Running `git annex direct` would cause loss of data, because the object
was moved to a temp file, which it then tried to replace the work tree file
with, and on failure, the temp file got deleted. Now it's instead moved
back into the annex object location.
Minor because normally only 1 FD is leaked per git-annex run. However,
the test suite leaks a few hundred FDs, and this broke it on the Debian
autobuilders, which seem to have a tigher than usual ulimit.
The leak was introduced by the lazy getDirectoryContents' that was
introduced in e6330988dd in order to scale to
millions of journal files -- if the lazy list was never fully consumed, the
directory handle did not get closed.
Instead, pull in openDirectory/readDirectory/closeDirectory code that I
already developed and submitted in a patch to the haskell directory library
earlier. Using this in journalDirty avoids the place that the lazy list
caused a problem. And using it in stageJournal eliminates the need for
getDirectoryContents'.
The getJournalFiles* functions are switched back to using the regular
strict getDirectoryContents. I'm not sure if those always consume the whole
list, so this avoids any leak. And the things that call those are things
like git annex unused, which also look at every file committed to the
git-annex branch, so would need more work to scale to insane numbers of
files anyway.
When one side is an annexed symlink, and the other side is a non-annexed symlink.
In this case, git-merge does not replace the annexed symlink in the work
tree with the non-annexed symlink, which is different from it's handling of
conflicts between annexed symlinks and regular files or directories.
So, while git-annex generated the correct merge commit, the work tree
didn't get updated to reflect it.
See comments on bug for additional analysis.
Did not add this to the test suite yet; just unloaded a truckload of firewood
and am feeling lazy.
This commit was sponsored by Adam Spiers.
Eg after git-annex add has run on 2 million files in one go.
Slightly unhappy with the neeed to use a temp file here, but I cannot see
any other alternative (see comments on the bug report).
This commit was sponsored by Hamish Coleman.
Support users who have set commit.gpgsign, by disabling gpg signatures for
git-annex branch commits and commits made by the assistant.
The thinking here is that a user sets commit.gpgsign intending the commits
that they manually initiate to be gpg signed. But not commits made in the
background, whether by a deamon or implicitly to the git-annex branch.
gpg signing those would be at best a waste of CPU and at worst would fail,
or flood the user with gpg passphrase prompts, or put their signature on
changes they did not directly do.
See Debian bug #753720.
Also makes all commits done by git-annex go through a few central control
points, to make such changes easier in future.
Also disables commit.gpgsign in the test suite.
This commit was sponsored by Antoine Boegli.
When annex.genmetadata is set, metadata from the feed is added to files
that are imported from it.
Reused the same feedtitle and itemtitle, feedauthor, itemauthor, etc names
that are used in --template.
Also added title and author, which are the item title/author if available,
falling back to the feed title/author. These are more likely to be common
metadata fields.
(There is a small bit of dupication here, but once git gets
around to packing the object, it will compress it away.)
The itempubdate field is not included in the metadata as a string; instead
it is used to generate year and month fields, same as is done when adding
files with annex.genmetadata set.
This commit was sponsored by Amitai Schlair, who cooincidentially
is responsible for ikiwiki generating nice feed metadata!
http://marc.info/?l=git&m=140262402204212&w=2
This git bug manifested on FAT and Windows as the test suite failing in 3
places. All involved merge conflict resolution. It turned out that the
associated file mappings were getting messed up, and that happened because
this git bug lost track of what files were supposed to be symlinks.
This commit was sponsored by Eric Kidd.
Rather than calculating the TSDelta once, and caching it, this now
reads the inode sential file's InodeCache file once, and then each time a
new InodeCache is generated, looks at the sentinal file to get the current
delta.
This way, if the time zone changes while git-annex is running, it will
adapt.
This adds some inneffiency, but only on Windows, and only 1 stat per new
file added. The worst innefficiency is that `git annex status` and
`git annex sync` will now (on Windows) stat the inode sentinal file once per
file in the repo.
It would be more efficient to use getCurrentTimeZone, rather than needing
to stat the sentinal file. This should be easy to do, once the time
package gets my bugfix patch.
This commit was sponsored by Jürgen Lüters.
On Windows, changing the time zone causes the apparent mtime of files to
change. This confuses git-annex, which natually thinks this means the files
have actually been modified (since THAT'S WHAT A MTIME IS FOR, BILL <sheesh>).
Work around this stupidity, by using the inode sentinal file to detect if
the timezone has changed, and calculate a TSDelta, which will be applied
when generating InodeCaches.
This should add no overhead at all on unix. Indeed, I sped up a few
things slightly in the refactoring.
Seems to basically work! But it has a big known problem:
If the timezone changes while the assistant (or a long-running command)
runs, it won't notice, since it only checks the inode cache once, and
so will use the old delta for all new inode caches it generates for new
files it's added. Which will result in them seeming changed the next time
it runs.
This commit was sponsored by Vincent Demeester.
It was possible for a interrupted sync or merge in direct mode to
leave the work tree out of sync with the last recorded commit.
This would result in the next commit seeing files missing from the work
tree, and committing their removal.
Now, a direct mode merge happens not only in a throwaway work tree, but using
a temporary index file, and without any commits or index changes
being made until the real work tree has been updated. If the merge is
interrupted, the work tree may have some updated files, but worst case a
commit will redundantly commit changes that come from the merge.
This commit was sponsored by Tony Cantor.
There was a tricky bit here, when it does combine, the edit form is shown,
and so the info needs to be committed to the new repository, but then
pulled into the current one. And caches need to be invalidated for it
to be visible in the edit form.
Allow any encoding to be used, as with filenames (but utf8 is the sane
choice). Affects metadata and repository descriptions, and preferred
content expressions.
The question of what's the right encoding for the git-annex branch is a
vexing one. utf-8 would be a nice choice, but this leaves the possibility
of bad data getting into a git-annex branch somehow, and this resulting in
git-annex crashing with encoding errors, which is a failure mode I want to
avoid.
(Also, preferred content expressions can refer to filenames, and filenames
can have any encoding, so limiting to utf-8 would not be ideal.)
The union merge code already took care to not assume any encoding for a
file. Except it assumes that any \n is a literal newline, and not part of
some encoding of a character that happens to contain a newline. (At least
utf-8 avoids using newline for anything except liternal newlines.)
Adapted the git-annex branch code to use this same approach.
Note that there is a potential interop problem with Windows, since
FileSystemEncoding doesn't work there, and instead things are always
decoded as utf-8. If someone uses non-utf8 encoding for data on the
git-annex branch, this can lead to an encoding error on windows. However,
this commit doesn't actually make that any worse, because the union merge
code would similarly fail with an encoding error on windows in that
situation.
This commit was sponsored by Kyle Meyer.
To use, set GIT_ANNEX_SSHASKPASS to point to a fifo or regular file
(FIFO is better, avoids touching disk or multiple readers) that contains
the password. Then set SSH_ASKPASS=git-annex, and when ssh runs it, it will
tell ssh the password.
This is not yet used..
Only fsck and reinject and the test suite used the Backend, and they can
look it up as needed from the Key. This simplifies the code and also speeds
it up.
There is a small behavior change here. Before, all commands would warn when
acting on an annexed file with an unknown backend. Now, only fsck and
reinject show that warning.
For sync, saves 1 ssh connection per remote. For remotedaemon, the same
ssh connection that is already open to run git-annex-shell notifychanges
is reused to pull from the remote.
Only potential problem is that this also enables connection caching
when the assistant syncs with a ssh remote. Including the sync it does
when a network connection has just come up. In that case, cached ssh
connections are likely to be stale, and so using them would hang.
Until I'm sure such problems have been dealt with, this commit needs to
stay on the remotecontrol branch, and not be merged to master.
This commit was sponsored by Alexandre Dupas.
Motivation: Hook scripts for nautilus or other file managers
need to provide the user with feedback that a file is being downloaded.
This commit was sponsored by THM Schoemaker.
Note that this is a nearly entirely free feature. The data was already
stored in the metadata log in an easily accessible way, and already was
parsed to a time when parsing the log. The generation of the metadata
fields may even be done lazily, although probably not entirely (the map
has to be evaulated to when queried).
For example "standard or (include=otherdir/*)" or even "not standard"
Note that the implementation avoids any potential for loops (if a
standard preferred content expression itself mentioned standard).
This commit was sponsored by Jochen Bartl.
Old ssh did not check the hostname passed to -O stop, so I had used "any".
But now ssh does check it! I think this happened as part of the client-side
hostname canonicalization changes in 6.5p1, but have not verified that
introduced the problem.
The symptom was that it would try to dns lookup "any", which often caused a
bit of a delay at shutdown. And the old ssh connection kept running, so
it would do it over and over again.
Fixed by using localhost, which hopefully reliably resolves to some address
that ssh will accept.. Also nukeFile the socket after ssh has been asked to
shutdown, just in case.
unused: In direct mode, files that are deleted from the work tree are no longer incorrectly detected as unused.
Direct mode `git annex info` slows down a bit due to more stringent
checking, but not by a lot.
This is a new feature, it was not handled before, since it's a bit of an
edge case. However, it can be handled exactly the same as a file/dir
conflict, just leave the non-annexed item alone.
While implementing this, the core resolveMerge' function got a lot simpler
and clearer. Note especially that where before there was an asymetric call to
stagefromdirectmergedir, now graftin is called symmetrically in both cases.
And, in order to add that `graftin us`, the current branch needed to be
known (if there is no current branch, there cannot be a merge conflict).
This led to some cleanups of how autoMergeFrom behaved when there is no
current branch.
This commit was sponsored by Philippe Gauthier.
Added test cases for both ways this can happen, with a conflict involving a
file, or a directory.
Cleaned up resolveMerge to not touch the work tree in direct mode, which
turned out to be the only way to handle things.. And makes it much nicer.
Still need to run test suite on windows.
In the case of a conflicted merge where the remote adds a directory, and we
have a file (which is checked in), resolveMerge' will create the link,
and so the fix for 1192d98721 looked at that,
thought it was an unannexed file (it's not in the oldref), and preserved
it.
This is a hacky fix. It would be better for resolveMerge' to not update the
work tree, at least in direct mode, and only stage the changes, which
mergeDirectCleanUp could then move into tree. I want to make that change,
but this is not the time to do it.
Using the extract(1) program to do the heavy lifting.
Decided to make git-annex run pre-commit-annex when committing. Since
git-annex pre-commit also runs it, it'll be run when git commit is run too,
via the pre-commit hook. This basically gives back the pre-commit hook
that git-annex took away. The implementation avoids repeatedly looking
for the hook script when the assistant is running and committing
repeatedly; only checks if the hook is available once.
To make the script simpler, made git-annex metadata -s field?=value
only set a field when it's not already got a value.
This commit was sponsored by bak.
Note that negated globs are not supported. Would have complicated the code
to add them, without changing the data type serialization in a
non-backwards-compatable way.
This commit was sponsored by Denver Gingerich.
This allows eg, putting .git/annex/tmp on a ram disk, if the disk IO
of temp object files is too annoying (and if you don't want to keep
partially transferred objects across reboots).
.git/annex/misctmp must be on the same filesystem as the git work tree,
since files are moved to there in a way that will not work cross-device,
as well as symlinked into there.
I first wanted to put the tmp objects in .git/annex/objects/tmp, but
that would pose transition problems on upgrade when partially transferred
objects existed.
git annex info does not currently show the size of .git/annex/misctemp,
since it should stay small. It would also be ok to make something clean it
out, periodically.
Performance impact: When adding a large tree of new files, this needs
to do some git cat-file queries to check if any of the files already
existed and might need a metadata copy. I tried a benchmark in a copy
of my sound repository (so there was already a significant git tree
to check against.
Adding 10000 small files, with a cold cache:
before: 1m48.539s
after: 1m52.791s
So, impact is 0.0004 seconds per file added. Which seems acceptable, so did
not add some kind of configuration to enable/disable this.
This commit was sponsored by Lisa Feilen.
When constructing views, metadata is available about the location of the
file in the view's reference branch. Allows incorporating parts of the
directory hierarchy in a view.
For example `git annex view tag=* podcasts/=*` makes a view in the form
tag/showname.
Performance impact: I benchmarked git annex view tag=* in the conference
proceedings repo to take 6.459s before this change, and 6.544s after.
FWIW, I considered making the syntax for this be podcasts/*, which might
be easier for the user to learn. However, I think it's not as good:
* The user has to then juggle two different syntaxes, and podcasts/* will
be expanded by the shell so they also need to quote it, while podcasts/=*
is unlikely to be expanded by the shell.
* It would allow for things like podcasts/*/* and *.mp3 which do not
map well into views.
This commit was sponsored by Aurélien Pinceaux.
While writing this documentation, I realized that there needed to be a way
to stay in a view like tag=* while adding a filter like tag=work that
applies to the same field.
So, there are really two ways a view can be refined. It can have a new
"field=explicitvalue" filter added to it, which does not change the
"shape" of the view, but narrows the files it shows.
Or, it can have a new view added, which adds another level of
subdirectories.
So, added a vfilter command, which takes explicit values to add to the
filter, and rejects changes that would change the shape of the view.
And, made vadd only accept changes that change the shape of the view.
And, changed the View data type slightly; now components that can match
multiple metadata values can be visible, or not visible.
This commit was sponsored by Stelian Iancu.
So the user can now switch to a view and then move files around within it
to manage metadata. For example, moving a file into a new directory
when in the tags=* view adds a tag to it.
Implementation is fairly efficient. One diff-index, which is no more
expensive than the first stage of a git commit, followed by possibly
some cat-file --batch traffic to find the key (when deleting a file).
Very similar to what's done in direct mode when committing. And like
direct mode when updating the WC after a merge, it has to buffer the
diff-tree values in order to make 2 passes over them.
When not in a view, pre-commit now does one extra git symbolic-ref,
which is tiny overhead.
This commit was sponsored by Andrew Eskridge.
I was careful to write the code so its clear how laziness memoizes it,
although it's likely that much less explicit currying would have had
the same effect. Verified that the memoization works using a Debug.Trace.
Removed instance, got it all to build using fromRef. (With a few things
that really need to show something using a ref for debugging stubbed out.)
Then added back Read instance, and made Logs.View use it for serialization.
This changes the view log format.
(And a vpop command, which is still a bit buggy.)
Still need to do vadd and vrm, though this also adds their documentation.
Currently not very happy with the view log data serialization. I had to
lose the TDFA regexps temporarily, so I can have Read/Show instances of
View. I expect the view log format will change in some incompatable way
later, probably adding last known refs for the parent branch to View
or something like that.
Anyway, it basically works, although it's a bit slow looking up the
metadata. The actual git branch construction is about as fast as it can be
using the current git plumbing.
This commit was sponsored by Peter Hogg.
Promosing work toward metadata driven filter branches. A few methods
to construct them are stubbed out; all the data types and pure code
seems good.
This commit was sponsored by Walter Somerville.
Adds metadata log, and command.
Note that unsetting field values seems to currently be broken.
And in general this has had all of 2 minutes worth of testing.
This commit was sponsored by Julien Lefrique.
