If .git/config symlinks are ever a thing, this will handle them better.
But mostly, this is to avoid git-repair needing to include CopyFile,
which would complicate it unduely.
In commit dfc4e641b5 git repair was changed
to use remote name, not url, when fetching. But it fetches into a temporary
git repo, which doesn't have remotes configured. Oops.
(In my defense, that commit was made just as covid lockdown started. But
testing? Urk.)
Sponsored-by: Mark Reidenbach on Patreon
Fixed bug that interrupting git-annex repair (or assistant) while it was
fixing repository corruption would lose objects that were contained in pack
files.
Unpack all pack files and move objects into place *before* deleting the
pack files. The old approach moved the pack files to a temp directory
before unpacking them, which was not interruption safe.
Sponsored-By: Jochen Bartl on Patreon
Eg, when git commit runs the smudge filter.
Commit 428c91606b introduced the crash,
as write-tree fails in those situations. Now it will work, and git-annex
always gets up-to-date information even in those situations. It does
need to do a bit more work, each time git-annex is run with the index
locked. Although if the index is unmodified from the last time
write-tree succeeded, that work is avoided.
Added a note to man page about what happens to information that is
recorded in the private journal. Since it uses Branch.get, that
information will be copied when options allow. It seemed better to allow
it and document it than not allow it, since the options allow excluding
repositories and so can be used to exclude private repos if desired.
Fix behavior of several commands, including reinject, addurl, and rmurl
when given an absolute path to an unlocked file, or a relative path that
leaves and re-enters the repository.
To avoid slowing down all the cases where the paths are already ok
with an unncessary call to getCurrentDirectory, put in an optimisation
in relPathCwdToFile. That will probably also speed up other parts of
git-annex by some small amount, but I have not benchmarked.
Note that I did not convert branchFileRef, because it seems likely that
it will be used with a file that is not provided by the user, so is already
in a sane format. This is certainly true for the way git-annex uses it,
though maybe arguable to the extent Git.Ref is a reusable library.
The slightly unusual parsing in Types.GitConfig avoids the need to look
at the remote list to get configs of remotes. annexPrivateRepos combines
all the configs, and will only be calculated once, so it's nice and
fast.
privateUUIDsKnown and regardingPrivateUUID now need to read from the
annex mvar, so are not entirely free. But that overhead can be optimised
away, as seen in getJournalFileStale. The other call sites didn't seem
worth optimising to save a single MVar access. The feature should have
impreceptable speed overhead when not being used.
If it's passed a ConfigKey such as annex.version, avoid returning
an empty remote name and return Nothing instead. Also, foo.bar.baz is
not treated as a remote named "bar".
Which generated unusual git trees that could confuse git merge,
since they incorrectly had 2 subtrees with the same name.
Root of the bug was a) not testing that at all! but also
b) confusing graftdirs, which contains eg "foo/bar" with
non-recursively read trees, which would contain eg "bar"
when reading a subtree of "foo".
It's worth noting that Annex.Import uses graftTree, but it really
shouldn't have needed to. Eg, when importing into foo/bar from a remote,
it's enough to generate a tree of foo/bar/x, foo/bar/y, and does not
include other files that are at the top of the master branch. It uses
graftTree, so it does include the other files, as well as the foo/bar
tree. git merge will do the same thing for both trees. With that said,
switching it away from graftTree would result in another import
generating a new commit that seems to delete files that were there in a
previous commit, so it probably has to keep using graftTree since it
used it before.
This commit was sponsored by Kevin Mueller on Patreon.
Seems that hasOrigin was never finding origin's git-annex branch, so a new
one got created each time. And so then it later needed to merge the two
branches, which is expensive.
Added --no-track to git branch to avoid it displaying a message about
setting up tracking branches. Of course there's no reason to make the
git-annex branch a tracking branch since git-annex auto-merges it.
Not yet used, but allows getting the size of items in the tree fairly
cheaply.
I noticed that CmdLine.Seek uses ls-tree and the feeds the files into
another long-running process to check their size. That would be an
example of a place that might be sped up by using this. Although in that
particular case, it only needs to know the size of unlocked files, not
locked. And since enabling --long probably doubles the ls-tree runtime
or more, the overhead of using it there may outwweigh the benefit.
I don't think this actually fixes any buggy behavior in git-annex, I
just noticed that using treeItemToLsTreeItem and then serializing it
resulted in something starting with "160000 blob" rather than
"160000 commit"
Git.Remote.parseRemoteLocation had a hack to handle URIs that contained
characters like spaces, which is something git unfortunately allows
despite not being a valid URI. However, that hack looked for "//" to
guess something was an URI, and these gcrypt URIs, being to a local
path, don't contain that. So instead escape all illegal characters and
check if the resulting thing is an URI.
And that was already done by Git.Construct.fromUrl, so
internally the gcrypt URI with a space looks like "gcrypt::foo%20bar"
and that needs to be de-escaped when converting back from URI to local
repo path.
This change might also allow a few other almost-valid URIs to be handled
as URIs by git-annex. None that contain "//" will change, and any
behavior change should result in git-annex doing closer to a right thing
than it did before, probably.
This commit was sponsored by Noam Kremen on Patreon.
When a git remote is configured with an absolute path, use that path,
rather than making it relative. If it's configured with a relative path,
use that.
Git.Construct.fromPath changed to preserve the path as-is,
rather than making it absolute. And Annex.new changed to not
convert the path to relative. Instead, Git.CurrentRepo.get
generates a relative path.
A few things that used fromAbsPath unncessarily were changed in passing to
use fromPath instead. I'm seeing fromAbsPath as a security check,
while before it was being used in some cases when the path was
known absolute already. It may be that fromAbsPath is not really needed,
but only git-annex-shell uses it now, and I'm not 100% sure that there's
not some input that would cause a relative path to be used, opening a
security hole, without the security check. So left it as-is.
Test suite passes and strace shows the configured remote url is used
unchanged in the path into it. I can't be 100% sure there's not some code
somewhere that takes an absolute path to the repo and converts it to
relative and uses it, but it seems pretty unlikely that the code paths used
for a git remote would call such code. One place I know of is gitAnnexLink,
but I'm pretty sure that git remotes never deal with annex symlinks. If
that did get called, it generates a path relative to cwd, which would have
been wrong before this change as well, when operating on a remote.
Fixed that, and made parserLsTree accept the space as well as tab.
Fixes a reversion that made import of a tree from a special remote result in
a merge that deleted files that were not preferred content of that special
remote.
After the last commit, it was able to throw errors just due to an
unparseable url. This avoids needing to worry about that, as long
as the call site has already checked that it has a parseable url.
Including the non-standard URI form that git-remote-gcrypt uses for rsync.
Eg, "ook://foo:bar" cannot be parsed because "bar" is not a valid port
number. But git could have a remote with that, it would try to run
git-remote-ook to handle it. So, git-annex has to allow for such things,
rather than crashing.
This commit was sponsored by Luke Shumaker on Patreon.
In addition to regular file deletions, the removefiles argument passed
to adjustTree may contain removed submodules. When making the new
tree, filter these out in the same way that is done for regular files
so that the deletion is propagated.
This is conceptually very simple, just making a 1 that was hard coded be
exposed as a config option. The hard part was plumbing all that, and
dealing with complexities like reading it from git attributes at the
same time that numcopies is read.
Behavior change: When numcopies is set to 0, git-annex used to drop
content without requiring any copies. Now to get that (highly unsafe)
behavior, mincopies also needs to be set to 0. It seemed better to
remove that edge case, than complicate mincopies by ignoring it when
numcopies is 0.
This commit was sponsored by Denis Dzyubenko on Patreon.
I don't think this affected git-annex currently, but if the same command
was queued twice with different params, one set of params was thrown
away, and the files going with those were run with the other set of
params.
This makes sync a lot faster in the common case where there's no new
backup.
There's still room for it to be faster. Currently the old imported tree
has to be traversed, to generate the ImportableContents. Which then
gets turned around to generate the new imported tree, which is
identical. So, it would be possible to just return a "no new imports",
or an ImportableContents that has a way to graft in a tree. The latter
is probably too far to go to optimise this, unless other things need it.
The former might be worth it, but it's already pretty fast, since git
ls-tree is pretty fast.
9cb250f7be got the ones in RawFilePath,
but there were others that used the one from unix-compat, which fails at
runtime on windows. To avoid this,
import System.PosixCompat.Files hiding removeLink
This commit was sponsored by Ethan Aubin.
I'm not sure if git documents it aside from 0 and 1, but any integer
can be interpreted as a bool by it. Doing the same in git-annex is good
for consistency. Also, I am planning a config that starts out as a
numeric range, but will later transition to a simple bool (hopefully),
which this interpretation supports well.
All properties changed to use them, except for
prop_encode_c_decode_c_roundtrip, which already filtered to ascii
for other reasons.
A few modules had to be split out, because Setup does not build-depend
on QuickCheck.
nukeFile replaced with removeWhenExistsWith removeLink, which allows
using RawFilePath. Utility.Directory cannot use RawFilePath since setup
does not depend on posix.
This commit was sponsored by Graham Spencer on Patreon.
Notable wins in Annex.Locations which was sometimes doing 6 conversions
in a single function call.
This commit was sponsored by Denis Dzyubenko on Patreon.
