Converted warning and similar to use StringContainingQuotedPath. Most
warnings are static strings, some do refer to filepaths that need to be
quoted, and others don't need quoting.
Note that, since quote filters out control characters of even
UnquotedString, this makes all warnings safe, even when an attacker
sneaks in a control character in some other way.
When json is being output, no quoting is done, since json gets its own
quoting.
This does, as a side effect, make warning messages in json output not
be indented. The indentation is only needed to offset warning messages
underneath the display of the file they apply to, so that's ok.
Sponsored-by: Brett Eisenberg on Patreon
giveup changed to filter out control characters. (It is too low level to
make it use StringContainingQuotedPath.)
error still does not, but it should only be used for internal errors,
where the message is not attacker-controlled.
Changed a lot of existing error to giveup when it is not strictly an
internal error.
Of course, other exceptions can still be thrown, either by code in
git-annex, or a library, that include some attacker-controlled value.
This does not guard against those.
Sponsored-by: Noam Kremen on Patreon
It will then proceed to add the file the same as if it were any other
file containing possibly annexable content. Usually the file is one that
was annexed before, so the new, probably corrupt content will also be added
to the annex. If the file was not annexed before, the content will be added
to git.
It's not possible for the smudge filter to throw an error here, because
git then just adds the file to git anyway.
Sponsored-by: Dartmouth College's Datalad project
filter-process: New command that can make git add/checkout faster when
there are a lot of unlocked annexed files or non-annexed files, but that
also makes git add of large annexed files slower.
Use it by running: git
config filter.annex.process 'git-annex filter-process'
Fully tested and working, but I have not benchmarked it at all.
And, incremental hashing is not done when git add uses it, so extra work is
done in that case.
Sponsored-by: Mark Reidenbach on Patreon
Commit 4bf7940d6b introduced this
problem, but was otherwise doing a good thing. Problem being
that fileRef "/foo" used to return ":./foo", which was actually wrong,
but as long as there was no foo in the local repository, catKey
could operate on it without crashing. After that fix though, fileRef
would return eg "../../foo", resulting in fileRef returning
":./../../foo", which will make git cat-file crash since that's
not a valid path in the repo.
Fix is simply to make fileRef detect paths outside the repo and return
Nothing. Then catKey can be skipped. This needed several bugfixes to
dirContains as well, in previous commits.
In Command.Smudge, this led to needing to check for Nothing. That case
should actually never happen, because the fileoutsiderepo check will
detect it earlier.
Sponsored-by: Brock Spratlen on Patreon
Disabling git-annex branch update for this command is
ok, because it does not use any information from the branch,
but only logs the location when it adds a key.
Sponsored-by: Dartmouth College's Datalad project
This should complete the fix started in
6329997ac4, fixing the actual cause of the
test suite failure this time.
Sponsored-by: Dartmouth College's Datalad project
The pass was needed to populate files when annex.thin was set,
but in commit 73e0cbbb19,
reconcileStaged started to do that. So, this second pass is not needed
any longer.
This makes git checkout and git merge hooks do the work to catch up with
changes that they made to the tree. Rather than doing it at some later
point when the user is not thinking about that past operation.
Sponsored-by: Dartmouth College's Datalad project
smudge: Fix a case where an unlocked annexed file that annex.largefiles
does not match could get its unchanged content checked into git, due to git
running the smudge filter unecessarily.
When the file has the same inodecache as an already annexed file,
we can assume that the user is not intending to change how it's stored in
git.
Note that checkunchangedgitfile already handled the inverse case, where the
file was added to git previously. That goes further and actually sha1
hashes the new file and checks if it's the same hash in the index.
It would be possible to generate a key for the file and see if it's the
same as the old key, however that could be considerably more expensive than
sha1 of a small file is, and it is not necessary for the case I have, at
least, where the file is not modified or touched, and so its inode will
match the cache.
git-annex add was changed, when adding a small file, to remove the inode
cache for it. This is necessary to keep the recipe in
doc/tips/largefiles.mdwn for converting from annex to git working.
It also avoids bugs/case_where_using_pathspec_with_git-commit_leaves_s.mdwn
which the earlier try at this change introduced.
Fix behavior of several commands, including reinject, addurl, and rmurl
when given an absolute path to an unlocked file, or a relative path that
leaves and re-enters the repository.
To avoid slowing down all the cases where the paths are already ok
with an unncessary call to getCurrentDirectory, put in an optimisation
in relPathCwdToFile. That will probably also speed up other parts of
git-annex by some small amount, but I have not benchmarked.
Note that I did not convert branchFileRef, because it seems likely that
it will be used with a file that is not provided by the user, so is already
in a sane format. This is certainly true for the way git-annex uses it,
though maybe arguable to the extent Git.Ref is a reusable library.
smudge: Fix a case where an unlocked annexed file that annex.largefiles
does not match could get its unchanged content checked into git, due to git
running the smudge filter unecessarily.
When the file has the same inodecache as an already annexed file,
we can assume that the user is not intending to change how it's stored in
git.
Note that checkunchangedgitfile already handled the inverse case, where the
file was added to git previously. That goes further and actually sha1
hashes the new file and checks if it's the same hash in the index.
It would be possible to generate a key for the file and see if it's the
same as the old key, however that could be considerably more expensive than
sha1 of a small file is, and it is not necessary for the case I have, at
least, where the file is not modified or touched, and so its inode will
match the cache.
34a535ebea broke the test suite.
Getting a file started failing in one case, because the annex object did
not have its inode cached, so was not trusted to be unmodified.
This adds something very similar to what was added to linkAnnex
in commit 2e9341a47d -- if there are not
yet any inodes cached for a key, add the inode of the annex object when
adding the inode of the unlocked file.
Feels like this should be handled in a more principled way. How
do we know the addInodeCaches call in getMoveRaceRecovery just above
this change is currently correct? It doesn't add the annex object inode
cache. Ah well, maybe sometime when I've not had my entire evening eaten
by a reversion that the test suite caught as I was cooking dinner.
Avoids the smudge --clean filter failing because URL keys do not support
genKey. Instead the modified content will be added using the default
backend.
This commit was sponsored by Jochen Bartl on Patreon.
This avoids the smudge --clean filter failing on the URL keys.
git checkout runs the post-checkout hook, which runs smudge --update.
That populates all the pointer files, but it neglected to store their inode
caches in the keys db. With that done, and the keys db flushed before
smudge --clean gets run (by restagePointerFile), the isUnmodifiedCheap
check can tell the file is not modified, so will not try to re-ingest it,
which does not work with URL keys because they do not support genKey.
It also seems possible that the isUnmodifiedCheap was also failing for
non-URL keys, which would cause them to be re-ingested, leading to a lot of
extra work. I have not verified that, but don't see why it wouldn't have
happened. So this probably also speeds up checking out adjusted branches.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Warn when adding a annex symlink or pointer file that uses a key that is
not known to the repository, to prevent confusion if the user has copied it
from some other repository.
This commit was sponsored by Jake Vosloo on Patreon.
Lots of nice wins from this in avoiding unncessary work, and I think
nothing got slower.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Fix a deadlock that could occur after git-annex got an unlocked file,
causing the command to hang indefinitely.
Known to happen on vfat filesystems, possibly others.
Note that a deadlock is still theoretically possible, if anything
smudge --clean does causes it to run the git queue for some other
reason.
Apparently that doesn't happen, but will need to keep an eye on it.
smudge: When annex.largefiles=anything, files that were already stored in
git, and have not been modified could sometimes be converted to being
stored in the annex. Changes in 7.20191024 made this more of a problem.
This case is now detected and prevented.
The git add behavior changes could be avoided if it turns out to be
really annoying, but then it would need to behave the old way when
annex.dotfiles=false and the new way when annex.dotfiles=true. I'd
rather not have the config option result in such divergent behavior as
`git annex add .` skipping a dotfile (old) vs adding to annex (new).
Note that the assistant always adds dotfiles to the annex.
This is surprising, but not new behavior. Might be worth making it also
honor annex.dotfiles, but I wonder if perhaps some user somewhere uses
it and keeps large files in a directory that happens to begin with a
dot. Since dotfiles and dotdirs are a unix culture thing, and the
assistant users may not be part of that culture, it seems best to keep
its current behavior for now.
git-annex find is now RawFilePath end to end, no string conversions.
So is git-annex get when it does not need to get anything.
So this is a major milestone on optimisation.
Benchmarks indicate around 30% speedup in both commands.
Probably many other performance improvements. All or nearly all places
where a file is statted use RawFilePath now.
Adds a dependency on filepath-bytestring, an as yet unreleased fork of
filepath that operates on RawFilePath.
Git.Repo also changed to use RawFilePath for the path to the repo.
This does eliminate some RawFilePath -> FilePath -> RawFilePath
conversions. And filepath-bytestring's </> is probably faster.
But I don't expect a major performance improvement from this.
This is mostly groundwork for making Annex.Location use RawFilePath,
which will allow for a conversion-free pipleline.
This will speed up the common case where a Key is deserialized from
disk, but is then serialized to build eg, the path to the annex object.
Previously attempted in 4536c93bb2
and reverted in 96aba8eff7.
The problems mentioned in the latter commit are addressed now:
Read/Show of KeyData is backwards-compatible with Read/Show of Key from before
this change, so Types.Distribution will keep working.
The Eq instance is fixed.
Also, Key has smart constructors, avoiding needing to remember to update
the cached serialization.
Used git-annex benchmark:
find is 7% faster
whereis is 3% faster
get when all files are already present is 5% faster
Generally, the benchmarks are running 0.1 seconds faster per 2000 files,
on a ram disk in my laptop.
Added annex.gitaddtoannex configuration. Setting it to false prevents
git add from usually adding files to the annex.
(Unless the file was annexed before, or a renamed annexed file is detected.)
Currently left at true; some users are encouraging it be set to false.
Renamed unlocked files are now detected, and will always be
annexed, unless annex.largefiles disallows it.
This allows for git add's behavior to later be changed to otherwise
not annex files (whether by default or as a config option), without
worrying about the rename case.
This is not a major behavior change; annexing is still the default. But
there is one case where the behavior is changed, I think for the better:
touch f
git -c annex.largefiles=nothing add f
git add bigfile
git commit -m ...
mv bigfile f
git add f
Before, git-annex would see that f was previously not annexed,
and so the renamed bigfile content gets added to git. Now, it notices
that the inode is the one that bigfile used, and so it annexes it.
This potentially slows down git add a lot in some repositories because
of the poor performance of isInodeKnown when there are a lot of unlocked
files. Configuring annex.largefiles avoids the speed hit.
No behavior changes, but this shows everywhere that a progress meter
could be displayed when hashing a file to add to the annex.
Many of the places don't make sense to display a progress meter though,
eg when importing the copy of the file probably swamps the hashing of
the file.
Fixes bug that caused git-annex to fail to add a file when another
git-annex process cleaned up the temp directory it was using.
Solution is just to push withOtherTmp out to a higher level, so that
the whole ingest process can be completed inside it.
But in the assistant, that was not practical to do, since withOtherTmp runs
in the Annex monad and the assistant does not. Worked around by introducing
a separate temp directory that only the assistant uses for lockdown.
Since only one assistant can run at a time, it's easy to clean up that
directory of old cruft at startup.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
Now there's a ByteString used all the way from disk to Key.
The main complication in this conversion was the use of fromInternalGitPath
in several places to munge things on Windows. The things that used that
were changed to parse the ByteString using either path separator.
Also some code that had read from files to a String lazily was changed
to read a minimal strict ByteString.
Cache high-resolution mtimes for improved detection of modified files in v7
(and direct mode).
Including on Windows.
With back-compat support so old low-res mtimes won't break anything, and
so the new information also won't break old versions of git-annex.
Install new git hooks in this version.
This does beg the question of what to do if git later gets eg a
post-smudge hook, that could run git-annex smudge --update. I think the
thing to do in that case would be to make git-annex smudge --update
install the new hooks. That way, as the user uses git-annex, the hook
would be created pretty quickly and without needing any extra syscalls
except for when git-annex smudge --update is called.
I considered doing something like that for installation of the
post-checkout and post-merge hooks, which would have avoided the need
for v7. But the only place it was cheap to do it would be in git-annex smudge
which could cheaply notice that smudge.log didn't exist yet and so know
the hooks needed to be installed. But since smudge used to populate pointer
files, it would be quite surprising if a single git checkout/merge failed
to update the work tree, and so that idea didn't work out.
The other reason for v7 is psychological -- users don't need to worry
about whether they might be running an old version of git-annex that
doesn't support their v7 repository very well. And bug reports about
"v6" have gotten a bit of a bad association in my head since they often
hit one of the known limitations and didn't realize it was experimental.
newtyped RepoVersion Int to avoid needing 2 comparisons in
versionSupportsUnlockedPointers etc. Also it's just nicer.
This commit was sponsored by John Pellman on Patreon.
Usually, git won't run clean filter when a file is unmodified. But, when
git checkout runs git annex smudge --update, it populates the pointer
runs git update-index, which sees the file has changed and runs
git annex smudge --clean, which was checksumming the file unncessarily
as it re-ingested it.
With annex.thin set, this is the difference between git checkout of a
branch with a 1 gb file taking 30s and 0.1s.
This commit was sponsored by Brett Eisenberg on Patreon.
* init, upgrade: Install git post-checkout and post-merge hooks that run
git annex smudge --update.
* precommit: Run git annex smudge --update, because the post-merge
hook is not run when there is a merge conflict. So the work tree will
be updated when a commit is made to resolve the merge conflict.
* precommit: Run git annex smudge --update, because the post-merge
hook is not run when there is a merge conflict. So the work tree will
be updated when a commit is made to resolve the merge conflict.
* Note that git has no hooks run after git stash or git cherry-pick,
so the user will have to manually run git annex smudge --update
after such commands.
Nothing currently installs the hooks into v6 repos that already exist.
Something will need to be done about that, either move this behavior to v7,
or document that the user will need to manually fix up their v6 repos.
This commit was sponsored by Eric Drechsel on Patreon.
The smuge filter no longer provides git with annexed file content, to
avoid a git memory leak, and because that did not honor annex.thin.
git annex smudge --update has to be run after a checkout to update
unlocked files in the working tree with annexed file contents.
No hooks yet to run it.
This commit was sponsored by Nick Piper on Patreon.
v6: When annex.largefiles is not configured for a file, running git add or
git commit, or otherwise using git to stage a file will add it to the annex
if the file was in the annex before, and to git otherwise. This is to avoid
accidental conversion.
Note that git-annex add's behavior has not changed, for reasons explained
in the added comment.
Performance: No added overhead when annex.largefiles is configured.
When not configured, there is an added call to catObjectMetaData,
which involves a round trip through git cat-file --batch.
However, the earlier catKeyFile primes the cache for it.
This commit was supported by the NSF-funded DataLad project.
Last of the known v6 races.
This also makes git add of a pointer file populate it when its content
is present in the annex. Which makes sense to do, I think.
This commit was supported by the NSF-funded DataLad project.