On Windows, that does not support long paths
https://github.com/jacobstanley/unix-compat/issues/56
Instead, use System.Directory.renamePath, which does support long paths.
Sponsored-by: Dartmouth College's Datalad project
--backend is no longer a global option, and is only accepted by commands
that actually need it.
Three commands that used to support backend but don't any longer are
watch, webapp, and assistant. It would be possible to make them support it,
but I doubt anyone used the option with these. And in the case of webapp
and assistant, the option was handled inconsistently, only taking affect
when the command is run with an existing git-annex repo, not when it
creates a new one.
Also, renamed GlobalOption etc to AnnexOption. Because there are many
options of this type that are not actually global (any more) and get
added to commands that need them.
Sponsored-by: Kevin Mueller on Patreon
Some small wins, almost certianly swamped by the system calls, but still
worthwhile progress on the RawFilePath conversion.
Sponsored-by: Erik Bjäreholt on Patreon
When adding a small file, it does not get locked down, so can be modified
after git-annex checks that it's small. The use of queued git add made the
race window nice and wide too.
Fixed by checking if the file has changed, and by not using git add.
Instead, have to recapitulate git add's handling of things like symlinks
and executable files.
Sponsored-by: Jochen Bartl on Patreon
The remaining callers all did not rely on it checking gitignore, so were
easy to convert.
They were susceptable to the same overwrite race as add and fix,
although less likely to have it and a narrower window than add's race.
Command.Rekey in passing got an unncessary call to removeFile deleted.
addSymlink handles deleting any existing worktree file.
Similar to git-annex add, git-annex fix queued git add, so if a file
got modified before git add ran, the wrong content would be staged,
perhaps a large file content.
Sponsored-by: Brock Spratlen on Patreon
In the unlikely case where git-annex add is run on an annex symlink that
is not already added, and while it's processing it, the annex symlink is
overwritten with something else, avoid git-annex overwriting that with
the symlink again.
Sponsored-by: Jack Hill on Patreon
This is not a complete fix for all such races, only the one where a
large file gets changed while adding and gets added to git rather than
to the annex.
addLink needs to go away, any caller of it is probably subject to the
same kind of race. (Also, addLink itself fails to check gitignore when
symlinks are not supported.)
ingestAdd no longer checks gitignore. (It didn't check it consistently
before either, since there were cases where it did not run git add!)
When git-annex import calls it, it's already checked gitignore itself
earlier. When git-annex add calls it, it's usually on files found
by withFilesNotInGit, which handles checking ignores.
There was one other case, when git-annex add --batch calls it. In that
case, old git-annex behaved rather badly, it would seem to add the file,
but git add would later fail, leaving the file as an unstaged annex symlink.
That behavior has also been fixed.
Sponsored-by: Brett Eisenberg on Patreon
move: Improve resuming a move that succeeded in transferring the content,
but where dropping failed due to eg a network problem, in cases where
numcopies checks prevented the resumed move from dropping the object from
the source repository.
This was earlier done for moves that got interrupted during the drop stage.
Sponsored-by: Svenne Krap on Patreon
Use cases include using git-annex init --no-autoenable and then going back
and enabling the special remotes that have autoenable configured. As well
as just querying to remember which ones have it enabled.
It lists all special remotes that have autoenable=yes whether currently
enabled or not. And it can be used with --json.
I pondered making this "git-annex info autoenable", but that seemed wrong
because then if the use has a directory named "autoenable", it's unclear
what they are asking for. (Although "git-annex info remote" may be
similarly unclear.) Making it an option does mean that it can't be provided
via --batch though.
Sponsored-by: Dartmouth College's Datalad project
Someone may disagree with what repositories are set to autoenable and
it's good to have local overrides.
See https://github.com/datalad/datalad/issues/6634
Sponsored-by: Dartmouth College's Datalad project
The purpose of this is to fix situations where the annex object file is
stored in a directory structure other than where annex symlinks point to.
But it will also move object files from the hashdirmixed back to
hashdirlower if the repo configuration makes that the normal location.
It would have been more work to avoid that than to let it do it.
Sponsored-by: Dartmouth College's Datalad project
If the content directory does not exist, then it does not make sense to
lock the content file, as it also does not exist, and so it's ok for the
lock operation to fail.
This avoids potential races where the content file exists but is then
deleted/renamed, while another process sees that it exists and goes to
lock it, resulting in a dangling lock file in an otherwise empty object
directory.
Also renamed modifyContent to modifyContentDir since it is not only
necessarily used for modifying content files, but also other files in
the content directory.
Sponsored-by: Dartmouth College's Datalad project
None of the special remotes do it yet, but this lays the groundwork.
Added MustFinishIncompleteVerify so that, when an incremental verify is
started but not complete, it can be forced to finish it. Otherwise, it
would have skipped doing it when verification is disabled, but
verification must always be done when retrievin from export remotes
since files can be modified during retrieval.
Note that retrieveExportWithContentIdentifier doesn't support incremental
verification yet. And I'm not sure if it can -- it doesn't know the Key
before it downloads the content. It seems a new API call would need to
be split out of that, which is provided with the key.
Sponsored-by: Dartmouth College's Datalad project
Ignore annex.numcopies set to 0 in gitattributes or git config, or by
git-annex numcopies or by --numcopies, since that configuration would make
git-annex easily lose data. Same for mincopies.
This is a continuation of the work to make data only be able to be lost
when --force is used. It earlier led to the --trust option being disabled,
and similar reasoning applies here.
Most numcopies configs had docs that strongly discouraged setting it to 0
anyway. And I can't imagine a use case for setting to 0. Not that there
might not be one, but it's just so far from the intended use case of
git-annex, of managing and storing your data, that it does not seem like
it makes sense to cater to such a hypothetical use case, where any
git-annex drop can lose your data at any time.
Using a smart constructor makes sure every place avoids 0. Note that this
does mean that NumCopies is for the configured desired values, and not the
actual existing number of copies, which of course can be 0. The name
configuredNumCopies is used to make that clear.
Sponsored-by: Brock Spratlen on Patreon
add: Avoid unncessarily converting a newly unlocked file to be stored
in git when it is not modified, even when annex.largefiles does not
match it.
This fixes a reversion in version 10.20220222, where git-annex unlock
followed by git-annex add, followed by git commit file could result in
git thinking the file was modified after the commit.
I do have half a mind to remove the withUnmodifiedUnlockedPointers part
of git-annex add. It seems weird, despite that old bug report arguing
a case of consistency that it ought to behave that way. When git-annex
add surpises me, it seems likely it's wrong.. But for now, this is the
smallest possible fix.
Sponsored-by: Dartmouth College's Datalad project
The patch that removed it did not break anything, since the strings it's
used on are all ASCII not unicode. But I like making sure to use
packString everywhere just in case the code later changes in a way that
needs it.
In aeson 2.0, Text has been replaced by the Key type and HashMap by the
KeyMap interface. Accomodating this required adding some CPP in order to
still be able to compile with aeson < 2.0. The required changes were:
* Prevent Key from being re-exported by Utilities.Aeson, as it clashes
with git-annex's own Key type.
* Fix up convertion from String/Text to Key (or Text in aeson 1.*) in a
couple of places
* Import Data.Aeson.KeyMap instead of Data.HashMap.Strict, as they are
mostly API-compatible. insertWith needs to be replaced by unionWith,
however, as KeyMap lacks the former function.
It will then proceed to add the file the same as if it were any other
file containing possibly annexable content. Usually the file is one that
was annexed before, so the new, probably corrupt content will also be added
to the annex. If the file was not annexed before, the content will be added
to git.
It's not possible for the smudge filter to throw an error here, because
git then just adds the file to git anyway.
Sponsored-by: Dartmouth College's Datalad project
A few places were reading the max symlink size of a pointer file,
then passing tp parseLinkTargetOrPointer. Which is fine currently, but
to support pointer files with lines of data after the pointer, enough
has to be read that parseLinkTargetOrPointer can be assured of seeing
enough of that data to know if it's correctly formatted.
Sponsored-by: Dartmouth College's Datalad project
File matching options like --include will be rejected in situations where
there is no filename to match against. (Or where there is a filename but
it's not relative to the cwd, or otherwise seemed too bothersome to match
against.)
The addition of listKeys' was necessary to avoid using more memory in the
common case of "git-annex info". Adding a filterM would have caused the
list to buffer in memory and not stream. This is an ugly hack, but listKeys
had previously run Annex operations inside unafeInterleaveIO (for direct
mode). And matching against a matcher should hopefully not change any Annex
state.
This does allow for eg `git-annex info somefile --include=*.ext`
although why someone would want to do that I don't really know. But it
seems to make sense to allow it.
But, consider: `git-annex info ./somefile --include=somefile`
This does not match, so will not display info about somefile.
If the user really wants to, they can `--include=./somefile`.
Using matching options like --copies or --in=remote seems likely to be
slower than git-annex find with those options, because unlike such
commands, info does not have optimised streaming through the matcher.
Note that `git-annex info remote` is not the same as
`git-annex info --in remote`. The former shows info about all files in
the remote. The latter shows local keys that are also in that remote.
The output should make that clear, but this still seems like a point
where users could get confused.
Sponsored-by: Jochen Bartl on Patreon
This avoids a later git status or similar taking a long time to run
as it runs git-annex smudge once per file. While v9 repositories do
avoid that taking long when the files are small, large files can still
make git status take a very long time.
This does make unlock slower, because now git-annex smudge is being run
once per file unlocked. However, the next commit should speed that up in
many cases.
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
* registerurl, unregisterurl: Improved output when reading from stdin
to be more like other batch commands.
* registerurl, unregisterurl: Added --json and --json-error-messages options.
Note that this did change the --batch output in a way that could possibly
break something that expected the old output to never change. I think it's
acceptable to break that because there has never been a guarantee of
unchanging output format except with --batch for most commands. The old
output was just really weird too!
One possible wart is that "git-annex registerurl" with no options now
seems to just hang, since it's waiting for stdin input. Before, it said
"registerurl (stdin)" which was clearer about what's happenening. But this
is a deprecated mode anyway, --batch makes clear what's happening. If
anything, this problem would be a reason to eventually remove the support
for reading from stdin w/o --batch.
Sponsored-by: Dartmouth College's Datalad project
Reject combinations of --batch (or --batch-keys) with options like --all or
--key or with filenames.
Most commands ignored the non-batch items when batch mode was enabled.
For some reason, addurl and dropkey both processed first the specified
non-batch items, followed by entering batch mode. Changed them to also
error out, for consistency.
Sponsored-by: Dartmouth College's Datalad project
Before it would pick one at random, though preferring ones that were not
dead over dead ones.
Now, if one is dead and the other not, it will use the non-dead one. But if
both are not dead, or both dead, it will error out, suggesting the user
clarify what they want to enable.
Sponsored-by: Luke Shumaker on Patreon
So that importing does not replace them with plain files.
This works similarly to how the previous handling of submodules and
matchers did, except that annexed symlinks still get exported as plain
files of course, it's only non-annexed symlinks that it does not make sense
to export.
When symlinks have previously been exported, updating the export will
unexport them after upgrading to this commit.
Sponsored-by: Kevin Mueller on Patreon
Started in 2017 in commit 3fe9d99f24.
Starting tomorrow, all versions of git-annex since then will provide
an appid, and so it will no longer be necessary to check the date.
Sponsored-by: Nicholas Golder-Manning on Patreon
Capstone to this feature. Any transitions that have been performed on an
unmerged remote ref but not on the local git-annex branch, or vice-versa
have to be applied on the fly when reading files.
Sponsored-by: Dartmouth College's Datalad project
It would display incomplete information, which would differ from the
information displayed with write access. So refuse to display anything.
Sponsored-by: Dartmouth College's Datalad project
It would be difficult to make Annex.Branch.files query the unmerged
git-annex branches. Might be possible, similar to what was discussed in
7f6b2ca49c but again I decided to make it
not do anything in that situation to start with before adding such a
complicated thing.
git-annex info uses it when getting info about a repostory. The choices
were to make that fail with an error, or display the info it can, and
change the output slightly for the bits of info it cannot access. While
that is a behavior change, and I want to avoid any behavior changes due
to unmerged git-annex branches in a read-only repo, displaying a message
that is not a number seems unlikely to break anything that was consuming
a number, any worse than throwing an exception would. Probably.
Also git-annex unused --from origin is made to throw an error, but
it would fail later anyway when trying to write to the unused log files.
Sponsored-by: Dartmouth College's Datalad project
This makes --all error out in that situation. Which is better than
ignoring information from the branches.
To really handle the branches right, overBranchFileContents would need
to both query all the branches and union merge file contents
(or perhaps not provide any file content), as well as diffing between
branches to find files that are only present in the unmerged branches.
And also, it would need to handle transitions..
Sponsored-by: Dartmouth College's Datalad project
sync: Better error message when unable to export to a remote because
remote.name.annex-tracking-branch is configured to a ref that does not
exist.
It does not suggest how to fix the problem because there are several
possible solutions: Change the git config to point to something that does
exist, git add some files, or put files on the special remote that will be
imported and so populate the ref.
I considered just silently not doing anything, which is what it does
when annex-tracking-branch = master and nothing has been committed to
master yet. But it seems better to be explicit about it, since this is a
fairly confusing situation to find yourself in.
Sponsored-By: Max Thoursie on Patreon
Commit b6e4ed9aa7 made non-annexed files
be re-uploaded every time, since they're not tracked in the location log,
and it made it check the location log. Don't do that for non-annexed files.
Sponsored-by: Brock Spratlen on Patreon
