Converted warning and similar to use StringContainingQuotedPath. Most
warnings are static strings, some do refer to filepaths that need to be
quoted, and others don't need quoting.
Note that, since quote filters out control characters of even
UnquotedString, this makes all warnings safe, even when an attacker
sneaks in a control character in some other way.
When json is being output, no quoting is done, since json gets its own
quoting.
This does, as a side effect, make warning messages in json output not
be indented. The indentation is only needed to offset warning messages
underneath the display of the file they apply to, so that's ok.
Sponsored-by: Brett Eisenberg on Patreon
Improve handling of some .git/annex/ subdirectories being on other
filesystems, in the bittorrent special remote, and youtube-dl integration,
and git-annex addurl.
The only one of these that I've confirmed to be a problem is in the
bittorrent special remote when .git/annex/tmp and .git/annex/othertmp are
on different filesystems.
As well as auditing for renameFile, also audited for createLink, all of
those are ok as are the other remaining renameFile calls. Also audited all
code paths that use .git/annex/othertmp, and did not find any other
cross-device problems. So, removing mention of othertmp needing to be on
the same device.
Sponsored-by: Dartmouth College's Datalad project
Debian is going to drop youtube-dl which is not active upstream, and yt-dlp
is the replacement. This will make it be used if youtube-dl gets removed.
If an old version of youtube-dl remains installed, git-annex will still use
it. That might not be desirable, but changing git-annex to use yt-dlp in
preference to youtube-dl when both are installed risks breaking when
the user has annex.youtube-dl-options set to something that is supported
by youtube-dl, but not by yt-dlp.
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
Added annex.bwlimit and remote.name.annex-bwlimit config that works for git
remotes and many but not all special remotes.
This nearly works, at least for a git remote on the same disk. With it set
to 100kb/1s, the meter displays an actual bandwidth of 128 kb/s, with
occasional spikes to 160 kb/s. So it needs to delay just a bit longer...
I'm unsure why.
However, at the beginning a lot of data flows before it determines the
right bandwidth limit. A granularity of less than 1s would probably improve
that.
And, I don't know yet if it makes sense to have it be 100ks/1s rather than
100kb/s. Is there a situation where the user would want a larger
granularity? Does granulatity need to be configurable at all? I only used that
format for the config really in order to reuse an existing parser.
This can't support for external special remotes, or for ones that
themselves shell out to an external command. (Well, it could, but it
would involve pausing and resuming the child process tree, which seems
very hard to implement and very strange besides.) There could also be some
built-in special remotes that it still doesn't work for, due to them not
having a progress meter whose displays blocks the bandwidth using thread.
But I don't think there are actually any that run a separate thread for
downloads than the thread that displays the progress meter.
Sponsored-by: Graham Spencer on Patreon
Lots of nice wins from this in avoiding unncessary work, and I think
nothing got slower.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
removeFile changed to removeLink, because AFAICS it should be fine to
remove non-file things here. In particular, it's fine to remove a
symlink, since we're about to write a symlink. (removeLink does not
remove directories, so file, symlink, and unix socket are the only
possibilities.)
Which lets progress be displayed when doing concurrent downloads.
Amoung other things, like --json-progress etc.
The youtube-dl output is no longer displayed, except for any errors.
This commit was sponsored by Denis Dzyubenko on Patreon.
This handles all sites where checkSuccessProcess/ignoreFailureProcess
is used, except for one: Git.Command.pipeReadLazy
That one will be significantly more work to convert to bracketing.
(Also skipped Command.Assistant.autoStart, but it does not need to
shut down the processes it started on exception because they are
git-annex assistant daemons..)
forceSuccessProcess is done, except for createProcessSuccess.
All call sites of createProcessSuccess will need to be converted
to bracketing.
(process pools still todo also)
Convert Utility.Url to return Either String so the error message can be
displated in the annex monad and so captured.
(When curl is used, its errors are still not caught.)
Renamed annex.security.allowed-http-addresses to
annex.security.allowed-ip-addresses because it is not really specific to
the http protocol, also limiting eg, git-annex's use of ftp and via
youtube-dl, several other protocols.
The old name for the config will still work.
If both old and new name are set, the new name will win.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
Seems that youtube-dl --get-filename on a playlist lists all the filenames
for the playlist, which can take quite some time. The code already only
took the first name, so --no-playlist can speed it up a lot.
This commit was sponsored by Brett Eisenberg on Patreon.
addurl: When security configuration prevents downloads with youtube-dl,
still check if the url is one that it supports, and fail downloading it,
instead of downloading the raw web page.
Security fix! Allowing any schemes, particularly file: and
possibly others like scp: allowed file exfiltration by anyone who had
write access to the git repository, since they could add an annexed file
using such an url, or using an url that redirected to such an url,
and wait for the victim to get it into their repository and send them a copy.
* Added annex.security.allowed-url-schemes setting, which defaults
to only allowing http and https URLs. Note especially that file:/
is no longer enabled by default.
* Removed annex.web-download-command, since its interface does not allow
supporting annex.security.allowed-url-schemes across redirects.
If you used this setting, you may want to instead use annex.web-options
to pass options to curl.
With annex.web-download-command removed, nearly all url accesses in
git-annex are made via Utility.Url via http-client or curl. http-client
only supports http and https, so no problem there.
(Disabling one and not the other is not implemented.)
Used curl --proto to limit the allowed url schemes.
Note that this will cause git annex fsck --from web to mark files using
a disallowed url scheme as not being present in the web. That seems
acceptable; fsck --from web also does that when a web server is not available.
youtube-dl already disabled file: itself (probably for similar
reasons). The scheme check was also added to youtube-dl urls for
completeness, although that check won't catch any redirects it might
follow. But youtube-dl goes off and does its own thing with other
protocols anyway, so that's fine.
Special remotes that support other domain-specific url schemes are not
affected by this change. In the bittorrent remote, aria2c can still
download magnet: links. The download of the .torrent file is
otherwise now limited by annex.security.allowed-url-schemes.
This does not address any external special remotes that might download
an url themselves. Current thinking is all external special remotes will
need to be audited for this problem, although many of them will use
http libraries that only support http and not curl's menagarie.
The related problem of accessing private localhost and LAN urls is not
addressed by this commit.
This commit was sponsored by Brett Eisenberg on Patreon.
Fourth or fifth try at this and finally found a way to make it work.
Absurd amount of busy-work forced on me by change in cabal's behavior.
Split up Utility modules that need posix stuff out of ones used by
Setup. Various other hacks around inability for Setup to use anything
that ifdefs a use of unix.
Probably lost a full day of my life to this.
This is how build systems make their users hate them. Just saying.
And also now in non-fast mode, since it was just changed to query for the
filename separately.
And avoid processTranscript which mixed up stdout and stderr and could have
led to weirdness if there were warnings that didn't get suppressed.
addurl: When the file youtube-dl will download is already an annexed file,
don't download it again and fail to overwrite it, instead just do nothing,
like it used to when quvi was used.
This commit was sponsored by Anthony DeRobertis on Patreon.
Similar to c6e4bc0a22 but another code
path. As well as using youtube-dl unecessarily, it used the filename it
comes up with, which while nice for youtube videos, is not right for
other files.
This means more work is done for urls that youtube-dl does support,
but is probably more efficient for other urls, since it only downloads
the first chunk of content, while youtube-dl probably downloads more.
This commit was supported by the NSF-funded DataLad project.
Now youtubeDlCheck downloads the beginning of the url's content and
checks if it's html, only when it is does it pass it off the youtube-dl
to check if it supports it.
This means more work is done for urls that youtube-dl does support,
but is probably more efficient for other urls, since it only downloads
the first chunk of content, while youtube-dl probably downloads more.
As well as the reported bug, this also fixes behavior when an url
was added with youtube-dl, but the url content has now changed from
a html page to something else. Remote.Web.checkKey used to wrongly
succeed in that situation, since youtube-dl said sure it can download
that something else.
This commit was supported by the NSF-funded DataLad project.
Better to make it not be surprising and slow, than surprising and fast.
--raw can be used when it needs to be really fast.
Implemented adding a youtube-dl supported url to an existing file.
This commit was sponsored by andrea rota.
Decided not to --ignore-config by default. It the user has something in
their youtube-dl config files that breaks git-annex they can configure
it to use that option.
Including resuming and cleanup of incomplete downloads.
Still todo: --fast, --relaxed, importfeed, disk reserve checking,
quvi code cleanup.
This commit was sponsored by Anthony DeRobertis on Patreon.
