Using == and != proved too hard to read, so went with [TRUE] and [FALSE]
after the term. I would kind of liked to have used emojis for a green
check and red X, but probably that is too fancy to be a good idea.
Make --explain output be inside [ ] with whitespace around them, to
avoid it ending with eg "[FALSE]]" and to make it easier to visually
find the start of it.
Sponsored-by: Dartmouth College's DANDI project
And annex.largefiles and annex.addunlocked.
Also git-annex matchexpression --explain explains why its input
expression matches or fails to match.
When there is no limit, avoid explaining why the lack of limit
matches. This is also done when no preferred content expression is set,
although in a few cases it defaults to a non-empty matcher, which will
be explained.
Sponsored-by: Dartmouth College's DANDI project
Currently it only displays explanations of options like --in and --copies.
In the future, it should explain preferred content expression evaluation
and other decisions.
The explanations of a few things could be better. In particular,
"standard" will just appear as-is (or as "!standard" if it doesn't
match), rather than explaining why the standard preferred content expression
for the group matches or not.
Currently as implemented, it goes to stdout, and so commands like
git-annex find that have custom output will not display --explain
information. Perhaps that should change, dunno.
Sponsored-by: Dartmouth College's DANDI project
Failure to remove is not treated as a problem, and no permissions
modifications are done, to avoid unexpected states.
Sponsored-by: Luke Shumaker on Patreon
* S3: Amazon S3 buckets created after April 2023 do not support ACLs,
so public=yes cannot be used with them. Existing buckets configured
with public=yes will keep working.
* S3: Allow setting publicurl=yes without public=yes, to support
buckets that are configured with a Bucket Policy that allows public
access.
Sponsored-by: Joshua Antonishen on Patreon
This causes changes to the original branch to get merged with a single
sync. Before, it took 2 syncs; the first happened to update the synced/
branch, and the second merged changes from the synced/ branch into the
ajusted branch.
Using mergeToAdjustedBranch when tomerge == origbranch is probably
overkill, but it does work fine.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
(And allow it to be used in the --template although that seems unlikely to
be very useful.)
My use case for this is that one of the podcast feeds I subscribe to is
sometimes leaking episodes of some other podcast. The other podcast is also
very close to spam, so this may be a form of intentional spamming. I have
not been able to catch the podcast feed containing those episodes, so I
don't know which one is at fault. So putting this in the metadata will let
me eventually catch it.
Bug fix: Re-running git-annex adjust or sync when in an adjusted branch
would overwrite the original branch, losing any commits that had been made
to it since the adjusted branch was created.
When git-annex adjust is run in this situation, it will display a warning
about the diverged branches.
When git-annex sync is run in this situation, mergeToAdjustedBranch
will merge the changes from the original branch to the adjusted branch.
So it does not need to display the divergence warning.
Note that for some reason, I'm needing to run sync twice for that to
happen. The first run does not do the merge and the second does. I'm unsure
why and so am not fully done with this bug.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
The paragraph just above already shows how to configure .gitattributes
and the necessary git config. So this is redundant. Also, it makes
.gitattributes match *, which is likely not a good idea because those
files are not likely to be all text files.
Running git config --list inside .git then fails, so better to only
do that when --git-dir was specified explicitly. Otherwise, when the
repository is not bare, run the command inside the working tree.
Also make init detect when the uuid it just set cannot be read and fail
with an error, in case git changes something that breaks this later.
I still don't actually understand why git-annex add/assist -J2 was
affected but -J1 was not. But I did show that it was skipping writing to
the location log, because the uuid was NoUUID.
Sponsored-by: Graham Spencer on Patreon
Command.Add.seek starts concurrency with CommandStages. And for
Command.Sync, it needs TransferStages. So, to get both types of concurrency
for the two different parts, it either needs to change the type of
concurrency in between, or just call startConcurrency once for each.
It seems safe enough to call startConcurrency twice, because it does shut
down concurrency (mostly) at the end, and eg the old Annex.workers get
emptied.
Sponsored-by: unqueued on Patreon
This ended up having an interface like sync, rather than like get/copy/drop.
That let it be implemented in terms of sync, which took a lot less code.
Also, it lets it handle many of the edge cases that sync does, such as
getting files that are not visible in a --hide-missing branch, and sending
files to exporttree remotes.
As well as being easier to implement, `git-annex satisfy myremote` makes
sense as it satisfies the preferred content settings of the remote.
`git-annex satisfy somefile` does not form a sentence that makes sense. So
while -C can be a little bit annoying, it still makes sense to have this
syntax.
Note that, while I initially thought this would also satisfy numcopies, it
does not. Arguably it ought to. But, sync does not send files in order to
satisfy numcopies, it only sends files to satisfy preferred content. And
it's important that this transfer the same files as sync does, because
it will probably be used in a workflow where the user sometimes syncs and
sometimes satisfies, and does not expect satisfy to do things that sync
would not do.
(Also opened a new bug that also affects sync et all, not only this command.)
Sponsored-by: Nicholas Golder-Manning on Patreon
This was already possible, but it was rather hard to come up with the
complex shell command needed.
Note that the diff output starts with "diff a/... b/...".
I left off the "--git" because it's not a git format diff.
Fixes a crash by git-annex repair when .git/annex/journal/ does not exist.
Normally the journal directory is created before withJournalHandle gets
run, but git-annex repair can be run in a situation where it does not
exist.
git add will fail if the file got deleted in the meantime. And since it was
queued, there was a window until the queue flushed where a deletion of the
file would cause a crash.
Instead, reuse Command.Add.addFile, which sha1 hashes the file itself
immediately, and then queues the index update. Ignore exceptions that will
happen if the file got deleted already.
Sponsored-by: k0ld on Patreon
Commit b6642dde8a broke it by enabling
non-concurrent display mode while leaving concurrency set in the config
and having already started concurrency earlier.
(I don't actually know if that commit was a good idea.)
Sponsored-By: Brett Eisenberg on Patreon
* config: Added the --show-origin and --for-file options.
* config: Support annex.numcopies and annex.mincopies.
There is a little bit of redundancy here with other code elsewhere that
combines the various configs and selects which to use. But really only
for the special case of annex.numcopies, which is a git config that does
not override the annex branch setting and for annex.mincopies, which does
not have a git config but does have gitattributes settings as well as the
annex branch setting.
That seems small enough, and unlikely enough to grow into a mess that it was
worth supporting annex.numcopies and annex.mincopies in git-annex config
--show-origin. Because these settings are a prime thing that someone might
get confused about and want to know where they were configured.
And, it followed that git-annex config might as well support those two
for --set and --get as well. While this is redundant with the speclialized
commands, it's only a little code and it makes it more consistent.
Note that --set does not have as nice output as numcopies/mincopies
commands in some special cases like setting to 0 or a negative number.
It does avoid setting to a bad value thanks to the smart
constructors (eg configuredNumCopies).
As for other git-annex branch configurations that are not set by git-annex
config, things like trust and wanted that are specific to a repository
don't map to a git config name, so don't really fit into git-annex config.
And they are only configured in the git-annex branch with no local override
(at least so far), so --show-origin would not be useful for them.
Sponsored-by: Dartmouth College's DANDI project
Optimise database to further speed up importing large trees from special
remotes.
See comment for details of why the other index didn't help cid queries.
It would probably be better to manually create an index on only cid, rather
than adding a second uniqueness constraint that is a larger index. But
persitent does not support creating indexes, and an attempt to manually add
it to the migration failed.
Sponsored-by: Nicholas Golder-Manning on Patreon
This avoids bottlenecking on git check-ignore in a particular situation.
Also, there may have been a correctness issue with it not having updated it.
When the exportdb is already up-to-date, this is not expensive. And the
exportdb is updated elsewhere, so usually it is up-to-date.
Sponsored-by: Joshua Antonishen on Patreon
Speeds up eg git-annex sync --content by up to 50%. When it does not need
to transfer or drop anything, it now noops a lot more quickly.
I didn't see anything else in sync --content noop loop that could really
be sped up. It has to cat git objects to keys, stat object files, etc.
Sponsored-by: unqueued on Patreon
