The goal is to be able to run CommandStart in the main thread when -J is
used, rather than unncessarily passing it off to a worker thread, which
incurs overhead that is signficant when the CommandStart is going to
quickly decide to stop.
To do that, the message it displays needs to be displayed in the worker
thread, after the CommandStart has run.
Also, the change will mean that CommandStart will no longer necessarily
run with the same Annex state as CommandPerform. While its docs already
said it should avoid modifying Annex state, I audited all the
CommandStart code as part of the conversion. (Note that CommandSeek
already sometimes runs with a different Annex state, and that has not been
a source of any problems, so I am not too worried that this change will
lead to breakage going forward.)
The only modification of Annex state I found was it calling
allowMessages in some Commands that default to noMessages. Dealt with
that by adding a startCustomOutput and a startingUsualMessages.
This lets a command start with noMessages and then select the output it
wants for each CommandStart.
One bit of breakage: onlyActionOn has been removed from commands that used it.
The plan is that, since a StartMessage contains an ActionItem,
when a Key can be extracted from that, the parallel job runner can
run onlyActionOn' automatically. Then commands won't need to worry about
this detail. Future work.
Otherwise, this was a fairly straightforward process of making each
CommandStart compile again. Hopefully other behavior changes were mostly
avoided.
In a few cases, a command had a CommandStart that called a CommandPerform
that then called showStart multiple times. I have collapsed those
down to a single start action. The main command to perhaps suffer from it
is Command.Direct, which used to show a start for each file, and no
longer does.
Another minor behavior change is that some commands used showStart
before, but had an associated file and a Key available, so were changed
to ShowStart with an ActionItemAssociatedFile. That will not change the
normal output or behavior, but --json output will now include the key.
This should not break it for anyone using a real json parser.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
This is groundwork for nested seek loops, eg seeking over all files and
then performing commandActions on a list of remotes, which can be done
concurrently.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Added -z option to git-annex commands that use --batch, useful for
supporting filenames containing newlines.
It only controls input to --batch, the output will still be line delimited
unless --json or etc is used to get some other output. While git often
makes -z affect both input and output, I don't like trying them together,
and making it affect output would have been a significant complication,
and also git-annex output is generally not intended to be machine parsed,
unless using --json or a format option.
Commands that take pairs like "file key" still separate them with a space
in --batch mode. All such commands take care to support filenames with
spaces when parsing that, so there was no need to change it, and it would
have needed significant changes to the batch machinery to separate tose
with a null.
To make fromkey and registerurl support -z, I had to give them a --batch
option. The implicit batch mode they enter when not provided with input
parameters does not support -z as that would have complicated option
parsing. Seemed better to move these toward using the same --batch as
everything else, though the implicit batch mode can still be used.
This commit was sponsored by Ole-Morten Duesund on Patreon.
When --batch is used with matching options like --in, --metadata, etc, only
operate on the provided files when they match those options. Otherwise, a
blank line is output in the batch protocol.
Affected commands: find, add, whereis, drop, copy, move, get
In the case of find, the documentation for --batch already said it honored
the matching options. The docs for the rest didn't, but it makes sense to
have them honor them. While this is a behavior change, why specify the
matching options with --batch if you didn't want them to apply?
Note that the batch output for all of the affected commands could
already output a blank line in other cases, so batch users should
already be prepared to deal with it.
git-annex metadata didn't seem worth making support the matching options,
since all it does is output metadata or set metadata, the use cases for
using it in combination with the martching options seem small. Made it
refuse to run when they're combined, leaving open the possibility for later
support if a use case develops.
This commit was sponsored by Brett Eisenberg on Patreon.
As long as all code imports Utility.Aeson rather than Data.Aeson,
and no Strings that may contain utf-8 characters are used for eg, object
keys via T.pack, this is guaranteed to fix the problem everywhere that
git-annex generates json.
It's kind of annoying to need to wrap ToJSON with a ToJSON', especially
since every data type that has a ToJSON instance has to be ported over.
However, that only took 50 lines of code, which is worth it to ensure full
coverage. I initially tried an alternative approach of a newtype FileEncoded,
which had to be used everywhere a String was fed into aeson, and chasing
down all the sites would have been far too hard. Did consider creating an
intentionally overlapping instance ToJSON String, and letting ghc fail
to build anything that passed in a String, but am not sure that wouldn't
pollute some library that git-annex depends on that happens to use ToJSON
String internally.
This commit was supported by the NSF-funded DataLad project.
Added --json-error-messages option, which includes error messages in the
json output, rather than outputting them to stderr.
The actual rediretion of errors is not implemented yet, this is only
the docs and option plumbing.
This commit was supported by the NSF-funded DataLad project.
Clean up some uses of showStart with "" for the file,
or in some cases, a non-filename description string. That would
generate bad json, although none of the commands doing that
supported --json.
Using "" for the file resulted in output like "foo rest";
now the extra space is eliminated.
This commit was sponsored by Fernando Jimenez on Patreon.
git annex add, git annex lock etc make multiple seek passes,
and each seek pass checked that files existed. That was unncessary
redundant work.
Fixed by adding a new WorkTreeItem type, make seek actions use it,
and check that the files exist when constructing it.
This commit was supported by the NSF-funded DataLad project.
Avoid threads emitting json at the same time and scrambling, which was
still possible even with the buffering, just less likely.
Converted json IO actions to JSONChunk data too.
Note that get --from foo --failed will get things that a previous get --from bar
tried and failed to get, etc. I considered making --failed only retry
transfers from the same remote, but it was easier, and seems more useful,
to not have the same remote requirement.
Noisy due to some refactoring into Types/
Show branch:file that is being operated on.
I had to make ActionItem a type and not a type class because
withKeyOptions' passed two different types of values when using the type
class, and I could not get the type checker to accept that.
This is a work in progress. It compiles and is able to do basic command
dispatch, including git autocorrection, while using optparse-applicative
for the core commandline parsing.
* Many commands are temporarily disabled before conversion.
* Options are not wired in yet.
* cmdnorepo actions don't work yet.
Also, removed the [Command] list, which was only used in one place.
Only fsck and reinject and the test suite used the Backend, and they can
look it up as needed from the Key. This simplifies the code and also speeds
it up.
There is a small behavior change here. Before, all commands would warn when
acting on an annexed file with an unknown backend. Now, only fsck and
reinject show that warning.
I've been disliking how the command seek actions were written for some
time, with their inversion of control and ugly workarounds.
The last straw to fix it was sync --content, which didn't fit the
Annex [CommandStart] interface well at all. I have not yet made it take
advantage of the changed interface though.
The crucial change, and probably why I didn't do it this way from the
beginning, is to make each CommandStart action be run with exceptions
caught, and if it fails, increment a failure counter in annex state.
So I finally remove the very first code I wrote for git-annex, which
was before I had exception handling in the Annex monad, and so ran outside
that monad, passing state explicitly as it ran each CommandStart action.
This was a real slog from 1 to 5 am.
Test suite passes.
Memory usage is lower than before, sometimes by a couple of megabytes, and
remains constant, even when running in a large repo, and even when
repeatedly failing and incrementing the error counter. So no accidental
laziness space leaks.
Wall clock speed is identical, even in large repos.
This commit was sponsored by an anonymous bitcoiner.
