Clear visible progress bar first.
Removed showSideActionAfter because it can't be used in reconcileStaged
(import loop). Instead, it counts the number of files it
processes and displays it after it's seen a sufficient to know it's
taking a while.
Sponsored-by: Dartmouth College's Datalad project
Checksum as content is received from a remote git-annex repository, rather
than doing it in a second pass.
Not tested at all yet, but I imagine it will work!
Not implemented for any special remotes, and also not implemented for
copies from local remotes. It may be that, for local remotes, it will
suffice to use rsync, rely on its checksumming, and simply return Verified.
(It would still make a checksumming pass when cp is used for COW, I guess.)
Json objects not yet handled, and some other special cases, but this is
the bulk of the messages.
For progress meters, POSIXTime does not have a Read instance (or a
suitable Show instance), so had to switch to using a Double for progress
meters.
This commit was sponsored by Ethan Aubin on Patreon.
This is an edge case, which happened to be triggered by the P2P protocol
seeing DATA 0. When reading 0 bytes, getting an empty string does
not mean the handle has reached EOF.
I verified there was in fact a bug, where get of an empty file followed
by another file would get the empty file and then fail
with "handle is closed". This fixes it.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Lots of nice wins from this in avoiding unncessary work, and I think
nothing got slower.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Which lets progress be displayed when doing concurrent downloads.
Amoung other things, like --json-progress etc.
The youtube-dl output is no longer displayed, except for any errors.
This commit was sponsored by Denis Dzyubenko on Patreon.
This probably avoids the situation that caused the exception to be
thrown. It also makes sure that both threads end up canceled in the end,
while before the exception from wait outt could have caused errt to
never be waited on.
Since there's a race here, and since Kyle saw an exception leak out,
which I have not been able to reproduce that. See my comment for what
I think might be going on.
Note that, I used tryNonAsync, because it seems a later tryNonAsync
caught the exception. I don't actually understand how it did, as I
understand exception classification, it's the data type, not the way it
was thrown. One possibility is that the async exception may have been wrapped
in some other, non-async exception, and Show displayed it the same way.
the encode' and decode' functions on Windows should not apply the
filesystem encoding, which does not work there. Instead, convert to and
from UTF-8.
Also, avoid exporting encodeW8 and decodeW8. Both use the filesystem
encoding, so won't work as expected on windows.
Eliminated some dead code. In other cases, exported a currently unused
function, since it was a logical part of the API.
Of course this improves the API documentation. It may also sometimes
let ghc optimize code better, since it can know a function is internal
to a module.
364 modules still to go, according to
git grep -E 'module [A-Za-z.]+ where'
Remote.S3 and Remote.Helper.Http both had similar code to sink a
http-conduit Response to a file; refactor out sinkResponseFile.
downloadC downloads an url to a file using http-conduit, and supports
resuming. Falls back to curl to handle urls that http-conduit does not
support. This is not used yet, but the goal is to replace download with
it.
git-annex.cabal: conduit-extra was not actually used for a long time,
remove the dep. conduit moves into the main dependency list, but since
http-conduit was already in there, and it depends on conduit, that's not
really adding a new build dep.
This commit was supported by the NSF-funded DataLad project.
Noticed that getting a key whose size is not known resulted in a
progress display that didn't include the percent complete.
Fixed for P2P by making the size sent with DATA be used to update the
meter's total size.
In order for rateLimitMeterUpdate to also learn the total size,
had to make it be passed the Meter, and some other reorg in
Utility.Metered was also done so that --json-progress can construct a
Meter to pass to rateLimitMeterUpdate.
When the fallback rsync is done, the progress display still doesn't
include the percent complete. Only way to fix that seems to be to let rsync
display its output again, but that would conflict with git-annex's
own progress meter, which is also being displayed.
This commit was sponsored by Henrik Riomar on Patreon.
Removed dependency on MissingH, instead depending on the split
library.
After laying groundwork for this since 2015, it
was mostly straightforward. Added Utility.Tuple and
Utility.Split. Eyeballed System.Path.WildMatch while implementing
the same thing.
Since MissingH's progress meter display was being used, I re-implemented
my own. Bonus: Now progress is displayed for transfers of files of
unknown size.
This commit was sponsored by Shane-o on Patreon.
Display progress meter on send and receive from remote.
Added a new hGetMetered that can read an exact number of bytes (or
less), updating a meter as it goes.
This commit was sponsored by Andreas on Patreon.
Had everything available, just didn't combine the progress meter with the
other places progress is sent to update it. (And to a remote repo already
did show progress.)
Most special remotes should already display progress meters with -J,
same as without it. One exception to this is the web, since it relies on
wget/curl progress display without -J. Still todo..
I don't quite understand the cause of the deadlock. It only occurred
when git-annex-shell transferinfo was being spawned over ssh to feed
download transfer progress back. And if I removed this line from
feedprogressback, the deadlock didn't occur:
bytes <- readSV v
The problem was not a leaked FD, as far as I could see. So what was it?
I don't know.
Anyway, this is a nice clean implementation, that avoids the deadlock.
Just fork off the async threads to handle filtering the stdout and stderr,
and let them clean up their handles whenever they decide to exit.
I've verified that the handles do get promptly closed, although a little
later than I would expect. Presumably that "little later" is what
was making waiting on the threads deadlock.
Despite the late exit, the last line of stdout and stderr appears where
I'd want it to, so I guess this is ok..
Stderr reader blocks waiting for all stderr, and so blocks the process ever
exiting.
I tried several ways to get around this, but no success yet. For now,
disable the stderr reader entirely.
It sounds worse than it is. ;)
Some external special remotes may run commands that display progress on
stderr. If git-annex is run with --quiet, this should filter out such
displays while letting the errors through.
Came up with a generic way to filter out progress messages while keeping
errors, for commands that use stderr for both.
--json mode will disable command outputs too.
hGetSomeString reads one byte at a time, so unicode bytes are not composed.
The problem comes when outputting that to the console with hPut; that
tried to apply the handle's encoding, and so we get mojibake.
Instead, use ByteStrings, and only convert it to a string for parsing, not
for display.
Note that there are a couple of other things that use hGetSomeString,
which I've left as-is for now.
This should be essentially no-op change for hGetContentsMetered, since it
always gets the entire contents. So the only difference is that each chunk
of the lazy bytestring will always be the full chunk size. So, I'm pretty
sure this is safe. Also, the only current users of hGetContentsMetered are
reading files, so the stream won't block for long in the middle.
The improvement is that hGetUntilMetered will always get some multiple of
the defaultChunkSize. This will allow the S3 multipart code to pick a fixed
size and know that hGetUntilMetered will really get that size.
(cherry picked from commit bd09046291)
This only performs some basic tests so far; no testing of chunking or
resuming. Also, the existing encryption type of the remote is used; it
would be good later to derive an encrypted and a non-encrypted version of
the remote and test them both.
This commit was sponsored by Joseph Liu.
Leverage the new chunked remotes to automatically resume downloads.
Sort of like rsync, although of course not as efficient since this
needs to start at a chunk boundry.
But, unlike rsync, this method will work for S3, WebDAV, external
special remotes, etc, etc. Only directory special remotes so far,
but many more soon!
This implementation will also properly handle starting a download
from one remote, interrupting, and resuming from another one, and so on.
(Resuming interrupted chunked uploads is similarly doable, although
slightly more expensive.)
This commit was sponsored by Thomas Djärv.
Not yet used by any special remotes, but should not be too hard to add it
to most of them.
storeChunks is the hairy bit! It's loosely based on
Remote.Directory.storeLegacyChunked. The object is read in using a lazy
bytestring, which is streamed though, creating chunks as needed, without
ever buffering more than 1 chunk in memory.
Getting the progress meter update to work right was also fun, since
progress meter values are absolute. Finessed by constructing an offset
meter.
This commit was sponsored by Richard Collins.
This has not been tested at all. It compiles!
The only known missing things are support for encryption, and for get/set
of special remote configuration, and of key state. (The latter needs
separate work to add a new per-key log file to store that state.)
Only thing I don't much like is that initremote needs to be passed both
type=external and externaltype=foo. It would be better to have just
type=foo
Most of this is quite straightforward code, that largely wrote itself given
the types. The only tricky parts were:
* Need to lock the remote when using it to eg make a request, because
in theory git-annex could have multiple threads that each try to use
a remote at the same time. I don't think that git-annex ever does
that currently, but better safe than sorry.
* Rather than starting up every external special remote program when
git-annex starts, they are started only on demand, when first used.
This will avoid slowdown, especially when running fast git-annex query
commands. Once started, they keep running until git-annex stops, currently,
which may not be ideal, but it's hard to know a better time to stop them.
* Bit of a chicken and egg problem with caching the cost of the remote,
because setting annex-cost in the git config needs the remote to already
be set up. Managed to finesse that.
This commit was sponsored by Lukas Anzinger.
There was confusion in different parts of the progress bar code about
whether an update contained the total number of bytes transferred, or the
number of bytes transferred since the last update. One way this bug
showed up was progress bars that seemed to stick at zero for a long time.
In order to fix it comprehensively, I add a new BytesProcessed data type,
that is explicitly a total quantity of bytes, not a delta.
Note that this doesn't necessarily fix every problem with progress bars.
Particularly, buffering can now cause progress bars to seem to run ahead
of transfers, reaching 100% when data is still being uploaded.
