When there are multiple urls for a file, still treat it as being present
in the web when some urls don't work, as long as at least one url does
work.
This is consistent with the other web methods handling of multiple urls.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Actual problem is the keyName was set to "Ref \"sha\"", which led to
this follow-on failure since it contained a space.
The bad data would also get into the export database when exporting to a
non-external special remote. Looking briefly at that, I don't think the bad
data will lead to anything more than a re-upload of the file content
now that the problem has been fixed.
This commit was sponsored by Peter Hogg on Patreon.
Windows: Fix reversion that caused the path used to link to annexed
content include the drive letter and full path, rather than being
relative. (`git annex fix` will fix up after this problem).
I've not identified the commit that brought the reversion (probably it
happened this spring when I was removing MisingH and last touched
Utility.Path). Likely commit 18b9a4b8024115db67ae309fdaf54e1553037529?
The problem is that relPathDirToFile got called two paths that had the
slashes different ways around. Since takeDrive includes the first slash,
this made two paths on the same drive seem different and it bailed.
(ifdefs around this to avoid doing extra work on non-windows)
This commit was sponsored by Jack Hill on Patreon.
This avoids all the complication about redundant work discussed in
the previous try at fixing this. At the expense of needing each command
that could have the problem to be patched to simply wrap the action in
onlyActionOn once the key is known. But there do not seem to be many
such commands.
onlyActionOn' should not be used with a CommandStart (or CommandPerform),
although the types do allow it. onlyActionOn handles running the whole
CommandStart chain. I couldn't immediately see a way to avoid mistken
use of onlyActionOn'.
This commit was supported by the NSF-funded DataLad project.
After a false start, I found a fairly non-intrusive way to deal with it.
Although it only handles transfers -- there may be issues with eg
concurrent dropping of the same key, or other operations.
There is no added overhead when -J is not used, other than an added
inAnnex check. When -J is used, it has to maintain and check a small
Set, which should be negligible overhead.
It could output some message saying that the transfer is being done by
another thread. Or it could even display the same progress info for both
files that are being downloaded since they have the same content. But I
opted to keep it simple, since this is rather an edge case, so it just
doesn't say anything about the transfer of the file until the other
thread finishes.
Since the deferred transfer action still runs, actions that do more than
transfer content will still get a chance to do their other work. (An
example of something that needs to do such other work is P2P.Annex,
where the download always needs to receive the content from the peer.)
And, if the first thread fails to complete a transfer, the second thread
can resume it.
But, this unfortunately means that there's a risk of redundant work
being done to transfer a key that just got transferred.
That's not ideal, but should never cause breakage; the same
thing can occur when running two separate git-annex processes.
The get/move/copy/mirror --from commands had extra inAnnex checks added,
inside the download actions. Without those checks, the first thread
downloaded the content, and then the second thread woke up and
downloaded the same content redundantly.
move/copy/mirror --to is left doing redundant uploads for now. It
would need a second checkPresent of the remote inside the upload
to avoid them, which would be expensive. A better way to avoid
redundant work needs to be found..
This commit was supported by the NSF-funded DataLad project.
git annex add, git annex lock etc make multiple seek passes,
and each seek pass checked that files existed. That was unncessary
redundant work.
Fixed by adding a new WorkTreeItem type, make seek actions use it,
and check that the files exist when constructing it.
This commit was supported by the NSF-funded DataLad project.
Before, there was a window where interrupting an add could result in the
file being moved into the annex, with no symlink yet created.
This commit was supported by the NSF-funded DataLad project.
when storing files there, since that collection is created by initremote.
(This seems to work around some brokenness of the box.com webdav server
which was entering a redirect loop.)
Note that the fix makes locationParent return Nothing instead of "."
when there's no parent directory between the path and the top of the webdav
repo.
This commit was sponsored by André Pereira on Patreon.
Fix process and file descriptor leak that was exposed when git-annex was
built with ghc 8.2.1. Apparently ghc has changed its behavior of GC
of open file handles that are pipes to running processes. That
broke git-annex test on OSX due to running out of FDs.
Audited for all uses of Annex.new and made stopCoProcesses be called
once it's done with the state. Fixed several places that might have
leaked in other situations than running the test suite.
This commit was sponsored by Ewen McNeill.
Using annexeval to run probeCrippledFileSystem' caused Git.CurrentRepo.get
to be run. Fixed easily since probeCrippledFileSystem' had no need to use
the Annex monad.
This commit was sponsored by Ethan Aubin.
Remove closed bugs and todos that were last edited or commented before 2017.
Command line used:
for f in $(grep -l '|done\]\]' -- *.mdwn); do d="$(echo "$f" | sed 's/.mdwn$//')"; if [ -z "$(git log --since=01-01-2017 --pretty=oneline -- "$f")" -a -z "$(git log --since=01-01-2017 --pretty=oneline -- "$d")" ]; then git rm -- "./$f" ; git rm -rf "./$d"; fi; done
for f in $(grep -l '\[\[done\]\]' -- *.mdwn); do d="$(echo "$f" | sed 's/.mdwn$//')"; if [ -z "$(git log --since=01-01-2017 --pretty=oneline -- "$f")" -a -z "$(git log --since=01-01-2017 --pretty=oneline -- "$d")" ]; then git rm -- "./$f" ; git rm -rf "./$d"; fi; done
https://github.com/haskell/cabal/issues/4655
This means that when a module is conditionally imported via ifdef
depending on the OS or build flags, the cabal file has to mirror the
same logic there to only list the module then.
Since there are lots of OS's and lots of combinations of build flags
here, it's rather difficult to know if the cabal file has been completelty
correctly updated to match the source code.
So I am very unhappy with needing to update things in two places. I've
only tested this on linux with most build flags enables; this will
probably need significant time and testing to catch every cabal file
tweak that this change to Cabal requires. And it will be a continual
source of compile failures going forward when the code is modified and
the cabal file not also updated.
DRY DRY DRY, I repeat myself, but: DRY! Sigh..
(Also, had to remove all Build.* that are standalone programs from the
Other-Modules list, because since cabal passes those modules to ghc when
building git-annex, it complains that they use module Main. Those
modules are only used when building with the Makefile anyway, so this
change shouldn't break anything.)
This commit was sponsored by Thomas Hochstein on Patreon.
External special remotes will refuse to operate on keys with spaces in
their names. That has never worked correctly due to the design of the
external special remote protocol. Display an error message suggesting
migration.
Not super happy with this, but it's a pragmatic solution. Better than
complicating the external special remote interface and all external special
remotes.
Note that I only made it use SafeKey in Request, not Response. git-annex
does not construct a Response, so that would not add any safety. And
presumably, if git-annex avoids feeding any such keys to an external
special remote, it will never have a reason to make a Response using such a
key. If it did, it would result in a protocol error anyway.
There's still a Serializeable instance for Key; it's used by P2P.Protocol.
There, the Key is always in the final position, so it's ok if it contains
spaces.
Note that the protocol documentation has been fixed to say that the File
may contain spaces. One way that can happen, even though the Key can't,
is when using direct mode, and the work tree filename contains spaces.
When sending such a file to the external special remote the worktree
filename is used.
This commit was sponsored by Thom May on Patreon.
