On Windows, a file that is not writable cannot be deleted even if in a
directory with write perms. So git object files were not getting deleted
when removing a git repository.
Need to include the uuid of the local repo in the list of belived locations
of a key after getting it, in order for the drop from remote to include it
in the numcopies calculation.
* sync --content: Honor annex-ignore configuration.
* sync: Don't try to sync with xmpp remotes, which are only currently
supported when using the assistant.
Seems that locking of annexed objects when they're being dropped was broken
in direct mode:
* When taking the lock before dropping, it created the .git/annex/objects
file, as an empty file. It seems that the dropping code deleted that,
but that is not right, and for all I know could in some situation cause
a corrupted object to leak out.
* When the lock was checked, it actually tried to open each direct mode
file, and checked if it was locked. Not the same lock used above, and
could also fail if some consumer of the file locked it.
Fixed this, and added windows support by switching direct mode to lock a
.lck file.
Make sanity checker run git annex unused daily, and queue up transfers
of unused files to any remotes that will have them. The transfer retrying
code works for us here, so eg when a backup disk remote is plugged in,
any transfers to it are done. Once the unused files reach a remote,
they'll be removed locally as unwanted.
If the setup does not cause unused files to go to a remote, they'll pile
up, and the sanity checker detects this using some heuristics that are
pretty good -- 1000 unused files, or 10% of disk used by unused files,
or more disk wasted by unused files than is left free. Once it detects
this, it pops up an alert in the webapp, with a button to take action.
TODO: Webapp UI to configure this, and also the ability to launch an
immediate cleanup of all unused files.
This commit was sponsored by Simon Michael.
Checking .gitattributes adds a full minute to a git annex find looking for
files that don't have enough copies. 2:25 increasts to 3:27. I feel this is
too much of a slowdown to justify making it the default. So, exposed two
versions of the preferred content expression, a slow one and a fast but
approximate one.
I'm using the approximate one in the default preferred content expressions
to avoid slowing down the assistant.
* Add numcopiesneeded preferred content expression.
* Client, transfer, incremental backup, and archive repositories
now want to get content that does not yet have enough copies.
This means the asssistant will make copies of files that don't yet
meet the configured numcopies, even to places that would not normally want
the file.
For example, if numcopies is 4, and there are 2 client repos and
2 transfer repos, and 2 removable backup drives, the file will be sent
to both transfer repos in order to make 4 copies. Once a removable drive
get a copy of the file, it will be dropped from one transfer repo or the
other (but not both).
Another example, numcopies is 3 and there is a client that has a backup
removable drive and two small archive repos. Normally once one of the small
archives has a file, it will not be put into the other one. But, to satisfy
numcopies, the assistant will duplicate it into the other small archive
too, if the backup repo is not available to receive the file.
I notice that these examples are fairly unlikely setups .. the old behavior
was not too bad, but it's nice to finally have it really correct.
.. Almost. I have skipped checking the annex.numcopies .gitattributes
out of fear it will be too slow.
This commit was sponsored by Florian Schlegel.
* numcopies: New command, sets global numcopies value that is seen by all
clones of a repository.
* The annex.numcopies git config setting is deprecated. Once the numcopies
command is used to set the global number of copies, any annex.numcopies
git configs will be ignored.
* assistant: Make the prefs page set the global numcopies.
This global numcopies setting is needed to let preferred content
expressions operate on numcopies.
It's also convenient, because typically if you want git-annex to preserve N
copies of files in a repo, you want it to do that no matter which repo it's
running in. Making it global avoids needing to warn the user about gotchas
involving inconsistent annex.numcopies settings.
(See changes to doc/numcopies.mdwn.)
Added a new variety of git-annex branch log file, that holds only 1 value.
Will probably be useful for other stuff later.
This commit was sponsored by Nicolas Pouillard.
Similar to the assistant, this honors any configured preferred content
expressions.
I am not entirely happpy with the implementation. It would be nicer if
the seek function returned a list of actions which included the individual
file gets and copies and drops, rather than the current list of calls to
syncContent. This would allow getting rid of the somewhat reundant display
of "sync file [ok|failed]" after the get/put display.
But, do that, withFilesInGit would need to somehow be able to construct
such a mixed action list. And it would be less efficient than the current
implementation, which is able to reuse several values between eg get and
drop.
Note that currently this does not try to satisfy numcopies when
getting/putting files (numcopies are of course checked when dropping
files!) This makes it like the assistant, and unlike get --auto
and copy --auto, which do duplicate files when numcopies is not yet
satisfied. I don't know if this is the right decision; it only seemed to
make sense to have this parallel the assistant as far as possible to start
with, since I know the assistant works.
This commit was sponsored by Øyvind Andersen Holm.
Known problems:
1. Tries to tahoe start when daemon is already running.
2. If multiple tahoe remotes are set up on the same computer,
they will have the same node.url configured by default,
and this confuses tahoe commands.
This commit was sponsored by LeastAuthority.com
So that remotes that use a persistent network connection are restarted.
A remote might keep open a long duration network connection, and could
fail to deal well with losing the connection. This is particularly a
concern now that we have external special reotes. An external
special remote that is implemented naively might open the connection only
when PREPARE is sent, and if it loses connection, throw errors on each
request that is made.
(Note that the ssh connection caching should not have this problem; if the
long-duration ssh process loses connection, the named pipe is disconnected
and the next ssh attempt will reconnect. Also, XMPP already deals with
disconnection robustly in its own way.)
There's no way for git-annex to know if a lost network connection actually
affects a given remote, which might have a transfer in process. It does not
make sense to force kill the transferkeys process every time the NetWatcher
detects a change. (Especially because the NetWatcher sometimes polls 1
change per hour.)
In any case, the NetWatcher only detects connection to a network, not
disconnection. So if a transfer is in progress over the network, and the
network goes down, that will need to time out on its own.
An alternate approch that was considered is to use a separate transferkeys
process for each remote, and detect when a request fails, and assume that
means that process is in a failing state and restart it. The problem with
that approach is that if a resource is not available and a remote fails
every time, it degrades to starting a new transferkeys process for every
file transfer, which is too expensive.
Instead, this commit only handles the network reconnection case, and restarts
transferkeys only once the network has reconnected and another transfer needs
to be made. So, a transferkeys process will be reused for 1 hour, or until the
next network connection.
----
The NotificationBroadcaster was rewritten to use TMVars rather than MSampleVars,
to allow checking without blocking if a notification has been received.
----
This commit was sponsored by Tobias Brunner.
Noticed that it was possible for add to move a file to .git/annex/objects
and not make the link if the disk was full. This happened because the
location log update failed, and so addLink never got a chance to run.
Running addLink first fixes it; on error it will unwind by moving the file
back to where it was originally.
This adds a http HEAD before the download is done. That was already the
case when the assistant was running, and it seems worth it to avoid filling
up the whole disk, like happened to my server today.
This allows a remote to store a piece of arbitrary state associated with a
key. This is needed to support Tahoe, where the file-cap is calculated from
the data stored in it, and used to retrieve a key later. Glacier also would
be much improved by using this.
GETSTATE and SETSTATE are added to the external special remote protocol.
Note that the state is left as-is even when a key is removed from a remote.
It's up to the remote to decide when it wants to clear the state.
The remote state log, $KEY.log.rmt, is a UUID-based log. However,
rather than using the old UUID-based log format, I created a new variant
of that format. The new varient is more space efficient (since it lacks the
"timestamp=" hack, and easier to parse (and the parser doesn't mess with
whitespace in the value), and avoids compatability cruft in the old one.
This seemed worth cleaning up for these new files, since there could be a
lot of them, while before UUID-based logs were only used for a few log
files at the top of the git-annex branch. The transition code has also
been updated to handle these new UUID-based logs.
This commit was sponsored by Daniel Hofer.
This was unexpectedly difficult because of a depdenency cycle. To parse a
preferred content expression involves several things that need to operate
on the list of remotes. Which needs Remote.External. The only way to avoid
this cycle (I tried breaking it at several points) was to skip parsing the
expression in SETWANTED.
That's sorta ok, because git-annex already has to deal with unparsable
preferred content expressions being stored, in order to handle eg,
upgrades. But I'm still not very happy that I cannot check it.
I feel this is a strong indication that I need to beware of further
bloating the special remote protocol interface.
Batch detection is heuristic, so can sometimes fail. I observed one such
failure while starting up in a repository with 87000 files. After the first
several batches of ~5000 files, it fell out of batch mode, and never
re-entered it, and so made many more commits of a few files at a time
than necessary.
So, let's always use batch mode when in the startup scan. This avoids the
heuristic there, at least.
There is clearly also room to improve the heuristic. Possibly 10 files is
too high a bar to be found during a commit, on a system that can commit
quickly.
Fixes a test case I received where a corrupted repo was repaired, but the
git-annex branch was not. The root of the problem was that the
MissingObject returned by the repair code was not necessarily a complete
set of all objects that might have been deleted during the repair.
So, stop trying to return that at all, and instead make the index file
checking code explicitly verify that each object the index uses is present.
Previous test did not notice if there is a dangling symlink.
Also, if a directory exists with the same name as the imported file, that
cannot work, so don't let --force have an effect.
Note that the hash backends were made to stop printing a (checksum..)
message as part of this, since it showed up without a file when deciding
whether to act on a file. Should have probably removed that message a while
ago anyway, I suppose.
The assistant's commit code also always avoids git commit, for simplicity.
Indirect mode sync still does a git commit -a to catch unstaged changes.
Note that this means that direct mode sync no longer runs the pre-commit
hook or any other hooks git commit might call. The git annex pre-commit
hook action for direct mode is however explicitly run. (The assistant
already ran git commit with hooks disabled, so no change there.)
Not yet wired up to restart the assistant on upgrade; that needs careful
sanity checking to wait until the upgrade is done before restarting.
Used the DirWatcher here, so it gets events for any changes to the
directory containing the program file. (But not subdirs.) This is necessary
in order to detect when the file is renamed as part of the upgrade, which
an inotify on a single file would not detect. (Also, I have DirWatcher code,
but not FileWatcher code.)
Note that upgrades that remove or rename a whole directory tree containing
the executable will *not* trigger this code. So eg, deleting and replacing
the whole standalone tarball dir tree won't work -- but untarring it
over top will. So should dpkg package upgrades.
Added programPath, using a new GHC feature to find the full path to the
executable. The fallback code for old GHC or unsupported OS is less good;
its worst failure mode would be either failing to find the program, and so
not checking for upgrades, or finding a git-annex that's in PATH, but is
not the one running.
This commit was sponsored by John Roepke.
In 0.9, -v shows version, rather than controlling verbosity.
Still need to port to 0.9, this just avoids massively confusing addurl when
quvi prints its version and exits successfully, on urls that it cannot be
used with.
Because that allowed writing to symlinks of files that are not present,
which followed the link and put bad content in an object location.
fsck: Fix up .git/annex/object directory permissions.
This commit was sponsored by an anonymous bitcoin donor.
Complicated by such repositories potentially being repos that should have
an annex.uuid, but it failed to be gotten, perhaps due to the past ssh repo
setup bugs. This is handled now by an Upgrade Repository button.
Adding the file moved it to the annex, and then tried to set the mode.
Error unwind then moved the file back, and so the watcher saw the file get
deleted and then added back, and so tried again..
