push: When on an adjusted branch, propagate changes to parent branch before
updating export remotes.
This is a somewhat redundant call to propigateAdjustedCommits, since it
also gets called at pushLocal time. That other one needs to come after
importing from importtree remotes though, and seekExportContent has to come
earlier, so I don't see a way to avoid doing it twice.
Note that git-annex sync also manages to avoid the problem, it's only
git-annex push that had the bug.
Sponsored-by: Leon Schuermann on Patreon
Fix more breakage caused by git's fix for CVE-2022-24765, this time
involving a remote (either local or ssh) that is a repository not owned by
the current user.
Sponsored-by: Dartmouth College's DANDI project
Removed the prior code that checked for keys used by current versions of
the files being acted on. It is redundant with the associated files
check (so long as the associated files database is always up-to-date,
which reconcileStaged should accomplish).
Sponsored-by: Luke T. Shumaker on Patreon
The tricky thing about this turned out to be handling renames and reverts.
For that, it has to make two passes over the git log, and to avoid
buffering a possibly huge amount of logs in memory (ie the whole git log of
an entire repository!), runs git log twice.
(It might be possible to speed this up by asking git log to show a diff,
and so avoid needing to use catKey.)
Sponsored-By: Brock Spratlen on Patreon
Removed the dontCheck repoExists, because running it in a repo that has not
been initialized yet would update location log with nouuid. And I guess
it's ok for it to only support running in git-annex repos.
Avoid using curl when annex.security.allowed-ip-addresses is set but
neither annex.web-options nor annex.security.allowed-url-schemes is set to
a value that needs curl.
Bug introduced in 840bd50390
Sponsored-By: Brock Spratlen on Patreon
This is groundwork for making special remotes like borg be skipped by
sync when on an offline drive.
Added AVAILABILITY UNAVAILABLE reponse and the UNAVAILABLERESPONSE extension
to the external special remote protocol. The extension is needed because
old git-annex, if it sees that response, will display a warning
message. (It does continue as if the remote is globally available, which
is acceptable, and the warning is only displayed at initremote due to
remote.name.annex-availability caching, but still it seemed best to make
this a protocol extension.)
The remote.name.annex-availability git config is no longer used any
more, and is documented as such. It was only used by external special
remotes to cache the availability, to avoid needing to start the
external process every time. Now that availability is queried as an
Annex action, the external is only started by sync (and the assistant),
when they actually check availability.
Sponsored-by: Nicholas Golder-Manning on Patreon
Only display warning when git-annex sync (without --content or
--no-content) is used with repositories that have preferred content
configured.
Sponsored-by: Leon Schuermann on Patreon
I considered a more wide-ranging config option to make other commands
also show dead repositories. But it would be difficult to implement that
because Remote.keyLocations is used to get locations, filtering out dead
repos, and commands like get then try to use those locations. So a config
setting would make dead repos sometimes be acted on by commands.
Sponsored-by: unqueued on Patreon
Using == and != proved too hard to read, so went with [TRUE] and [FALSE]
after the term. I would kind of liked to have used emojis for a green
check and red X, but probably that is too fancy to be a good idea.
Make --explain output be inside [ ] with whitespace around them, to
avoid it ending with eg "[FALSE]]" and to make it easier to visually
find the start of it.
Sponsored-by: Dartmouth College's DANDI project
And annex.largefiles and annex.addunlocked.
Also git-annex matchexpression --explain explains why its input
expression matches or fails to match.
When there is no limit, avoid explaining why the lack of limit
matches. This is also done when no preferred content expression is set,
although in a few cases it defaults to a non-empty matcher, which will
be explained.
Sponsored-by: Dartmouth College's DANDI project
Currently it only displays explanations of options like --in and --copies.
In the future, it should explain preferred content expression evaluation
and other decisions.
The explanations of a few things could be better. In particular,
"standard" will just appear as-is (or as "!standard" if it doesn't
match), rather than explaining why the standard preferred content expression
for the group matches or not.
Currently as implemented, it goes to stdout, and so commands like
git-annex find that have custom output will not display --explain
information. Perhaps that should change, dunno.
Sponsored-by: Dartmouth College's DANDI project
Failure to remove is not treated as a problem, and no permissions
modifications are done, to avoid unexpected states.
Sponsored-by: Luke Shumaker on Patreon
* S3: Amazon S3 buckets created after April 2023 do not support ACLs,
so public=yes cannot be used with them. Existing buckets configured
with public=yes will keep working.
* S3: Allow setting publicurl=yes without public=yes, to support
buckets that are configured with a Bucket Policy that allows public
access.
Sponsored-by: Joshua Antonishen on Patreon
This causes changes to the original branch to get merged with a single
sync. Before, it took 2 syncs; the first happened to update the synced/
branch, and the second merged changes from the synced/ branch into the
ajusted branch.
Using mergeToAdjustedBranch when tomerge == origbranch is probably
overkill, but it does work fine.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
(And allow it to be used in the --template although that seems unlikely to
be very useful.)
My use case for this is that one of the podcast feeds I subscribe to is
sometimes leaking episodes of some other podcast. The other podcast is also
very close to spam, so this may be a form of intentional spamming. I have
not been able to catch the podcast feed containing those episodes, so I
don't know which one is at fault. So putting this in the metadata will let
me eventually catch it.
Bug fix: Re-running git-annex adjust or sync when in an adjusted branch
would overwrite the original branch, losing any commits that had been made
to it since the adjusted branch was created.
When git-annex adjust is run in this situation, it will display a warning
about the diverged branches.
When git-annex sync is run in this situation, mergeToAdjustedBranch
will merge the changes from the original branch to the adjusted branch.
So it does not need to display the divergence warning.
Note that for some reason, I'm needing to run sync twice for that to
happen. The first run does not do the merge and the second does. I'm unsure
why and so am not fully done with this bug.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
The paragraph just above already shows how to configure .gitattributes
and the necessary git config. So this is redundant. Also, it makes
.gitattributes match *, which is likely not a good idea because those
files are not likely to be all text files.
Running git config --list inside .git then fails, so better to only
do that when --git-dir was specified explicitly. Otherwise, when the
repository is not bare, run the command inside the working tree.
Also make init detect when the uuid it just set cannot be read and fail
with an error, in case git changes something that breaks this later.
I still don't actually understand why git-annex add/assist -J2 was
affected but -J1 was not. But I did show that it was skipping writing to
the location log, because the uuid was NoUUID.
Sponsored-by: Graham Spencer on Patreon
Command.Add.seek starts concurrency with CommandStages. And for
Command.Sync, it needs TransferStages. So, to get both types of concurrency
for the two different parts, it either needs to change the type of
concurrency in between, or just call startConcurrency once for each.
It seems safe enough to call startConcurrency twice, because it does shut
down concurrency (mostly) at the end, and eg the old Annex.workers get
emptied.
Sponsored-by: unqueued on Patreon
This ended up having an interface like sync, rather than like get/copy/drop.
That let it be implemented in terms of sync, which took a lot less code.
Also, it lets it handle many of the edge cases that sync does, such as
getting files that are not visible in a --hide-missing branch, and sending
files to exporttree remotes.
As well as being easier to implement, `git-annex satisfy myremote` makes
sense as it satisfies the preferred content settings of the remote.
`git-annex satisfy somefile` does not form a sentence that makes sense. So
while -C can be a little bit annoying, it still makes sense to have this
syntax.
Note that, while I initially thought this would also satisfy numcopies, it
does not. Arguably it ought to. But, sync does not send files in order to
satisfy numcopies, it only sends files to satisfy preferred content. And
it's important that this transfer the same files as sync does, because
it will probably be used in a workflow where the user sometimes syncs and
sometimes satisfies, and does not expect satisfy to do things that sync
would not do.
(Also opened a new bug that also affects sync et all, not only this command.)
Sponsored-by: Nicholas Golder-Manning on Patreon
This was already possible, but it was rather hard to come up with the
complex shell command needed.
Note that the diff output starts with "diff a/... b/...".
I left off the "--git" because it's not a git format diff.
