Do not fiddle with a compiled .a file from the vendor, rather
ignore it and add functional equivalent sources.
[ci:skip-build] Already built successfuly on CI in MR
Uses upstream u-boot with (only) 4 downstream patches. The device also
boots way quicker now, no need to hold the power button for multiple
seconds anymore
[ci:skip-build] Already built well once on CI in MR
With this wifi seem to work reliably, and it is possibly to for
example connect to a bluetooth speaker and play music.
For wifi, issue seem to be with the nvram_net.txt file, changing only
that one to a newer one makes wifi work. Here, both the .txt and .bin
file are updated, as the old files are from 2012, while the new
ones have a datestamp from 2019.
This command was missed when bl1, bl2 and tzsw were renamed. Truncate
apparently creates a new file of the specified size if file doesn't
exist (instead of failing), so this was missed by CI.
Use the new linux-postmarketos-exynos5 package. A dtb for klimtwifi
is added as well, even though the device has not been ported yet.
[ci:skip-build]: Already built successfully in MR CI.
This allows to get wlan to work properly.
Change-Id: I52bab348f83b49a5b31cdeddd15e542049ac3089
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
This moves the kernel to the one on the pine64-org/linux Gitlab org.
This kernel is (will) be shared with other distributions and is a common
base we can all rely on. It enables Wi-Fi, Bluetooth, the battery
indicator and charging, rotation, modem and other things.
[ci:skip-build] Already built successfully on CI
With this you can get the modem and wifi running nearly out of the box.
As the kernel currently doesn't support UFS (internal storage) you need
to dump the following partitions using dd in TWRP or similar:
fsc, fsg, modemst1, modemst2, tunning
Place those as files in the rootfs in /modem-partitions/ and add "-o
/modem-partitions" to the rmtfs arguments by modifying /etc/init.d/rmtfs
and changing command_args to "-P -r -o /modem-partitions".
[ci:skip-build] already built successfully in CI
Basic support for the Tolino Shine 2 HD ebook reader.
Waveform handling shares the same oddities as for the Kobo Clara HD
but the file epdc_E060SCM.fw from the IMX6SL BSP from NXP does also work.
The existing waveform from SD card is used.
Preferred way to install is to clone the internal SD, keeping the original
as a backup, install on that clone.
U-Boot is a more recent one than the factory u-boot, so devicetrees are nicely
supported. Kernel is the near mainline kernel also used by the Kobo Clara HD.
About Wifi: Handling of the configuration file for boards with brcmfmac is not
supported yet.
[ci:skip-build] already built successfully in CI
It makes more sense here as it's also signed by OnePlus (instead of
just Qualcomm) and is expected to be here since
linux-postmarketos-qcom-msm8998>=5.16.0_rc6.
This adds a firmware package firmware-shift-sdm845 containing
BT, GPU and WiFi firmware, which allows to enable hardware
acceleration to get phosh up and running.
Change-Id: Iaef46ccd51a756ad44642769e64202a7c534be9c
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
This MR removes the downstream kernel package linux-shift-axolotl
and uses linux-postmarketos-qcom-sdm845 instead, as it has
recently added support for the SHIFT6mq (axolotl).
Change-Id: I79427820686eb813cb21f57d6bddc0d2f7984b6a
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Uses now DRM variant of EPDC driver. Updates will work automatically
without using special APIs.
Note:
/sys/class/graphics/fbcon/cursor_blink should probably be set to zero
to avoid battery draining if text console is displayed
[ci:skip-build] Already built on CI in MR
