The parser and looking up config keys in the map should both be faster
due to using ByteString.
I had hoped this would speed up startup time, but any improvement to
that was too small to measure. Seems worth keeping though.
Note that the parser breaks up the ByteString, but a config map ends up
pointing to the config as read, which is retained in memory until every
value from it is no longer used. This can change memory usage
patterns marginally, but won't affect git-annex.
While L.toStrict copies, profiling showed it was only around 0.3% of
git-annex find runtime. Does not seem worth optimising that, which would
probably involve either a major refactoring, or a use of
UnsafeInterleaveIO.
Also, it seems to me that the latter would need to read chunks, and
preappend the leftover part to the next chunk. But a strict ByteString
append itself is a copy, so I'm not convinced that would be faster than
L.toStrict.
Finally builds (oh the agoncy of making it build), but still very
unmergable, only Command.Find is included and lots of stuff is badly
hacked to make it compile.
Benchmarking vs master, this git-annex find is significantly faster!
Specifically:
num files old new speedup
48500 4.77 3.73 28%
12500 1.36 1.02 66%
20 0.075 0.074 0% (so startup time is unchanged)
That's without really finishing the optimization. Things still to do:
* Eliminate all the fromRawFilePath, toRawFilePath, encodeBS,
decodeBS conversions.
* Use versions of IO actions like getFileStatus that take a RawFilePath.
* Eliminate some Data.ByteString.Lazy.toStrict, which is a slow copy.
* Use ByteString for parsing git config to speed up startup.
It's likely several of those will speed up git-annex find further.
And other commands will certianly benefit even more.
Goal is to make git-annex faster by using ByteString for all the
worktree traversal. For now, this is focusing on Command.Find,
in order to benchmark how much it helps. (All other commands are
temporarily disabled)
Currently in a very bad unbuildable in-between state.
Eg:
git clone url --bare r
git --git-dir r annex init
This resulted in worktree = Just "." and so several things that check
worktree to determine when the repo is bare ran code paths intended for
non-bare. One such code path[1] ran git checkout with --worktree=. which
actually makes it ignore core.bare config, and so the current directory
got populated with a checkout of the master branch in this example. There
was probably also other breakage.
The fix is a bit complicated because whether the repo is bare is not
known until after Git.Config reads the config, but Git.Config handles
setting the RepoLocations's worktree when core.worktree is set. So have
to assume the worktree is the cwd, let core.worktree override that,
and then if the repo turns out to be bare, it's set back to Nothing.
(And then GIT_WORK_TREE can still override all of that.)
[1] switchHEADBack, which runs even when the clone is not from a bare repo.
* git-lfs: The url provided to initremote/enableremote will now be
stored in the git-annex branch, allowing enableremote to be used without
an url. initremote --sameas can be used to add additional urls.
* git-lfs: When there's a git remote with an url that's known to be
used for git-lfs, automatically enable the special remote.
Rescued from commit 11d6e2e260 which removed
db benchmarks in favor of benchmarking arbitrary git-annex commands. Which
is nice and general, but microbenchmarks are useful too.
Work around git cat-file --batch's odd stripping of carriage return from
the end of the line (some windows infection), avoiding crashing when the
repo contains a filename ending in a carriage return.
debian oldoldstable has 2.1, and that's what i386ancient uses. It would be
better to require git 2.2, which is needed to use adjusted branches, but
can't do that w/o losing support for some old linux kernels or a
complicated git backport.
This typo would make "git cat-file cat-file" fail, and the way it's used,
I think it broke querying all info from filenames containing newlines,
because the other queries are only run when it succeeds.
Drop support for building with ghc older than 8.4.4, and with older
versions of serveral haskell libraries than will be included in Debian 10.
The only remaining version ifdefs in the entire code base are now a couple
for aws!
This commit should only be merged after the Debian 10 release.
And perhaps it will need to wait longer than that; it would make
backporting new versions of git-annex to Debian 9 (stretch) which
has been actively happening as recently as this year.
This commit was sponsored by Ilya Shlyakhter.
The hoped for optimisation of CommandStart with -J did not materialize.
In fact, not runnign CommandStart in parallel is slower than -J3.
So, CommandStart are still run in parallel.
(The actual bad performance I've been seeing with -J in my big repo
has to do with building the remoteList.)
But, this is still progress toward making -J faster, because it gets rid
of the onlyActionOn roadblock in the way of making CommandCleanup jobs
run separate from CommandPerform jobs.
Added OnlyActionOn constructor for ActionItem which fixes the
onlyActionOn breakage in the last commit.
Made CustomOutput include an ActionItem, so even things using it can
specify OnlyActionOn.
In Command.Move and Command.Sync, there were CommandStarts that used
includeCommandAction, so output messages, which is no longer allowed.
Fixed by using startingCustomOutput, but that's still not quite right,
since it prevents message display for the includeCommandAction run
inside it too.
Prevents merging the import from deleting the non-preferred files from
the branch it's merged into.
adjustTree previously appended the new list of items to the old, which
could result in it generating a tree with multiple files with the same
name. That is not good and confuses some parts of git. Gave it a
function to resolve such conflicts.
That allowed dealing with the problem of what happens when the import
contains some files (or subtrees) with the same name as files that were
filtered out of the export. The files from the import win.
Needed for the --quiet to actually shut it up. The extra verification
this makes it do should be fine, as this is supposed to really return a
single tree's sha.
git rev-parse --quiet avoids "fatal: Invalid object name" when the
branch does not exist. Git.Ref.tree already returned a Maybe, so callers
already handle those cases themselves.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
The branch is only updated once the export is 100% complete. This way,
if an export is started but interrupted and so the remote does not yet
contain some of the files, an import will make a commit on the old
branch, and so won't delete the missing files.
Added graftTree but it's buggy.
Should use graftTree in Annex.Branch.graftTreeish; it will be faster
than the current implementation there.
Started Annex.Import, but untested and it doesn't yet handle tree
grafting.
My concern with using bytestring for this is the file needs to be split
into lines, and the encoding is not known. It's safe to split a utf-8
encoded file on the \n byte; only newlines get encoded to that byte in utf-8.
And this code already assumes utf-8 or ascii encoding, because it used
the filesystem encoding.
This relies on git ls-files --with-tree, which I'm using in a way that
its man page does not document. Hm. I emailed the git list to try to get
the docs improved, but at least the git test suite does test the same
kind of use case I'm using here.
Performance impact when not in an adjusted branch is limited to some
additional MVar accesses, and a single git call to determine the name of
the current branch. So very minimal.
When in an adjusted branch, the performance impact is
in Annex.WorkTree.lookupFile, which starts doing an equal amount of work
for files that didn't exist as it already did for files that were
unlocked.
This commit was sponsored by Jochen Bartl on Patreon.
Running git-annex linux builds in termux seems to work well enough that the
only reason to keep the Android app would be to support Android 4-5, which
the old Android app supported, and which I don't know if the termux method
works on (although I see no reason why it would not).
According to [1], Android 4-5 remains on around 29% of devices, down from
51% one year ago.
[1] https://www.statista.com/statistics/271774/share-of-android-platforms-on-mobile-devices-with-android-os/
This is a rather large commit, but mostly very straightfoward removal of
android ifdefs and patches and associated cruft.
Also, removed support for building with very old ghc < 8.0.1, and with
yesod < 1.4.3, and without concurrent-output, which were only being used
by the cross build.
Some documentation specific to the Android app (screenshots etc) needs
to be updated still.
This commit was sponsored by Brett Eisenberg on Patreon.
* init: Improve generated post-receive hook, so it won't fail when
run on a system whose git-annex is too old to support git-annex post-receive
* init: Update the post-receive hook when re-run in an existing repository.
This commit was sponsored by Jack Hill on Patreon.
Work around git cat-file --batch's protocol not supporting newlines by
running git cat-file not batched and passing the filename as a
parameter.
Of course this is quite a lot less efficient, especially because it
currently runs it multiple times to query for different pieces of
information.
Also, it has subtly different behavior when the batch process was
started and then some changes were made, in which case the batch process
sees the old index but this workaround sees the current index. Since
that batch behavior is mostly a problem that affects the assistant and has
to be worked around in it, I think I can get away with this difference.
I don't know of any other problems with newlines in filenames, everything
else in git I can think of supports -z. And git-annex's json output
supports newlines in filenames so downstream parsers from git-annex will be ok.
git-annex commands that use --batch themselves don't support newlines
in input filenames; using --json --batch is currently a way around that
problem.
This commit was sponsored by Ewen McNeill on Patreon.
* Don't use GIT_PREFIX when GIT_WORK_TREE=. because it seems git
does not intend GIT_WORK_TREE to be relative to GIT_PREFIX in that
case, despite GIT_WORK_TREE=.. being relative to GIT_PREFIX.
* Don't use GIT_PREFIX to fix up a relative GIT_DIR, because
git 2.11 sets GIT_PREFIX set to a path it's not relative to.
and apparently GIT_DIR is never relative to GIT_PREFIX.
Commit e50ed4ba48 led us down this path
by working around a git bug by relying on the barely documented GIT_PREFIX.
This commit was sponsored by Trenton Cronholm on Patreon.
