This is built when building Setuo, and after
54ad1b4cfb, such modules cannot import
Utility.Directory, because it depends on unix, which is not in
setup-depends. This module only needs System.Directory, so import
Utility.SystemDirectory instead.
Sponsored-by: Dartmouth College's Datalad project
Works around this bug in unix-compat:
https://github.com/jacobstanley/unix-compat/issues/56
getFileStatus and other FilePath using functions in unix-compat do not do
UNC conversion on Windows.
Made Utility.RawFilePath use convertToWindowsNativeNamespace to do the
necessary conversion on windows to support long filenames.
Audited all imports of System.PosixCompat.Files to make sure that no
functions that operate on FilePath were imported from it. Instead, use
the equvilants from Utility.RawFilePath. In particular the
re-export of that module in Common had to be removed, which led to lots
of other changes throughout the code.
The changes to Build.Configure, Build.DesktopFile, and Build.TestConfig
make Utility.Directory not be needed to build setup. And so let it use
Utility.RawFilePath, which depends on unix, which cannot be in
setup-depends.
Sponsored-by: Dartmouth College's Datalad project
AbsRel depends on unix, but Utility.Path.Windows will be used in some
libraries that are part of the setup-depends, which cannot depend on
unix.
The only reason that AbsRel uses getWorkingDirectory on unix is that
it returns RawFilePath. getCurrentDirectory returns FilePath and so
needs a conversion to RawFilePath. Looks like a newer version of
directory will fix that, by using OsPath, so eventually AbsPath should
be able to switch to using getCurrentDirectory on unix, and then the
small code duplication in this commit won't be needed.
Sponsored-by: Dartmouth College's Datalad project
As far as I can see, git-annex status was added to support direct mode, and
like other things added for that, it ought to be deprecated.
Behavior is similar to git status --short, though not identical in a few
cases eg renamed files.
I think datalad does not use this command, although it might have in the
past. Could not find any use of it in the current datalad code.
A deprecation warning at runtime would be the next step, probably will wait
and do that for all the deprecated commands together (except findref).
Well, perhaps it could be documented better, but it's a compositional
feature so users who need it will probably try it and be happy to find
that it works.
Rather than entering a view of the adjusted branch, enter an adjusted
view branch. This way, it's the same as first using git-amnnex view
followed by git-annex adjust, and everything already implemented to
support that works.
Sponsored-by: Nicholas Golder-Manning on Patreon
I had thought this would not make sense to combine with view branches,
since removing files from a view changes metadata.
However, that's committing removal of files. With --hide-missing, the
files get removed when git-annex updates the branch itself, so there is
no conflict.
It does not seem likely to be very useful, but it does work! And that's
nice because it means all types of adjusted branches can be combined with
view branches.
Sponsored-by: Max Thoursie on Patreon
When generating the view, check if the key is present.
When syncing in a view branch with an adjustment, run adjustedBranchRefreshFull
the same as is done when syncing in other adjusted branches. This is
needed because the docs for git-annex adjust --unlock-present suggest
using git-annex sync to update the branch when annex.adjustedbranchrefresh
is not set.
Note that, with annex.adjustedbranchrefresh set, it just works! The
adjusted branch gets updated in the usual way and it doesn't matter that
there's a view branch underneath.
And of course, re-running git-annex adjut --unlock-present also works,
as suggested in the docs.
Sponsored-by: Erik Bjäreholt on Patreon
Just make pointer files rather than symlinks, easy.
As for the other adjustments:
--lock is the default for views
--fix happens automatically in views
--hide-missing probably does not make sense when combined with views,
because deleting a file from a view removes metadata
--unlock-present will need a bit more work
An adjusted view branch has a name like
"refs/heads/adjusted/views/master(author=_)(unlocked)", so it is a view
branch that has been converted to an adjusted branch.
Made Logs.View support such branch names. So now git-annex sync and
pre-commit handle updating metadata on commit in such a branch.
Much remains to be done to fully support adjusted view branches,
including actually applying the adjustment when updating the view branch.
Sponsored-by: Graham Spencer on Patreon
When git-annex adjust is run in a view branch, and the adjusted branch
already exists, overwrite the old adjusted branch with the new one
without being forced.
Usually overwriting an adjusted branch is avoided because it could lose
data. But when a view branch has been adjusted, there is no data to lose
in the adjusted branch, because the only changes that can be made of
significance are to move files between directories. Which changes
metadata on commit. And the old branch has already been committed.
Sponsored-by: Lawrence Brogan on Patreon
An adjusted view branch has a name like
"adjusted/views/master(author=_)(unlocked)"
and so the adjustment starts at the last open paren, not the first open
paren.
Note that git-annex sync still does not do anything useful when run in
such a branch, because it does not realize that it is a view branch.
This is only groundwork for adjusted view branches.
This also fixes adjusted branches when the basis branch name contains
parens for some other reason, though that is not common in a git branch
name.
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
Old message was:
sqlite query crashed: thread blocked indefinitely in an MVar operation
New message is eg:
sqlite worker thread crashed: SQLite3 returned ErrorCan'tOpen while attempting to perform open ".git/annex/keysdb/db".
The worker thread used to throw an exception. But before that
exception was seen by anything waiting on the worker thread to
finish, the takeMVar in queryDb would have crashed with
BlockedIndefinitelyOnMVar.
Sponsored-by: k0ld on Patreon
git-annex.cabal: Move webapp build deps under the Assistant build flag so
git-annex can be built again without yesod etc installed.
Commit 78440ca37d got rid of the webapp build
flag to work around what was apparently a cabal bug. It moved the webapp
build deps to the main build-depends list. But that prevents building
git-annex when yesod etc are not installed.
Putting them under the Assistant build flag seems to not tickle that cabal
bug, and lets git-annex build automatically with the assistant disabled
when the webapp build deps are not installed.
I hypotehesize that the problem may have involved build-depends nested
behind two build flags. Also, cabal clean may need to be run in order
for cabal to find the right solution after this change, when building in
a directory where cabal configure had been run before.
Also moved 3 modules that are needed to build git-annex w/o the assistant
out from under the Assistant build flag.
Sponsored-by: Brock Spratlen on Patreon
This reverts commit 648e59cac2.
Failed to build on windows, because
In the dependencies for haskeline-0.8.2:
Win32-2.11.1.0 from Stack configuration does not match >=2.1 && <2.10 || >=2.12 (latest
matching version is 2.13.4.0)
jkniiv did find a solution that builds:
-- Win32-2.11.1.0
+- Win32-2.9.0.0
+- Cabal-3.6.3.0
+- directory-1.3.7.1
+- process-1.6.17.0
+- time-1.11.1.2
But that is a quite old version of Win32 and risks bugs from it, and bumping
Cabal and directory to newer than lts-19.33 has seems also likely to be risky.
So, I've given up. aws-0.24 won't be able to be in the stack build until
there's a stackage lts (or nightly) that has filepath (>=1.4.100.0),
which will not happen until sometime after the next ghc release.
info: Fix reversion in last release involving handling of unsupported input
by continuing to handle any other inputs, before exiting nonzero at the
end.
Sponsored-by: Dartmouth College's Datalad project
