This does, as a side effect, make long notes in json output not
be indented. The indentation is only needed to offset them
underneath the display of the file they apply to, so that's ok.
Sponsored-by: Brock Spratlen on Patreon
v10 will run 1 year after the upgrade to v9, to give time for any v8
processes to die. Until that point, the v10 upgrade will be tried by
every process but deferred, so added support for deferring upgrades.
The upgrade prevention lock file that will be used by v10 is not yet
implemented, so it does not yet defer.
Sponsored-by: Dartmouth College's Datalad project
This eliminates the distinction between decodeBS and decodeBS', encodeBS
and encodeBS', etc. The old implementation truncated at NUL, and the
primed versions had to do extra work to avoid that problem. The new
implementation does not truncate at NUL, and is also a lot faster.
(Benchmarked at 2x faster for decodeBS and 3x for encodeBS; more for the
primed versions.)
Note that filepath-bytestring 1.4.2.1.8 contains the same optimisation,
and upgrading to it will speed up to/fromRawFilePath.
AFAIK, nothing relied on the old behavior of truncating at NUL. Some
code used the faster versions in places where I was sure there would not
be a NUL. So this change is unlikely to break anything.
Also, moved s2w8 and w82s out of the module, as they do not involve
filesystem encoding really.
Sponsored-by: Shae Erisson on Patreon
This adds a separate journal, which does not currently get committed to
an index, but is planned to be committed to .git/annex/index-private.
Changes that are regarding a UUID that is private will get written to
this journal, and so will not be published into the git-annex branch.
All log writing should have been made to indicate the UUID it's
regarding, though I've not verified this yet.
Currently, no UUIDs are treated as private yet, a way to configure that
is needed.
The implementation is careful to not add any additional IO work when
privateUUIDsKnown is False. It will skip looking at the private journal
at all. So this should be free, or nearly so, unless the feature is
used. When it is used, all branch reads will be about twice as expensive.
It is very lucky -- or very prudent design -- that Annex.Branch.change
and maybeChange are the only ways to change a file on the branch,
and Annex.Branch.set is only internal use. That let Annex.Branch.get
always yield any private information that has been recorded, without
the risk that Annex.Branch.set might be called, with a non-private UUID,
and end up leaking the private information into the git-annex branch.
And, this relies on the way git-annex union merges the git-annex branch.
When reading a file, there can be a public and a private version, and
they are just concacenated together. That will be handled the same as if
there were two diverged git-annex branches that got union merged.
The only price paid is one additional MVar read per write to the journal.
Presumably writing a journal file dominiates over a MVar read time by
several orders of magnitude.
--batch does not get the speedup because then it needs to notice when
another process has made a change. Also made the assistant and other damon
modes bypass the optimisation, which would not help them anyway.
Fix support for repositories tuned with annex.tune.branchhash1=true,
including --all not working and git-annex log not displaying anything for
annexed files.
Adds a dependency on filepath-bytestring, an as yet unreleased fork of
filepath that operates on RawFilePath.
Git.Repo also changed to use RawFilePath for the path to the repo.
This does eliminate some RawFilePath -> FilePath -> RawFilePath
conversions. And filepath-bytestring's </> is probably faster.
But I don't expect a major performance improvement from this.
This is mostly groundwork for making Annex.Location use RawFilePath,
which will allow for a conversion-free pipleline.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
Most of the individual logs are not converted yet, only presense logs
have an efficient ByteString Builder implemented so far. The rest
convert to and from String.
I hope this doesn't impact speed much -- it does have to pull out a value
from Annex state every time it accesses the branch now.
The test case I dropped has never caught any problems that I can remember,
and would have been rather difficult to convert.
Removed instance, got it all to build using fromRef. (With a few things
that really need to show something using a ref for debugging stubbed out.)
Then added back Read instance, and made Logs.View use it for serialization.
This changes the view log format.
Having one module that knows about all the filenames used on the branch
allows working back from an arbitrary filename to enough information about
it to implement dropping dead remotes and doing other log file compacting
as part of a forget transition.
Pass subcommand as a regular param, which allows passing git parameters
like -c before it. This was already done in the pipeing set of functions,
but not the command running set.
Baked into the code was an assumption that a repository's git directory
could be determined by adding ".git" to its work tree (or nothing for bare
repos). That fails when core.worktree, or GIT_DIR and GIT_WORK_TREE are
used to separate the two.
This was attacked at the type level, by storing the gitdir and worktree
separately, so Nothing for the worktree means a bare repo.
A complication arose because we don't learn where a repository is bare
until its configuration is read. So another Location type handles
repositories that have not had their config read yet. I am not entirely
happy with this being a Location type, rather than representing them
entirely separate from the Git type. The new code is not worse than the
old, but better types could enforce more safety.
Added support for core.worktree. Overriding it with -c isn't supported
because it's not really clear what to do if a git repo's config is read, is
not bare, and is then overridden to bare. What is the right git directory
in this case? I will worry about this if/when someone has a use case for
overriding core.worktree with -c. (See Git.Config.updateLocation)
Also removed and renamed some functions like gitDir and workTree that
misused git's terminology.
One minor regression is known: git annex add in a bare repository does not
print a nice error message, but runs git ls-files in a way that fails
earlier with a less nice error message. This is because before --work-tree
was always passed to git commands, even in a bare repo, while now it's not.
Done by adding a oneshot mode, in which location log changes are written to
the journal, but not committed. Taking advantage of git-annex's existing
ability to recover in this situation.
This is used by git-annex-shell and other places where changes are made to
a remote's location log.
In git, a Ref can be a Sha, or a Branch, or a Tag. I added type aliases for
those. Note that this does not prevent mixing up of eg, refs and branches
at the type level. Since git really doesn't care, except rare cases like
git update-ref, or git tag -d, that seems ok for now.
There's also a tree-ish, but let's just use Ref for it. A given Sha or Ref
may or may not be a tree-ish, depending on the object type, so there seems
no point in trying to represent it at the type level.
Many functions took the repo as their first parameter. Changing it
consistently to be the last parameter allows doing some useful things with
currying, that reduce boilerplate.
In particular, g <- gitRepo is almost never needed now, instead
use inRepo to run an IO action in the repo, and fromRepo to get
a value from the repo.
This also provides more opportunities to use monadic and applicative
combinators.
All changes to files in the branch are now made via pure functions that
transform the old file into the new. This will allow adding locking
to prevent read/write races. It also makes the code nicer, and purer.
I noticed a behavior change, really a sort of bug fix. Before,
'git annex untrust foo --trust bar' would change both trust levels
permanantly, now the --trust doesn't get stored.
Adds a missing newline when a longnote is followed by a endresult.
Multiple longnotes in a row will now be separated by a blank line, which
could be a bug or a feature depending on taste.
Removed several places where newlines were explicitly displayed after
longnotes.
