Support VERSION 2 in the external special remote protocol, which is
identical to VERSION 1, but avoids external remote programs neededing to
work around the above bug. External remote program that support
exporttree=yes are recommended to be updated to send VERSION 2.
Sponsored-by: Kevin Mueller on Patreon
Remote.Directory makes a temp file, then calls this, and since the temp
file exists, it prevented probing if CoW works.
Note that deleting the empty file does mean there's a small window for a
race. If another process is also exporting to the remote, that could let it
make the same temp file. However, the temp filename actually has the
processes's pid in it, which avoids that being a problem.
This may have been a reversion caused by commits around
63d508e885, but I haven't gone back and
tested to be sure. The directory special remote had supposedly supported
CoW for this going back to about half a year before that.
Sponsored-by: Graham Spencer on Patreon
The temporary URL key used for the download, before the real key is
generated, was blocked by annex.securehashesonly.
Fixed by passing the Backend that will be used for the final key into
runTransfer. When a Backend is provided, have preCheckSecureHashes
check that, rather than the key being transferred.
Sponsored-by: unqueued on Patreon
view: Support annex.maxextensionlength when generating filenames for the
view branch.
Note that refining an existing view will reuse the extension length that was
configured when initially constructing the view. This is necessarily the case
because it reuses the filenames.
Also view files used to have all extensions at the end, no matter how
many there were. Since annex.maxextensionlength's documentation includes
that it's limited to 2 extensions, I made it consistent with that.
Sponsored-by: k0ld on Patreon
I don't know of scenarios where that can happen (besides the bug
fixed by the parent commit), but there probably are some.
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
Avoid failure to update adjusted branch --unlock-present after git-annex
drop when annex.adjustedbranchrefresh=1
At higher values, it did flush the queue, which ran restagePointerFiles.
But at 1, adjustedBranchRefreshFull gets added to the queue, and while
restagePointerFiles is also in the queue, it runs after that.
Sponsored-by: Brock Spratlen on Patreon
Such an url is not valid; parseURI will fail on it. But git-annex doesn't
actually need to parse the url, because all it needs to do to support
syncing with it is know that it's not a local path, and use git pull and
push.
(Note that there is no good reason for the user to use such an url. An
absolute url is valid and I patched git-remote-gcrypt to support them
years ago. Still, users gonna do anything that tools allow, and
git-remote-gcrypt still supports them.)
Sponsored-by: Jack Hill on Patreon
copy: When --from and --to are combined and the content is already present
on the destination remote, update location tracking as necessary.
Sponsored-by: Dartmouth College's DANDI project
A repository can have a newline in its description due to being in a
directory containing a newline, or due to git-annex describe being
passed a string with a newline in it for some reason. Putting that
newline in uuid.log breaks its format.
So, escape the newline when it enters uuid.log, to \n
This is a one-way escaping, it is not converted back to a newline
when reading the log. If it were, commands like git-annex info and
whereis would display a multi-line description, which could be confusing
to read.
And, implementing roundtripping would necessarily cause problems if an
old version of git-annex were used to set a description that contained
whatever special character is used to escape the \n. Eg, a \ or if
it used the ! prefix before base64 data that is used in some other logs,
the ! character. Then the description set by the old git-annex would not
roundtrip.
There just doesn't seem to be any benefit of roundtripping newlines through,
so why bother? And, git often displays \n for newline when a filename
contains a newline, so git-annex doing it in this case seems sorta ok
by analogy to git.
(Some other git-annex logs can also have newlines put into them if the
user really wants to break git-annex. For example:
git-annex config annex.largefiles "foo
bar"
The full list is probably config.log, remote.log, group.log,
preferred-content.log, required-content.log,
group-preferred-content.log, schedule.log. Probably there is no
good reason to use a newline in any of these, and the breakage is
probably limited to the bad data the user put in not coming back out.
And users can write any garbage to log files themselves manually in any
case. So, I am not going to address all of those at this time. If a
problem such as this one with the newline in the repository path comes
up, it can be dealt with on a case by case basis.)
Sponsored-by: Dartmouth College's Datalad project
git hash-object --stdin-paths is a newline protocol so it cannot
support them. It would help to not use absPath, when the problem
is that the repository itself is in a path with a newline. But,
there's a reason it used absPath, which is that
git hash-object --stdin-paths actually chdirs to the top of the
repository on startup! That is not documented, and I think is a bug
in git.
I considered making the path relative to the top of the repo, but
then what if this is a git bug and gets fixed? git-annex would break
horribly.
So instead, keep the absPath, but when the path contains a newline,
fall back to running git hash-object once per file, which avoids
the problem with newlines and --stdin-paths. It will be slower,
but this is an edge case. (Similar slow code paths are already used
elsewhere when dealing with filenames with newlines and other parts
of git that use line-based protocols.)
Sponsored-by: Dartmouth College's Datalad project
Added arm64 build for ancient kernels, needed to support Android phones
whose kernels are too old to support kernels used by the current arm64
build.
Updated Android/git-annex-install to use it. (Also made it use i386-ancient
because that seems like a good idea.)
Sponsored-by: Noam Kremen on Patreon
As far as I can see, git-annex status was added to support direct mode, and
like other things added for that, it ought to be deprecated.
Behavior is similar to git status --short, though not identical in a few
cases eg renamed files.
I think datalad does not use this command, although it might have in the
past. Could not find any use of it in the current datalad code.
A deprecation warning at runtime would be the next step, probably will wait
and do that for all the deprecated commands together (except findref).
Well, perhaps it could be documented better, but it's a compositional
feature so users who need it will probably try it and be happy to find
that it works.
I had thought this would not make sense to combine with view branches,
since removing files from a view changes metadata.
However, that's committing removal of files. With --hide-missing, the
files get removed when git-annex updates the branch itself, so there is
no conflict.
It does not seem likely to be very useful, but it does work! And that's
nice because it means all types of adjusted branches can be combined with
view branches.
Sponsored-by: Max Thoursie on Patreon
When generating the view, check if the key is present.
When syncing in a view branch with an adjustment, run adjustedBranchRefreshFull
the same as is done when syncing in other adjusted branches. This is
needed because the docs for git-annex adjust --unlock-present suggest
using git-annex sync to update the branch when annex.adjustedbranchrefresh
is not set.
Note that, with annex.adjustedbranchrefresh set, it just works! The
adjusted branch gets updated in the usual way and it doesn't matter that
there's a view branch underneath.
And of course, re-running git-annex adjut --unlock-present also works,
as suggested in the docs.
Sponsored-by: Erik Bjäreholt on Patreon
This reverts commit 648e59cac2.
Failed to build on windows, because
In the dependencies for haskeline-0.8.2:
Win32-2.11.1.0 from Stack configuration does not match >=2.1 && <2.10 || >=2.12 (latest
matching version is 2.13.4.0)
jkniiv did find a solution that builds:
-- Win32-2.11.1.0
+- Win32-2.9.0.0
+- Cabal-3.6.3.0
+- directory-1.3.7.1
+- process-1.6.17.0
+- time-1.11.1.2
But that is a quite old version of Win32 and risks bugs from it, and bumping
Cabal and directory to newer than lts-19.33 has seems also likely to be risky.
So, I've given up. aws-0.24 won't be able to be in the stack build until
there's a stackage lts (or nightly) that has filepath (>=1.4.100.0),
which will not happen until sometime after the next ghc release.
info: Fix reversion in last release involving handling of unsupported input
by continuing to handle any other inputs, before exiting nonzero at the
end.
Sponsored-by: Dartmouth College's Datalad project
view: Fix a reversion in 10.20230214 that omitted a file from a view when
the file had no metadata set, but the view only used path fields.
Sponsored-by: Jack Hill on Patreon
path to a bare repo when git config is not allowed to list the configs
due to the CVE-2022-24765 fix.
That resulted in a confusing error message, and prevented the nice
message that explains how to mark the repo as safe to use.
Made isBare a tristate so that the case where core.bare is not returned can
be handled.
The handling in updateLocation is to check if the directory
contains config and objects and if so assume it's bare.
Note that if that heuristic is somehow wrong, it would construct a repo
that thinks it's bare but is not. That could cause follow-on problems,
but since git-annex then checks checkRepoConfigInaccessible, and skips
using the repo anyway, a wrong guess should not be a problem.
Sponsored-by: Luke Shumaker on Patreon
Used to fail with a bad error message, indicating there was no
repository with the specified name, or something like that. Now, suggest
they use the uuid to disambiguate.
* info, enableremotemote, renameremote: Avoid a confusing message when more
than one repository matches the user provided name.
* info: Exit nonzero when the input is not supported.
Sponsored-by: Kevin Mueller on Patreon
A benchmark in my sound repository with `git-annex view feedtitle=*`
took 2:52 wall clock time before and 1:58 after. Though it still only used
130% of CPU.
This is the same kind of optimisation that is in seekFilteredKeys, though
that precaches location logs while this streams the metadata logs direct
to parsing them.
seekFilteredKeys contains more streaming, to find the annexed files, and
this could be further sped up with similar streaming.
Sponsored-by: Nicholas Golder-Manning on Patreon
Based on https://github.com/golang/go/discussions/58409, the Go compiler
already defaults to using a google proxy server, which would allow
Google to collect information about what dependencies users are
installing. (Of course they claim they won't.) Two separate environment
settings are needed to turn that off, and users in that thread were
surprised to learn about one of them.
So this warning is already appropriate to some extent.
Also based on the minimisation of user concerns by the golang developers
on that issue and elsewhere, it seems best to assume that they are not
going to be dissuaded from increasing data collection efforts in the future,
even if the blowback prevents this particular attempt.
So this warning should not be removed unless the Go community somehow
extricates itself from Google's control. Or unless ipfs is rewritten in
another language.
Some distros do have ipfs. Unfortunately, Debian appears to be structurally
incapable of packaging it. (8 years and counting;
https://bugs.debian.org/779893). So lots of users will be stuck
installing it from source or having to trust its official binaries.
It apparently displays a notice on first use, but I was surprised to
learn about this behavior today, and I've used it. Displaying a notice
does not make violating users' privacy acceptable.
sync: Fix a bug that caused files to be removed from an importtree=yes
exporttree=yes special remote when the remote's annex-tracking-branch was
not the currently checked out branch.
Sponsored-by: Max Thoursie on Patreon
* sync: When run in a view branch, refresh the view branch to reflect any
changes that have been made to the parent branch or metadata.
This is basically working, but probably needs some more work to deal with
all the edge cases of things sync does.
Sponsored-by: Lawrence Brogan on Patreon
* view: New field?=glob and ?tag syntax that includes a directory "_"
in the view for files that do not have the specified metadata set.
* Added annex.viewunsetdirectory git config to change the name of the
"_" directory in a view.
When in a view using the new syntax, old git-annex will fail to parse the
view log. It errors with "Not in a view.", which is not ideal. But that
only affects view commands.
annex.viewunsetdirectory is included in the View for a couple of reasons.
One is to avoid needing to warn the user that it should not be changed when
in a view, since that would confuse git-annex. Another reason is that it
helped with plumbing the value through to some pure functions.
annex.viewunsetdirectory is actually mangled the same as any other view
directory. So if it's configured to something like "N/A", there won't be
multiple levels of directories, which would also confuse git-annex.
Sponsored-By: Jack Hill on Patreon
