Unfortunately, the oppo-a51f has been unmaintained for quite some time
now. The original author (harutora) has disappeared and no one else
seems to have this device. The device port has several open problems:
1. The device was never added properly to upstream lk2nd, because
of a special (OPPO-specific) boot image format. Users need to
compile and install some outdated version of lk2nd, which is no
longer (fully) compatible with newer kernel versions.
2. The authorship of the Linux changes are unclear: They were created
with a "no-reply" email address and without Signed-off-by line
that clarifies the licensing of the changes and permits upstreaming
the patches.
Since oppo-a51f is the last remaining device port in linux-postmarketos
-qcom-msm8916 with this problem, I decided to drop the patches from the
kernel, at least until harutora returns or can clarify the authorship
of the created patches.
Also, moving the modemmanager.conf file from the main package to the
nonfree-firmware subpackage as Modem Manager is going to work
only if the nonfree-firmwares are present.
The soc-qcom-sdm845-nonfree-firmware dependency is now moved from
firmware-xiaomi-beryllium package to the device package.
This will make the firmware package to only depend on firmware files.
The soc-qcom-sdm845-nonfree-firmware dependency is now moved from
firmware-oneplus-sdm845 package to the device package.
This will make the firmware package to only depend on firmware files.
The soc-qcom-sdm845-nonfree-firmware dependency is now moved from
firmware-oneplus-sdm845 package to the device package.
This will make the firmware package to only depend on firmware files.
The soc-qcom-sdm845-nonfree-firmware dependency is now moved from
firmware-shift-sdm845 package to the device package.
This will make the firmware package to only depend on firmware files.
The soc-qcom-sdm845-nonfree-firmware dependency is now moved from
firmware-shift-sdm845 package to the device package.
This will make the firmware package to only depend on firmware files.
Also, pmb:cross-native is added to the package options so CI testcases
doesn't fail.
The soc-qcom-sdm845-nonfree-firmware dependency is now moved from
firmware-oneplus-sdm845 package to the device package.
This will make the firmware package to only depend on firmware files.
Also, pmb:cross-native is added to the package options so CI testcases
doesn't fail.
The soc-qcom-sdm845-nonfree-firmware dependency is now moved from
firmware-xiaomi-beryllium package to the device package.
This will make the firmware package to only depend on firmware files.
Also, pmb:cross-native is added to the package options so CI testcases
doesn't fail.
I'm not deduplicating the UCM files between m3 and m0 as I may not
always be able to test changes to m3, and I'd rather have a an
outdated configuration for m3 than a broken one.
Apparently works significantly better on SHV-E210S and seems to
work about equally well on i9300. Besides, using upstream firmware
with a clear licence is nice. Also use different nvram file for m3.
In preparation to removal of linux-postmarketos repo, switch
source to different source mirror.
P.S: sourcehut can't serve bz2 archives, I had to switch to gz
P.P.S: I'm not sure I'll keep repo on sourcehut forever, but let's try
See also: https://gitlab.com/postmarketOS/postmarketos/-/issues/47
[ci:skip-vercheck]
[ci:skip-build] Already built fine on CI in MR
In preparation to removal of linux-postmarketos repo, switch
source to different source mirror.
I had to switch to gzip archive, because github doesn't serve bzip2.
I did a kconfig edit -> change nothing -> exit saving to regenerate config.
See also: postmarketos#47
[ci:skip-build] Already built fine on CI in MR
CONFIG_MSM_KGSL (Kernel Graphics Subsystem Layer) breaks the framebuffer
in mysterious ways even on this device. This MR disables KGSL to restore
framebuffer functionality.
- Add support for the rear camera on xiaomi-scorpio
- Improve charging from SDPs
- Add extcon support on oneplus-oneplus3(t)
- Add container and zram kconfig checks to APKBUILD
[ci:skip-build] Already built successfuly on CI in MR
Also temporarily switch to Linus Walleij's branch to enable charging.
Patches should be upstreamed to mainline by Linux 5.18.
emmc.patch: Linux no longer hangs without this
fix-boot-regression-skomer.patch: Upstreamed and included here
[ci:skip-build] Already built fine on CI in MR
https://wiki.postmarketos.org/wiki/Asus_Zenfone_Max_Pro_M1_(asus-x00td)
Initially ported by Alice Koul.
iAboothahir: set CONFIG_DEVPTS_MULTIPLE_INSTANCES and remove empty deviceinfo_*
Signed-off-by: Alice Koul <alice-koul@protonmail.com>
Signed-off-by: iAboothahir <aboothahirpkd@gmail.com>
[ci:skip-build] Already built once fine on CI in MR
- update to kernel 5.15.25 stable
- add TUN as module, fixes pma#1435
- drop fully-upstreamed patches (lp55xx)
- add iio support for lis302dl (will send upstream)
- update N900 dts for lis302dl over iio (will send upstream)
- assign higher priority to patches from kernel.org (resolves pmb#2107)
[ci:skip-build] already built successfully in CI
The package `device-pine64-pinephone-vccq-mod` installs a u-boot user script.
The user script was loaded at address 0x50100000 partially overwriting
the initramfs (0x4FF00000-0x5015facd), and causing a boot loop.
The user script load address was increased to 0x50700000, leaving 8MB
of free space for the initramfs, the current initramfs size is 2.37MB.
This firmware is useful for other devices (m3, t0lte, p4note, ...), so
let's give it a more generic name and split up WiFi and Bluetooth into
separate packages as the WiFi firmware isn't useful for t0lte at the
moment. Also drop the downstream kernel firmware from here to simplify
the APKBUILD, and give it its own package in the following commit.
For a merge list, please see the merge commits:
- 5.16.3 - (98fb3b4121)
- 5.16.4 - (2962c41f9d)
- 5.16.5 - (9ee391628f)
Change-Id: If5ba0303b6a9a636ec1f303739804a9fa9c37e2a
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build] Already built successfuly on CI in MR
Do not fiddle with a compiled .a file from the vendor, rather
ignore it and add functional equivalent sources.
[ci:skip-build] Already built successfuly on CI in MR
Uses upstream u-boot with (only) 4 downstream patches. The device also
boots way quicker now, no need to hold the power button for multiple
seconds anymore
[ci:skip-build] Already built well once on CI in MR
With this wifi seem to work reliably, and it is possibly to for
example connect to a bluetooth speaker and play music.
For wifi, issue seem to be with the nvram_net.txt file, changing only
that one to a newer one makes wifi work. Here, both the .txt and .bin
file are updated, as the old files are from 2012, while the new
ones have a datestamp from 2019.
This command was missed when bl1, bl2 and tzsw were renamed. Truncate
apparently creates a new file of the specified size if file doesn't
exist (instead of failing), so this was missed by CI.
Use the new linux-postmarketos-exynos5 package. A dtb for klimtwifi
is added as well, even though the device has not been ported yet.
[ci:skip-build]: Already built successfully in MR CI.
This allows to get wlan to work properly.
Change-Id: I52bab348f83b49a5b31cdeddd15e542049ac3089
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Using uInitrd is no longer necessary. I'm not sure *why*, but it just
works using the non-u-boot-image initramfs. The post-upgrade script was
changed to clean up the old images from /boot/u{Image,Initrd}, restoring
a lot of free space in that partition (~25MB)
This also sneaks in a small 1 character change to silence removing the
gpsd service from the default runlevel
[ci:skip-build]: already built successfully in CI
This is a cherry pick of Leste commit 2c7e4a1ac8ec1f908927793e893566aac3dcb9df,
to revert mainline commit f959dcd6ddfd29235030e8026471ac1b022ad2b0, which breaks
N900 modem. This is a temporary workaround until a proper fix is found.
This moves the kernel to the one on the pine64-org/linux Gitlab org.
This kernel is (will) be shared with other distributions and is a common
base we can all rely on. It enables Wi-Fi, Bluetooth, the battery
indicator and charging, rotation, modem and other things.
[ci:skip-build] Already built successfully on CI
* upgrade kernel to 5.15.13
* add patch for better nl80211 support in wl1251
* add config options to support iwd
[ci:skip-build] Already built on CI in MR
With this you can get the modem and wifi running nearly out of the box.
As the kernel currently doesn't support UFS (internal storage) you need
to dump the following partitions using dd in TWRP or similar:
fsc, fsg, modemst1, modemst2, tunning
Place those as files in the rootfs in /modem-partitions/ and add "-o
/modem-partitions" to the rmtfs arguments by modifying /etc/init.d/rmtfs
and changing command_args to "-P -r -o /modem-partitions".
[ci:skip-build] already built successfully in CI
