build device-nokia-n900 (and it stops there).
See also: #1408
* As discussed in IRC/matrix, we're removing `linux-postmarketos-lts`
for now. The kernel isn't used right now, and we save lots of
maintenance effort with not updating it every week or so.
* new config option `"kernel"` with possible values:
`"downstream", "mainline", "stable"` (downstream is always
`linux-$devicename`)
* ask for the kernel during `pmbootstrap init` if the device package
has kernel subpackages and install it in `_install.py`
* postmarketos-mkinitfs: display note instead of exit with error when
the `deviceinfo_dtb` file is missing (because we expect it to be
missing for downstream kernels)
* device-sony-amami:
* add kernel subpackages for downstream, mainline
* set `deviceinfo_dtb`
* device-qemu-amd64: add kernel subpackages for stable, lts, mainline
* test cases and test data for new functions
* test case that checks all aports for right usage of the feature:
* don't mix specifying kernels in depends *and* subpackages
* 1 kernel in depends is maximum
* kernel subpackages must have a valid name
* Test if devices packages reference at least one kernel
* Remove `_build_device_depends_note()` which informs the user that
`--ignore-depends` can be used with device packages to avoid building
the kernel. The idea was to make the transition easier after a change
we did months ago, and now the kernel doesn't always get built before
building the device package so it's not relevant anymore.
* pmb/chroot/other.py:
* Add autoinstall=True to kernel_flavors_installed(). When the flag
is set, the function makes sure that at least one kernel for the
device is installed.
* Remove kernel_flavor_autodetect() function, wherever it was used,
it has been replaced with kernel_flavors_installed()[0].
* pmb.helpers.frontend.py: remove code to install at least one kernel,
kernel_flavors_installed() takes care of that now.
This environnment variables provides better integration and themeing to
various components and is inline with what reference Plasma Mobile
images is doing
Signed-off-by: Bhushan Shah <bhush94@gmail.com>
* Qualcomm MSM modem: 'rmtfs' support packages
* qcom_rmtfs: Server that talks to modem over IPC to allow it
read/write data for its persistent storage. This is needed for it to
boot, as well as periodically during usage. Added a patch that
it expects the storage path symlinks in /etc instead of /boot.
* qrtr: IPC library for rmtfs
* libqipcrtr4msmipc: adapter library to make qrtr work on kernels with
AF_MSM_IPC support. AF_QIPCRTR is the mainline equivalent since Linux
~4.7.
* msmipc-dev: Header files for qrtr and libqipcrtr4msmipc.
Thanks to Bjorn Andersson <https://github.com/andersson> for rmtfs and
qrtr.
* libsmdpkt_wrapper: adapter lib for QMI clients
The SMD serial packet driver in Qualcomm kernels has, AFAICT, a bug
in poll(); this works around it so that qmicli et al can work.
* i9195: firmware (modem only right now)
* add ofono (with patch for MSM devices)
Based on Alpine's package.
* i9195: add modem support
* move all modem related packages to aports/modem
* Add charging-sdl package
* Include charging-sdl into the initramfs-extra
* [initramfs] Detect charging mode and use triggerhappy to start
charging-sdl when the power key is pressed
Since it works for linux-postmarketos-stable, I've simply copied over
the config, and ran "pmbootstrap menuconfig" on it again. Then it
worked again in Qemu.
* Add NetworkManager and PulseAudio applets to Plasma
* This crashes plasma mobile on armhf (where it is not usable due
to performance problems anyway), except on mainlined kernels
with hardware accelerated graphics. This is mentioned in the
pkgdesc of postmarketos-ui-plasma-mobile now.
When building device packages, the postmarketos-mkinitfs package gets
installed as dependency of postmarketos-base. It must not try to
create an initramfs at this point, when there is not deviceinfo file.
We build the initramfs during the installation, so it's fine.
Added [skip ci] because linux kernels and KDE updates are currently
getting built for the binary repository (so Travis couldn't finish
anyway).
* device-*: add postmarketos-base to depends
* aportgen: add postmarketos-base to depends
* Add test case
* postmarketos-base: Don't depend on devicepkg
* msm-fb-refresher: Enable service in post-install
* gp-peak: Add support for osk-sdl
* gp-peak: Move non-kernel files to device-gp-peak
* gp-peak: Add audio support
Manually trigger the udev rules for audio devices and add the default user to the audio group
* Added a ui package for i3wm
* Added n900 specific i3wm config
* Fixed mixed tabs and spaces in i3status.
This is also the first commit made on an n900
running postmarketOS.
* Removed redundant X11
* Use lock.sh to lock the device
* Windows management improvements
* bump pkgver
* Fix device-nokia-n900 checksums
* Fixed path in the i3wm split package
* New "pmbootstrap build --src=/local/source/path hello-world" syntax
* The local source path gets mounted inside the chroot
* From there, a copy of the source code gets created with rsync (so
we can write into the source folder if necessary, for better
compatibility with all kinds of APKBUILDs)
* After the aport gets copied into the chroot before building (as
usually), we extend the APKBUILD with overrides to make it use
mountpoint's source instead of downloading the package's source
from the web as usually
* The package built with the local source gets _pYYYYMMDDHHMMSS
appended to the pkgver
* linux-postmarketos-mainline: use $builddir, fix patch checksum
Binary packages are rebuilding. If your kernel is not rebuilt yet, and
you don't want to build it yourself, just checkout the previous
pmbootstrap commit.
This commit also changes the arch from the postmarketOS kernels from
"all" to the ones where we actually have a kernel config.
Fixes#1229.
We have two methods of cross-compiling:
* native: everything runs with the host architecture, QEMU is not
involved. This is the fastest, but requires the build system to be
working with it. We use this for all linux-* packages currently.
* distcc: everything runs through QEMU emulating the target arch,
*except* for the compiler. This is the most compatible approach
working with all packages.
When compiling `linux-*` packages natively, kernel scripts needed
during the build process get generated. Some of these are C files that
get compiled as executables. In native mode, these get compied to the
native architecture, in distcc mode to the target architecture.
The problem is, that we need these scripts compiled for the target
architecture in the kernel's dev package in order to compile kernel
modules outside of the kernel's package (e.g. wireguard).
It is not possible to just rewrite this logic to generate target-arch
binaries when running in native mode, because these binaries require
musl-dev, linux-headers and some other packages to be installed for the
target architecture inside the native chroot.
We solve this by introducing a new `kernel-scripts` package. which
contains just the binary scripts. In case the dev package was
cross-compiled, it depends on `kernel-scripts` and symlinks these
binaries. The `kernel-scripts` package always gets compiled in distcc
mode since it does not have a `linux-` prefix.
Fixes#1230.
Fixes#1227.
This also updates the hash in linux-postmarketos-mainline, because the
hash changed upstream (they updated their git version server-side?).
Closes#441. Adjust bootimg_analyze code:
* Install mkbootimg (which now provides unpackbootimg) instead of
unpackbootimg. In theory, pmbootstrap should recognize this
automatically, however right now it does not yet handle this case.
* The file names of the extracted files have changed.
* Automatically generate a calibration matrix for libinput
This takes the calibration matrix for wayland and divides the pixel
offsets by the device width/height.
* Bump pkgrels of devices using devicepkg-dev
This causes new packages to be generated, using the new devicepkg-dev
version.
* Testsuite: Run UIs in Qemu and check running processes (and other changes)
* When `pmbootstrap qemu` gets killed, it now takes down the Qemu process with it
* `test/check_checksums.py` got a new optional `--build` parameter, which makes
it build all changed packages instead of just checking the checksums
* We run this before running the testsuite now, so all changed packages get
built before running tests (otherwise tests would hang without any output
while a changed package is building)
* New testcase, that zaps all chroots, installs a specific UI (xfce4 and
plasma-mobile currently, easy to extend), runs it via Qemu and checks the
running processes via SSH.
* Version checking testcase: rewritten to include Alpine's testsuite file in
our source tree, so we don't need to clone their git repo anymore. Now it
is enabled for Travis.
* All this gives us a nice 10% code coverage boost
* Increased the `hello-world` pkgrel to verify that the Travis job is working.
* Various fixes
* Build device-packages for the device arch and don't raise an
exception, but print a note if --ignore-depends is not specified
and therefore the kernel gets installed, too.
* Don't use --force when building in Travis (because abuild doesn't
check the checksums then. Bug report on the way.)
* Don't run the building process in the background, but wait for its
completion
* Exit with 1 when showing usage in check_checksums.py
It used to have an entry for /mnt/pmbootstrap-packages, which only
makes sense while working on the chroot with pmbootstrap. After the
installation on the device, there's no repo in that path.
Furthermore, empty lines were added to the recovery installer script
for readability (thanks @ata2001!)
* Fail if mkbootimg/uboot-tools are not installed, but creating a
boot.img file / u-boot legacy image was requested via deviceinfo
(fixes#312)
* Fail if /boot/dt.img is missing, but we have a qcdt device
* Fail if the dtb file specified in deviceinfo does not exist
* Fail if mkbootimg etc. exit with error code
* Don't try to add the ext4 module into the initramfs. We always
compile it into the kernel. Instead, kconfig_check makes sure it
is enabled now. (fixes#1037)
* Add a note that modprobe warnings can be ignored mostly
Fixes#893. Changes:
* New action: "pmbootstrap pkgrel_bump"
* pmbootstrap detects missing soname depends when trying to install
anyting, and suggests "pkgrel_bump --auto" to fix it
* Testcase test_soname_bump.py checks the pmOS binary package repo
for soname breakage, so we see it when CI runs for new PRs
* libsamsung-ipc: bump pkgrel because of soname bump
Add a blobtools option to the deviceinfo file for creating specific
blobs for the Asus TF101 tablet. This will make it easier to flash
afterwards with ADB.
This is for making a kernel image for the TF101 easier. See also:
ttps://github.com/postmarketOS/pmbootstrap/pull/1103#issuecomment-357035481
The TF101 does not support normal Android boot images and instead needs
a blob to be created.
Also added the watchdog-kick package:
Some devices (namely Nokia N9/950) use more than one watchdog, and
watchdog-kick package kicks all of /dev/watchdogs? every 10 seconds so
they don't reset the device
* Using full diff skipping v4.15-rc1
cgit doesn't generate proper patches for binary files (one was added in
v4.15-rc1 and removed in v4.15-rc5 because it also introduced a new
build-time dependency which is now solved). For 4.16 the "old" source
lines can be re-added but until then a full diff skipping v4.15-rc1
is needed.
* Add patch from linux-next to fix the build on some machines
(sync-check.sh was not executable, see #950)
* Changed usb-shell behavior, it wait for some user action before continue booting
* Rename usb-shell to debug-shell and changed port to 23
* Add `20-debug-shell.sh` script to static code analysis
* Enable eth0 interface in initramfs (qemu)
* Add additional script to run a shell in order to be able to kill it from a telnet session
* Rename deviceinfo variable flash_methods to flash_method
* Update pmb.config.deviceinfo_attributes / add sanity check
* Add test case that parses all deviceinfo files
Also removed the Alpine maintainer (as we usually do so we don't
annoy him) and changed the pkgver to 9999 (this package is present
in upstream Alpine, we don't want it to get replaced when Alpine
updates their version).
* Added a lot more Luna packages. It is now possible to start Luna, complete the first use app, and use the system. ARM support still broken.
* Cleanup & testing fixes. Starting in a fresh qemu environment works, but isn't quite deterministic. See wiki page for details
Add qt5-qtbase with OpenGL ES2 enabled and adjust the
upstream compatibility test case.
* Test case: don't get the qt5-qtbase version from any APKINDEX, but
only from Alpine's community APKINDEX
* Test case: If the pkgver is 9999, look at _pkgver
* Upgrade Qt libs to 5.9.3
* Add test case to make sure we are always in sync with Alpine's QT
and update qt5-qtsensors, too.
* Remove qt5-qtquickcontrols2 (it's in Alpine now)
It made problems, see #956 and #952. Originally this was added, so
our plasma mobile packaging - which targets wayland - doesn't need
to depend on X11 stuff. And because dbus-x11 caused a 1 minute
wait for an X server (#377).
We have yet to figure out if this problem returns, but even if that
happens, it's better than having it completely broken. And we can
probably figure out a better way to fix it (for real).
Contains everything from #940, except on top of master now.
Also added a postmarketos-ui-luna package to be a meta-
package for all of the Luna work.
Every component included here builds & runs, but isn't
functional without a handful more packages.
* Add postmarketos-ui-plasma-mobile
* Add more required packages
* Upgrade plasma sources
* Modernize APKBUILDs
* Make it run in general
* Support RGB32 framebuffer with BGR order (thanks @zhuowei!)
The mesa driver, which ends up in the installation image, needs to be known
before the installation is done (in other words: when running the qemu action,
it is to late as the image has already been generated). That's why one can
choose the Qemu mesa driver in `pmbootstrap init` now:
```
Device [qemu-amd64]:
Which mesa driver do you prefer for your Qemu device? Only select something other
than the default if you are having graphical problems (such as glitches).
Mesa driver (dri-swrast/dri-virtio) [dri-virtio]:
```
It is still possible to select `dri-swrast`, because `dri-virtio` may not work
in all cases, and that way we could easily debug it or experiment with other
mesa drivers (e.g. the "vmware" one, which is supported by mesa and Qemu).
Other changes:
* `pmbootstrap qemu` accepts a `--display` variable now, which passes the value
directly to `qemu`'s `display` option. It defaults to `sdl,gl=on` (@PureTryOut
reported that to work best with plasma mobile on his PC). `--display` and
`--spice` (which is still working) are mutually exclusive.
* Removed obsolete telnet port pass-through: We only use the debug telnet port
since osk-sdl has been merged.
* Add show-cursor to the Qemu command line, so it shows a cursor in X11
* Refactored the spice code (`command_spice` only returns the spice command,
because it has all necessary information already) and the spice port can be
specified on the commandline now (previously it was hardcoded in one place and
then always looked up from there).
* Start comments with capital letters.
* Keep the log on the screen a bit shorter (e.g. Qemu command is written to the
"pmbootstrap log" anyway, so there's no need to display it again).
* linux-postmarketos-stable: Adjust kernel configs
x86_64, armhf: enable as modules:
CONFIG_DRM_VIRTIO_GPU, CONFIG_VIRTIO_PCI, CONFIG_VIRTIO_BALLOON
aarch64: all 3 options were already enabled as built-in (no change)
* Set '-vga virtio' for mesa-dri-virtio
