Upstream keeps making breaking changes in patch releases.
Let's fork alsa-ucm-conf entirely for now instead of just patching
in some files to ensure that these files don't break every few months.
This fixes audio on MSM8916 devices when not using the modem.
This subpackage was removed when a proper fix for suspend was merged,
however apk doesn't know to purge this subpackage, so the old elogind
hook workaround stuck around. This workaround could probably be removed
once we're sure all folks on edge have installed this upgraded package
with the 'provides'...
- re-enable console suspend, which seems to be broken with elogind when
suspending (kernel gets hung up indefinitely in vt_waitactive)
- add a suspend hook to work around the musb driver not allowing the
device to suspend
Based on my testing, this option seems to prevent suspending via
elogind (using `loginctl suspend`). When console suspend is disabled,
the kernel gets hung up in the call to vt_waitactive, and elogind times
out trying to suspend.
qrtr-ns is now part of the Linux kernel (as of version 5.9), so
there is no need to start it in userspace anymore. It does not seem
to be needed (or working) on downstream either.
linux-postmarketos-qcom-msm8996 is the only mainline kernel which
is still on < 5.9. In preparation to make the qrtr dependency optional
for rmtfs, let's explicitly enable qrtr-ns for MSM8996 devices to avoid
causing regressions.
Update to kernel 5.9 with the following changes:
* Change tri-state key to macro keys instead of 'A', 'B' and 'C' keys.
[ci:skip-build]: already built successfully in CI
Initial support for Sony Xperia XA (codename: sony-tuba). Builds, can be
flashed, ssh connection through usb works, display works, touchscreen works,
no wifi or anything else.
According to the wiki pages, some interfaces can't be built for the
armhf architecture. This device is configured to armhf but it actually
supports armv7 architecture. Tested with a samsung-i9300.
This new version:
- Upgrades device config from upstream to v25
- Fixes a problem using modesetting driver on Xorg (lightdm
was broken because it now uses Xorg)
- Override GDK to use GLES (change from upstream Purism)
Replace the old downstream port with a new aarch64 port running the
linux-postmarketos-qcom-msm8916 close-to-mainline(TM) kernel.
Most of the functionality is working:
- USB Network
- Storage (eMMC, SD card)
- Display, brightness control
- Touchscreen, buttons
- IMU (accelerometer+gyroscope)
- Notification LED
- Sound (Speaker, Headphones, Microphones)
- WiFi, Bluetooth
- Modem (SMS, voice calls, mobile data)
Coming soon (hopefully): Battery/Charging, USB-OTG (not working yet)
There are many variants of the device, so more changes to handle
differences between them may be needed in the future. For now,
the only relevant difference is the required modem firmware:
- wt88047 (global variant)
- wt86047 (China variant)
... have different kind of modems and they do not seem to work with
the firmware of the other one. The way this is handled in this device
package is that there is a separate kernel variant for both of them.
All other required firmware can be shared, and therefore there is no
differentiation needed when using the kernel variant without modem.
I renamed "wingtech-wt88047" to "xiaomi-wt88047".
My reasoning for that is the following:
- Wingtech is the ODM (original design manufacturer), they designed the
hardware and (probably) manufactured it. But postmarketOS port applies
to the combination of both hardware and firmware, and the firmware was
at least partially provided by Xiaomi.
- wt88047 looks lonely with the "wingtech" vendor, when all other Xiaomi
devices use "xiaomi", even though many from them were probably also
designed by Wingtech.
- We don't use the ODM hardware name for other devices either, e.g.
"wileyfox-crackling" would be "longcheer-l8150" with the same approach.
I think the port is better visible as "xiaomi-wt88047" (too bad Xiaomi
seemingly did not have a proper codename for this device...)
In preparation for adding mainline device port for Xiaomi Redmi 2
(wt88047), remove the downstream device port. It's still armhf
which makes it clear that it hasn't been tested for a long time.
The mainline port has many more features, also it is aarch64, which
is not compatible with the downstream kernel.
Actually the display has been working in initramfs since MR 1261
(device-bq-paella: enable display and touchscreen on boot).
We should make it explicit in deviceinfo.
device-motorola-ocean: Add support for both downstream and mainline
kernel
device-motorola-ocean: Update dependency for downstream kernel
The dependency mentioned is wcnss-wlan.
Apply 1 suggestion(s) to 1 file(s)
Device package changes:
- Replace ALSA configs with dependency (soc-sprd-audio-sc8830)
- Add reboot-mode as dependency
Kernel package changes:
- Use dtbtool-sprd instead of dtbtool
- Move code and device tree to external repo
- Add patch for GCC10
- Add patches for framebuffer
This Patch is needed, because in the kernel the audio from the cpu to the headset gets turned around. We need to turn this around again.
Please revert this if there is a fixed kernel.
This adds a Finnish/Swedish key map for the Nokia n900.
The same keymap is used for Finnish and Swedish.
This makes the keyboard work in the console. To fix the
XkbLayout other changes are needed to pmbootstrap.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- E1565 is original "grouper" and it's for modern devices similar to
tilapia
- PM269 is earlier produced Nexuses with different PMIC (not very often
seen)
Closes: https://gitlab.com/postmarketOS/pmaports/-/issues/647
This patch adds basic support for the Samsung Galaxy Tab E 9.6" (SM-T560).
Current status: Kernel builds successfully, flashing boot.img works along with ssh.
Update to Linux 5.8 and bring some nice improvements:
* Use geni for touch instead of CPU driven bitbang, this gives
noticeable performance gains in phosh when scrolling.
* Enable bluetooth (using firmware in updated firmware package), was
able to test bluetooth audio with bluetoothctl but phosh UI shows no
Bluetooth adapter.
* Add testing battery node using bq27541, battery always reported being
plugged in and at 100%.
* Fix UFS error spam due to a bug where writeboost is enabled for all
qcom devices - even though it isn't supported.
* Add quirk to wifi device to fix host capability request rather than
the dodgy driver edit that was used before.
* Minimise .config size to improve build times.
* Make schedutil the default governer
* Fix power button
Remove _downstream, _mainline in deviceinfo as there is only the
mainline kernel now. Fixup taken from a comment by Richard Qian in the
initial device port merge request. I've verified that the device package
builds. [ci:skip-build]
Fixes: 949effc0 ("acer-picasso: new device (Acer Iconia Tab A500) (MR 1308)")
Alpine's abuild is soon going to complain if an APKBUILD has more than
one "Maintainer:" listed. Work around it by renaming the additional
maintainers to "Co-Maintainer:". While at it, move the devicepkg reference
link to the top in device-xiaomi-santoni for consistency.
In postmarketOS, we require at least two maintainers for devices in
main, therefore it does not make sense to drop additional maintainers
from the file.
In Alpine, this change was made because pkgs.alpinelinux.org apparently
can't handle more than one maintainer. I looked into it, and it would
require a database change to add it there, so it does not seem worth the
effort. I also thought about extending abuild to add an environment
variable to skip the check, but then the package would not build with
plain abuild without using the env var.
Related: dd4cd9d606
[ci:skip-build] [ci:skip-vercheck]
[ci:skip-build]: build in CI is currently failing with 'BAD signature'
errors; probably caused by outdated Alpine packages in the dl-cdn
mirror, related to the musl-1.2 rebuild in Alpine edge.
samsung-skomer basically uses the same BCM4334 WiFi/BT chip as
samsung-golden, and the WiFi/BT firmware is also the same.
There seems to be a slightly different NVRAM file, so we package
that just to do things properly.
Signed-off-by: Danct12 <danct12@disroot.org>
(cherry picked from commit f509c39642341c7d4fb5d0d215a6cb581b4156d1)
[ci:skip-build] Takes too long. Builds fine locally
Enable CONFIG_CRYPTO_XTS for each kernel, so we can switch to using
aes-xts-plain64 as default cipher for cryptsetup (override with
"pmbootstrap --cipher"), instead of aes-cbc-plain64 (pmbootstrap#1940).
I have executed "pmbootstrap kconfig edit" on each kernel, and manually
toggled the option. The diff is not always clean, because for some
kernels it is apparently the first time, that menuconfig was executed on
the configs like that. In a few instances, it turned out that
CONFIG_ANDROID_PARANOID_NETWORK needed to be disabled too (this is
already a requirement, but as the config was incomplete, it was not
visible that this option was enabled). Very few times, I had to enable
CONFIG_EXPERIMENTAL in order to see and enable CONFIG_CRYPTO_XTS.
It would be great if we could automate such mass kconfig edits in the
future, see pmbootstrap#1942.
[skip ci]: I have verified, that every single one of these kernels builds.
CI will likely run out of time while downloading source tarballs.
Remove it, to prevent the following error:
rm: can't remove '.config': No such file or directory
This must have been necessary before, because the prepare script was
different, or abuild did something differently.
Make it possible to find the kernel config with "pmbootstrap kconfig
edit". While at it, also remove redundant -C "$builddir" arguments for
make (since prepare is running in $builddir already).
Package got renamed and "provides" wasn't added, so right now
`apk upgrade -a` with firmware-rtl8723bt installed results in
`ERROR: firmware-pine64-rtl8723bt-0_git20181104-r0: trying to overwrite lib/firmware/rtl_bt/rtl8723bs_config-pine64.bin owned by firmware-rtl8723bt-0_git20181104-r0.`
Add `replaces="firmware-rtl8723bt"` so `apk` prefers this package.
[ci:skip-build]: already built successfully in CI
Right now we have all firmware packages under firmware/*.
This is problematic for mainly two reasons:
- It's not immediately clear which firmware packages we need to keep
when forking a new stable branch. (Where we delete testing devices
at the moment...) We might end up deleting firmware packages that
are actually used by one of the devices in community.
- When backporting devices to the stable we cannot just cherry-pick
the commit that moved the device to community (since it does not
contain the firmware package). Instead we need to cherry-pick
earlier commits as well, which may touch a lot of deleted files
in the testing directory.
Let's make this consistent by also placing the firmware packages in
the device/* directory. We already have the common firmware- prefix
to distinguish them from device/kernel packages, which are already
both under the device/* directory.
For most firmware packages we use a vendor- prefix to make it clear
who has provided the firmware. The firmware-rtl8723bt package is only
used for Pine64 devices and actually contains configs that are specific
to Pine64 hardware (e.g. rtl8723bs_config-pine64.bin).
Let's rename it to firmware-pine64-rtl8723bt to make this more clear.
Also cleanup the APKBUILD a bit and provide the LICENSE file in a -doc
subpackage so we can legally redistribute that firmware.
